Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Andrsv | Posted: | Sep 15, 2022 17:15 | Subject: | Re: UK VAT....charged or not? How do I ship? | Viewed: | 30 times | Topic: | Selling | |
|
| In Selling, waltzking writes:
| In Selling, Nubs_Select writes:
| if its over like 150 EURO or something bricklink doesn't collect vat
|
Seems it is right in that range, so probably so (buyer paid USD). But still,
why will the shipping services not let me bypass the VAT requirement? Guess
I'll need to talk to them.
Thanks for the clarification though on BL side of tings.
Jonathan
|
If you manage to ship, you should inform your customer that he will have to pay
taxes when importing 😉 else he might be suprised
|
|
Author: | Andrsv | Posted: | Sep 4, 2022 17:58 | Subject: | Re: Should I agree to cancel this order? | Viewed: | 53 times | Topic: | Problem Order | |
|
| In Problem Order, Kefir101Awesome writes:
| Hello there,
A rather large domestic ($50 USD) order was confirmed by a completely new buyer,
but then 30 minutes later the buyer made an order cancel request, citing the
reason under, "System Problem", with details "urgent buy, cannot wait for the
pending order". Bricklink says that buyer remorse or finding cheaper prices is
not a valid reason for canceling this order, and this is probably the case here,
but I also do not want to risk receiving negative feedback and ruin my 100% seller
praise. I reached out to the buyer yesterday with a high-priority flag, but no
response. What should I do?
Thank you.
|
Definitive cancel the order and refund if he paid.
|
|
Author: | Andrsv | Posted: | Aug 2, 2022 02:13 | Subject: | Re: Just a general question for sellers! (USA) | Viewed: | 50 times | Topic: | Shipping | |
|
| In Shipping, GoodNiteGrandma writes:
| What is your shipping rate for domestic orders? It seems USPS is going up a little
bit through the last couple years (which is understandable) I charge $4 for any
order which I can end up losing money on shipping but I feel like keeping a low
and steady shipping rate helps sales come in. Just wondering other sellers thoughts.
-Danny
|
I have a fixed rate which is a bit below what it costs to send 350g. This way
I earn some on shipping for small orders (needed as it takes some time to pack,
envelope cost, delivering at post office etc). I loose some money on large orders
which is fine as I get my profit on the actual parts.
Hope this helps, good luck
|
|
Author: | Andrsv | Posted: | Jun 23, 2022 06:13 | Subject: | Re: Missing Orders | Viewed: | 37 times | Topic: | Problem Order | |
|
| In Problem Order, atlhutch1 writes:
| Due to their lot limit, I have several orders placed with Bricks4Pieces (898).
The orders were supposedly shipped on 06/12/22, but even living in the same
state, I still have not received the orders and now I find out that they have
been suspended! I need to know how do I either get my merchandise or get my
money back? We are talking about 12 orders!
Kathy Hutchins
|
Open a dispute in PayPal
|
|
Author: | Andrsv | Posted: | Apr 21, 2022 05:58 | Subject: | 29% off most of our inventory. | Viewed: | 69 times | Topic: | Sales | |
|
| https://store.bricklink.com/Andrsv
We have a time limited sale of all our inventory, most items are 29% off.
About us:
- Norways largest variety of bricks
- ship to most countries
- accept paypal and stripe (Credit cards)
- accept USD and NOK
- instant checkout
- 99.82% customer satisfaction
Get everything from one store. Welcome 😀
|
Author: | Andrsv | Posted: | Mar 29, 2022 15:08 | Subject: | Re: $0.01 non payable fee | Viewed: | 52 times | Topic: | Help | |
|
| In Help, 1001bricks writes:
| | Anyone know what will happen when I don't pay the $0.01 fee?
|
Normally it's death penalty - but you may deal 30 years with no possibility
of parole.
Hoping it helps
|
Uh oh.
Thanks for the heads up. Where can I hide? Maybe under a large pile of lego 😀
|
|
Author: | Andrsv | Posted: | Mar 29, 2022 15:06 | Subject: | Re: $0.01 non payable fee | Viewed: | 49 times | Topic: | Help | |
|
| In Help, Admin_Russell writes:
| In Help, Andrsv writes:
| I noticed on my profile page it says I have $0.01 unpaid fee. However, when I
got to the Fee's payment page it says $0.00, and the pay button is disabled.
I've already paid my fees for this month, but I got afraid bricklink will
ban me for the unpaid fee.
Anyone know what will happen when I don't pay the $0.01 fee?
|
I erased it. This is known bug and we will always remove the fee for you if this
happens.
|
Thanks
|
|
Author: | Andrsv | Posted: | Mar 24, 2022 16:51 | Subject: | $0.01 non payable fee | Viewed: | 166 times | Topic: | Help | |
|
| I noticed on my profile page it says I have $0.01 unpaid fee. However, when I
got to the Fee's payment page it says $0.00, and the pay button is disabled.
I've already paid my fees for this month, but I got afraid bricklink will
ban me for the unpaid fee.
Anyone know what will happen when I don't pay the $0.01 fee?
|
|
Author: | Andrsv | Posted: | Mar 24, 2022 01:48 | Subject: | Re: Box with no piece count | Viewed: | 50 times | Topic: | General | |
|
| In General, C0lsanders_ writes:
| I'm not the expert here, but I've heard that US sets have the piece count,
but those produced for Europe don't. Hopefully someone else may chime in
and confirm/deny that.
Miles (C0lsanders_)
|
In norway (europe) sets have the piece count
|
|
Author: | Andrsv | Posted: | Mar 3, 2022 13:08 | Subject: | Re: How much to pay sorters? | Viewed: | 56 times | Topic: | Off Topic | |
|
| In Off Topic, axaday writes:
| In Off Topic, The_BrickRoom writes:
| Hey everyone! I was wondering how much do you guys pay sorters? I'm trying
to make a chart of how much the average person pays. Thanks in advance! And if
you have any catalogers how much you pay them. If I collect enough data I will
share if people want.
-Phil
|
I give my sorter a set to build now and then and odds and ends pieces that she
likes while sorting.
I also give her room and board and rides to wherever she needs to go.
|
I also do all that stuff for my wife, but still she wont sort my lego :/
|
|
Author: | Andrsv | Posted: | Mar 2, 2022 01:17 | Subject: | Re: Brick Seller | Viewed: | 82 times | Topic: | Related Software | |
|
| In Related Software, The_BrickRoom writes:
| So I haven't really heard much about this. (just happened to stumble upon
this) So does anyone use Brick Seller? I am currently using Brick Freedom but
it charges 1% on the order total which I think is a little to much for me an
so was thinking about swiching over to Brick Seller. thoughts anyone.
-Phil
|
I used brickseller a bit, but it didnt quite fit my usage. I needed multiple
storage positions for each lot. Also it automatically made all remarks uppercase.
Also it was rather slow. Other than that it worked Great.
I made my own solution instead
|
|
Author: | Andrsv | Posted: | Mar 1, 2022 14:01 | Subject: | Re: why is it so annoying? | Viewed: | 43 times | Topic: | Searching | |
|
| In Searching, firestar246 writes:
| |
I am mostly annoyed that, when making inventory changes, the search box no longer
stays on the search inventory setting like it used to do. It takes far more
clicks than it should to go from one inventory item to another.
|
It stays on the search inventory setting for me.
|
For me too. Did you try another browser?
|
|
Author: | Andrsv | Posted: | Mar 1, 2022 13:54 | Subject: | Re: Lost another customer... need bank transfers! | Viewed: | 56 times | Topic: | Help | |
|
| In Help, mkim05 writes:
| I managed to get 6 positives in the past 3 months, mostly from overseas buyers...
but in the meantime, I feel like I need to making a good first impression...
and instead I'm having to keep turning people away.
|
You got 7 positive(as seller) in past 2 months.
Increase inventory or decrease price and sales will grow faster
|
Author: | Andrsv | Posted: | Mar 1, 2022 03:28 | Subject: | Re: why is it so annoying? | Viewed: | 60 times | Topic: | Searching | |
|
| +1 |
|
Author: | Andrsv | Posted: | Feb 26, 2022 17:16 | Subject: | Re: Should I keep the boxes for my sets? | Viewed: | 37 times | Topic: | General | |
|
| In General, LegoJay76 writes:
| Hello.. new here to the community forums. I'm currently in my 50's and
I've been collecting sets on and off since I was about 7. I have several
hundred sets and I've got about 90% of the boxes for those sets as well.
Boxes are all in good to excellent condition as I always opened from the ends.
I literally have a closet full of just boxes as most of my sets are on display
in my Lego room. Wife however has been asking me to open up some storage space
in the house for my other projects. I'm wondering how important it is to
keep the boxes for my sets and if they add any value to the collectors out here
should the wife win and I end up having to sell off some of my collection?
Thanks in advance.
|
Some old boxes are worth hundreds of dollars. Search for the set number on bricklink
and you will find an entry for the box
|
|
Author: | Andrsv | Posted: | Feb 25, 2022 08:11 | Subject: | Re: Sort by seller on Items for sale tab on part | Viewed: | 9 times | Topic: | Suggestions | |
|
| In Suggestions, biker72 writes:
| Hi all,
Is it possible to add a sort option on seller in the Items For Sale tab on the
parts page?
At this point of time each color is seperately shown as intended.
As I am often looking for more colors of the same part it is convenient if I
can sort on seller. So I can easily see if a certain seller has more than one
color available.
Regards,
Dennis
|
Sounds like you should create a wanted list and add all needed parts there
then you can search for sellers who has all parts you need, much more convinient
|
|
Author: | Andrsv | Posted: | Jan 25, 2022 16:59 | Subject: | Minifigure search tool - avSearch | Viewed: | 86 times | Topic: | General | |
|
| Hi,
I made a minor mistake with the previous release of avSearch. I'm very thankful
for all the feedback you guys gave in PM when it was down
I finally spent the time to fix it. It should now be up running again. In case
it still doesn't work for you, try pressing "ctrl-F5" to force refresh the
page.
For those who use the hidden tools on the page, it now has a new version (item
v2) of the item pages which makes it easier to keep track of multiple storage
locations for lots in your inventory.
avSearch is based on goatleg. A special thanks to "62 Bricks" who shared the
sourcecode for goatleg.
|
|
|
Author: | Andrsv | Posted: | Jan 16, 2022 03:26 | Subject: | Re: 7 days without invoice, what do I do? | Viewed: | 43 times | Topic: | Problem Order | |
|
| In Problem Order, musen2100 writes:
| Hello everyone.
Jan 9 I placed an order at a store, where I had asked that seller before placing
the order if they could send it with priority mail instead of having it tracked
(cheaper). They accepted and I can see on the order I placed that the seller
have updated the shipping cost with the correct price, however I have not been
invoiced yet. January the 14th, 5 days after placing the order I tried contacting
the seller and asking for an invoice, however as of today I still haven't
received a response even though I can see they have read the message. They payment
method is PayPal (Onsite), but I have no idea what to do since the seller seems
to ignore me. What can I do?
Any help is appreciated, thanks for reading.
|
There may be a pay now button on the orders overview page (right side of the
table)
|
|
Author: | Andrsv | Posted: | Jan 4, 2022 03:54 | Subject: | Re: What am I not getting? | Viewed: | 64 times | Topic: | Selling | |
|
| | Hi Dave, that's a very time consuming setup you have there. Honnestly I wouldn't
want to have to do orders that way.
You need storage cabinets with hundreds of drawers and/or top open bins for large
quantities items.
I know it's a important investment, but it pays in the long run time wise.
|
+1
|
Author: | Andrsv | Posted: | Jan 2, 2022 16:54 | Subject: | Re: API address | Viewed: | 43 times | Topic: | Off Topic | |
|
| In Off Topic, smileysbricks writes:
| Does anyone have an easy way to access their store API address, please?
Thank you in advance.
|
I havent found it yet... its not the only thing missing in bricklink api...
|
|
Author: | Andrsv | Posted: | Dec 27, 2021 18:06 | Subject: | Re: Order wrong content, seller not responding | Viewed: | 62 times | Topic: | Problem Order | |
|
| In Problem Order, goosestore writes:
| I ordered some pieces at a Belgian shop with 98,46% praise.
When I recieved the package it had the wrong content. A paper with a different
ordernumber was included.
I guess my order was switched with somebody else’s.
I sent three e-mails through bricklink and three private e-mails, but no response.
Maybe seller doesn’t check his mails during this holiday season, but it has almost
been a week now.
What should I do?
|
Maybe the paper included the email address of the correct recipient? You could
try there, maybe he got your lego
Also you can file a NO Shipping Seller and ask for a paypal dispute.But I suggest
to wait a bit more since its holidays
|
|
Author: | Andrsv | Posted: | Dec 19, 2021 19:17 | Subject: | Re: Unusual 2 x 4’s, slotted bricks, hollow brick | Viewed: | 80 times | Topic: | Wanted | |
|
| In Wanted, Stuart9 writes:
| Thought I’d put a speculative request out for anything that is not already listed.
Looking for unusual 2 x 4 bricks in the 3001old range, especially trans clear
with split/slotted tubes.
Unusual 3001’s.
bslot range, all sizes, all colours.
bhol range, all sizes, all colours.
Any marbled versions of items above.
Japanese OLO Lego, all types and colours.
|
I still havent listed mine which I recently got. I guess its around 50 2x4 bricks
from the 50s. As far as I can remember there was no transparent. Youve already
seen pictures of few of them in the other thread. Picture is representative
for the quality. Let me know in pm if youre interested and I can send some pictures
😀 I think all except 1 had lego logo.
|
|
Author: | Andrsv | Posted: | Dec 19, 2021 19:12 | Subject: | Re: Is this old brick lego? | Viewed: | 40 times | Topic: | Help | |
|
| In Help, patpendlego writes:
| In Help, Andrsv writes:
| I bought a lot of old lego bricks. There was about 50 2x4 bricks. As far as I
can tell they were all lego. But there is one brick which stands out. It doesnt
have a logo. Also when dropping it gently to a wooden table, it makes a metallic
sound. It looks and feels like plastic.
Its the red one in pictures.
Does anyone know what it is?
|
You can see on the picture that the red brick is a bit higher than the lego bricks,
which I have not seen on old lego bricks.
Also a metallic sound, or a sound as if it was made of glass, is not found in
lego bricks.
IMO it is not lego. My best guess is still ABC Copex.
|
You might be right. Sound could be of glass, not metal. Its interesting to hear
your insight. Now Im really confused wether I can list it or not and with what
description
|
|
Author: | Andrsv | Posted: | Dec 17, 2021 17:38 | Subject: | Re: Is this old brick lego? | Viewed: | 30 times | Topic: | Help | |
|
| In Help, patpendlego writes:
| In Help, Andrsv writes:
| I bought a lot of old lego bricks. There was about 50 2x4 bricks. As far as I
can tell they were all lego. But there is one brick which stands out. It doesnt
have a logo. Also when dropping it gently to a wooden table, it makes a metallic
sound. It looks and feels like plastic.
Its the red one in pictures.
Does anyone know what it is?
|
It sounds like ABC Copex
|
Ive never heard about ABC Copex. I did a Google search. It could be this as the
rest of the lot was from mid 50s, and ABC Copex also sold sets at this time.
However, from the pictures it looks like ABC Copex has taller studs. Am I right?
My bricks studs seems to be the same height as lego.
|
|
Author: | Andrsv | Posted: | Dec 16, 2021 18:17 | Subject: | Re: Is this old brick lego? | Viewed: | 69 times | Topic: | Help | |
|
| In Help, Stuart9 writes:
| Does it have any markings underneath, a number, a letter or something else ?
If it has a number then it’s possibly Lego, possibly Prima Lego, if it’s a letter
then it’s what we used to call an x brick or x clone, now known as Bygg Selv
( spelling may be off, keep forgetting ).
|
Thanks, it has the number 8 underneath. Does it have a catalogue entry? The closest
I find is this one which has Lego logo underneath
|
|
Author: | Andrsv | Posted: | Dec 16, 2021 17:59 | Subject: | Is this old brick lego? | Viewed: | 216 times | Topic: | Help | |
|
| I bought a lot of old lego bricks. There was about 50 2x4 bricks. As far as I
can tell they were all lego. But there is one brick which stands out. It doesnt
have a logo. Also when dropping it gently to a wooden table, it makes a metallic
sound. It looks and feels like plastic.
Its the red one in pictures.
Does anyone know what it is?
|
|
Author: | Andrsv | Posted: | Nov 29, 2021 02:24 | Subject: | Re: Duplicate head | Viewed: | 28 times | Topic: | Catalog Requests | |
|
| In Catalog Requests, forestman_xing writes:
| 3626cpb0839 is a duplicate of 3626bpb0839
The head has only appeared once, in the CMF Judgem
|
from the picture it seems like they have different studs
|
Author: | Andrsv | Posted: | Nov 27, 2021 17:48 | Subject: | Re: Buyer paid before order has been invoiced | Viewed: | 42 times | Topic: | Problem Order | |
|
| Get instant checkout, it will remove the problem |
|
Author: | Andrsv | Posted: | Nov 25, 2021 02:23 | Subject: | Re: When are you going to reopen my store? | Viewed: | 66 times | Topic: | Problem | |
|
| In Problem, Dino1 writes:
| Hello Bricklink!
When are you going to reopen my store?
I have always paid my dues. The last payment was on 08/05 for the July contribution.
Until you issue a tax correct invoice, I am not obligated to pay taxes on it.
I pointed this out on the forum over a year ago. By the way, Bricklink's
accounting seems to be in a desolate state. My total of 4 payments were not taken
into account and are always re-invoiced, although I have pointed out the first
2 payments additionally by e-mail.
In addition, I expect the immediate deletion of the note "Reason: non-payment
of fees" on the store page.
This is a lie and also damaging to my reputation. Such a thing is illegal.
Regards
Werner
|
I suggest that you refer to which law and paragraph is saying that your not obligated
to pay taxes.
The same goes about your claim that it is illegal to damage your reputation.
By which law and paragraph is it illegal, and why does the law apply to Bricklink?
|
|
Author: | Andrsv | Posted: | Nov 21, 2021 03:03 | Subject: | Re: Buyer demanded refund on vintage part.... | Viewed: | 72 times | Topic: | Problem | |
|
| In Problem, rainbowmist writes:
| Ok. So a buyer demanded a full refund of a torso because they said a head was
loose on the neck. Plus they did not ask questions before making an order. Buyers
need to do this more especially as a serious collector.
|
I suggest you give a refund. Parts shouldnt be broken Even if they are used.
Information about loose neck can be added to description
|
Author: | Andrsv | Posted: | Nov 15, 2021 17:16 | Subject: | Re: Your next contest! | Viewed: | 25 times | Topic: | Contests | |
|
| 150 |
|
Author: | Andrsv | Posted: | Oct 26, 2021 17:18 | Subject: | Re: Another bug ... scrolling | Viewed: | 30 times | Topic: | Buying | |
|
| In Buying, 1974 writes:
| Oi gang!
I've made an order, no probs. I want to add to that order (the order is open),
but when I get to last page I cannot scroll down enough to hit the "I want moar
LEGO!!!" button
While you cannot see it on my screenshot, the scrollbar is at the bottom
It works on my phone but I like to use my phone for calling people, not buying
LEGO (as the BL interface is craptastic and I hate phones in general)
Is this a known problem?
Cheers,
Ole
|
I sometimes have that problem on my phone...
On computer you can probably zoom out to fix it. (Ctrl -)
|
|
Author: | Andrsv | Posted: | Oct 18, 2021 17:09 | Subject: | Re: INSTANT CHECKOUT | Viewed: | 25 times | Topic: | General | |
|
| In General, pitz8008 writes:
| Is there a way for instant checkout to still be used even if there is no "volume"
listed for an item. I have a bunch of the collectible minifigure sets listed
but most of the newer ones don't have any volume dimensions listed. So I
have to send the invoice manually because instant checkout won't work for
those items. Is there a way too get around this so instant checkout will work
even if there's no volume listed. I've had about 10 of these orders in
the last day and it's like being back in the days of no instant checkout.
I know some people may prefer that but definitely not me.
|
You can manually set the volume for items in your inventory
|
|
Author: | Andrsv | Posted: | Oct 13, 2021 07:32 | Subject: | Re: Is anyone fluent in Github ? | Viewed: | 37 times | Topic: | Related Software | |
|
| In Related Software, peregrinator writes:
| In Related Software, cosmicray writes:
| I need to establish / load a repository, but I keep coming up blank on how to
do this. Are there any BL peeps with skills in this area, that can walk me thru
it ? The sources are java code designed to work with BL downloads / uploads.
|
I'm assuming you already have a Github account?
The easiest way to do it is to create an empty repository on Github, then `git
clone` into an empty directory on your PC, then copy the files you want to track
into that empty directory, `git commit -m "initial upload"` and `git push` (I'm
assuming you don't need multiple branches atm).
|
+1
|
|
Author: | Andrsv | Posted: | Oct 11, 2021 09:40 | Subject: | Re: Overseas shipping to the USA | Viewed: | 38 times | Topic: | Help | |
|
| In Help, RhuntIII writes:
| I made my first overseas purchase recently and was wondering what to expect on
arrival times.
What's the average time for overseas orders to be delivered into the US?
What can we expect now with all our delays in the US ports and the absence of
truckers to deliver in the US interior?
Once my order arrives I'll post my order and delivery dates.
Thanks.
|
When i ship to US with priority shipping it takes 1-12 weeks.
|
|
Author: | Andrsv | Posted: | Oct 1, 2021 01:49 | Subject: | Re: Assembled set. Negative feedback. | Viewed: | 60 times | Topic: | Selling | |
|
| In Selling, Shrapnil writes:
| I am wondering if any sellers have gotten negative feedback when sending out
a set that was already assembled. I had a technic set that was in great condition.
Probably the best looking used set I have ever came across. Stickers were perfect.
Great looking set and yet I still got a negative review because it came fully
assembled. I did not disassemble the item because it was in such good condition.
What do you guys think about this and how do you handle it?
|
You can comment feedback, tell them sorry, you weren't aware that they wanted
disassembled set. Also add a comment to your used sets telling the state of
your set.
You could always send him a message and tell him that your sorry and tell him
that you've taken actions to prevent it from happening in the future. And
ask him to kindly change his feedback if he's changed his mind (give link
and instructions how to do it). Also you could offer some small refund for the
missunderstanding.
|
|
Author: | Andrsv | Posted: | Sep 29, 2021 16:15 | Subject: | Re: Fees gone wild | Viewed: | 77 times | Topic: | Buying | |
|
| In Buying, zorbanj writes:
| See photos. The 2nd photo is from the Terms.
360 lots x 0.5 EUR = 180 EUR in lot fees for 46 EUR of parts.
Ridiculous.
Will forward the name of the store to whoever messages me. Hoepfully one of the
admins reaches out.
|
I've bought from them. In general I seldom buy less than 2€ pr lot. As mentioned
before in this thread. The store is a bulk order store. They also offer parts
to customers who does not buy in bulk, but you'll need to pay for their working
hours...
A 360 lot order would take me 6 hours to pack. Also those parts would take about
12 hours to sort and put in inventory.
I'm also guessing that their actual shipping fee is more than 15€.
It'll be cheaper for you to add more items per lot than to pay their fee
And they do for sure have large lots.
|
|
Author: | Andrsv | Posted: | Sep 15, 2021 15:54 | Subject: | Re: Very strange situation here | Viewed: | 63 times | Topic: | Help | |
|
| I don't know about Italy, but some places in Norway does not have a street
name and also not a house number. I guess when population of the zip code is
less than 100, post service has no need for it...in 2016 Norway tried to give
a street name for everyone, but I don't think they've succeeded yet
|
Author: | Andrsv | Posted: | Aug 26, 2021 16:33 | Subject: | Re: Difficult Customers / Feed back Hostage | Viewed: | 69 times | Topic: | Problem Order | |
|
| A feedback is not hostage. Customers who care about 0.3% negative feedback are
probably customers you don't want in your store anyway. You can even reply
to the feedback and tell your side of the story. Don't worry about 1 or 2
negative I'd still buy from you
|
|
Author: | Andrsv | Posted: | Aug 26, 2021 04:44 | Subject: | Re: Old lego set from 1974 | Viewed: | 36 times | Topic: | General | |
|
| In General, Blodram writes:
| Hi i was wondering how much would 1974 lego sets costs, i have several of them
at home but i cant find any price in here on this page. Ive got for example set
number 190 and 200 and lot of 1974 lego star sets.
|
Set 190 costs $45 - $200 here, but Noone bought it last 6 months.
Set 200 cost 25€, but haven't been sold last 6 months
|
Author: | Andrsv | Posted: | Aug 23, 2021 00:54 | Subject: | Re: Your next contest! | Viewed: | 19 times | Topic: | Contests | |
|
| 146 |
|
Author: | Andrsv | Posted: | Aug 22, 2021 08:51 | Subject: | Re: Developer wanted | Viewed: | 66 times | Topic: | General | |
|
| In General, phual writes:
| Hi all
I'm looking for a developer to do some work for us. Initially it's a
small piece of work, but may follow onto larger projects.
Our immediate need is to built a tool to move data to and from BrickLink and
other systems (e.g. RoyalMail api) using the BrickLink and other APIs.
We're not sure exactly where the work will lead, but interface / app
development may become a requirement.
If you think that you can help, drop me a message.
Stuart
|
I'm working as a senior developer and I am running a bricklink store as a
hobby project
Did you plan the details of what you need? Consider possible pitfalls? What do
you plan to pay for it? How should the service be hosted and by who? What about
maintenance?
Best regards,
Anders Vik
|
|
Author: | Andrsv | Posted: | Aug 17, 2021 00:39 | Subject: | Re: Non-Lego bulk purchase... let me explain | Viewed: | 70 times | Topic: | Searching | |
|
| In Searching, FranzLizst writes:
| Greetings friends,
I am an Elementary Music Teacher and I am in need of off-brand blocks. Why?
When I have a star student, instead of giving them pencil or eraser, I want
then to put their name on a block. Then, at the end of the week, our Principal
will pull a block out and that person will win a polybag. There are more details,
but the bottom line, I don't want to have students write on Legos, but I'm
fine with then defacing off-brand. So, if anyone has off-brand legos, I am willing
to purchase them from you at an acceptable price.
Please let me know.
Thank you
Thom Richards
Ridgedale Local Schools
|
I've got a bag of old lego bricks from the 80s. They all got scratches or
dents. It's about 350gram.
I also got about 5kg of various pieces which are mainly lego with scratches,
but there is also some off-brand lego.
Normally I give them to local schools or kindergardens.
I'll send it for shipping cost. 350g is ca $10 to USA.
|
|
Author: | Andrsv | Posted: | Aug 14, 2021 08:09 | Subject: | Re: Time for another contest... | Viewed: | 22 times | Topic: | Contests | |
|
| 1438 |
Author: | Andrsv | Posted: | Aug 12, 2021 02:12 | Subject: | Re: Time for another contest... | Viewed: | 20 times | Topic: | Contests | |
|
| 1437 |
Author: | Andrsv | Posted: | Aug 9, 2021 14:20 | Subject: | Re: Sorting Bulk buy by set | Viewed: | 35 times | Topic: | General | |
|
| If you add all your parts to your inventory, then you can export them from bricklink
and import them to rebrickable. Rebrickable will tell how many parts your missing
from each set.
The sets from bulk lots always miss some parts. Luckily bricklink is here for
you, so you'll eventually find all missing parts.
|
Author: | Andrsv | Posted: | Aug 5, 2021 13:02 | Subject: | Re: Time for another contest... | Viewed: | 20 times | Topic: | Contests | |
|
| 1129 |
Author: | Andrsv | Posted: | Aug 2, 2021 03:56 | Subject: | Re: Am I too picky about yellowed parts? | Viewed: | 58 times | Topic: | Help | |
|
| Good luck with getting a fair refund. Maybe the seller could agree on sending
replacement parts?
No matter how things turn out, remember that you can get those parts white again
by using H2O2 and sun-light
|
Author: | Andrsv | Posted: | Jul 30, 2021 00:50 | Subject: | Re: Time for another contest... | Viewed: | 25 times | Topic: | Contests | |
|
| In Contests, Andrsv writes:
1130
|
Author: | Andrsv | Posted: | Jul 27, 2021 01:36 | Subject: | Re: Time for another contest... | Viewed: | 27 times | Topic: | Contests | |
|
| 1131 |
Author: | Andrsv | Posted: | Jul 24, 2021 11:40 | Subject: | Re: Sorting Used Parts | Viewed: | 53 times | Topic: | Selling | |
|
| In Selling, hkl22 writes:
| Hi everyone,
I have a few large boxes of used lego, all unsorted, and want to list it all.
I'm wondering if anyone has the best idea/way to sort it all, as I want to
be most efficient in my time and cost-effective.
Any suggestions from the store owners that sell mainly used parts?
Thanks,
H DOGG BRICKS
|
I've split parts into about 15 categories. I sort everything by these categories.
Then I sort by specific type. At the end I sort by color.
I've made my own software to calculate price automatically which gives me
minimal work when listing parts.
|
Author: | Andrsv | Posted: | Jul 20, 2021 16:19 | Subject: | Re: 65% off in honor of Olimpic Games! | Viewed: | 39 times | Topic: | Sales | |
|
| Your missing instant checkout and/or quote request |
Author: | Andrsv | Posted: | Jul 14, 2021 02:09 | Subject: | Re: Torso ID | Viewed: | 41 times | Topic: | Help | |
|
| In Help, Brickworld writes:
| In Help, tpr writes:
| In Help, Brickworld writes:
| Can someone ID these two torsos? Thanks
|
Have they got the Lego stamp on the top of the neck piece?
If so, what are the torso base colours?
tpr
|
Checked both torsos and the Lego stamp is on the top of the neck piece. I would
think the torso base color would be reddish brown (left item) and lavender (right
item).
|
Did you try avSearch? http://avbricks.no/#/avSearch
It let's you search for combination of Torso, arm and hand colors.
|
Author: | Andrsv | Posted: | Jul 13, 2021 14:02 | Subject: | Re: Confused here | Viewed: | 45 times | Topic: | Catalog | |
|
| ... That's why I have lots of those unlisted. Thanks |
|
Author: | Andrsv | Posted: | Jun 22, 2021 16:47 | Subject: | Re: XML mass update to delete cost? | Viewed: | 35 times | Topic: | Selling | |
|
| In Selling, SylvainLS writes:
| In Selling, runner.caller writes:
| In Selling, SylvainLS writes:
| In Selling, runner.caller writes:
| I'm attempting to amortize all the costs of my parts into my minifigures
and it's easy enough to do in excel and xml, but when I go to upload the
new costs of the parts to $0.00, I get an error message.
1. My Cost cannot be zero
Why can my cost not be Mass Inventory Updated to $0 ?
|
What if you don’t include the field (row) at all? (Let it use the default value.)
|
Tried that, but then it just remains unchanged so if that inventory lot already
had cost, then it will still have its old cost.
|
Ah, yes, the default value is the old value, so rather useless
| However, I found a workaround! I just enter in a cost with a bunch of zeros after
the decimal and it uploads as $0.000 cost without erroring out.
|
So the test is on integer 0 (or even string “0”), not floatting point 0.0. Well,
sometimes little errors have their usefulness
|
I believe what he is saying is that 0.00 won't work. But 0.0000001 will work
and it will round down do 0.00.
If I remember correctly from my previous experience, the check for valid number
checks if number is larger than 0, but rounding to 2 or 3 decimals (depending
on your settings) is done after check.
Something tells me that old bricklink code didn't have much unit tests
|
|
Author: | Andrsv | Posted: | Jun 15, 2021 17:51 | Subject: | Re: Please add "i no longer want this order" | Viewed: | 71 times | Topic: | Feedback | |
|
| In Feedback, Teup writes:
| Hard to believe you seem to have such an extensive amount of experience on BL
yet fail to let people use their legal rights as consumers.
In Feedback, Bricklord writes:
| you just got yourself stoplisted in yet another store. I will thank you however
for at least warning me before I waste my time on you.
In Feedback, Deedesria writes:
| Theres no good way to communicate why i want to cancel my orders sometimes. I
often end up with not enough money, or almost impulse buying sets and changing
my mind. Please add an option that says "I no longer want this order" or something
along those lines
|
|
|
Legal rights depends on country
|
|
Author: | Andrsv | Posted: | Jun 15, 2021 17:50 | Subject: | Re: Please add "i no longer want this order" | Viewed: | 91 times | Topic: | Feedback | |
|
| In Feedback, Deedesria writes:
| Theres no good way to communicate why i want to cancel my orders sometimes. I
often end up with not enough money, or almost impulse buying sets and changing
my mind. Please add an option that says "I no longer want this order" or something
along those lines
|
You are mistaking "checkout" with "wanted list".
|
|
Author: | Andrsv | Posted: | Jun 9, 2021 17:58 | Subject: | Re: Who Pays to Reship Returned Int'l Order? | Viewed: | 68 times | Topic: | Shipping | |
|
| In Shipping, zorbanj writes:
| In Shipping, Andrsv writes:
|
I can't see that your store terms says that you ship to PayPal address. Was
his bricklink address also wrong? If not, then it's seller who did a mistake.
I would also blame seller even if terms said that you ship to PayPal address.
From the eyes of a buyer, he added his shipping address in bricklink, he buys
from bricklink. Invoice says it will be shipped to bricklink address. When paying,
he doesn't see his PayPal address which could have been added years ago.
I'd say that it's sellers responsible to verify that PayPal address and
bricklink address are the same before shipping to PayPal address.
|
I disagree. Sellers *must* ship to the PayPal address or they lose seller protection.
If you do not ship to the PayPal address, the buyer can open a PayPal case and
the seller will automatically lose even if the shipping status shows that the
package was delivered to the "updated" address. This is a common scam.
Buyer is fully responsible for ensuring that the shipping address is correct
for PayPal and Bricklink. I don't see why the seller should assume this role.
|
From a sellers perspective it makes sense to send to PayPal address.
From a buyer perspective (at least here in Norway) it makes sense that it is
sent to bricklink address.
Regarding a PayPal claim PayPal will take side according to PayPal shipping address.
Regarding a bricklink claim bricklink will take side according to Bricklink shipping
address.
What if customer pays with something else than PayPal, where should the seller
send it?
If seller should always send to PayPal address, then why does bricklink have
addresses for buyers?
Why does the invoice say that items will ship to bricklink address?
If seller wants to be safe, he have to check both addresses. And if he doesn't
check both then he'll have to accept the risk of it.
If you order something from lego.com: if you have recently moved and your credit
card is still registered with your old address, but you provide the new and
correct address to lego.com. Who's fault would it be if Lego send your package
to your old credit-card address?
I buy and sell on bricklink.
|
|
Author: | Andrsv | Posted: | Jun 4, 2021 23:39 | Subject: | Re: Who Pays to Reship Returned Int'l Order? | Viewed: | 68 times | Topic: | Shipping | |
|
| In Shipping, NedsBrickShop writes:
| I shipped an order (from USA) to Mexico a couple weeks ago. The shipping cost
was over $50, which the buyer paid. I just got the notification that the package
is being returned to me "because it could not be delivered as addressed."
I entered the shipping address in PayPal exactly as it appears on the BrickLink
order, so the fault is not mine. The buyer has made a slight change to his shipping
address and wants me to resend it. But now I'm worried about who's going
to pay for it? If I tell the buyer to pay another $50, I fear they will balk
and want a refund instead of reshipment. Then I am out $50 anyway.
Fellow sellers, what do you think is the right course of action?
|
I can't see that your store terms says that you ship to PayPal address. Was
his bricklink address also wrong? If not, then it's seller who did a mistake.
I would also blame seller even if terms said that you ship to PayPal address.
From the eyes of a buyer, he added his shipping address in bricklink, he buys
from bricklink. Invoice says it will be shipped to bricklink address. When paying,
he doesn't see his PayPal address which could have been added years ago.
I'd say that it's sellers responsible to verify that PayPal address and
bricklink address are the same before shipping to PayPal address.
If he did provide wrong address in bricklink as well, then it's his fault.
In such case I guess you would win claims both in PayPal and bricklink, so if
he wants to cancel then I guess you would keep the 50$ and refund the rest.
I've had similar case, it ended up with customer paying for the extra cost
and he got his parts, I gave him a coupon for his loss, as far as I know he was
happy about it and I didn't loose much.
|
|
Author: | Andrsv | Posted: | May 31, 2021 18:33 | Subject: | Re: Marketplace Panel meeting minutes | Viewed: | 80 times | Topic: | Administrative | |
|
| When prioritizing something, then something else is unprioritized. Finding things
to prioritize is easy. The difficult part is to unprioritize less important stuff.
If you do not unprioritize anything, then you'll loose.
I'm very interested to hear about what you decided to unprioritize
Good luck and thanks for bringing customers to the discussion table
|
Author: | Andrsv | Posted: | May 28, 2021 18:08 | Subject: | Re: BRAVO on the BrickLink Catalog Newsletter!!! | Viewed: | 45 times | Topic: | General | |
|
| In General, SnarkBricks writes:
| Just received the BrickLink Catalog Newsletter email...
Thank you!!! I think this is a wonderful to update Store owner's of what's
going on!!
Tom and Cindy of Snark Bricks
|
+1
|
Author: | Andrsv | Posted: | May 28, 2021 13:31 | Subject: | Re: Lego? Part id? | Viewed: | 42 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Stuart9 writes:
| Look like they are from the game Mousetrap.
In Catalog Identification, firestar246 writes:
| I'm pretty sure those mice, while adorable, are not lego.
|
|
Thanks, Could be, I guess they came with a lego lot. I'll put them away then.
|
Author: | Andrsv | Posted: | May 28, 2021 13:21 | Subject: | Re: Lego? Part id? | Viewed: | 35 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, firestar246 writes:
| I'm pretty sure those mice, while adorable, are not lego.
|
I agree thanks
|
Author: | Andrsv | Posted: | May 28, 2021 01:03 | Subject: | Re: Lego? Part id? | Viewed: | 27 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, randyf writes:
| In Catalog Identification, Andrsv writes:
| I couldn't find Id for these parts. Some of them are probably not lego.
I appreciate any help
|
|
Thanks I thought this was a scorpion tail
|
Author: | Andrsv | Posted: | May 28, 2021 01:02 | Subject: | Re: Lego? Part id? | Viewed: | 33 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Nubs_Select writes:
Thanks I was searching for monkey and couldn't find it :/
|
|
Author: | Andrsv | Posted: | May 28, 2021 01:01 | Subject: | Re: Shipped is missing from drop down | Viewed: | 32 times | Topic: | Help | |
|
| In Help, Steverd writes:
| I was trying to mark an order SHIPPED, But it's not an option in the drop
down box.
I've already added the tracking number.
Have you seen this before? How can I fix this and change from Packed to Shipped?
Thank you
Steve
|
Either you or the customer has to register that it has been paid before you can
change status to shipped.
If you have verified in your PayPal account that customer paid, then simply change
status to paid, then change status to shipped
|
Author: | Andrsv | Posted: | May 27, 2021 17:00 | Subject: | Lego? Part id? | Viewed: | 110 times | Topic: | Catalog Identification | |
|
| I couldn't find Id for these parts. Some of them are probably not lego.
I appreciate any help
|
|
|
Author: | Andrsv | Posted: | May 25, 2021 12:56 | Subject: | Re: Tire Sorting Guide | Viewed: | 31 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, jennnifer writes:
| Hello all,
I have updated my Common Tire Sorting Guide:
https://www.dropbox.com/s/mfflmbrgrwq660d/LEGO%20Common%20Tire%20Sorting%20Guide%202021.pdf?dl=0
It's meant to help you sort out all those pesky tires quickly and accurately.
Remember to be sure that you print it out actual size if you want to be able
to just line your parts up with the images on the page.
Please let me know if you have any suggestions for improvements or notice any
errors that need fixing! If the dropbox download isn't working for you, just
send me a message to get a direct copy.
Take care,
Jen
|
That looks great thanks!
Is it OK if I put a link to it from my website avbricks.no?
|
|
Author: | Andrsv | Posted: | May 23, 2021 02:09 | Subject: | Re: What is the point of Bricklink ? | Viewed: | 95 times | Topic: | Selling | |
|
| In Selling, alexbinary writes:
| In Selling, CSC writes:
| In Selling, alexbinary writes:
| Hi friends, I need your help. I am trying to figure out where the value of Bricklink
lies for buyers. It seems to me that you get better value by buying sets directly
from LEGO. So what makes people buy on Bricklink ?
Thanks for your help !
|
Why pay 100 Dollars for a set when you need a couple of parts that cost you 5
Dollars on Bricklink?
Questin answered
|
Thanks for your answer. I see what you mean, but it seems to me that by doing
so, in the long run you pay a much higher price per part than you would have
if you had bought a set that contains all the parts you want. Personnally, as
a buyer on a tight budget, this makes me somewhat uncomfortable.
|
If there was 1000 different lego parts then you could probably do what you suggest.
But by buying that 100$ set you'll end up with hundreds of parts you'll
never use.
|
|
Author: | Andrsv | Posted: | May 23, 2021 02:06 | Subject: | Re: What are my business options on Bricklink ? | Viewed: | 51 times | Topic: | Selling | |
|
| In Selling, alexbinary writes:
| Hi folks, let’s say I want to make a business selling LEGO on BrickLink. What
are my options ? What works best ? Should I buy sets from LEGO and sell the parts
individually ? Should I buy sets and resell them directly ? Should I buy parts
from other BL sellers and resell them at higher prices ? Other options ?
Thanks for your help.
|
Depends alot on what inputs you have and what outputs you expect
|
|
Author: | Andrsv | Posted: | May 17, 2021 14:46 | Subject: | Re: These don't normally get too far but .... | Viewed: | 65 times | Topic: | Suggestions | |
|
| In Suggestions, MrPetovan writes:
| To give more context to my answer, I'm this close to pull something like
this:
https://twitter.com/dreams_of_sloth/status/1377051721655066629
robin @dreams_of_sloth on March 30th 2021 8:14 PM
| the first thing our new hire did was fix a bug that's been bugging him forever as a user prior to joining.
he then breathed a sigh of relief and submitted his two weeks' notice. wtf??
|
|
Haha
|
|
Author: | Andrsv | Posted: | May 17, 2021 11:24 | Subject: | Re: BEWARE OF PAYPAL | Viewed: | 92 times | Topic: | Help | |
|
| In Help, Ceevee369 writes:
| So, after selling a few sets on BL, I wanted PayPal to update my Full name to
comply with the local bank policies as to redraw 2000 USD of funds back to my
bank account.
What happened was not what I expected:
The message I sent through PayPal messaging got deleted (woosh - no trace anymore)
and instead - they RESTRICTED my account, asking to submit proof of last
6 transactions, tracking codes, purchase invoices etc.
I really don't get it why they are taking such an actions
Anyone had similar issues, and how can this be resolved?
Thanks
Chris @ bricklover1966
|
If you were a criminal and managed to hack into someone's PayPal account,
what would you do?
If you were PayPal and wanted to prevent people stealing money from other peoples
account, what would you do?
In my opinion you acted as a criminal on your own PayPal account and PayPal is
protecting your money to prevent what seems like a theft. You should send the
requested documentation and thank them for protecting your money
|
|
Author: | Andrsv | Posted: | Mar 1, 2021 05:52 | Subject: | Re: Glued Torso and pants | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, Andrsv writes:
| Is there any good way to check if it can come from Keychain /magnet?
When I look at sets/minifigs/parts where it is included - there is no magnet/Keychain
in any of the lists.
|
Found it
[p=853087]
But I can't find any connection between the 2... Is it incomplete catalog,
or doesn't the catalog do this kind of relationship connections?
|
Author: | Andrsv | Posted: | Mar 1, 2021 05:49 | Subject: | Re: Glued Torso and pants | Viewed: | 27 times | Topic: | Catalog | |
|
| Is there any good way to check if it can come from Keychain /magnet?
When I look at sets/minifigs/parts where it is included - there is no magnet/Keychain
in any of the lists.
|
Author: | Andrsv | Posted: | Mar 1, 2021 03:22 | Subject: | Glued Torso and pants | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
|
| I noticed a store who is selling Torso's as NEW with description "pants are
glued to Torso".
I checked the same Torso from other sellers, and no other described it as glued
with pants.
Are Torso's and pants sometimes factory glued without the rest of the minifig
parts also glued?
|
Author: | Andrsv | Posted: | Jan 26, 2021 03:13 | Subject: | Re: Making it clear you're about to order | Viewed: | 58 times | Topic: | Suggestions | |
|
| I agree with you.
However, some stores has "instant checkout" which let's customers know the
shipping price in advance. If you prefer this, then look for stores with a lightning
bolt icon.
|
|
Author: | Andrsv | Posted: | Jan 3, 2021 19:59 | Subject: | Re: 8860 "Car Chassis" | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, peregrinator writes:
| I had this set when it was brand new, and I'm pretty certain that the Expert
Builder version sold in the United States was called the "Auto Chassis"
and not "Car Chassis". It's also identified as such in the 1982 Dealer Catalog
for the USA: https://images.brickset.com/library/Catalogues/c82usdc.pdf
Does anyone else of a certain *ahem* age remember what it was sold as back then?
Is there a reason BL settled on calling it the "Car Chassis" (which I think is
the name it was sold under in the UK)?
|
I bought and sold one a couple of years ago. I think it was named Car Chassis
on the box. NO version
|
|
Author: | Andrsv | Posted: | Dec 30, 2020 09:54 | Subject: | Re: Include Shipping Costs | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, bwk4s writes:
| This is an international market and each store has their own shipping rules.
PLEASE find a way to automatically include shipping costs before we request to
buy. You have our zip codes. Automate it. I don't like wasting sellers time
when shipping is outlandish
|
It allready exist.
You can filter stores which has instant checkout (lightning bolt).
Some stores don't want it.
|
|
Author: | Andrsv | Posted: | Nov 20, 2020 17:37 | Subject: | Re: Need help with this screen display | Viewed: | 24 times | Topic: | Catalog | |
|
| In Catalog, AZClickyBrix writes:
| I have had this sitting on my desk for over a month and can't seem to find
it in the catalog... Does anyone know what set this belongs with?
|
Next time you may use http://avbricks.no/#/avSearch (based on goatleg) to find
it
|
|
Author: | Andrsv | Posted: | Oct 18, 2020 02:28 | Subject: | Re: Inventory being deleted by BL unfairly? | Viewed: | 67 times | Topic: | Inventories | |
|
| | In Inventories, dreambuilder71 writes:
| So I find that each time I listed a minifig that was brand new, but missing a
part like an accessory that was in the picture of the fig, like a shoulder piece
or cape, BL in the next day or so would remove it. We can't list figs as
new but incomplete or complete because BL never was set up like that. So BL
deleted my fig post saying it was against the rules but of course no explanation.
Do we really have to list a brand new fig as used, or as parts when it's
missing something like a cape or skirt???
When it gets deleted so quickly, does that mean that another member reported
it quickly to admins to get it removed? Someone said it's the new BL algorithm
that did it automatically, but that can't be true because I see other sellers
figs that are missing parts but still listed as new. So am I being singled out
by someone following me and reporting anything I do just to be a jerk?
Thanks in advance.
James
|
|
A companies decisions are based on my factors. Most likely this decision is based
on what benefits the most.
For my store minifig parts sell easier than complete minifigs. Don't worry,
parting out should be fine
Btw, local kindergardens love to get those yellowed parts
|
|
Author: | Andrsv | Posted: | Jul 8, 2020 04:01 | Subject: | Re: Collecting the parts catalog | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, gunga writes:
| Just a random thought that came to me while sorting pieces...
Has anyone tried to collect, and complete, the parts catalog? In other words,
collecting every part in every know color. It would be an interesting challenge
to say the least.
Bill
|
I'm trying, I've spent almost €20.000 so far But only got 13.000 lots
so far. And I have duplicates as I distinguish new and used parts
This store is getting close: https://store.bricklink.com/GermanParts?p=GermanParts&sortBy=1&breakType=M#/terms
|
|
Author: | Andrsv | Posted: | May 25, 2020 13:59 | Subject: | Re: Improved Method for Requesting Insurance? | Viewed: | 27 times | Topic: | Suggestions | |
|
| In Suggestions, kurtcrazy writes:
| Is it possible for Bricklink to improve the method of requesting insurance for
an order?
Currently one has to add a comment to another area, which I am not sure if the
seller sees.
Also when doing instant checkout through Paypal, there is no way to add insurance,
as the order gets paid for before the seller even sees it. (To the best of my
knowledge, as I am not a seller.) I do add the comment anyway, but it seems
kind of pointless once the money has been sent.
Not sure if I am in the minority with my consistent request for insurance. If
so, then it is more understandable why this may not have been addressed previously
and/or may not be addressed soon.
Thank you for your time and consideration.
|
I think this depends on the sellers setting. I have instant checkout in my store.
Insurance is a checkbox at checkout.
|
|
Author: | Andrsv | Posted: | May 25, 2020 12:20 | Subject: | Re: Disable Buyer's Ability to mark order Paid | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, StarBrick writes:
| In Suggestions, Mistress_Lisa writes:
As a buyer, I use the 'paid' option to inform my seller I have paid for
the order.
Usefull for non-instant-checkout sellers!
|
Me too
|
|
Author: | Andrsv | Posted: | Apr 15, 2020 17:52 | Subject: | Re: Thanks for your feedback - avsearch is back | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, Adjour writes:
| I've been using your search tool a lot this week. So I will also like to
say thank you
I list a lot of used stuff, but I would wager that I'm not very efficient
at it, so hopefully others can give you better answers. I probably spend 20 hours
a week or so on my store between everything.
The hard part, I think at least, is once the numbers started to really pick up,
I don't have time to list/sort anymore like I used to. Something to consider
if you are limited on time.
You might find you can only expand/sell so much before you have to quit your
job to continue growing.
|
Thanks for your feedback currently about 7 hours pr week is spent on my shop,
but I keep my store closed half of the time to catch up on orders. I'm considering
to hire someone to work 8 hours pr week, but I'm not sure my shop is profitable
enough. I need to measure time and do some calculations. I think now is a great
time for hiring as many people lost their jobs
|
|
Author: | Andrsv | Posted: | Apr 15, 2020 16:19 | Subject: | Thanks for your feedback - avsearch is back | Viewed: | 241 times | Topic: | Catalog | Status: | Open | |
|
| Thanks for your feedback in private messages guys
Bricklink recently moved all torsos with pattern into a new category, which resulted
in avsearch not finding them.
I've fixed it now by adding an option for plain/decorated torsos. Enjoy:
http://avbricks.no/#/avSearch
avSearch is based on goatleg by 62Bricks with some additional input from mfav.
For your information, the new nougat colors are not yet fixed, but I am aware
of the issue.
I'm considering to take my store from being a hobby into something more,
and would love to get some feedback. I am planning to find out how much it costs(how
many hours) to sort and register used-bulk-lots. Did anyone measure or research
how much time you spend to sort bulk lego, and what is the best strategy? My
current strategy is:
1) sort everything into 10 self-made categories
2) sort each category into specific pieces or narrower categories
3) repeat previous step until everything is sorted by specific pieces
4) sort each specific piece by color
5) Add to my inventory.
I plan to check kg/minute speed for each of my steps.
|
|
Author: | Andrsv | Posted: | Jan 29, 2020 15:13 | Subject: | Re: goatleg | Viewed: | 43 times | Topic: | Catalog | |
|
| Thank you very much for your feedback I've fixed most of it Here's
the current status:
pitz8008:
The way goatleg used to do this is not possible anymore due to security fixes
on bricklink. I have some ideas how to make similar solution, but I need to know
how you want to use it. What is the purpose of searching, what is your next step?
List the part in your inventory?
mfav:
Regarding loading time. There's 2 main reasons for this. Servers are located
in Frankfurt(Germany), Filesize is big because of a library I am using. However,
once loaded everything should run fast. I've looked into it, but didn't
find a quick fix for slow loading time. I know a fix for it but it'll take
some time. It is not currently prioritized. Let me know if it is too annoying
FIXED: Search for Yellow Head, Any Stud Type, keyword: scar. Returns zero results.
FIXED: Search for Black Torso, Blue Arms, no hand color selected. Returns zero
results. (I got 9 results, but it seems to be correct)
FIXED: It appears that for any search all dropdown options must have an active
selection to function.
FIXED: At narrow screen widths the wrap is malformed or something
FIXED: It is returning blue arms, sand blue arms, medium blue arms, etc. Not
just blue arms.
User request not yet implemented:
- Loading time is slow in USA.
- Wish the search functionality was available in same window as bricklink (Need
clarification/user story etc)
http://avbricks.no/#/avSearch
|
|
Author: | Andrsv | Posted: | Jan 29, 2020 14:07 | Subject: | Re: Brickarms inventory | Viewed: | 49 times | Topic: | Catalog | |
|
| In Catalog, mattkaupke writes:
| I had a crazy week last week and didn't get a chance to manually pull my
Brickarms inventory before Lego kicked it off the site. I was hoping it would
be somewhere that I can still see what I had in my inventory. Does anyone know
if this is possible? Otherwise, I have absolutely no way to find them in my shelves
without access to the old listing details. Am I just going to have to stumble
across them over time as I pull other orders and see them? I was hoping they
would go into stockroom with no option to relist or something like that, not
just completely disappear. I should have screenshotted it so I had a record of
my previous inventory and its location, but didn't get a chance to between
when I saw the notice and when they pulled the listings.
|
Did you ever download your inventory? (Download button at the bottom of the page)
|
|
Author: | Andrsv | Posted: | Jan 25, 2020 19:30 | Subject: | Re: goatleg | Viewed: | 51 times | Topic: | Catalog | |
|
| In Catalog, spattersonlego writes:
| Who is willing to start a search site to replace goatleg?
I'm sure people would be willing to pay a small fee to use it. I would.
|
I spent some time rewriting goatleg so that it will be easier to update and maintain.
Functionally should still be the same.
I'd love to get some feedback.
- Please let me know if I introduced any bugs, and I'll fix them
- Any suggestions of important changes you want, please let me know and I'll
consider them.
Here's the new version:
http://avbricks.no/#/avSearch
And the old version
http://avbricks.no/goatleg/
Thanks to 62 bricks for sharing
|
|
Author: | Andrsv | Posted: | Jan 25, 2020 19:10 | Subject: | Re: Black hose is dark gray | Viewed: | 32 times | Topic: | Colors | |
|
| In Colors, yapke writes:
| Hello
I'm guessing that 3 of those hoses are old hoses from old lego technic set(s).
The black hoses weren't that black at that time (1985-1990).
You could compare it with the hoses from the lego technic set 8862 (yellow backhoe),
a set which I'm currently in full process with (cleaning parts and rebuidling
to have pics for showing quality) before selling on BL
Greetings, Yapke
In Colors, Andrsv writes:
|
Thanks
|
|
|
Author: | Andrsv | Posted: | Jan 24, 2020 13:14 | Subject: | Re: Have A Heart | Viewed: | 58 times | Topic: | Catalog | |
|
| In General, BLUSER13161 writes:
| I can't help myself from returning to this topic.
It is not right to erase people who have contributed to the catalog and turn
them into a meaningless number (and a username that rhymes with "loser.").
The first attached image shows people who have contributed a set inventory to
the catalog. For each person it was only one inventory, but it was time they
took out of their day or week to make a contribution.
The second image shows people who have added items to the catalog. One person
added 113 items. Another added 97 items. Yet another added 87 items. And so
on down the list.
Some of these unregistered users are no doubt dead. Some have moved on to new
pursuits. Some may be in a coma or in prison. Who knows why any one person
hasn't logged on or may never log on again?
BrickLink wants contributions. BrickLink wants an involved community. But when
BrickLink treats former contributors so dismissively, by erasing them into meaninglessness,
it makes me think they have no respect for contributors.
BrickLink contributors deserve better treatment than this. Anonymizing people
who have contributed to the catalog was a poor decision. It was a careless and
heartless decision.
I urge the site to reconsider the decision to anonymize any former catalog and
inventory contributors.
|
It is probably related to privacy laws. If someone deletes their account it is
for a reason, and many want their info removed. This is a guess based on related
issues on other places.
|
|
Author: | Andrsv | Posted: | Jan 23, 2020 08:37 | Subject: | Re: goatleg | Viewed: | 73 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
| In Catalog, Andrsv writes:
Respectfully, Yeah, no. That happens, I’m going to have issues with two of you.
Andrsv, you want to take the two hours to write yourself your version based on
the instructions I’ve posted, then fine. Don doesn’t want that old version out
there and neither do I.
Also, be aware you may have maintenance issues with the code, and you’re probably
going to need to update regularly for colors.
|
He linked to my page from goatleg.no. What makes you think he don't want
someone to host it?
Why don't you want it out there? What's wrong?
Btw, I haven't used it myself, I just noticed people wanted it.
I may update it on request. Also I plan to put a tool there which combines duplicates
in your inventory. Currently I'm running a lot of self-made tools locally,
I needed a place to host it
I've bookmarked your instructions on how to create search function. It was
too long to read, so I didn't have time yesterday. Is it better than goatleg?
|
|
Author: | Andrsv | Posted: | Jan 23, 2020 01:22 | Subject: | Re: goatleg | Viewed: | 78 times | Topic: | Catalog | |
|
| In Catalog, randyipp writes:
| In Catalog, spattersonlego writes:
| Who is willing to start a search site to replace goatleg?
I'm sure people would be willing to pay a small fee to use it. I would.
|
I have my own copy of the mini-figure-outer site that I always found to be far
superior. Could not get used to a frame above (goatleg) unless I rotated my
monitor to portrait mode. I'm a tab person.
Nice part is with your own copy you can move things like the colors yellow and
light flesh to the top of the list under head colors. I also ripped out the
color headings and tweaked it to make it as fast as possible (for me anyway).
|
Wanna share?
I'll host it here http://avbricks.no/
|
|
Author: | Andrsv | Posted: | Jan 23, 2020 01:21 | Subject: | Re: goatleg | Viewed: | 64 times | Topic: | Catalog | |
|
| In Catalog, spattersonlego writes:
| Who is willing to start a search site to replace goatleg?
I'm sure people would be willing to pay a small fee to use it. I would.
|
Moved it to here:
http://avbricks.no
|
Author: | Andrsv | Posted: | Jan 22, 2020 18:18 | Subject: | Re: goatleg | Viewed: | 69 times | Topic: | Catalog | |
|
| In Catalog, Lexesmom writes:
| In Catalog, spattersonlego writes:
| Who is willing to start a search site to replace goatleg?
I'm sure people would be willing to pay a small fee to use it. I would.
|
I sure wish someone would create something because identifying torso’s is a pain
in the ass!
|
See my response above
|
|
Author: | Andrsv | Posted: | Jan 22, 2020 17:22 | Subject: | Re: goatleg | Viewed: | 76 times | Topic: | Catalog | |
|
| In Catalog, Adjour writes:
| In Catalog, mfav writes:
| In Catalog, spattersonlego writes:
| Who is willing to start a search site to replace goatleg?
I'm sure people would be willing to pay a small fee to use it. I would.
|
What's it worth to you?
|
I'd pay $5-10 for a months access. Personally.
I don't use it too often, but when I do, I need it a lot all at once. So
I'd rather not have to sign up for a whole year.
|
I've hosted it here temporary:
https://avbricks.s3.eu-central-1.amazonaws.com/web/index.html
I just ordered a proper domain, so it'll move soon.
I think the costs for running this will be less than €20 pr year I'll
serve it for free for you guys, enjoy
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|