BrickLink Discussion Forum

In Help, upscomic writes:

I'm building set 7706 from the instructions pdf from lego.com and the parts
I'm using are different than the inventory on bricklink. One example is a
white 1 x 4 tile. There are other differences but I'm not familiar with bricklink
magic. I hope one of you are.

This set was redesigned during production. The notes are at the very bottom of
the inventory page. They are...

Redesigned during production.

There are at least two different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.

Quick overview of redesign: In the cockpit module various parts are added to
strengthen the build. In the track assembly two black 3708 Technic, Axle 12 are
replaced by four black 6558 Technic, Pin 3L with Friction Ridges Lengthwise,
enabling the tracks on each side to move independently from each other.

------------------------------------------------------------------------------------------------------------------------

There are numerical errors in the parts lists in the instructions for both versions
of this set. The early version of the instructions incorrectly lists only one
pair of minifigure legs, but two are included. It also lists 13 dark bluish gray
32291 Technic, Axle and Pin Connector Perpendicular Double, but only 12 were
included. The later version of the instructions incorrectly lists one black 6558
Technic, Pin 3L with Friction Ridges Lengthwise, but 18 are included.

------------------------------------------------------------------------------------------------------------------------

The dark bluish gray 32523 Technic, Liftarm 1 x 3 Thick in the later version
of the set has also been found in dark gray. The black 6538b Technic, Axle Connector
2L (Ridged with x Hole x Orientation) have also been found in the set as 6538c
Technic, Axle Connector 2L (Smooth with x Hole + Orientation).

Author:

pcthurman

Posted:

Nov 20, 2023 13:40

Subject:

Re: Silver Linings…

Viewed:

32 times

Topic:

In General, popsicle writes:

In General, SylvainLS writes:

In General, popsicle writes:

[…]
Thanks for whittling it down yet further, Sylvain! Just need to figure out why
my images are "now considered wrong"

The .jpg extension actually covers different formats and subformats.
It can be quite complicated to find the guilty ‘option’ to explain the problem.
I don’t think it’s necessary to go further anyway because all the subformats
should be accepted (or, at least, there should be a useful/clear error message)
and knowing it’s the format and not the size or a handling error should be sufficient
for the devs.
But, at worse, they can ask for an example file.

Thank you for helping me understand more fully. I'll stop trying to troubleshoot
that and move on to other issues needing my attention. Thanks again.

Popsicle,
Have you been able to figure out what is wrong with your pictures and why you
were getting the "403 forbidden" error? I am getting the same error message
and would like to fix it so I can upload some pictures.

Cass T

Author:

pcthurman

Posted:

Nov 20, 2023 13:18

Subject:

Re: Bricklink lessons you learned the hard way?

Viewed:

51 times

Topic:

In General, zzed writes:

This week I made a very expensive mistake in Bricklink. I'm so angry with
myself. Nobody did anything "wrong". I just wasn't savvy with knowing
the ropes.

I'd like to spin it positive and see your tips so others can avoid pitfalls.
Or maybe just take a moment to laugh at our silly selves.

So, what Bricklink lessons have you learned.... or possibly had burned into your
brain?

My biggest mistake was to order an item thinking the store I was ordering from
had the part listed correctly. I receive my order and realize the part was the
wrong variant. I contact the store, but they do not have to correct part.

This was

x264 Rubber Band Large (Square Cross Section)
Parts: Rubber Band & Belt {Yellow}

for

7415-1 (Inv) Aero Nomad
111 Parts, 2 Minifigures, 5 Gear, 2003
Sets: Adventurers: Orient Expedition

and I needed 3. I had also placed 2 other
orders at the same time and when those orders arrived, I was horrified to find
that those stores also sent me the wrong part. So now I had 3

x89 Rubber Belt Large (Round Cross Section) - Approx. 3 1/4 x 3 1/4
Parts: Rubber Band & Belt {Yellow}

that
I didn't need and none of the shops I had ordered from had the correct part.

I found another shop that had the x264 listed and contacted them to verify they
had the correct part. They assured me they did and so I ordered. It was the wrong
part again but this time the store actually said they would source it for me
and send it on to me when they got it. That part finally arrived and again it
was the wrong part.

I did finally find a shop that had all 3 but they didn't ship to the USA,
so I contacted them and asked if they could send me a picture of the 3 parts
they had listed. They did, and they were the correct ones, and that shop owner
was willing to ship an order to me!

All told, it cost me somewhere between $40-$50 to finally get the 3 parts I needed.
The moral of the story is, IF you need a specific variant of part, contact the
shop and ask them to verify the part variant and maybe send pictures to prove
it is correct.

Cass T

Author:

pcthurman

Posted:

Nov 20, 2023 00:25

Subject:

Re: Where does this sword come from?

Viewed:

27 times

Topic:

Colors

In Colors, mike1burns writes:

Hard to tell, but it sure looks like that pirate falling off the stern is holding
a pearl dark grey sword. Set 7075

In Colors, WilliamRaine writes:

In Catalog Identification, kittybrickz writes:

are you able to read the item number on it?

Oh I see you updated the number. The only thing I'm seeing are pirate sets
from 2004

Yes, my question is where this specific color (Pearl Dark Gray) came from as
it's not in the catalog at all. Perhaps it was an alternate possible color
in some sets and no one ever made note it?

The 2 swords in set

7075-1 (Inv) Captain Redbeard's Pirate Ship
132 Parts, 4 Minifigures, 1 Gear, 2004
Sets: 4 Juniors: Pirates

are

43887 Minifigure, Weapon Sword, Scimitar
Parts: Minifigure, Weapon {Dark Bluish Gray}

and Light Bluish Gray.

At least those were the colors ours came with.

Cass T

Author:

pcthurman

Posted:

Nov 19, 2023 18:33

Subject:

Re: Storing large amounts of bricks

Viewed:

54 times

Topic:

In Selling, DarthMaul1 writes:

So I have over almost 1k bricks for now and I have boxes that have rows what
is the best way to store them I use ziplocks for some pieces and sets and minifigures
but not sure if that would be good for bricks taken apart.

Most stores use some kind of container storage system like Akro Mills or Sterilite
drawers. Others use bins or shoe boxes. Some use baseball card boxes to store
minifigures.

You should go to YouTube and watch some videos on how people store their LEGO.
It is very informative.

Cass T

Author:

pcthurman

Posted:

Nov 19, 2023 18:28

Subject:

Re: New Seller Help

Viewed:

43 times

Topic:

In Selling, Ealesyyy writes:

Hi, I am new to bricklink and have just started selling on here. I have added
my inventory but not yet had any interest. I understand I probably need to be
patient but wondered if there was anything I could do to help improve sales?

I would really appreciate any suggestions you good folks have and look forward
to hearing from you.

Thanks
Adam

Hi Adam,
Welcome to Bricklink!
The best way to get sales is to increase your lots, IE: store inventory. More
product=more sales.
Most people on Bricklink are looking for parts so selling sets is a waiting game.
Think of it like this...
500 people log into Bricklink. Of those 500 people, only 25 are looking to buy
sets. There are over 19,000 sets listed on Bricklink of which you have 22. Your
store is 1 of 17,799 stores currently open on Bricklink and there are currently
2,873,530 sets New & Used being sold in those stores. The odds of someone looking
for one of the sets you have listed is very small.

To increase your chances, you need to add product to your store.
Other sellers have listed their products at a lower price than the 6-month average
when they are first starting out to help them gain feedback and customers as
well as sales.

I wish you the best in your journey on Bricklink!
Cass T

Author:

pcthurman

Posted:

Nov 19, 2023 12:55

Subject:

Super Battle Droids

Viewed:

102 times

Topic:

Why do shops sell

42687 Legs Mechanical, Super Battle Droid - Solid between Feet
Parts: Minifigure, Legs, Modified {Pearl Dark Gray}

when the clip is broken?

This part is not usable at all with a broken clip. I also believe that the price
of this piece gets inflated due to sellers selling a broken part.

I understand that sellers have the right to sell anything LEGO in their shops
as long as it is clearly stated in the description if something is wrong with
the part.

Seriously though, who is going to buy a useless part? It cannot hold up the
Super Battle Droid or any other droid.

Can someone please explain this to me?

Cass T

Author:

pcthurman

Posted:

Nov 19, 2023 04:20

Subject:

Re: Celebrating birth of our baby! 20% Coupon!

Viewed:

82 times

Topic:

Coupons

In Coupons, Rehnex writes:

Sale at our store celebrating the birth of our baby! Request a 20% Off Coupon!
Help support our family!

This is an extra 20% off the sales we already have at our store!

Congratulations on the arrival of your new baby and future LEGO builder!

Author:

pcthurman

Posted:

Nov 17, 2023 07:15

Subject:

Re: Frustration w/ Yellow Minifigures

Viewed:

69 times

Topic:

In LEGO products, wildchicken13 writes:

In LEGO products, Nubs_Select writes:

If it was space figure themed then maybe

https://www.flickr.com/photos/holgermatthes/51191375913

I did this for my husband for Christmas last year.

Author:

pcthurman

Posted:

Nov 16, 2023 16:44

Subject:

Re: Payment Error

Viewed:

36 times

Topic:

Technical Issues

In Technical Issues, Skullton writes:

Since BrickLink came back up I've been unable to buy anything. Whenever I
try to pay it just pops up with an error and restarts endlessly. I use PayPal
and have been unable to buy anything.

I was wondering if there was an issue or if this was part of the maintenance.

I have placed 5 orders since Bricklink reopened. I use PayPal and have had no
issues. Check you ship to address and make sure it matches with your Bricklink
address.

Cass T

Author:

pcthurman

Posted:

Nov 16, 2023 15:52

Subject:

Re: Searching color of part 767

Viewed:

31 times

Topic:

Searching

In Searching, Steffen76 writes:

Hello Bricklink professionals
If I order bricks in the color dark gray from bricklink, I will receive the stones
as shown in the photo on the right.
When I look for the track sleeper (Part 767), it is sold as dark gray. Unfortunately
the color is not dark gray as shown in the picture on the left. I would call
it brownish gray.
I have some bricks and plates in this color and am looking for matching stones.
So what color should I choose to find brownish gray parts?

If you wish to match the color of the track sleeper

767 Train, Track Sleeper Plate 2 x 8 without Cable Grooves
Parts: Train, Track {Dark Gray}

make sure you
add it to a wanted list as Dark Gray. Also note that a lot of the parts produced
today were not produced in the color Dark Gray.

Good Luck!
Cass T

Author:

pcthurman

Posted:

Nov 16, 2023 15:42

Subject:

Re: Non responding seller - how long until refund

Viewed:

71 times

Topic:

In Problem Order, lozzajp writes:

Hi,

Read the help pages about sellers not responding, and it seems to be I have to
wait 7 days to report that on my order, fair enough.

But the help page seems to imply another 2 weeks before more action? Will I get
my money back or not? It was supposed to be for a present, and now my money is
tied up it seems.

Thanks for any help,
Lozza.

Hi Lozza,
7 days is the waiting period before you can file an NRS or an NSS. Once you have
filed a NRS or NSS, you have to wait 7 days to give your seller a chance to respond.
The seller should reach out to you and hopefully be able to work with you on
solving any problem.

IF at the end of this time the seller has not reached out to you OR the NRS /
NSS has not been resolved, you can go to your payment institute and file a claim
to get a full refund. You should also be able to finalize the NRS / NSS on Bricklink
at this time.

Cass T

Author:

pcthurman

Posted:

Nov 16, 2023 15:30

Subject:

Re: Light kits

Viewed:

42 times

Topic:

In Off Topic, Calle_P writes:

I hope this Lego related post is allowed even if it concerns parts from another
supplier.

I am in the process of building the Lego Creator Expert 10258 London Bus to give
as a gift to someone who drove a bus in London for almost 30 years but is now
retiring.

The bus is almost finished and looks good in itself, but I realize that a lighting
kit would have been the detail that makes the work even more perfect.

Have searched a bit and found different options.
Does anyone have experience with the various kits on the market?
Does the quality differ between different brands?
Are some brands easier to install than others?
Other opinions?

The brands I found that seem serious are:
Lightailing
Game of Bricks
Light My Bricks

I have only bought from Light My Bricks. They are fairly easy to install as they
include instructions on how to do it. They are a little more expensive IMO, but
their product is high quality.

Hope this helps.
Cass T

Author:

pcthurman

Posted:

Nov 15, 2023 00:00

Subject:

Re: I need Dwarfs and a few trolls

Viewed:

48 times

Topic:

Trades

In Trades, legoman77 writes:

In Trades, Biglesdug writes:

I need Dwarfs and a few trolls

I can give you my in-laws address. There are a lot of Dwarfs and trolls there.
John P

Author:

pcthurman

Posted:

Nov 14, 2023 23:48

Subject:

Re: Lego Display Store Questions

Viewed:

31 times

Topic:

In Help, BurnsBrickHouse writes:

Hi everyone,

I am playing around with the idea of renting a space in a heavily trafficked
tourist spot that brings in a lot of families. I want to have a place that people
pay an entrance fee and walk through looking at large scale builds. We would
change up the displays through the seasons and keep it interesting for return
customers.

My question is do you think I would have any trouble with Lego? I wouldn't
use Lego in the store name and we wouldn't sell Lego sets. It's just
a place for families to enjoy when they are enjoying time together.

I already build large displays and so many people of all ages are into Lego that
I think a train display with lots of cool builds would do well. I just don't
want to put in a ton of time and money and have Lego send me a cease and desist.

I don't know who to reach out to and ask.

Thank you.

Doug
Burns Brick House

As long as you do not use any copyrights of LEGO including the name, or selling
ANY LEGO product without permission, they cannot object. After all, you are the
one who bought all the bricks the displays are built of so those bricks are now
your property, and you can use them as you see fit including displaying them
to the public.

I am not a lawyer. These are just my opinions on the matter.

Cass T

Author:

pcthurman

Posted:

Nov 14, 2023 23:36

Subject:

Re: Selling Massive Boxes?

Viewed:

45 times

Topic:

In Shipping, Fr0stByt3 writes:

I've got massive set boxes. I would like to charge shipping for them either
manually or based upon size. My elements I charge shipping based upon weight
and that is undesirable to me for the boxes given their size and comparatively
little weight.

Sorry for my grammar. I can't English at the moment.

When shipping with USPS, they will charge based off weight AND size of the package
as well as how far the package has to travel. Any large box is going to be shipped
in a LARGE package which will increase the shipping costs regardless of the weight.
I do not know how UPS or FedEx work, but those 2 companies are generally more
expensive than USPS.

I personally would only use manual for large boxes so you can do research to
find the lowest price for shipping for each one based on the buyer's location
before sending an invoice. You could do all the research before listing them
to have an idea of how much it would cost to ship to a close state and also the
farthest states. Make a list for each box you are going to sell so if someone
inquires about shipping for that box, you will only need to know what state they
are in, and you can give them a ballpark figure.

Cass T

Author:

pcthurman

Posted:

Nov 14, 2023 23:16

Subject:

Re: I'm on a stop list?

Viewed:

78 times

Topic:

Problem

In Problem, PlanetEarthToys writes:

In Problem, ste0 writes:

Hi!

Can't figure out why I'm on a stop list and what to do about it.

Hope I find some answers.

Regards
Ste

definately no one will stop list you for doxxing another Community member in
the forum.

that never happens, so that should ease your mind a little

hope someone can figure it out for ya

good luck

I do not know what doxxing means but I can tell you that sellers DO in fact stop
list people for post content here in the forum! Just saying.

Cass T

Author:

pcthurman

Posted:

Nov 14, 2023 12:58

Subject:

Re: Boost, Powered up or Mindstorms and scratch??

Viewed:

43 times

Topic:

In LEGO products, FrancineV writes:

My son (9) is interested in getting some power into his MOC's (e.g. open
and close doors, lifting things up, move heads or legs of any creatures he makes).
He uses the program Scratch now and than and we saw you can use Scratch on Lego
as well. But how to, I'm not sure.

I'm just not sure if you need any of the Lego sets (like Boost or Mindstorms)
to use Scratch or if you could just buy an motor set (and which one???) and build
your own things.
It looks like many of the powerd sets ar either cars of robots and he's not
interested in those sets, but he is interested in powering up his Lego.

Also I'm a little confused about which power source to use. There is Boost,
Powered Up, Function, mindstorms. Which one to choose?

Is there someone who can help us with this? I've been looking on the internet,
but I'm still not sure what to choose.

I'm not very good ad technics myself...I just happen to have a son who is

Any help is appreciated. Thank you.

You could check the LEGO shop online to see what they currently have available.
This way your sone is working with the newest technology!

Good luck!
Cass T

Author:

pcthurman

Posted:

Nov 14, 2023 12:43

Subject:

Re: New To Brick Selling

Viewed:

54 times

Topic:

In Selling, randyhoward01 writes:

I thought it would make sense to sell here on this marketplace as I have quite
a few legos from my kids and feel like accuracy from bricklink on prices etc
would help me out the most. I guess I need a positive review but not sure how
to get. Any advice?

Selling Star Wars, Ninjago, Mincraft and Friends typically from 2015 - 2020 era.

Thx

You need to place an order and get feedback from the seller. Once you have the
feedback from the seller, you should be good to go.

Best of luck!
Cass T

Author:

pcthurman

Posted:

Nov 14, 2023 12:24

Subject:

Re: Supplemental sheets for LEGO sets

Viewed:

37 times

Topic:

In Catalog Identification, Stellar writes:

In Catalog Identification, pcthurman writes:

Hi all,
Is there a page on Bricklink that lists the supplemental sheets for instructions?
I have one such sheet, but it does not have any identifying number or date other
than a 7-digit number at the bottom left corner. When I type the number on the
sheet into the search field I get a "No Items Were Found".

I tried to upload 2 pictures of the sheet but every time I do, I get a "403
Forbidden" error. The file is in JPG format and not larger than 2MB.

Anyway, the number on the sheet is 4550634. The picture is of a black X through
a

3028 Plate 6 x 12
Parts: Plate {White}

and then showing an equal sign and then 2

3958 Plate 6 x 6
Parts: Plate {White}

I hope someone can help me figure out what set this sheet goes too.

Cass T

Could you try to upload the image somewhere and give a link here?

Do you have a suggestion as to where I could upload the pictures so I can link
them?

Author:

pcthurman

Posted:

Nov 14, 2023 12:23

Subject:

Re: Supplemental sheets for LEGO sets

Viewed:

27 times

Topic:

In Catalog Identification, Nicolasamico37 writes:

In Help, pcthurman writes:

3028 Plate 6 x 12
Parts: Plate {White}

and then showing an equal sign and then 2

3958 Plate 6 x 6
Parts: Plate {White}

I hope someone can help me figure out what set this sheet goes too.

Cass T

Hi,
I tried to find, but nothing...
The black plate 6x12 appears in 129 sets.
These 2 parts should appears as alternate in the inventory of the concerned set.
I thought it would be in late 2000 sets, like in Ferrari or Lamborghini sets...
There is no hint on the paper ?

Nicolas

Also the plates in the picture are white.

Author:

pcthurman

Posted:

Nov 14, 2023 12:23

Subject:

Re: Supplemental sheets for LEGO sets

Viewed:

32 times

Topic:

In Catalog Identification, Nicolasamico37 writes:

In Help, pcthurman writes:

3028 Plate 6 x 12
Parts: Plate {White}

and then showing an equal sign and then 2

3958 Plate 6 x 6
Parts: Plate {White}

I hope someone can help me figure out what set this sheet goes too.

Cass T

The only identifying number on the sheet is 4550634 in the lower left corner.
Of course, at the top left corner is LEGO.

Author:

pcthurman

Posted:

Nov 13, 2023 19:50

Subject:

Re: Your "Fav. Store" with the Highest feedback?

Viewed:

51 times

Topic:

In General, Brickman4you writes:

Just curious - shout yours out?

I know most large stores make our "Least fav. list", but was happily
surprised of mine...

- Bricks on the Dollar -

I use Bricks on the Dollar and DadsAfol as well. I also like Canada First Bricks.

Cass T

Author:

pcthurman

Posted:

Nov 13, 2023 19:45

Subject:

Supplemental sheets for LEGO sets

Viewed:

100 times

Topic:

3028 Plate 6 x 12
Parts: Plate {White}

and then showing an equal sign and then 2

3958 Plate 6 x 6
Parts: Plate {White}

I hope someone can help me figure out what set this sheet goes too.

Cass T

Author:

pcthurman

Posted:

Jul 14, 2023 17:04

Subject:

Re: Number of polybags in 7140 X-Wing?

Viewed:

24 times

Topic:

In Help, Elkenwood writes:

Does anyone know the number of sealed polybags in set 7140 X Wing fighter?

You can check YouTube for an unboxing video of the set.

Author:

pcthurman

Posted:

Jul 14, 2023 16:39

Subject:

Re: Stickers for 41757 won't peel off.

Viewed:

28 times

Topic:

In LEGO products, ghyde writes:

I just started building this:

41757-1 (Inv) Botanical Garden
1059 Parts, 3 Minifigures, 2023
Sets: Friends

When I started building, I tried to peel off a sticker from the sticker sheet
backing, but both the sticker and the backing just flexed too much, and won't
pop off the sticker sheet. Has anyone else had this problem?

I wanted to see what other people who've encountered this situation would
recommend, before I contact LEGO Customer Service for their advice.

I'm okay with building the set without stickers applied, doesn't bother
me. I've never come across stickers that don't want to pop off at least
an edge from the sticker sheet, though!

Cheers ...

ghyde

I have only encountered this when building some of the older sets from the 80's.

Contact LEGO to get a replacement sticker sheet.

Cass T

Author:

pcthurman

Posted:

Jul 3, 2023 14:08

Subject:

Re: What’s your part white whale?

Viewed:

48 times

Topic:

Searching

In Searching, Mrkrazy133 writes:

What piece do you wish you could buy but it’s either too hard to find or too
expensive? Personally I’m desperately looking for 2 copies of the 60s Robin legs
for a MOC, but I missed my chance years ago and now no one is selling them. I’m
willing to pay a pretty penny for them too, but I can’t find a single store that
has them.

My white whale is...

23766pb003 Minifigure, Head, Modified Cube Tall with Raised Rectangle with Pixelated Dark Green Unibrow, Dark Red Eyes, and Dark Green Nose Pattern (Minecraft Zombie Villager)
Parts: Minifigure, Head, Modified {Green}

Author:

pcthurman

Posted:

Jul 3, 2023 13:51

Subject:

Re: Sometimes I think the USPS is messing with me

Viewed:

42 times

Topic:

In Shipping, peregrinator writes:

This is for a package I dropped off at the post office on June 14. In going from
Cincinnati to Cleveland it actually got farther from the destination.

This happens quite frequently. I had a package from Florida to Virginia arrive
in Maryland, then travel to NC, then on to Tennessee, then back up to Maryland,
before finally arriving at my post office in VA.

As long as the package is moving, it will eventually get to its destination.
When you do not see any updates for 3 days, that is when you should get worried!

Cass T

Author:

pcthurman

Posted:

Jun 29, 2023 13:35

Subject:

Re: Chrome Bricklink issue

Viewed:

37 times

Topic:

Technical Issues

In Technical Issues, aa_aa writes:

In Technical Issues, crazylegoman writes:

I have no idea why that would happen, but I am curious; why do you go to Bricklink's
main page? I never go to it. I just use the https://www.bricklink.com/my.asp
URL as a bookmark.

I realize that not everyone uses the site in the same manner, but I honestly
can't think of why someone would go to BL's main homepage, unless the
person is a new user.

David

I go to the main page simply due to it being the main landing page. I should
have added that no matter what page I am on the issue still occurs. As I stated
this is by no menas a huge issue, was just hoping there was an easy fix

I have never had this problem with MS Edge.

Author:

pcthurman

Posted:

Jun 29, 2023 13:12

Subject:

Re: 1976 Pontiac Ventura instructions search

Viewed:

46 times

Topic:

My Own Creation

In My Own Creation, lencor1208 writes:

Looking for instructions for building a 76 Pontiac Ventura, if not then a fourth
gen Chevy Nova? A third gen Nova is the closest I've found. Even help converting
the third generation Nova to fourth gen would also be greatly appreciated. Thank
you

Try the site Rebrickable.

Author:

pcthurman

Posted:

Jun 29, 2023 13:10

Subject:

Re: Passing on my store to someone else.

Viewed:

51 times

Topic:

In Help, yorbrick writes:

In Help, Admin_Russell writes:

In Help, SurplusParts writes:

Am i able to eventually pass my store onto someone else?

This is not allowed per our Terms of Service. You can allow access to another
individual to handle remaining orders and close the account down, but another
person cannot inherit the account. They would need to make their own account
and transfer the inventory and settings.

What would happen if they were working together with the same account. For example,
a husband and wife team that were both processing orders on an account in the
husband's name. If he then died, would the wife have to close down the account
and start a new one even though she had jointly run the store, possibly for many
years?

This is a great question, and I would love to hear the answer because my account
is used by my husband, my child (25) and myself. We have been considering opening
a store and if something were to happen to me, they would still want to use the
account.

Cass T

Author:

pcthurman

Posted:

Jun 26, 2023 16:28

Subject:

Re: Include Species in Minifigure descriptions!

Viewed:

26 times

Topic:

Catalog Requests

Well I think its safe to say this is all about providing species information
that is known/useful rather than being overly concerned with trying to add species
info that is unknown or hard to source besides which I would go as far as to
say there is no need to add 'Human' to every human character and it may
not be necessary to add the species name where only one known character of that
species exists in Lego form For instance the character Sebulba may not need to
be defined by species unless another character of same species comes along in
which case adding 'Dug' to both entries may be beneficial but I wouldn't
be against it being added though it won't be of much use to anyone for search
purposes unless the character is just as well know by their species as their
actual name

Phew! Take a breath. Please use punctuation.

I almost ran out of breath reading
this.

Cass T

Author:

pcthurman

Posted:

Jun 26, 2023 15:28

Subject:

Re: Genuine Lego w/o Logo?

Viewed:

43 times

Topic:

In Help, Upstate_Brickz writes:

Greeting Bricklink,

I am new to buying used bulk, is there a comprehensive resource of genuine Lego
parts that lack the Lego logo? Just trying to ID some parts. I already searched
past marketplace posts and online, reddit etc.

Currently looking at these with no logo:

Minifigure Breathing Apparatus 30091b

30091b Minifigure Breathing Apparatus, Scuba Regulator and Air Tank with Bar Holder
Parts: Minifigure, Body Wear {Light Bluish Gray}

Did not have a LEGO logo in the earlier release years.

Plant Flower Stem with Bottom Pin 24855

24855 Plant Flower Stem with Bar Holder, Bar, and 3 Stems
Parts: Plant {Green}

Try looking at the bottom of the pin for a copyright circle with
a "C" in it.

Cass T

Author:

pcthurman

Posted:

Jun 26, 2023 14:08

Subject:

Re: Spam & Forum Community Poll results!!!!

Viewed:

41 times

Topic:

In General, PlanetEarthToys writes:

yes , we accomplished conducting a Poll here.

while a few didn't vote at all & turned it into a discussion topic, many
members did participate & voted the option they would want initiated within the
Community in regards to Spam & The Forum.

A few didn't vote? This cracks me up as there are 1,353,547 registered members.
Only 16 voted and only 12 of those voters actually chose a letter.

here is the original Poll as a refresher & the Results.

"Poll:

Which option would you prefer as a Spamming Solution

A? nothing, Raw Spam is Delicious!
B) require a Pay-To-Play Positive Feedback, similar to the Seller Requirement
C) require new users to be Verified by some Official Secondary means w/ Bricklink.
D) ban Zero Feedback Members from posting URL Links in the Forum.
E) allow Zero Feedback Members Limited Forum Access that is a Moderator Only
visiblie / Replies Enabled post"

What about an option F) None of the above. This option would make this vote a
much better example of a vote.

I would recommend running the vote for 1 month to get a better representation
of the "communities" opinion on the matter.

BTW, I did not vote because I do not feel that any of the options are the correct
way to go. Add an option F) and I will.

Cass T

Author:

pcthurman

Posted:

Jun 21, 2023 03:36

Subject:

Re: Selling mini-figures - do people buy parts

Viewed:

36 times

Topic:

In Selling, Wesza writes:

My question is, do people generally buy mini figure parts or is it better to
try hoard and build up full mini figures?

Yes, people do buy minifigure parts quite frequently.

Cass T

Author:

pcthurman

Posted:

Jun 16, 2023 01:42

Subject:

Re: 6720 Instructions

Viewed:

27 times

Topic:

In Catalog Identification, Cob writes:

I have multiple sets of 6720 instructions and they are different sizes.

Right is numbered 4160075
Left is numbered 4160070

Which is considered the official instructions (or both). What is considered
the difference between the two? I have versions of these for the other dinosaur's

6719 6721 6722

I believe the smaller instruction you have does match the catalog. The picture
in the catalog was cropped to take out the white border.

It is most likely the instructions found in the initial release of the set.

Unfortunately, the catalog does not allow more than 1 picture for instructions.
I hope someday that will change as there are quite a few sets that have alternate
instructions.

Cass T

Author:

pcthurman

Posted:

Jun 15, 2023 16:40

Subject:

Re: Ways to label minifigs in displays

Viewed:

40 times

Topic:

In LEGO products, MiniRoz writes:

In Suggestions, pcthurman writes:

In Suggestions, MiniRoz writes:

Hi there. I just got a large minifig display, and I’ve managed to fill it with
182 Star Wars figs. I’d like to label each one with their name and number (and
release date, though that’s pushing it), but I haven’t found an efficient and
aesthetically pleasing way to do this.

Did you ever figure out the labeling of your Minifigures? I would love to see
a picture of the finished case.

Cass T

Author:

pcthurman

Posted:

Jun 15, 2023 13:20

Subject:

Re: Win a Canada Post Truck on Canada Day

Viewed:

39 times

Topic:

Contests

In Contests, TorontoLego writes:

Respond to this post with an interesting fact about Canada for one free entry.

Get another entry for every order placed between now and the end of Canada Day
July 1st!

This is a great condition set that includes the instructions AND box!

105-1 (Inv) Canada Post Truck
57 Parts, 1 Minifigure, 1984
Sets: Town: Classic Town: Post Office

Good luck, eh.

TorontoBricks.com

Archie is considered the first Internet search engine. The original implementation
was written in 1990 by Alan Emtage, then a postgraduate student at McGill University
in Montreal, Canada. It was followed by versions named Jughead and Veronica even
though "Archie" is short for archives and has no relation to the comic
strip.

Author:

pcthurman

Posted:

Jun 15, 2023 12:45

Subject:

Re: Reddit Rivendell Speed Build video

Viewed:

28 times

Topic:

New Sets

In New Sets, SylvainLS writes:

In New Sets, pcthurman writes:

[…]
5 children, 12 grandchildren, 2 great grandchildren, 4 cats

So, I was right, it’s goons

Yes! I call them my goon squad!

Author:

pcthurman

Posted:

Jun 15, 2023 11:27

Subject:

Re: Checking clone/fake box

Viewed:

23 times

Topic:

In General, Stuart9 writes:

Thought I’d check my box of rejects as I thought I’d seen something I now need
but didn’t recognise at the time.

Found it and one other piece.

The item I wanted and found :

88066 Minifigure Spacesuit Rear Quarter Visor with Pegs (Buzz Lightyear)
Parts: Minifigure, Body Wear

Saved me a few £’s.

I once tossed a pair of

43891 Elephant Ear with Bar
Parts: Animal, Body Part {Dark Gray}

into our non-LEGO shrink bucket back when
they were selling for about $7.00 each. Thankfully we had not taken the bucket
to the hospital yet.

Author:

pcthurman

Posted:

Jun 15, 2023 11:03

Subject:

Re: Mark cart

Viewed:

23 times

Topic:

In Suggestions, Ey.Has writes:

Hi.

I have about 50 carts. Is there a way to mark 1-2 specific cart (the next buying...)?

Thanks.

Unfortunately, there is no way to mark a cart for anything other than to buy
or delete.

Author:

pcthurman

Posted:

Jun 15, 2023 07:04

Subject:

Re: Pneumatic hoses?

Viewed:

24 times

Topic:

In Catalog Identification, Oldmanbristow writes:

Hi all,

I have these 3 hoses which I think are 4mm pneumatic hoses.

I have put the sizes they correspond to and wanted to check I am correct.

They are soft flexible rubber.

Thanks again for any help.

Guy

I do believe the 40L and the 28L are pneumatic hoses. The 12L could be a classic
soft hose. It depends on the hole size, I think.

Cass T

Author:

pcthurman

Posted:

Jun 14, 2023 20:44

Subject:

Re: Pneumatic hoses?

Viewed:

30 times

Topic:

In Catalog Identification, Oldmanbristow writes:

I do believe the 40L and the 28L are pneumatic hoses. The 12L could be a classic
soft hose. It depends on the hole size, I think.

Cass T

Author:

pcthurman

Posted:

Jun 13, 2023 16:19

Subject:

Re: Reddit Rivendell Speed Build video

Viewed:

35 times

Topic:

New Sets

In New Sets, SylvainLS writes:

In New Sets, pcthurman writes:

[…]
I started building my Rivendell set on April 16th. I still have all of book 3
to build which by the way is 25 bags to build the middle section. I may finish
it sometime this year!

How do you do that? There’s goons keeping you off of it?

I don’t think I ever managed to not finish a build. Sleep is overrated!

Yes, there is sleep (I get 4-6 hrs. a night), but in truth it is the 3,000+ sq
ft house I have to maintain, 5 children, 12 grandchildren, 2 great grandchildren,
4 cats (they take a LOT of my time, and to top it all off my LEGO business.

I consider myself lucky if I get to spend 2-3 hours a week building one of my
own sets.

Author:

pcthurman

Posted:

Jun 13, 2023 16:03

Subject:

Re: Wow! It seems like just yesterday...

Viewed:

47 times

Topic:

In Suggestions, popsicle writes:

...there were no violet brick members here, and that it seemed like there wouldn’t
be any, anytime soon. Now, there are four Violet Brick Level members, with a
few others locked-in on final approach to the goal: https://www.bricklink.com/memberList.asp?pg=1&v=3

What do you think? Should another, perhaps unique or special color brick level
be set-up, for these rarefied members to attain? https://www.bricklink.com/help.asp?helpID=54

I know it’s far from an important consideration now, but it is a fun one

Maybe someone can arrange some type of choice-of-color polling or vote, to see
what the next level color brick should be?

-popsicle

I vote for Satin Trans-Bright Green

Cass T

Author:

pcthurman

Posted:

Jun 12, 2023 22:25

Subject:

Re: Which Bionicle is this?

Viewed:

39 times

Topic:

In General, Brandish_Jaye writes:

Wrong answers only.

This is the evolved version of

8953-1 (Inv) Makuta Icarax
159 Parts, 2008
Sets: BIONICLE: Warriors

Author:

pcthurman

Posted:

Jun 12, 2023 01:43

Subject:

Re: International Shipping - US to Germany

Viewed:

45 times

Topic:

In Shipping, MiniRoz writes:

Hi there. I have not shipped a purchase internationally before, but I received
a message asking if I would consider shipping a minifigure to Germany. This buyer
has a lot of good feedback, so I'm comfortable doing it as long as it's
not terribly complicated. I looked at FedEx, and the cost and amount of paperwork
seem pretty outrageous, so I'm hoping someone with experience could offer
some advice as far as carriers, pricing, things to avoid, etc.? Thanks so much!

I ship to Germany. I have not had any problems with any of my packages going
through. I am not registered in Germany. I do make sure that all my packaging
is recyclable. I have yet to include an IOSS code / number but I use eBay so
maybe there is a code imbedded into the tracking number on the shipping label.

If your customer is willing to pay the shipping costs and you use recyclable
material, I see no reason why you cannot ship to them. I use first class international
package in a box to ship overseas.

Cass T

Author:

pcthurman

Posted:

Jun 9, 2023 13:20

Subject:

Re: Instructions: 1888-1 Black Knights Guardshack

Viewed:

33 times

Topic:

Searching

In Searching, CallMePop writes:

Hello everybody,

I have been looking for a long time for an instruction for this set :
1888-1 / Black Knights Guardshack

There are a lot of poor quality instructions on the internet but I would have
liked to print a good quality one for my collection because I only need this
manual to have the complete collection of Lego Black Knights!!!

If any of you have this manual, I would be extremely grateful if you could send
me pictures!

Thanks in advance,
Pop

Add the instructions to a wanted list and tick the notify button so that you
are notified when any new listings appear.

Author:

pcthurman

Posted:

Jun 9, 2023 13:03

Subject:

Re: Nubs I think you forgot to take the pizza out

Viewed:

37 times

Topic:

SNIP

I vacationed one time in Albany, and it was very beautiful. I would love to spend
some more time in upstate New York one day. Myself, not such a fan of the cities.
I am much more comfortable hiking through the woods or mountains. But, I have
never been to NYC, either, and I suppose I will have to go there at least once
for reasons (read: wife absolutely wants to go).

Yea ummm, going to New York city is an ordeal for sure. We paid $100 in tolls
to get to Long Island to buy a Lego collection. It was a 16-hour drive made in
1 day. I have never seen so many people and PIGEONS!!!! in my life. (Pigeons)=
the newest New York rat! It was fun to drive by Macy's and see the Empire
State Building up close(ish) as well as the Lady of Liberty. I have vowed never
to do it again.

Upstate New York is amazing though!

Cass T

Author:

pcthurman

Posted:

Jun 9, 2023 12:51

Subject:

Re: Reddit Rivendell Speed Build video

Viewed:

36 times

Topic:

New Sets

In New Sets, macebobo writes:

I can not link it here as reddit has subs selling Lego. But if you go to /r/Lego
and search that sub for Speed Build, you will find it.

It is absolutely stunning.

I started building my Rivendell set on April 16th. I still have all of book 3
to build which by the way is 25 bags to build the middle section. I may finish
it sometime this year!

Author:

pcthurman

Posted:

Jun 9, 2023 01:17

Subject:

Re: Any tips to dismantling old technic?

Viewed:

42 times

Topic:

For some really stubborn ones I resorted to two pairs of pliers, and a soft touch
on gripping the parts. That was a long time ago, though. Smooth grip needle nose
pliers worked really well for small LEGO parts that were too stubborn to budge
otherwise.

This works great with a piece of cloth and does not leave marks.

Author:

pcthurman

Posted:

Jun 8, 2023 18:47

Subject:

Re: How does reporting for underage work?

Viewed:

66 times

Topic:

Horrible grammar, misspelled words, nothing captialized, lots of childish abbreviations.
I deal with teens and middle schoolers on a regular basis and this person "spoke"
exactly the same lingo

Maybe Nubs in disguise?

Author:

pcthurman

Posted:

May 31, 2023 14:52

Subject:

Re: Save seller filtering preferences

Viewed:

26 times

Topic:

In Suggestions, evanperryg writes:

As far as I can tell, there isn't a way to tell BrickLink to save my preferences
on the "Items For Sale" menu. See screenshot for context. As a result,
every time I open a product listing on BrickLink, I have to go through the same
6-step process:

1. Set "Seller Ships To" to USA
2. Check "Instant Checkout Only"
3. Click "More Options"
4. Set "Seller Location" to North America
5. Set "Seller Accepts" to US Dollar
6. Click "Search"

It would be much more convenient if BrickLink would allow me to set my own defaults
for these fields.

Hover over the My BL icon at the top of any page. Select "Settings" which
is on the right of the dropdown menu. Go through each one and set your preferences.
The shopping settings will allow you to choose either USA or North America.

Once you have set your preferences, you should not have to recheck them each
time.

Cass T

Author:

pcthurman

Posted:

May 30, 2023 12:46

Subject:

Re: P/N 30179 with yellow door tr-lt-blue glass

Viewed:

21 times

Topic:

In Catalog, cosmicray writes:

Checking the various combinations of 30179, I’m not seeing the combo entry for
yellow door frame and trans-lt-blue glass. Does this exist and it is not connected
to 30179 in black ?

For reference, I’m parting out several copies of 6434-1 and all of them had the
same frame/door combo. The yellow door appears to be x39c01.

TIA

You could add it to the catalog.

Author:

pcthurman

Posted:

May 24, 2023 03:59

Subject:

Re: updating store shipping methods

Viewed:

44 times

Topic:

In Shipping, kidsncritters writes:

I want to reopen my store and I know there have been changes since I last sold
a few years ago.

I believe I set up the first class shipping correctly. I selected automated
invoicing, courier api and usps first class retail rate chart.

I am not sure how to set up shipping for priority mail. Recommendations?

Welcome back!

You will want to add in your own pricing for shipping. Let me give you an example.

Hypothetical: You live in Virgnia. Shipping to the surrounding states Maryland,
DC., North Carolina, & West Virginia will be the cheapest costs because they
are in the same zone as you. BUT the same package that costs $5.00 to ship to
those states may cost $7.00 to ship to California. So, if it is a $10.00 order,
minus your costs, and you have to shell out $2.00 because the shipping the buyer
paid was not enough to cover the shipping costs, now you've made $8.00 minus
your costs.

1) Set up an account at either PirateShip or Ship Station because these companies
will charge commercial shipping prices which will lower shipping for your customers
as opposed to retail at USPS. Also, first class mail at USPS is only up to 13
oz. BUT at these companies you can ship first class up to 15.15 oz.

2) Do some research at which ever company you choose by putting in weights and
zip codes to different locations in the US to give you a better idea of shipping
costs.

3) IF you ship priority mail, don't use flat rate boxes or flat rate pricing.
Overall flat rate is more expensive than priority mail. You can get free priority
boxes shipped right to your home by ordering them on the USPS website.

I hope this helps.

Cass T

Author:

pcthurman

Posted:

May 24, 2023 03:20

Subject:

Re: Torso cracking

Viewed:

32 times

Topic:

In Help, Hmdrztzgdn writes:

Dear All

Recently, I bought a Sw0308 Saesee Tiin minifigure from set 7931. The minifigure
is in a really good condition with no loose body parts or cracks. I wanted to
change the white arms with dark brown ones however I've heard that dark brown
torso pieces from 2010's are usually fragile and easy to crack and I don't
want to crack the torso. Taking out the white arms won't be a problem but
placing the new arms is risky. What should I do ? Should I still remove and change
the arms or just leave it as it is ? Is there a safe way to change the arms without
breaking the torso ?

There is a video on YouTube that shows the removal of arms with a separator tool.
Since I watched that video, I have not broken the arms or cracked a torso. Putting
the arms back in is a tricky business though.

Good luck!
Cass T

Author:

pcthurman

Posted:

May 23, 2023 18:00

Subject:

Re: Unknown lego

Viewed:

29 times

Topic:

In Help, Tuffduck writes:

Does anyone know what this is? I believe it to be some kind of Bionicle part

It is not Lego. In 19 years of sorting collections I have never seen that piece
before so I cannot say what it is.

Cass T

Author:

pcthurman

Posted:

May 22, 2023 10:57

Subject:

Re: Wanted list add "containing set"

Viewed:

26 times

Topic:

In Suggestions, Ey.Has writes:

When I search for small parts, sometimes, I agree to buy them in "full-set"
(especially: minifigure in "collectible minifigure", or minifigure
parts), so maybe adding a check box or something like this to find also set that
contains the part...

You could try the "Appears in" search field.
1. Hold your cursor over the Market tab on the top middle of your screen.
2. Click the "Appears in" link".
3. Under the "view appearance" button there is a link "Find multiple
items in inv." Click this link.
4. Fill in the form with up to 3 parts.
5. Right above "View appearance" you can select sets, parts, minifigures,
gear, or books.
6. Click the "View appearance" button. It will give you all possibilities
that those 3 parts can be in.

I hope this helps.

Cass T

Author:

pcthurman

Posted:

May 20, 2023 02:25

Subject:

Re: Parting Used Sets - item or step?

Viewed:

52 times

Topic:

In Selling, MiniRoz writes:
As a seller, how do you organize and ship used sets? As a buyer, how do

you prefer to receive them? If you prefer to sell or receive them bagged in order
to follow instructions, what are your thoughts on mixing minifig parts in their
numbered bags?

If I have bought a large order, I ask the order to be packed by color because
the verification is much easier.

However, I do sell complete sets on eBay. If a set is under 500 pieces, then
all the pieces go into 1 large bag, the glass and printed / stickered are bagged
together, and the minifigures are bagged together. The 2 smaller bags go into
the large bag. I then bubble wrap the bag and put it into a shipping box.

For sets that contain over 500 pieces, I bag each color separately again bagging
the glass, printed / stickered, and minifigures separately and place all those
bags into a mother bag, bubble wrap and pack into a shipping box.

In 19 years of doing it this way I have never received negative feedback.

I have bought sets on Bricklink as well and I find that by color is the most
efficient way to verify the contents. A couple times the sets were bagged by
number and much harder to verify as I had to sort the colors out first.

Cass T

Author:

pcthurman

Posted:

May 19, 2023 01:05

Subject:

Re: Selling. Minifigures Lot

Viewed:

43 times

Topic:

In Selling, KingsMan2478 writes:

Question…

How much can I sell a pretty complete Marvel minifigures lot for?

Looking for a gauge of what I can sell it all for. Falling in hard times financially,
need to know my options.

To become a seller here on Bricklink you will first need to make a purchase to
get 1 feedback. Once you have the 1 feedback, then you can apply to open a store.
The application period takes about 3 weeks on average depending on how many other
apps are in front of yours.

Do some research on the individual minifigs and also on the sets you own here
and on other marketplaces. That will give you an idea of how much each set and
/ or minifigure is worth. It will also give you a better understanding of the
different marketplaces available to sell on and how they work and what your best
options are.

Best of luck!
Cass T

Author:

pcthurman

Posted:

May 18, 2023 11:45

Subject:

Re: Order Status

Viewed:

21 times

Topic:

In Help, tradingjoes writes:

I cannot change my order status from “packed” to “shipped” on an order. I keep
getting an error message every time I try to do that. The buyer has paid. I sent
them an invoice on PayPal. I also sent them one on Bricklink (first time doing
that. So I am wondering if that is causing the problem because maybe the buyer
paid the invoice on PayPal and not through Bricklink?

Yes, that is the problem. Taxes need to be collected so an invoice must go through
Bricklink.

Your next steps are...
1. Refund your buyer. Send a message explaining why you are refunding them and
to expect a new invoice. Ask them to please use the "Pay" button on the
top right of the invoice or on the order page to the right of the order.

2. Send your buyer a new invoice. Do not add a link to your PayPal account.

3. Wait for payment to be made.

4. Ship.

I hope all goes well.

Cass T

Author:

pcthurman

Posted:

May 18, 2023 00:19

Subject:

Re: Seller ignoring requests for tracking

Viewed:

35 times

Topic:

In Problem Order, Nubs_Select writes:

Well with Canada post we sometimes are given tracking numbers for packages to
pickup that don't even work so I don't think they have that (at least
I haven't heard of it)

Maybe someone should suggest it to them.

Author:

pcthurman

Posted:

May 17, 2023 23:48

Subject:

Re: Seller ignoring requests for tracking

Viewed:

49 times

Topic:

Could there be a language barrier perhaps? The seller may have "opened"
your message but if it was not in German, perhaps they just closed the message
and did not bother to translate it?

You could always accommodate the seller and send a query to them again in German
and English.

1 other thing, USPS has a feature called "Informed delivery." This feature
adds all tracking info for any package going to your address IF you are registered
for it. I can see all my international packages through this feature even if
the seller does not supply a tracking number.

Does Canada Post have anything like this?

Cass T

Author:

pcthurman

Posted:

May 16, 2023 12:48

Subject:

Re: Explanations?

Viewed:

38 times

Topic:

In General, wildchicken13 writes:

https://store.bricklink.com/RealTP?itemID=290248634

Almost new. Comes with a bonus real woman head.

Store has been suspended.

Author:

pcthurman

Posted:

May 16, 2023 12:20

Subject:

Re: What do i do if i cant afford shipping?

Viewed:

47 times

Topic:

In Shipping, wildchicken13 writes:

In Shipping, I7c writes:

Hello all, so wanted to buy a figure from bricklink and its 12 pounds. however
the shipping says TBD. i only have a small budget so i might not be able to afford
the figure. What do i do if the shipping turns out to be a ridiculous amount,
when i have already paid the seller?

Message the seller and ask them how much shipping is for the item in question.
Worst case scenario you can cancel the order if the shipping cost is too high.

For a 12-pound minifigure shipping is bound to be pretty expensive.

Pound as in British pound.

Author:

pcthurman

Posted:

May 16, 2023 12:15

Subject:

Re: Inventory Change Request for Set 75072-1

Viewed:

17 times

Topic:

Inventories Requests

In Inventories Requests, typingmom writes:

Please make changes to the following inventory:

75072-1 (Inv) ARC-170 Starfighter
91 Parts, 1 Minifigure, 2015
Sets: Star Wars: Microfighters Series 2: Star Wars Episode 3

* Add 2 Part 11476 Light Bluish Gray Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Comments from Submitter:
It appears that this part (2 pieces) is missing from the inventory.

This set has 2 versions. In the item inventory the alternate parts are marked
with an ID 99 on the right which can be found in the alternate section of the
inventory at the very bottom. Each piece marked 99 will have a corresponding
item in the alternate section unless the part was omitted in the second version.

Cass T

Author:

pcthurman

Posted:

May 16, 2023 01:08

Subject:

Re: Wanted List Buy All Error

Viewed:

32 times

Topic:

Wanted

In Wanted, Alicia827 writes:

I’m having this issue right now. I don’t need 1000 little red squares! I can’t
figure out why it is trying to get me to buy everything in bulk.

In Wanted, jro890 writes:

nope, it must be a computer thing, because now it is not happening and seems
like know one else has this issure.

Thanks!
In Wanted, StarBrick writes:

Not here:

- buy all
- autoselect
- quantity of that wanted listed is selected

do you have multiple WL's selected perhaps?

The store probably has a modifier on some of their lots. IE: 100 (x100) so you
have to buy all 100 of that lot or 10 (x2), meaning you have to buy them in 2's.

I hope that makes sense?!?

Author:

pcthurman

Posted:

May 15, 2023 01:38

Subject:

Re: Business, Home, and Auto Insurance

Viewed:

30 times

Topic:

In Off Topic, macebobo writes:

Prices for my all my policies have risen dramatically:

Business: Up 40% (The Hartford, through an independent agent) They will be getting
a call tomorrow.

Home: Up 45% (USAA)

Auto: Up 28% (USAA)

Is anyone else seeing these types of increases?

We have Allstate and did see a minor increase of $25.

Author:

pcthurman

Posted:

May 12, 2023 23:39

Subject:

Re: Grey Poupon ice cream

Viewed:

34 times

Topic:

In Off Topic, Stuart9 writes:

More for you to try.

I feel like I am reading a MAD magazine!

Author:

pcthurman

Posted:

May 10, 2023 10:27

Subject:

Re: Biggest regrest as a seller?

Viewed:

67 times

Topic:

So what was your biggest regret/stuff up/mistake........?????

Not buying more than 1 of

10123-1 (Inv) Cloud City
675 Parts, 7 Minifigures, 2003
Sets: Star Wars: Star Wars Episode 4/5/6

and then opening the 1 I did buy!

Author:

pcthurman

Posted:

May 9, 2023 16:49

Subject:

Re: Searching the mini heads

Viewed:

24 times

Topic:

In General, sailormufasa writes:

This is my first post. I've been stumbling around here for the past month
trying to get my bearings. I didn't see anywhere for new members to introduce
themselves, so... hi.

I was just wondering if there was a way to filter the mini heads in the parts
catalog. I'm trying to build a mini figure of a celebrity that I like. But
the number of heads in the catalog is overwhelming to say the least! Here's
what I'm looking for.

Regular mini head, not mini doll
Classic yellow skin tone
Male
Facial hair, preferably a goatee
Smiling/happy expression

Is there anyway to narrow the list down?

Under catalogue use the advanced search. You can enter the color, select the
category, and then type in a key word like goatee, or beard.

This should give you fewer returns.

Author:

pcthurman

Posted:

May 9, 2023 16:43

Subject:

Re: Inventory Change Request for Set 6009-1

Viewed:

23 times

Topic:

Inventories Requests

In Inventories Requests, megad writes:

Please make changes to the following inventory:

6009-1 (Inv) Black Knight
13 Parts, 1 Minifigure, 1992
Sets: Castle: Black Knights

* Delete 1 Part 3004 Black Brick 1 x 2
* Add 2 Part 3004 Black Brick 1 x 2

Comments from Submitter:
1 for horse sadle
1 for weapon holder

This set only came with 1 black 1x2 brick and 1 black 1x2 plate.

Cass T

Author:

pcthurman

Posted:

May 9, 2023 16:35

Subject:

Re: My city

Viewed:

31 times

Topic:

My Own Creation

In My Own Creation, Darth_Smithy writes:

In My Own Creation, pcthurman writes:

In My Own Creation, Darth_Smithy writes:

In My Own Creation, Quandalere_1 writes:

Hey guys. Quandale Dingle here. I am making a large lego city! Any suggestions
would be appreciated!

Step 1 is to decide if you are going to build on baseplates or MILS plates. There
is no wrong answer,

I probably know what MILS plates are but I am not familiar with the term. Please
explain.

Cass T

best answer: https://www.youtube.com/watch?v=vnxAxvT8bNw&t=4s

the term is modular integrated lanscape system.

Thank you!
That was a great video. I like watching Bricksie.

Author:

pcthurman

Posted:

May 9, 2023 15:45

Subject:

Re: Spring is building 23 tags

Viewed:

30 times

Topic:

In Events, SylvainLS writes:

In Events, pcthurman writes:

[…]
Why would my MOC be tagged as having an IP infringement?
It is original. I do not use any printed or stickered parts. There aren't
any minifigures.

Because you’re citing the set it’s made from. (Which pedantly makes it a MOD,
not a MOC.)
Yes, you’re following the Activity’s rules but this is a Gallery rule: https://www.bricklink.com/help.asp?helpID=2504

I am so baffled right now.

Well, most people are baffled by IP rules.

I am glad I am not the only one.

Thank you SylvainLS.

Author:

pcthurman

Posted:

May 9, 2023 12:55

Subject:

Re: 1001 bricks is almost there...

Viewed:

29 times

Topic:

Feedback

In Feedback, 1001bricks writes:

In Feedback, Autour writes:

Félicitations à 1001 Bricks ! C'est un défi incroyable relevé.
Congrats to 1001 Bricks ! What a major achievement.

I'm happy to be a major, hoping to be general soon!

Merci Kris

Kris - Autour des Briques

In Feedback, macebobo writes:

...50,000 feedback and the Violet brick. Their store will be 1 of only 9 members
to obtain this status.

Looks like it should happen sometime this weekend.

Congratulation Sylvain and crew. Let the countdown begin.

10!

Congratulations Sylvain!

Author:

pcthurman

Posted:

May 9, 2023 12:47

Subject:

Re: Spring is building 23 tags

Viewed:

32 times

Topic:

In Events, SylvainLS writes:

In Events, pcthurman writes:

When I uploaded my MOC into the gallery, the tags I added did not get uploaded.
When I view it, I cannot see the tags. Am I supposed to use a # mark or something?
Is there a way to add it in now as I do not see an edit feature.

Cass T

Indeed, there’s no tags on your design.

AFAICT, you need to unpublish it before being able to re-edit the tags.

Then, you click in the Tags zone, and you hit “return” after each tag.

Why would my MOC be tagged as having an IP infringement?
It is original. I do not use any printed or stickered parts. There aren't
any minifigures.

I am so baffled right now.

Cass T

Author:

pcthurman

Posted:

May 9, 2023 01:07

Subject:

Re: shipstation

Viewed:

28 times

Topic:

In Shipping, galeatter writes:

I have been using PayPal/shipstation for labels and suddenly last night my labels
are half the normal size and turned up and down instead of sideways. I use a
desktop printer. I changed no settings and have checked that printer settings
and shipstation settings are correct. anyone know what is up?

Try restarting your printer. Sometimes that works.

Author:

pcthurman

Posted:

May 9, 2023 00:50

Subject:

Spring is building 23 tags

Viewed:

70 times

Topic:

Author:

pcthurman

Posted:

May 8, 2023 08:10

Subject:

Re: Set listed as "New Sealed" but...

Viewed:

74 times

Topic:

Problem

In Problem, Brickwilbo writes:

In Problem, pcthurman writes:

I came across a seller that has listed a set as New Sealed. They then added the
info, "100% complete, all minifigs included, instructions and box included.
Stickers not applied."

So, is this a used set that is complete? Why add all this extra info if the set
is in fact sealed as everything would be in the sealed box.

Has anyone else come across this before?

Cass T

Maybe the bags are still sealed.

They got back to me this morning. Their reply was "Sorry, that sets has sold."

Maybe they realized an error and will fix it?

Cass T

Author:

pcthurman

Posted:

May 8, 2023 06:57

Subject:

Set listed as "New Sealed" but...

Viewed:

153 times

Topic:

Problem

Author:

pcthurman

Posted:

May 8, 2023 06:39

Subject:

Re: Please move 48245 to Container

Viewed:

28 times

Topic:

Catalog Requests

In Catalog Requests, Give.Me.A.Brick writes:

Please consider moving

48245 Container, Bucket 2 x 2 x 2 with Handle Holes
Parts: Container {Pearl Light Gray}

48246 Container, Bucket 2 x 2 x 2 Handle
Parts: Container {Pearl Light Gray}

48245c01 (Inv) Container, Bucket 2 x 2 x 2 with Handle Holes with (Same Color) Handle (48245 / 48246)
Parts: Container {Pearl Light Gray}

to Container category.

This bucket appeared in many sets outside Belville theme, namely Technic.

Also, its updated version is already on Container category:

18742 Container, Bucket 2 x 2 x 2 without Handle Holes
Parts: Container {Flat Silver}

Thank you!

And Racers like in

8682-1 (Inv) Nitro Intimidator
724 Parts, 2006
Sets: Racers: Power Racers

Author:

pcthurman

Posted:

May 8, 2023 06:16

Subject:

Re: Anyone ever carelessly cut open...

Viewed:

38 times

Topic:

In General, randyipp writes:

In General, chetzler writes:

...a blind bag and found that you had done this?

Am I the only one that pulls them apart from the back side? They split right
down the seam.

If you just want to verify what fig it is, then a 1 inch cut near the top to
look inside and now you can seal it up with tape, never having touched it!

Cass T

Author:

pcthurman

Posted:

May 8, 2023 06:02

Subject:

Inventory Change Request for Set 41232-1

Viewed:

23 times

Topic:

Inventories Requests (Entry)

Status:

Open

Please make changes to the following inventory:

41232-1 (Inv) Super Hero High School
681 Parts, 5 Minifigures, 2017
Sets: DC Super Hero Girls

* Add 1 Part 85941pb025L White Cylinder Half 2 x 4 x 5 with 1 x 2 Cutout with Bright Light Orange Stripes and Medium Azure Window Pattern Model Left Side (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 85941pb025R White Cylinder Half 2 x 4 x 5 with 1 x 2 Cutout with Bright Light Orange Stripes and Medium Azure Window Pattern Model Right Side (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 87926pb023L White Cylinder Half 3 x 6 x 6 with 1 x 2 Cutout with Bright Light Orange Stripes Pattern Model Left Side (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 87926pb023R White Cylinder Half 3 x 6 x 6 with 1 x 2 Cutout with Bright Light Orange Stripes Pattern Model Right Side (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 30562pb079L White Cylinder Quarter 4 x 4 x 6 with Bright Light Orange Stripes Pattern Model Left Side (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 30562pb079R White Cylinder Quarter 4 x 4 x 6 with Bright Light Orange Stripes Pattern Model Right Side (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 87079pb1093 Medium Azure Tile 2 x 4 with Bright Light Orange Lines and Oval Symbols Pattern (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 87079pb1095 Medium Azure Tile 2 x 4 with Bright Light Orange Lines and Symbols Pattern (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 87079pb1094 Medium Azure Tile 2 x 4 with Bright Light Orange Lines, Circles and Oval Symbols Pattern (Sticker) - Set 41232 (Counterpart)
* Add 1 Part 6180pb151 Black Tile, Modified 4 x 6 with Studs on Edges with White 'WANTED!!!' Screen with Picture of Lena Luthor and Kryptomites Pattern (Sticker) - Set 41232 (Counterpart)

Author:

pcthurman

Posted:

May 8, 2023 05:36

Subject:

Re: Multiple addresses for buying/shipping? HELP

Viewed:

37 times

Topic:

In Shipping, NBFire_Rescue89 writes:

Hello all,

I am a US citizen temporarily living in Europe. Is it possible for me to have
sellers ship to my Europe address even though all of my payment/billing info
is tied to my US address? IE I buy from a store in Poland, and have it shipped
to me here in Europe instead of to my address in the US.

Just trying to avoid unnecessary delay in receiving my order from having to potentially
ship a Europe order to my US address, then back to my Europe address from the
US.

Thanks!

The flip side to this is, if you use PayPal, you can change your PayPal address
because most stores that accept PayPal ship to the PayPal address. I would still
confirm with the seller that they will ship to the PayPal address and not the
Bricklink address.

Cass T

Author:

pcthurman

Posted:

May 7, 2023 17:33

Subject:

Re: Spring is building 23

Viewed:

62 times

Topic:

In Events, SylvainLS writes:

In Events, pcthurman writes:

I created a MOC for the Spring is building 23 event. It is my first time using
Studio. I have uploaded the design into "My Studio" on Bricklink but
I cannot figure out how to enter it into the event. I have used the tag springisbuilding23.

What am I missing?

Cass T

I can’t see any MOC when searching fo your ID. Uploading to My Studio isn’t
enough, you need to publish it: https://studiohelp.bricklink.com/hc/en-us/articles/5705436653847-Publishing-in-the-Gallery

Thank you!

Author:

pcthurman

Posted:

May 7, 2023 00:48

Subject:

Re: How to proceed with hostile seller?

Viewed:

49 times

Topic:

In Problem Order, MiniRoz writes:

Hi there. I made two purchases from a seller on April 11th (3.5 weeks ago) totaling
around $174, and I haven't received either yet. They are in Florida and I'm
in Virginia. The status on my orders page hasn't changed from "Paid",
so I contacted them yesterday asking if they'd please provide tracking info.
They haven't replied, so I just looked at their feedback, and this seller
has a concerning pattern of messing up people's orders and, when the buyers
leave neutral or negative feedback, they respond by blaming the buyer and getting
pretty nasty.
Two questions: How should I move forward, knowing that if I complain I'll
receive my first negative feedback? In hindsight, I should have looked at their
feedback first, but is there not a system in place that suspends sellers if a
certain percentage of their transactions result in complaints and/or escalations
through BL or PayPal? I've placed 89 orders, and this is the first time I've
had an issue.
Thanks to anyone with advice. I appreciate you!

The status on your order is "Paid". Did you by chance use instant checkout?
Or did you get an invoice and pay with an off-site payment like Friends and Family?

As a long-time buyer on Bricklink (19+ years) this is how I would handle this
situation.
You have contacted the seller. Wait 3 days for a reply. If you don't receive
a reply in 3 days' time, file an NSS.

Open your order. On the top right side click on the report problem link. It
is easy to fill in the form.

The seller will have 5 or 7 days, I forget which it is, to respond to the NSS.

If they do not respond to the NSS in the time frame given, the NSS will be completed
against them. Then you can file a PayPal claim to get your money back.

Repeat these steps for the second order as well.

Do NOT worry about negative feedback as a buyer, it will not affect your store
feedback.

If the NSS is completed, the seller will not be able to leave feedback for you.

Good luck!
Cass T

Author:

pcthurman

Posted:

May 7, 2023 00:28

Subject:

Re: Anyone ever carelessly cut open...

Viewed:

38 times

Topic:

In General, chetzler writes:

...a blind bag and found that you had done this?

Argh!

The worst part is that it may actually enhance the raggedness of the cape, but
I can't sell it since it is damaged and I can't list an incomplete fig.

I suppose if anyone wants a new orc minifig with a damaged cape, I'd throw
it in for free on your order.

Yes! It happened to me on

colhp2-13 (Inv) Kingsley Shacklebolt, Harry Potter, Series 2 (Complete Set with Stand and Accessories)
3 Parts, 1 Minifigure, 2020
Sets: Collectible Minifigures: Harry Potter: Harry Potter Series 2

about 2 weeks ago.

Author:

pcthurman

Posted:

May 7, 2023 00:25

Subject:

Re: That’s a first

Viewed:

30 times

Topic:

In Off Topic, Nubs_Select writes:

Can’t say I’ve ever had a cracked C-3po head before

Poor C-3PO is suffering from exploding head syndrome.

Author:

pcthurman

Posted:

May 7, 2023 00:23

Subject:

Re: Why shipping is so expensive for small orders

Viewed:

55 times

Topic:

In Shipping, what writes:

Recently I am looking for the star wars minifigs that I missed ( around 40) on
bl, the one seller usually have only a have 1-2 that I want, I usually look for
Europe sellers because shipping from us seller starting from 10 usd while Europe
seller from around 4 euro, but recently I try to place a us order for 3 minifigs
and the shipping was around us$20 (term said start from 3us so I give it a try),
yesterday I asked a quote for 4 minifigs cost are hnd 45 euro, the bl automatic
shipping starting from 9 euro, so I asked a seller for a quote for cheapest untracked
shipping, terms said shipping starts from 1.6 euro, but the quote ended up around
11 euro plus 5 euro for charges, this is out of portion, I notice the shipping
inflated after bl calculate shipping automatically.

Does anyone have the same feeling? And any good suggestions? Thanks

Possibly the seller has other charges and / or fees that are being calculated
into the shipping cost once you get to the last checkout page. Read the terms
for that store. All fees and additional charges should be listed in the terms.

Cass T

Author:

pcthurman

Posted:

May 7, 2023 00:21

Subject:

Spring is building 23

Viewed:

56 times

Topic:

Author:

pcthurman

Posted:

May 5, 2023 04:56

Subject:

Re: Messed up shipping.

Viewed:

51 times

Topic:

In Shipping, Lulumika writes:

Has anyone else experienced anything weird with their shipping options? Last
month, all the shipping options were deactivated. Now, I have customers messaging
me that there are no longer any options for them to buy from their area. I live
in Ontario and my Ontario customers are being told they can't receive shipments
in their area.

I have gone over all the settings and I've even removed a bunch of details...
No more auto payments. All manual. Still having trouble.

M.

You will need to have an Onsite payment option available so that taxes / VAT
can be collected by BL and remitted to the appropriate state / province / country.

Author:

pcthurman

Posted:

May 3, 2023 02:43

Subject:

Re: difference between 3245cpb196 and 3245cpb020

Viewed:

29 times

Topic:

In Catalog, xdennisma writes:

Good point, the colour and outline of the Rod of Asclepius is a noticeable difference
as well.

What is the proper method to formally propose to BrickLink to add the Rod colour
and/or the logo measurement as a descriptive not, so that it is clearer for users?

Thank you,
Dennis

Name change requests have been sent for both pieces.

Author:

pcthurman

Posted:

May 3, 2023 02:24

Subject:

Re: Looking for brick id

Viewed:

29 times

Topic:

In Help, elisebillmy writes:

Dear all

Can somebody tell me what is the part number for this.

Thanks
Bill

This is

30375 Torso Mechanical, Battle Droid
Parts: Minifigure, Body Part {Dark Bluish Gray}

Author:

pcthurman

Posted:

May 3, 2023 02:15

Subject:

Re: My city

Viewed:

52 times

Topic:

My Own Creation

In My Own Creation, Darth_Smithy writes:

In My Own Creation, Quandalere_1 writes:

Hey guys. Quandale Dingle here. I am making a large lego city! Any suggestions
would be appreciated!

Step 1 is to decide if you are going to build on baseplates or MILS plates. There
is no wrong answer,

I probably know what MILS plates are but I am not familiar with the term. Please
explain.

Cass T

Author:

pcthurman

Posted:

May 2, 2023 03:39

Subject:

Re: Unable to change order status from Completed?

Viewed:

29 times

Topic:

Technical Issues

In Technical Issues, gm.lloyd writes:

I recently placed an order and some of the pieces did not arrive. I messaged
the seller to try and resolve the issue but as I was looking at the order, I
noticed the order status was set to complete. I do not remember setting this
and I am unable to change it. With my other orders, there has always been a drop
down to select from but on this one there is no drop down. I am wondering if
I am missing something?

Sorry if this is a dumb question, I am relatively new to bricklink

The seller most likely changed the order to complete.

You could contact the seller, ask them to change the order back to shipped so
you can change it to received. Then you can discuss the missing pieces from your
order.

If you do not get any reply from the seller in 3 days, file as NSS.

I would also put in a ticket at the help desk as suggested in a previous post.

Cass T

Author:

pcthurman

Posted:

May 1, 2023 01:31

Subject:

Re: Hush - Custom Lego DC Comics minifigure

Viewed:

39 times

Topic:

Lego customer services identified it for me so they said it was Custom Lego.

You will not find the head or torso here on Bricklink. Both are a custom printing.

Author:

pcthurman

Posted:

May 1, 2023 01:22

Subject:

Re: Technic, Plate 2 x 16 witch 15 holes

Viewed:

49 times

Topic:

In Catalog, jaca8822 writes:

how i can add this brick to catalog ?

Here is a link that should help you.

https://www.bricklink.com/help.asp?helpID=71

Author:

pcthurman

Posted:

May 1, 2023 01:18

Subject:

Re: API Access: LEGO AI?

Viewed:

45 times

Topic:

Announce

In Announce, araca writes:

Hey fellow brick builders!
I am working on a computer science project for school, and would love to work
with the bricklink API. If anyone could leave some positive feedback, that would
be really appreciated. My friend and I would be working on using machine learning
to analyze lego sets and pieces. Would love to check back in with our progress!
thanks for the help

You do need to be 18 to have an account.

Author:

pcthurman

Posted:

May 1, 2023 01:16

Subject:

Re: difference between 3245cpb196 and 3245cpb020

Viewed:

43 times

Topic:

In Catalog, xdennisma writes:

Hello,
I would like to propose adding a note to distinguish between parts 3245cpb196
and 3245cpb020. I cannot find a way to formally submit this for catalog consideration.

The major difference between the two is that the logo on 3245cpb196 is slightly
larger. The logo on 3245cpb196 measures 11mm from top to bottom, while the logo
on 3245cpb020 is only 9mm from top to bottom.

Thank you,
Dennis

The biggest difference between the 2 stickered parts is the Rod of Asclepius
in the middle.

The Rod is white on part 3245cpb196.

The rod is blue and outlined in white on part 3245cpb020.

Author:

pcthurman

Posted:

May 1, 2023 01:10

Subject:

Re: 57539 hose flexible ribbed colours

Viewed:

29 times

Topic: