Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | yorbrick  | | Posted: | Oct 7, 2019 04:42 | | Subject: | Re: How rare is a flat silver 2x4 brick? | | Viewed: | 70 times | | Topic: | Colors | |
| In Colors, Teup writes:
| | In Colors, mmookk61 writes:
| | In Colors, maxx3001 writes:
| | | | Since you all are discussing one private trade, should you both be discussing
this in pms?
|
Premenstrual syndrome (PMS)?
Btw, we were discussing this 2 hours ago on here and one of us is new to the
site.....
Relax and the symptons will subside.
Maxx
|
I apologize. You are right. Every transaction has a right to be discussed in
the forums and not via private messages, errr, I mean your PMS. We are all in
your circus and are your Monkeys 
|
Note that private trades, as in: trades outside the Bricklink order system, are
not allowed, and are therefore not allowed to be discussed at all - whether in
the forum or in private messages. That would be fee avoidance. That's why
Maxx is asking for it to go via Bricklink order.
On the other hand, this isn't a transaction that involves money, and I'm
not entirely sure what the policy is on that.
|
There is actually a trade section of the forum, so they are allowed to be discussed
in the forum.
https://www.bricklink.com/messageList.asp?ID=75
The policy is straightforward: any trades must go through a (or at least one)
store as normal, as if money is trading hands. Just that instead of money, the
trade is sent in its place.
|
 |
| Author: | yorbrick | | Posted: | Oct 4, 2019 09:57 | | Subject: | Re: Please Rename Items | | Viewed: | 33 times | | Topic: | Catalog | |
| | | Part (973pb0805c01) to "Torso Space Silver Armor Breastplate with Vents and Lime
Dots and Black Octagon with Lime Letter 'B' (Blacktron II Logo) and Silver
and Dark Bluish Gray Belt Pattern / Black Arm and Hand Left / PDG Mech Arm and
Black Claw Right"
|
Is there any point in the abbreviation PDG? I just checked, only three parts
use that, so as a search term isn't it useless? And if people need to know
what the assembly includes, the "item consists of" tells them that.
|
|
| Author: | yorbrick | | Posted: | Sep 30, 2019 09:18 | | Subject: | Re: Limit Shipping Method to One Customer | | Viewed: | 64 times | | Topic: | Suggestions | |
| In Suggestions, axaday writes:
| | In Suggestions, yorbrick writes:
| | In Suggestions, axaday writes:
| | I just opened a shipping method that I keep closed to avoid confusion because
it allows an international customer to instant checkout using domestic shipping
rates. It is for international customers who have a friend or forwarding service
in the US, but I keep it closed to avoid accidental or intentional misuse. It
would be handy if I could limit that to a country or to a specific user.
|
Is it not easier to invoice manually for such situations.
|
Possibly. I used to get a lot of international orders made and then cancelled
because the shipping is over $20 over 8 ounces. Usually customers are willing
to pay the $13ish shipping for 1-8 oz, but rarely did an order over 9 ounces
go through. I so stopped offering wait for invoice for international orders
and capped the instant checkout at 7 ounces. Perhaps that is too strict and
I should think it over.
|
Yeah, I'm sure. I've stopped buying from the USA for that reason.
Maybe put a line in your terms about what it will cost for international orders
for a couple of weight bands and turn on quotes (if you haven't already)
to allow international buyers to ask for postage costs if they need to.
|
|
| Author: | yorbrick | | Posted: | Sep 30, 2019 07:58 | | Subject: | Re: Limit Shipping Method to One Customer | | Viewed: | 37 times | | Topic: | Suggestions | |
| In Suggestions, axaday writes:
| | I just opened a shipping method that I keep closed to avoid confusion because
it allows an international customer to instant checkout using domestic shipping
rates. It is for international customers who have a friend or forwarding service
in the US, but I keep it closed to avoid accidental or intentional misuse. It
would be handy if I could limit that to a country or to a specific user.
|
Is it not easier to invoice manually for such situations.
|
|
| Author: | yorbrick | | Posted: | Sep 20, 2019 12:50 | | Subject: | Gear instructions | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
| I notice that there are now a number of things like this in the catalogue under
GEAR:
[g=ST1]
[g=superman]
What are these meant to be?
Looking at Castle Byers, some people are usnig the listing to sell the set, some
the stickers, some sets with custom stickers, another the set with custom prints,
etc. No-one is actually selling just the instructions!
Is the intention that these should really just be the instructions given that
they come under a category called "Building Event Instructions"?
If so, why are they not listed like normal instructions? Is it because BL does
not recognise these as sets, and properly listed instructions must have sets
to go in?
I remember trying to add the Superman set long ago, and it was denied. But now
it seems the instructions do exist in BL's view, but the sets do not exist.
The strange thing is, when I got my Superman, they were using laser copy / printed
instruction sheets and you could get the PDF if you wanted it, but they did not
have "genuine" instruction sheets.
|
|
| Author: | yorbrick | | Posted: | Sep 18, 2019 04:22 | | Subject: | Re: Request a Quote | | Viewed: | 40 times | | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
| | In Suggestions, kelmgo writes:
| | I am after a few pieces to complete a few kits and am going from one checkout
to another, then to another and then cancelling the orders (before payment) because
the vendors haven't got the "Request a Quote" provision set up.
|
You can always use the Contact Store button and inquire about the shipping costs.
|
That doesn't necessarily work. There are light but high volume parts (like
some windscreens), so if you tell the seller the weight it can be misleading.
Then there are the sellers that have a shipping table based on weight, but refuse
to allow buyers to see the weight of a cart.
I'd like to see a "allows quotes" icon, or better still force all sellers
to allow quotes (better) or order cancellations (worse).
|
|
| Author: | yorbrick | | Posted: | Sep 12, 2019 13:17 | | Subject: | Re: Change NPB Timeline | | Viewed: | 31 times | | Topic: | Suggestions | |
| | | Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
That is probably why they will never do anything about it - it is another push
for non-IC adopters to adopt IC.
|
|
| Author: | yorbrick | | Posted: | Sep 11, 2019 07:55 | | Subject: | Re: Can we have another order status? | | Viewed: | 35 times | | Topic: | Suggestions | |
| In Suggestions, irdroid3 writes:
| | It would be useful to have an Order status to go between "Received" and "Complete"
- something like "Queried" or "Querying" - for when I have started a communication
with the vendor - it's almost complete, but maybe a part missing?
Cheers, Ian
.
|
For something so specific, why not use the order notes and leave it as "received"?
|
|
| Author: | yorbrick | | Posted: | Sep 2, 2019 06:45 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 60 times | | Topic: | Catalog | |
| In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
It looks like there are other exclsuive parts that are going to cause some confusion.
These pics are on eurobricks. Look at the vampire torso, very similar to Lord
Vampyre's but a different colour waistcoat and tie. So a BAM exclusive that
will probably be confused with an existing one.
The spiderwoman - look at the large spider print, it used to be located lower
and was printed across the torso and dress. So that's another two parts very
similar to existing ones from sets but exclusive to BAM.
|
|
|
| Author: | yorbrick | | Posted: | Aug 26, 2019 15:32 | | Subject: | Re: Do part numbers change? | | Viewed: | 32 times | | Topic: | Catalog | |
| In Catalog, Teup writes:
| | I'm working on my own webshop and want it to synchronise well with my Bricklink
store. My software seems to work pretty well, but now I'm wondering, does
it happen that names/numbers of parts change on Bricklink, and if so, how often
does that occur? I want to gauge how necessary it is to do some extra coding
to accommodate for this.
|
I imagine most parts now have the correct numbers but minifigure can change,
like the extra 0 in SW figs.
|
| Author: | yorbrick | | Posted: | Aug 22, 2019 06:45 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 44 times | | Topic: | Inventories | |
| There is another one here if you need it that I happen to have on my desk.
I wasn't sure how to upload a part containing parts and how you are collating
the sets they came in.
From set 79012 contains one standard DARK RED cape
|
|
|
| Author: | yorbrick | | Posted: | Aug 22, 2019 05:01 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 55 times | | Topic: | Inventories | |
| | | | | It is probably a stupid question, but does BL have a test server where such changes
can be tried out without affecting how regular users use the site or allowing
regular users to snoop or interrupt the testing of ideas?
|
It is most definitely *not* a stupid question. If I was king around here, there
would be a place we could test this stuff without affecting the live data and
have sellers/buyers give feedback. Unfortunately, we don't have that. Maybe
we will someday...
|
I said stupid question mainly because if you were needing to work on the live
site (hence affecting any users that have any interaction with the sets / parts
you are changing) then the answer is very likely to be that there isn't such
a test server.
|
|
| Author: | yorbrick | | Posted: | Aug 21, 2019 16:13 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 56 times | | Topic: | Inventories | |
| | | A user found out while the idea was being tested in the first two days. An announcement
was planned for today or tomorrow once the initial work was done. So, a total
of maybe four days from initial work to completion of testing work to communicating
with the user base for feedback. A pretty short timetable that was interrupted
by a user that was "snooping" around. 
|
| | For this, it would have all been explained in our announcement message that did
not get a chance to materialize due to someone interrupting the process.
|
| | Yeah, we heard that. That is why things have already been rolled back due to
the feedback. I took almost three hours of my personal time last night doing
this by myself ASAP. See, us volunteer admins can get stuff done quickly, unlike
the corporate employees. We also take the feedback we get seriously and try to
work with everyone as best we can as we try to add new things to the catalog.
|
| | The volunteer admins have no choice but to move forward with ideas that are needed
for the catalog. We have the time and energy to try and make positive changes
for the user base. The corporate side does not. Eventually, the corporate side
will catch up (from things I have started to hear), but us volunteers have no
say and no way to do what is necessary to the code. We work in the systems we
have.
|
It is probably a stupid question, but does BL have a test server where such changes
can be tried out without affecting how regular users use the site or allowing
regular users to snoop or interrupt the testing of ideas?
It seems crazy that any ideas that get tried out (that do affect regular users)
need to be made on the client facing server.
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 15:06 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 46 times | | Topic: | Inventories | |
| In Inventories, randyf writes:
| | In Inventories, yorbrick writes:
| | In Inventories, randyf writes:
| | In Inventories, yorbrick writes:
| | But what happens when more sets come along that use this sleeve? They need to
be added to the part description. Why not just call it "Cardboard Sleeve 4580966"
removing the set names?
|
Thank you for this suggestion. We were trying to come up with a way to not have
to repeat information in the names, but I think this idea is the easiest solution.
We will have to come up with another way to track what sets these come in in
the meantime. I am guessing the additional notes for the sleeves will probably
be the way to go.
Cheers,
Randy
|
If the actual parts in the sleeve are listed in the inventory and the (sealed)
sleeves are listed as an alternate for each of the sets they are in, won't
that information already be stored in the catalogue in a meaningful way? Then
someone can look up the number on the sleeve and search for it. It won't
be in any sets as a regular part but will be listed as an alternate for all the
sets it appears in. That way, the set numbers need not be kept in the title or
as additional notes.
Or have I totally misunderstood how alternates work?
|
Yes, you have misunderstood alternates. Alternate parts are parts that are completely
substituted for other parts in a set. These sleeves come in every set they came
in.
As Russell said, we will need to wait for new functionality before we can ever
add these to inventories in a meaningful way that makes it easy for sellers to
part them.
Cheers,
Randy
|
Sorry I got confused. I meant actually counterpart and not alternate.
So as an example could you have
as a counterpart to having four of these
[x1687]
???
Of course, this doesn't meet the current definition of what a counterpart
is either - although in a way it does, if you open the sleeve then you have permanently
changed it. But this would mean listing the filled sleeve as the regular unperturbed
item and the four rods as counterparts (and what to do with the empty sleeve,
throw it away like an unused sprue?).
Again I may well have it wrong, as I tend to focus on which parts LEGO gives
us rather than how LEGO packages them in the box.
I can see it is a mess, trying to fit something new(ish) around existing rules
that were not put in place to do what is needed.
If you look up those axles you get told they are in 24 sets (and also 3 parts).
If I wanted to know which sets that axle came from I would naturally look at
the 24 sets but probably not look at the parts they come from. I wouldn't
find that they come in set 60051 when in reality they do.
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 14:12 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 38 times | | Topic: | Inventories | |
| In Inventories, randyf writes:
| | In Inventories, yorbrick writes:
| | But what happens when more sets come along that use this sleeve? They need to
be added to the part description. Why not just call it "Cardboard Sleeve 4580966"
removing the set names?
|
Thank you for this suggestion. We were trying to come up with a way to not have
to repeat information in the names, but I think this idea is the easiest solution.
We will have to come up with another way to track what sets these come in in
the meantime. I am guessing the additional notes for the sleeves will probably
be the way to go.
Cheers,
Randy
|
If the actual parts in the sleeve are listed in the inventory and the (sealed)
sleeves are listed as an alternate for each of the sets they are in, won't
that information already be stored in the catalogue in a meaningful way? Then
someone can look up the number on the sleeve and search for it. It won't
be in any sets as a regular part but will be listed as an alternate for all the
sets it appears in. That way, the set numbers need not be kept in the title or
as additional notes.
Or have I totally misunderstood how alternates work?
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 13:15 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 36 times | | Topic: | Inventories | |
| | | Because our partout system is not yet capable of handling subparts, we're
probably not going to be able to add these sleeves to the regular section of
inventories. Maybe if we change the image and description we can do it, but right
now sellers will end up listing things in their store that buyers cannot identify.
|
Too late, you are already doing it!
| | Please have patience as we make some adjustments.
|
Why not get the partout system for sellers and buyers to handle it correctly,
then make the changes. As it is, anyone parting out a set with these sleeves
in needs to manually delete each sleeve from the part out, then go back and part
out any sleeves or similar.
Although from the comment above, I assume you don't know that these are already
being added as sleeves rather than as the component parts. If the sleeves are
added but not as regular parts, and the parts are still in the regular section,
then it is fine and easy to ignore. But that isn't the case.
Also parting out as a part doesn't work quite right. You have to select a
colour for the part to be able to part it out, even if you have already selected
Not Applicable as the colour on the part's page before parting out. So this
adds yet another click to the parting out a sleeve process.
Although shouldn't the colour of most of these sleeves be white rather than
not applicable? After all, they are white!
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 08:16 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 45 times | | Topic: | Inventories | |
| | | Wow! Just seeing that cardboard cape boxes have been added to the catalog.
I usually would prefer to refrain from making a derogatory comment on something
so trivial, but I have to say, that is a new kind of stupid. Give me a break.
|
It is truly bizarre. There is this sleeve, for example:
which contains two minifigure capes. However, this sleeve which is called "Cardboard
Sleeve for Set 70837" doesn't actually appear in set 70837 since it contains
minifigure parts, which are listed with the minifigures. So we now have an entry
for a part that is not included in any sets and so is unlikely to ever be listed
in that way.
Then we have the same where the sleeves contain a single cape, for example:
Again it doesn't belong to any sets despite the name, since it belongs to
a minifigure.
It seems to be a case of making a rule then insisting on sticking to it for all
parts and sets, no matter how stupid the application of the rule is.
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 07:51 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 40 times | | Topic: | Inventories | |
| | | Is there any demand to purchase open, empty cardboard sleeves?
|
I don't think you can buy the empty sleeve because as soon as you open it,
you have the parts inside but the sleeve itself is not in the inventory of the
sleeve. Just as a sprue contains parts on it but not the sprue itself, a sleeve
does not contain the sleeve once opened. There is no listing for the sleeve only,
only a full (unopened) sleeve.
However, I guess some sellers will open the sleeves to check the parts inside
and sell them as new with "opened" in the comments. Although I imagine the parts
will sell better than the parts in the sleeve*. It would also be possible to
list the sleeve with comments saying "no parts inside, just the sleeve" if someone
really wanted to sell just the sleeve.
* This is where there might be a problem for wants lists. I imagine most people
putting a set together want the parts, not the parts in the sleeves. However,
parting the set out to a wants list (or parting out when selling) defaults to
the user wanting the parts in a sleeve and so they may well miss sellers that
have the parts that they want as they don't have them in the sleeve. It is
the problem of having multiple entries for the same part (or parts) just differing
in whether they are in some sort of useless packaging.
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 05:59 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 45 times | | Topic: | Inventories | |
| This will also screw about with the price guide and wants lists, with decisions
about how to sell the part in the sleeve.
Do you sell a single part in a cardboard sleeve or do you sell it as the part?
These are two different entries with two different price guides.
It is like sets that contain a single part or minifigure - just introducing more
difficulty for users to sell / find what they want.
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 05:39 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 41 times | | Topic: | Inventories | |
| Also it seems parting out sets is now broken. Will there be an option added (like
break sets in set) to break parts in sleeves / multipacks? Selecting break sets
in set does not open up the multipacks or sleeves.
Try parting out a set, and the only option seems to be to list the sleeve, not
is what is actually in the sleeve. To list the parts you now need to do that
manually.
This is a really bad decision, Bricklink! BL should make things easier for sellers
to sell parts, not make it increasingly difficult.
|
|
| Author: | yorbrick | | Posted: | Aug 20, 2019 05:34 | | Subject: | Re: Cardboard sleeves in inventories | | Viewed: | 59 times | | Topic: | Inventories | |
| In Inventories, Turez writes:
There is also an issue with the naming. For example:
is currently called "Cardboard Sleeve for Sets 60051, 60052". It has exactly
the same name as
But what happens when more sets come along that use this sleeve? They need to
be added to the part description. Why not just call it "Cardboard Sleeve 4580966"
removing the set names?
already has five set numbers in the name, what will the limit be? If it appears
in 100 sets, will they all be named in the description?
And isn't a natural extension of this to catalogue, for example, bag 1 from
set XXXX, bag 2 from set XXXX, and so on (where these bags do not contain any
minifigure parts)? After all, that is how LEGO supplies them in a set. They are
not individual parts in a box, they are multiple parts in a defined bag in a
box. How big does a bag have to be before it is no longer a multipack? So when
a set contains a small bag of 1x1 parts in a larger bag, is that now considered
a multipack or is it the parts in a bag?
And what about instructions when they are supplied with a sticker sheet inside
a polythene bag and a piece of card? Is that a cardboard sleeve / multipack or
just the instructions and a sticker sheet?
|
|
| Author: | yorbrick | | Posted: | Aug 11, 2019 17:15 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 24 times | | Topic: | Catalog | |
| | |
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
Also it would not surprise me if some torsos are sold without glove, and so it
would be good to have the gloveless entry, as otherwise some sellers might have
to sell them as missing a glove when in reality it isn't.
|
|
| Author: | yorbrick | | Posted: | Aug 11, 2019 17:12 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 38 times | | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
Is it possible that in German or USA LEGO Brand stores it is sell with glove?
|
I assume the boxes they come in are the same. All the ones I have seen in the
UK have been without glove. Of course, staff or other customers could add the
gloves then leave the assembly.
|
|
| Author: | yorbrick | | Posted: | Aug 11, 2019 17:03 | | Subject: | Re: Elements Exclusive to BaM | | Viewed: | 39 times | | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| | In Catalog, constructibles writes:
| | Just to add to the never-ending "identify this part" questions, it's now
been semi-officially confirmed that LEGO has created exclusive elements for the
BaM (Build a Minifgure) bins in LBR stores. I'm sure this will give more
people headaches for authenticating parts, since they will not appear in any
inventories. Looks interesting though, and I hope they keep introducing new
elements.
|
From month ago
https://www.promobricks.de/lego-store-neuheiten-minifigur-station/83292
Some of them are alrady in the catalog
|
That one isn't in the BAM. The BAM versions I have seen all come in a gloveless
form and the buyer adds the glove to it.
|
|
| Author: | yorbrick | | Posted: | Aug 4, 2019 17:49 | | Subject: | 973pb3600c01 | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
|
Has anyone actually seen this part in a BAM box with the mitt attached? I have
seen multiple of them in three different stores now, and they do not have the
mitt. They have a single hand and a missing hand. You can add either a mitt or
a hand, staff don't care.
So should this be listed with a mitt, given that this is not how it is supplied?
Or at least have a note about this, as not all the torsos will have mitts.
|
|
| Author: | yorbrick | | Posted: | Jul 30, 2019 10:22 | | Subject: | Re: Appoint a new administrator | | Viewed: | 79 times | | Topic: | Suggestions | |
| In General, tpr writes:
| | Hi
I know a lot of work goes on behind the scenes with volunteer administrators
who do a damn good job with the catalogue and inventories.
Is it about time Bricklink appointed an (or more) administrator (s) to oversee
the selling side of Bricklink.
Bricklink would not exists without its revenue from sellers putting in time and
effort to sell and pay fees to Bricklink.
Surely it is only fair to sellers and buyers that items for sale conform to the
rules. If items are being mis-represented they should be removed or sellers given
the opportunity to amend their listing.
It would be nice if Bricklink appointed people to oversee the selling side of
the business. Sellers may then start conforming with their listings
tpr
|
I think also there should be sanctions where this appears to be deliberate. If
you make a mistake (such as listing new when it has been used) and it is reported
and BL agrees, then it's fine and you should learn from it. If you make that
same mistake again (say within six months or a year), then you get a week's
ban from selling. If you do it again after that, it's a month ban.
Maybe with different limits for bigger stores / higher turnover stores.
|
|
|
| Author: | yorbrick | | Posted: | Jul 15, 2019 07:15 | | Subject: | Re: collectable minifigures leaflets | | Viewed: | 23 times | | Topic: | Catalog | |
| | | That is not true for series 1 up to 15 where all leaflets had a unique numbering,
also most series at least up to series 13 (if not all) had a unique code on them
to unlock the characters on the website https://www.playminifigures.com/ (is
no longer active, was closed at the end of 2016).
|
What do you mean by unique numbering?
Do you mean the 122091-1, 2, 3 codes?
I've just looked at 27 Series 8 leaflets, all have 122091-1 or 122091-2,
and I have not seen any other numbers after the dash. The exact same number is
on other series leaflets too. For Series 10 I have a 122091-3. I don't think
these numbers were unique to individual sets within a series.
|
|
| Author: | yorbrick | | Posted: | Jul 9, 2019 09:26 | | Subject: | Re: Benny's torso 973pb1652c02 | | Viewed: | 36 times | | Topic: | Catalog | |
| | | You just said it has two arms, but it doesn't unless you are counting the
unattached robot arm and claw.
|
I make that two arms.
| | The catalog picture for a minifigure shows the
minifigure assembled. Most catalog pictures for sets show the set assembled.
But your customers are not expecting you to take what Lego supplied and assemble
it for them like the picture.
|
I agree. Most customers buying new parts expect me to take the new parts as supplied
by LEGO and send those. They do not expect me to assemble them. But I cannot
sell the parts that LEGO supplied here, I have to sell either a combination of
them or pull them apart. There is no option to sell it as it was originally supplied.
It is the inconsistency that is a problem. Going back to the sprues, LEGO did
not intend them to be used according to the pictures of the sets. But BL catalogues
these parts as coming on a sprue. They are listed as coming that way in the set,
whether or not all the parts are needed. There is an option to sell the parts
connected to a sprue (or in a bag) as supplied or sell the parts individually.
Whereas here, they are not listed as they come in the set. There is no option
to sell the parts as supplied.
|
|
| Author: | yorbrick | | Posted: | Jul 9, 2019 09:03 | | Subject: | Re: What sets could I build from my inventory | | Viewed: | 44 times | | Topic: | Inventories | |
| In Inventories, szellandor writes:
| | Hey guys,
Is there a listing option here to check which complete sets could I be able to
build using the parts in my inventory? If the answer is yes, can I exclude the
parts from my inventory that belong to a complete set I wouldn't want to
take apart for the purpose? I have a crazy amount of spare parts, I'd like
to check wether they could add up to some nice, complete sets
|
https://rebrickable.com/
|
|
| Author: | yorbrick | | Posted: | Jul 9, 2019 08:44 | | Subject: | Re: Benny's torso 973pb1652c02 | | Viewed: | 28 times | | Topic: | Catalog | |
| In Catalog, axaday writes:
| | In Catalog, yorbrick writes:
| | Because at Bricklink you cannot sell the torso assembly as it is supplied by
LEGO. There is not a catalogue entry for the torso, arm and hand and robot arm
without the claw, as supplied by LEGO. To match the catalogue entry, you need
to add the robot arm.
|
Do you really want to sell a torso with 1 arm? Is there is a market for that?
|
It is what lego supplied. It has two arms, just no robot arm / claw extension.
I don't know if there is a market for it, as it cannot be sold that way.
And there are plenty of listings for torsos without arms, whether there is a
market for them or not. They all get catalogued even though this is not how lego
supply them. Yet these pieces don't get listed as they are supplied - but
do get catalogued if you either add another part or remove some parts.
|
|
| Author: | yorbrick | | Posted: | Jul 9, 2019 06:56 | | Subject: | Re: Benny's torso 973pb1652c02 | | Viewed: | 44 times | | Topic: | Catalog | |
| In Catalog, axaday writes:
| | In Catalog, yorbrick writes:
| | | | Precedence.
All of the other torsos that use
are handled the same way.
|
OK, so it's historical. Will this ever be changed to reflect what is actually
received in a set rather than what is needed for a set, like the debate about
the sprued parts now being the whole sprue rather than the required parts only?
If parting these out it is necessary to assemble them, and I don't want to
assemble them if they later become the individual parts.
|
Please don't assemble ANY of the minifig parts if you are selling it to me.
Why would this imply that anyone wanted you to do that?
|
Because at Bricklink you cannot sell the torso assembly as it is supplied by
LEGO. There is not a catalogue entry for the torso, arm and hand and robot arm
without the claw, as supplied by LEGO. To match the catalogue entry, you need
to add the robot arm.
It implies you have to either add the arm to the torso, or bag them separately
to keep them together, or store them unattached but need to remember to add the
robot arm, and hope the buyer finds the robot arm before complaining that it
is missing the arm.
|
|
| Author: | yorbrick | | Posted: | Jul 9, 2019 05:28 | | Subject: | Re: Benny's torso 973pb1652c02 | | Viewed: | 39 times | | Topic: | Catalog | |
| | | Precedence.
All of the other torsos that use
are handled the same way.
|
OK, so it's historical. Will this ever be changed to reflect what is actually
received in a set rather than what is needed for a set, like the debate about
the sprued parts now being the whole sprue rather than the required parts only?
If parting these out it is necessary to assemble them, and I don't want to
assemble them if they later become the individual parts.
|
|
| Author: | yorbrick | | Posted: | Jul 9, 2019 04:48 | | Subject: | Benny's torso 973pb1652c02 | | Viewed: | 82 times | | Topic: | Catalog | | Status: | Open | |
| This part is listed as
I have opened seven of the CMF versions and they do not come like this in the
set. The torso comes without the robot arm attached. Is there are reason having
only the assembly in the inventory, and not having it how it actually comes in
the CMF set?
|
| Author: | yorbrick | | Posted: | Jul 4, 2019 07:04 | | Subject: | Brand filters (again!) | | Viewed: | 153 times | | Topic: | Catalog | | Status: | Open | |
| The AFOL sets are not real LEGO sets, right?
Have they been catalogued incorrectly or are the filters not working correctly?
|
|
| Author: | yorbrick | | Posted: | Jun 30, 2019 08:43 | | Subject: | Re: Connecting to Royal Mail | | Viewed: | 54 times | | Topic: | Suggestions | |
| In Suggestions, NorthJ90 writes:
| | It would be so much easier if BrickLink could connect to Royal Mail and download
orders like you can on eBay. I’d be happy to pay a little more on fees to accommodate
it.
|
I wouldn't pay higher fees for this, so voted no.
Also, there are not that many active UK stores. For BL to implement this for
such a small number of sellers is unlikely.
|
| Author: | yorbrick | | Posted: | Jun 27, 2019 14:38 | | Subject: | Re: Toy Story Duplo 10894 parts not in inventory | | Viewed: | 22 times | | Topic: | Inventories | |
| In Inventories, BEEKUZZ writes:
| | We need the Toy Story Train 10894 inventoried so we can part out. How is this
done? Can I do it myself?
|
Yes so long as it is not already reserved. Use the links here:
https://www.bricklink.com/help.asp?topicID=38
|
|
| Author: | yorbrick | | Posted: | Jun 21, 2019 04:58 | | Subject: | Re: col08-14 ACTOR | | Viewed: | 46 times | | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| | In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| |
Is there a reason this keeps getting changed?
|
I have no idea. last name change was done by Robert
(Nov 7, 2018 by StormChaser) and this change isn't in the log
So ask him ...if you have contact with him.
I really have no knowledge about it.
| |
This set was originally listed as Actor, it was then changed to Thespian. I asked
for the Actor name to be reinstated, which it was, and then it was removed again.
|
for other to see it history
https://www.bricklink.com/catalogReqList.asp?itemID=111573
| |
The minifigure version has both names:
Why can the set not keep both names?
|
Have no idea.
|
I'd suggest it again, but seeing as I have done it once and it got done and
then changed back again later I don't see the point of going round in circles.
It should really drop the "The" as well - we don't have The Butcher, The
Plumber, etc.
|
So I've change it to be the same as minifig entry, but you know in the future
a new admin can change it back again 
|
Thanks, hopefully the dual name will stay. I know people use both.
Thanks also for correcting the spelling of ANTON'S tile.
|
|
| Author: | yorbrick | | Posted: | Jun 20, 2019 15:25 | | Subject: | Re: col08-14 ACTOR | | Viewed: | 38 times | | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| | In Catalog, yorbrick writes:
| |
Is there a reason this keeps getting changed?
|
I have no idea. last name change was done by Robert
(Nov 7, 2018 by StormChaser) and this change isn't in the log
So ask him ...if you have contact with him.
I really have no knowledge about it.
| |
This set was originally listed as Actor, it was then changed to Thespian. I asked
for the Actor name to be reinstated, which it was, and then it was removed again.
|
for other to see it history
https://www.bricklink.com/catalogReqList.asp?itemID=111573
| |
The minifigure version has both names:
Why can the set not keep both names?
|
Have no idea.
|
I'd suggest it again, but seeing as I have done it once and it got done and
then changed back again later I don't see the point of going round in circles.
It should really drop the "The" as well - we don't have The Butcher, The
Plumber, etc.
|
|
| Author: | yorbrick | | Posted: | Jun 20, 2019 14:52 | | Subject: | col08-14 ACTOR | | Viewed: | 89 times | | Topic: | Catalog | | Status: | Open | |
|
Is there a reason this keeps getting changed?
This set was originally listed as Actor, it was then changed to Thespian. I asked
for the Actor name to be reinstated, which it was, and then it was removed again.
The minifigure version has both names:
Why can the set not keep both names?
And on their webpages, LEGO refer to it as ACTOR. If it can have only one name,
then surely it should be the LEGO one.
https://www.lego.com/en-gb/themes/minifigures/products/lego-minifigures-8833
|
|
|
| Author: | yorbrick | | Posted: | Jun 18, 2019 04:19 | | Subject: | Re: New part that doesn't exist without printing | | Viewed: | 45 times | | Topic: | Catalog | |
| In Catalog, crazylegoman writes:
| | There's a new part I want to add to the catalog, and so far it only exists
with a printing on it. Is the proper procedure to add a sort of "placeholder"
entry for the actual new mold/part that has no printing, and then add the new
printed part that I have? I will upload a photo of the printed version I have,
but of course, cannot for the base part.
Thanks,
David
|
I believe you can only submit the printed part, as that is what exists.
|
|
| Author: | yorbrick | | Posted: | Jun 12, 2019 04:06 | | Subject: | Re: Have all members pay BL $1 to buy and/or sell | | Viewed: | 66 times | | Topic: | Suggestions | |
| | | "Let's trap all buyers inside of this mall so they don't go out without buying our products"
|
That's a good idea. How about membership fees of $1000 per year. But that
allows you to get $1000 of credit towards any BL orders you place in that year.
For large buyers it will make no difference. For small buyers, it will encourage
them to spend more.*
* Or not join at all.
|
|
| Author: | yorbrick | | Posted: | Jun 1, 2019 12:33 | | Subject: | Re: Option to Donate to reach min. buy | | Viewed: | 39 times | | Topic: | Suggestions | |
| In Suggestions, Brickochet writes:
| | In Suggestions, nectara writes:
| | In Suggestions, Brickochet writes:
| | This is a fairly bad marketing idea for shops that probably don't work out
in the shops favour. I know a majority of my browsing has ended up in me taking
my business and money to another shop. Where I am either buying from someone
without a min buy, or selecting other items I actually want to hit that minimum
purchase amount. So my suggestion is to add a donation field/possibility to finish
passing the required purchase line.
I have only made 3 purchases since I joined but these 3 people are profiting
by shop deterrence over the min buy. One of which was a difference of 3 cents
to the min buy vs. paying 1 cent more for the same thing because it didn't
have one.
|
If a few cents deter you to buy then maybe Lego hobby it's too expensive
for you.
Regards
Nectara
|
spending a few extra cents doesn't deter me; being a few extra cents away
from min purchase amount and not being able to find something else I desire to
reach that min buy amount however does.
For example:
if I am after certain minifigs
shop a) has fig 1 for 1.99, and fig 2 for 2.99 that I am after - with a min buy
of 5.00 I am at 4.98. 2 cents away
shop b) will have the same one for 2.00 but no min buy - so I purchase that one
(shop a misses out)
shop c) will have fig. 2 for 6.00 and a min buy of 5.00 - and I'll pay the
extra $3 for that one - because it passes the min buy margin.
It's not that I'm paying more that's the issue - it's more so
that shop a, is missing out on business because of literally 2 cents (or even
$2) that I would be more than willing to donate just so save a 5 or 10 minutes.
so now shop a misses out on a possible profit due to selectivity and lack of
a difference feature
|
So you will overpay by $3 and also pay two lots of shipping, which is probably
another $2 minimum. In this example, was there really nothing else under $5 that
you could have added, getting you a cheaper overall price plus a free item?
|
|
| Author: | yorbrick | | Posted: | Jun 1, 2019 04:06 | | Subject: | Re: Option to Donate to reach min. buy | | Viewed: | 37 times | | Topic: | Suggestions | |
| In Suggestions, Brickochet writes:
| | This is a fairly bad marketing idea for shops that probably don't work out
in the shops favour. I know a majority of my browsing has ended up in me taking
my business and money to another shop. Where I am either buying from someone
without a min buy, or selecting other items I actually want to hit that minimum
purchase amount. So my suggestion is to add a donation field/possibility to finish
passing the required purchase line.
I have only made 3 purchases since I joined but these 3 people are profiting
by shop deterrence over the min buy. One of which was a difference of 3 cents
to the min buy vs. paying 1 cent more for the same thing because it didn't
have one.
|
Can't you just buy some extra parts you are likely to need in future?
|
|
| Author: | yorbrick | | Posted: | May 22, 2019 06:12 | | Subject: | Re: which is the correct listing? | | Viewed: | 33 times | | Topic: | Catalog | |
| | | Which is why my part didn't show up properly, most
people are listed as
whereas really they should be
|
There are 87 of the "set", whereas there are 4294 listings for the part. So most
people have listed them as the single part. The sealed ones listed as sets are
likely to be correct, as are the used ones listed as sets as they do not need
to contain the packaging (although the listing should say that).
If you have plenty of a single part set (or single minifigure set), it is often
a good idea to list some as the part (or minifigure) and some as the set, as
different buys will search for different things.
|
|
| Author: | yorbrick | | Posted: | May 21, 2019 04:50 | | Subject: | Re: Brittle Blue | | Viewed: | 80 times | | Topic: | Colors | |
| In Colors, randyf writes:
| | I just opened a brand new
and when I started to build it, the first few
[p=3062b]
in blue that I put on the build cracked almost immediately with an audible sound.
I had never seen or heard anything like this before in any LEGO that I owned,
so I stopped building right away.
When I looked at the parts, I noticed right away that the color of them looked
off. I then remembered that people here in the forums had talked about a "Brittle
Blue". Sure enough, these parts seem to match the typical color that I have found
in the forums for this "Brittle Blue".
After that, I looked through all of the blue parts in the set and noticed almost
all of them have this same off color of blue. I am afraid to try building with
any of the other parts so as not to crack them. It looks like the only blue parts
in the set that are not "Brittle Blue" are the cup, steering wheel stand and
the modified bricks.
Since some people seem to collect pieces in this "color", I was wondering if
anyone in the forums would be interested in some absolutely brand new "Brittle
Blue" pieces that have never been used in any way. If you are interested, let
me know.
Cheers,
Randy
|
That is really bad, it must be disappointing for that to happen when opening
a new set.
Can you guarantee they will break on first use?
|
|
| Author: | yorbrick | | Posted: | May 20, 2019 06:22 | | Subject: | Re: Protest of 3830c01 marked for deletion | | Viewed: | 58 times | | Topic: | Catalog | |
| In Catalog, Cob writes:
| | In protest of 3830c01 being marked for deletion I am not going to sell either
3830 or 3831 on BrickLink.
I sell used bricks, nearly all of these come to me as a complete hinge, in order
to sell them I must either sell them as a pair or manually separate them and
then list them separately.
I still don't understand why they were marked for deletion. There only single
colors in the catalog, no crossed colors, no decorated items. Nothing but plain
single colors.
I will sell them on other well known sites.
Cob
|
While this piece is being discussed, I have always found the name odd. It only
looks like a 1x4 hinge brick when it is paired together. Therefore if it is not
paired, then the parts are not a 1x4 brick. They look like 1x2 bricks with a
bit of modification.
LEGO refers to the individual pieces as a "hinge 1x2 upper part" or "lower part".
Which makes more sense when you are searching for it.
And in terms of setting a precedent:
|
|
| Author: | yorbrick | | Posted: | May 14, 2019 05:17 | | Subject: | Re: Fair, safe and legal trading = BL principles | | Viewed: | 73 times | | Topic: | Suggestions | |
| | | Well, yes, you are right. The seller has to cancel when requested but is entitled
to taking any measures they like. Especially since this Bricklink world is slightly
different from regular online retail as a lot of labour goes into getting an
order together.
Maybe the "without penalty" part wasn't phrased to well. At least I would
like the language to change. Because right now some sellers write things in their
terms like "I don't accept cancellation requests" or "orders are legally
binding contracts" or stuff like that. I think there's an important distinction
between discouraging it / considering it rude or something like that on the one
hand, and making buyers believe they have no actual choice but to pay up on the
other hand. The latter is basically misinformation about the rights that consumers
have. I think vulnerable/naive consumers should be protected by at least being
offered store terms that don't obscure their rights.
|
Yeah, I totally agree. This is sort of covered already in the terms, as sellers
must abide by their local laws, and writing contract terms that go against those
just mean the buyer is likely to win if they ever took the case to small claims
court or equivalent.
That said, the BL terms mention that orders are "legally binding contracts",
which probably needs cleaning up.
| | | | | | - Being responsible for lost shipments - meaning full refund or resend if anything
goes missing
|
And no problem there, and this holds if the buyer pays with paypal anyway. Although
if BL start asking for proof of delivery routinely, this may change smaller orders
as sellers start charging for this.
|
I think Bricklink could do two things in all this: 1. Enforcing by being involved
with the actual transactions, which might be complicated and costly (although
that is not an excuse it is not needed - perhaps it is) and/or 2. Simply moderate
store terms ahead of any transactions a store may be involved in. That's
not too much manual work, and we live in an age where computers can recognize
actual people in photographs, so I'm pretty sure some algorithms can be put
together to spot illegal store term claims. Even with a simple search operation
it's easy to spot them.
I think the main problem has to do with stores having illegal terms more than
store having legal terms but not keeping to them. Once the store terms are sound,
buyers will be able to call out and spot bad sellers pretty easily whenever they
cause trouble that's not in line with their own terms.
|
Yeah, although there are probably ways around the machine learning checks for
terms. It might be better that BL has one set of terms that sellers must agree
to, standardised across all stores. Where necessary there could be country based
amendments (across all sellers in that country) due to local laws.
|
|
| Author: | yorbrick | | Posted: | May 13, 2019 06:03 | | Subject: | Re: Fair, safe and legal trading = BL principles | | Viewed: | 72 times | | Topic: | Suggestions | |
| | |
- Full acceptance of cancellation without penalty and without reason required
|
This issue has been around for years (as has the thread!). There is no legal
right to cancellation without penalty. The buyer has a right to cancel,
but that does not mean that they can order, then cancel. Order, then cancel.
And so on without penalty. If a buyer becomes a problem for a store (whether
on BL or elsewhere), the store is legally entitled to stop selling to them. It
is the same with feedback - feedback does not affect the right to cancellation.
Just because a buyer has a right to cancel, it does not take away the right a
seller has to leave feedback or file a NPB. Of course, if a buyer is responsive
and asks for a cancellation, then many decent sellers will allow cancellations
and they may be more lenient than if the buyer just doesn't pay. But if a
buyer orders then cancels, orders then cancels, orders then cancels, it wouldn't
surprise me if the buyer gets blocked from buying from that store.
| | - Accepting returns and refunding the buyer including the postage cost and the
postage cost of sending it back
|
Again, legally they have this right (although may need to pay return postage
if this is detailed in the seller's terms). But that doesn't mean the
seller cannot block them to stop them doing it again in the future.
Large online retailers are starting to crack down on people buying items, especially
clothes, wearing them with the tags on, then returning them.
| |
- Not charging more for transaction fees than the transactions actually cost
|
No problem there.
| | And last but not least:
- Being responsible for lost shipments - meaning full refund or resend if anything
goes missing
|
And no problem there, and this holds if the buyer pays with paypal anyway. Although
if BL start asking for proof of delivery routinely, this may change smaller orders
as sellers start charging for this.
|
|
| Author: | yorbrick | | Posted: | May 10, 2019 13:54 | | Subject: | Re: Fair, safe and legal trading = BL principles | | Viewed: | 66 times | | Topic: | Suggestions | |
| | | This is great and all of that; as I don't support customs fraud, and so I
support this idea of yours! HOWEVER, the problem with buying internationally
(at least for a Canadian Buyer as myself) is that the sales taxes (GST, HST and/or
PST) *IN PARTICULAR* (it's much, MUCH more difficult to do it with customs
duty fees, but whatever...) aren't usually automatically levied and actually
shown/itemized on invoices for Bricklink orders from Sellers in foreign countries
like the U.S. when the net amount [price of LEGO goods, excluding shipping, handling
and insurance fees (if insurance is requested by the Buyer or is made mandatory
by the Seller)] is over $40, which is the *new* minimum amount in which GST,
HST, PST, etc. can be levied for importing goods via e-commerce. Therefore, this
creates an emotional headache for the Buyer when the mail person delivers the
parcel to the shipping address but asks for sales taxes plus the customs handling
fee payments *before* releasing the parcel to the Buyer (or to someone else on
the Buyer's behalf), as the buyer is often either in one of two situations
– one, he/she is not always home there when the parcel is attempted delivery;
or two, the buyer's own home address is different from the delivering-to
address (the latter one is the one that applies to me personally there), and
the person who is supposedly accepting the parcel on the Buyer's behalf refuses
to pay anything that is owning to various levels of government (sales taxes,
customs duties and/or customs handling fees) on the Buyer's behalf (to which
the Buyer will later pay back to whoever had to pay the various fees to the postal
worker UP FRONT on the Buyer's behalf) – which results the Buyer in needlessly
in having to go to the local post office to pick up the parcel and make "surprise"
payments for any sales taxes (as well as possible customs duty fees, in some
cases) plus the customs handling fee that are owning there.
|
I don't really see how any of this is different to other countries that charge
sales tax on imported goods over a threshold. If you buy over the threshold,
you get taxed. It is your job to know about this as an importer buyer, and there
should not be a surprise.
|
|
| Author: | yorbrick | | Posted: | May 2, 2019 11:37 | | Subject: | Re: Coral | | Viewed: | 47 times | | Topic: | Colors | |
| In Colors, runner.caller writes:
| | In Colors, yorbrick writes:
| | In Colors, SylvainLS writes:
| | In Colors, Teup writes:
| | […]
I'd go for salmon or something like that.
|
Are you talking about the colour of the fresh flesh, the cooked flesh, or the
smoked flesh? At what time of the year the salmon was killed? What did the
salmon eat? Were there artificial colorants added? Or are you talking about
the colour of its scales? And are they the scales on the belly, the head, the
tail? And which of the 8 species of fish that we name “salmon”?
|
Don't start on lavender. I have about 15 different varieties in my garden,
and none of them match the colour of BL's lavender.
|
I'm still waiting on BL to address the different shades of black.
Black
Dark Black
Light Black
Dark Bluish Black
Light Bluish Black
Trans-Chrome Black
Whitish Black
The list goes on!
|
Don't forget "Priests' socks" black. All others are really very, very,
very very dark blue.
https://youtu.be/N8VFecEzkgk?t=32
|
|
| Author: | yorbrick | | Posted: | May 2, 2019 09:22 | | Subject: | Re: Coral | | Viewed: | 39 times | | Topic: | Colors | |
| In Colors, SylvainLS writes:
| | In Colors, Teup writes:
| | […]
I'd go for salmon or something like that.
|
Are you talking about the colour of the fresh flesh, the cooked flesh, or the
smoked flesh? At what time of the year the salmon was killed? What did the
salmon eat? Were there artificial colorants added? Or are you talking about
the colour of its scales? And are they the scales on the belly, the head, the
tail? And which of the 8 species of fish that we name “salmon”?
|
Don't start on lavender. I have about 15 different varieties in my garden,
and none of them match the colour of BL's lavender.
|
|
| Author: | yorbrick | | Posted: | May 1, 2019 12:36 | | Subject: | Re: Make website mobile-friendly | | Viewed: | 37 times | | Topic: | General | |
| In General, crazylegoman writes:
| | I cannot figure out why someone would try to use Bricklink on a phone. A tablet
maybe, but even the biggest phone screens wouldn't be enough to make good
use of this site in any form.
David
|
It depends what you are buying. If just minifigures, then a normal to larger
smart phone screen would be fine if there was a decent interface. Similarly,
if buying from an already set up wants list, a smaller screen is fine.
|
| Author: | yorbrick | | Posted: | Apr 22, 2019 07:40 | | Subject: | Brand filter not working | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
| The brand filter is not working correctly. I have LEGO only turned on, yet I
am shown adverts for non-LEGO items during my searches. Is it possible to turn
off non-LEGO products?
|
|
|
| Author: | yorbrick | | Posted: | Apr 17, 2019 09:45 | | Subject: | Re: Lengths in “L” and 18654 | | Viewed: | 23 times | | Topic: | Catalog | |
| In Catalog, jennnifer writes:
| | In Catalog, randyf writes:
| | My point was that if you categorize it as a bushing, you don't need to worry
about the length of it at all. You don't see the axle bushing above listed
as a "Technic Bush 1L". It is just "Technic Bush". So change that one to "Technic
Axle Bush" and
to "Technic Pin Bush" and problem solved. No need to worry about the length at
all. Like I said, it doesn't and can't connect pins or axles at all,
so it is definitely *not* a "Technic, Pin Connector". And that's a fact.
|
I submitted changes along this train of thought long ago but they were not approved.
It is a 1x1 Liftarm in actuality but functions only as a bushing. I support moving
it to a more appropriate category.
Jen
|
I had never thought of it as a 1x1 liftarm, but that makes perfect sense at least
in an algorithmic type way. A liftarm that cannot actually lift or connect anything!
Maybe go further and rename all liftarms as double bush, treble bush, etc!
|
|
| Author: | yorbrick | | Posted: | Apr 17, 2019 09:07 | | Subject: | Re: Lengths in “L” and 18654 | | Viewed: | 23 times | | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
| | In Catalog, yorbrick writes:
| | […]
Yeah, so why call this a pin 1/2 ... […]
|
Because there’s no constistence to the catalogue?
| | Personally, I'd go with a naming convention of the form:
Pin 2L (with friction ridges) and Stop Bush 1L.
So a normal pin would be a pin 2L, a half pin would be a pin 1L, and so on. Anything
with four half pins would be "with 4 pins 1L" and so on.
|
Okay… provided we agree on what a “L” is and out-of-system dimensions like “2/3
L” are verified before being accepted in the catalogue
|
Yes, consistency is key. Maybe as a definition, call 1L equal to what LEGO call
1M.
|
|
| Author: | yorbrick | | Posted: | Apr 17, 2019 08:45 | | Subject: | Re: Lengths in “L” and 18654 | | Viewed: | 24 times | | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
| | In Catalog, yorbrick writes:
| | | | No. A "pin" is the standard Technic pin. Basically, half of
|
Why half of it? And if it was half of it, shouldn't that one be named a "double
pin". […]
|
But
has only one pin, or is the other half considered hidden inside the brick?
And
and the like are “pin”s, not “half-pin”s and there’s no room for a hidden second
half.
|
Yeah, so why call this a pin 1/2 ...
And this ...
And everyone's favourite, the flick missile ...
Personally, I'd go with a naming convention of the form:
Pin 2L (with friction ridges) and Stop Bush 1L.
So a normal pin would be a pin 2L, a half pin would be a pin 1L, and so on. Anything
with four half pins would be "with 4 pins 1L" and so on.
|
|
| Author: | yorbrick | | Posted: | Apr 17, 2019 08:19 | | Subject: | Re: Lengths in “L” and 18654 | | Viewed: | 26 times | | Topic: | Catalog | |
| | | No. A "pin" is the standard Technic pin. Basically, half of
|
Why half of it? And if it was half of it, shouldn't that one be named a "double
pin".
I have always taken a pin to be that whole part. If you have half of it, then
you have half a pin. Which is how this one is named.
And of course if you have 3/4 of it, you get this one.
But then the naming problems come with longer ones.
and so on. These should be 1.5 pins but now use the L naming instead so 3L.
Maybe normal pins should be called "pin 2L", half pins could be called "1/2 pin
1L" and so on, although just "pin 1L" would do if the L designation is used.
Especially when things like this are named
as pin double, when really they are "pin 1/2" double. And double is also used
here:
What is double here, is it two full pins joined side by side with a stop bush
inserted into the middle with an axle hole (as suggested by the name), or is
it quadruple 1/2 pins? Plus the L dimensions are not given.
Worse still, this one is now not a double, but four pins (really 1/2 pins).
Or should it be a double pin, where the pins are separated with something in
the middle, like above.
Plus this one isn't a pin anymore, whereas the one above is.
|
|
| Author: | yorbrick | | Posted: | Apr 8, 2019 13:06 | | Subject: | Re: Lego Store Pick Brick Wall Small Cup Vs Large | | Viewed: | 38 times | | Topic: | Inventories | |
| In Inventories, randyipp writes:
| | In Inventories, POPS_BLOCK_SHOP writes:
| | Made a short 4 minute video with spreadsheet and all of what Cup is a better
value at Lego Store Pick a Brick Wall.
LARGE Vs. SMALL
https://youtu.be/4ewH-smrNFc
|
Unless you get exactly the same thing in each cup this calculation really doesn't
work. It works for you if you are curious as to the value you got but really
has nothing to do with the difference in size.
Just one example: You have the 28 1x4 which would be equivalent to about 250-350
1x1 round plates which equals nearly $12 (assuming 300).
I think a simple solution would be to fill the small cup with water twice and
dump it into the large cup to see what the difference in volume is.
|
That is a rough guide but with bricks you cannot fill the cups completely due
to voids. I know in the past people have checked the value of filling a big vs
small cup with just one type of part at a time (2x4 bricks or 1x1 round tiles).
For example, you can get 102 2x4s (8.8c each) in a small cup, compared to 167
(9.6c) in a large. Whereas if you just scoop into the small cup, it is down at
56 bricks (16.1c).
https://www.youtube.com/watch?v=AGIS2rwYPTc
|
|
| Author: | yorbrick | | Posted: | Apr 8, 2019 12:58 | | Subject: | Re: Keffiyeh vs Turban | | Viewed: | 29 times | | Topic: | Catalog | |
| | | Well, I’m sure there’s peacockery somewhere (bad, bad pun) but “corne” is a common
term in French for angled/folded —wait for it— corners!
Yes the English “corner” is about horns too
|
Of course, Little Jack Horner sat in the corner ...
|
|
| Author: | yorbrick | | Posted: | Apr 8, 2019 12:35 | | Subject: | Re: Keffiyeh vs Turban | | Viewed: | 31 times | | Topic: | Catalog | |
| | | You’ll note that on that page, keffiyeh is spelled keffiyah.
(While the wiktionary lists kaffiyah, kufiya, and kufiyah as alternative spellings,
but not keffiyah.)
|
Spellings and especially accents are a real pain.
My claim to fame is that I managed to get "Palantir" added to "Palantír".
* | | 54821pb02 Ball, Bionicle Zamor Sphere with Marbled Trans-Yellow Pattern (Palantír, Palantir)
Parts: Ball |
Not only didn't I know there was an accent on the i, as an English speaker/writer
I haven't a clue how to add an accent anyway so would never have been able
to search for it.
I tried similar for Joachim Low, Mesut Ozil, and so on, but they were rejected.
For some reason, Jérôme (Jerome) Boateng is allowed as a minifigure name only,
but as a set he is just Jérôme Boateng. The one that is a pain is André Schürrle,
as he has an accent in both names so cannot be searched unless you can enter
accents or cut and paste his name. Quicker to just search for "DFB" instead.
|
|
| Author: | yorbrick | | Posted: | Apr 8, 2019 11:29 | | Subject: | Re: Keffiyeh vs Turban | | Viewed: | 30 times | | Topic: | Catalog | |
| In Catalog, velocity.rex writes:
| | I get a little annoyed every time I encounter this piece.
It's always the same cycle, I search "turban" because it's very similar
to a turban.
and all that pops up are these;
&
So then I remember that the piece I'm looking for is on a few of the Prince
of Persia minifigs so I go to catalog, minifigs, prince of persia, and then scroll
until I find one with the matching headgear, and then drill down into it's
inventory to find that it's called a "Keffiyeh"
to which my response is, "oh, well, I'll probably never remember that..."
I wish the description was "Headgear Headdress Cloth Wrap Keffiyeh (Turban)"
even if it's not technically a turban. It would help me find it faster in
the future.
At any rate, taking the time to type this all out should help me remember in
the future and I discovered that one only has to type "kef*" in the headgear
search and this pops up so I should be able to remember those 3 letters at least
going forward.
Took me awhile to remember "kepi" for this part too, but I remembered eventually.
|
You can request a change, to add the word turban to it. https://www.bricklink.com/catalogReq.asp?itemType=P
For example, Katana was added to this one:
Fortunately, the more basic "sword" was also kept!
|
|
| Author: | yorbrick | | Posted: | Apr 8, 2019 10:39 | | Subject: | Re: inconsistencies | | Viewed: | 35 times | | Topic: | Catalog | |
| In Catalog, POPS_BLOCK_SHOP writes:
| | Just Ask Bricklink to change the description of what you think is wrong. I have
been doing the last few weeks and they have changed the description on everything
I asked them to.
Example
Item No: 14769pb196
Used to have title
Tile, Round 2 x 2 with Bottom Stud Holder with Tree Trunk Pattern
I was searching for Wood Grain which was not in the description at all. Not "Wood"
or "Grain"
I sent request and within 2 days they updated it to
Tile, Round 2 x 2 with Bottom Stud Holder with Tree Trunk, Wood Grain Pattern
I also made a youtube video on how to submit such things to help make bricklink
better!
https://youtu.be/H3M6AlhoEUM
|
While names are updated quickly, I doubt that they will update categories so
freely. Some people sort and store by type, and to just move a part from one
type to another is not something they should do without careful thought.
|
|
| Author: | yorbrick | | Posted: | Apr 8, 2019 10:30 | | Subject: | Re: Lego Store Pick Brick Wall Small Cup Vs Large | | Viewed: | 35 times | | Topic: | Inventories | |
| In Inventories, POPS_BLOCK_SHOP writes:
| | Made a short 4 minute video with spreadsheet and all of what Cup is a better
value at Lego Store Pick a Brick Wall.
LARGE Vs. SMALL
https://youtu.be/4ewH-smrNFc
|
If you think you can sell them for the 6c price, you should have filled up with
the 1x1 round tile (closed eye). You can pack more than 3x of those than the
2x2 corner plate into either cup, and 3x6c = 18c, more than the "best value"
2x2 corner plates at 10c.
That might also be why your small cup appears better value, as you have 173 of
this part in the small cup but only 285 in the large cup. To make a fairer cost
comparison, you could have put 308 into the large cup (173*$16/$9). Or keep the
ratios of all the parts you add the same in both cups.
|
|
| Author: | yorbrick | | Posted: | Apr 8, 2019 10:14 | | Subject: | Re: inconsistencies | | Viewed: | 45 times | | Topic: | Catalog | |
| In Catalog, edk writes:
| | why is a plate modified when is a tile modified?
|
There is no consistency, both could be either.
You could say the parent of 6576 is either a 4x8 plate or 4x8 tile, but the 4x8
tile doesn't exist so 6576 must be a modified plate.
Or you could say you add 12 studs to the tile or remove 20 studs from the plate,
so it is closer to being a tile than a plate.
For 88646, neither the parent tile or plate exist. You add 4 studs to the tile,
but remove 8 from the plate and also have to shift them. So does that make it
a modified tile rather than modified plate?
If so, then the 1x2 jumper should be a modified tile (add one stud, vs remove
and move one stud). Similarly a 2x2 jumper is definitely closer to a tile than
a plate but is still a modified plate. Worse still, this pack of jumper bricks:
contains no bricks at all.
is clearly a 2x2 plate with two studs removed, but it is a modified tile.
is also a modified tile rather than plate (compare to 6576).
|
|
| Author: | yorbrick | | Posted: | Apr 4, 2019 04:10 | | Subject: | Re: Seprate entries for each book of instructions | | Viewed: | 41 times | | Topic: | Suggestions | |
| In Suggestions, irwando writes:
| | If a set comes with instructions that are across multiple books please allow
listing each book separately. Many retailers are indicating a specific book
in the description which breaks all of the handy search tools. It also makes
it difficult as a buyer to be sure I'm getting full sets.
|
You should always get the full set of instructions, unless otherwise noted.
|
| Author: | yorbrick | | Posted: | Apr 3, 2019 11:37 | | Subject: | Re: Help identifying these green colors | | Viewed: | 38 times | | Topic: | Colors | |
| In Colors, Juster_Bricks writes:
| | Help identifying these green colors
|
Looks like sand green and light green.
|
| Author: | yorbrick | | Posted: | Apr 3, 2019 04:32 | | Subject: | Re: 53705 - Copper and.. something else? | | Viewed: | 29 times | | Topic: | Colors | |
| In Colors, TorontoLego writes:
| | I have one of these
[p=53705]
In a colour I would describe as metallic rose, or metallic red?
It is different from the copper ones, even with the variation in that colour.
What do you think?
|
I imagine it is copper, I have seen a wide variation in metallic colours in that
part.
|
|
| Author: | yorbrick | | Posted: | Apr 1, 2019 04:35 | | Subject: | Re: Make paperwork optional | | Viewed: | 53 times | | Topic: | Suggestions | |
| In Suggestions, cosmicray writes:
| | As this has been a controversial topic recently, perhaps we should make it a
buyer select-able option.
Allow the buyer to choose to receive paperwork with the order, or to have the
order shipped without paperwork. The seller would then be obliged to follow the
buyer's selection.
thank you, Nita Rae
|
Only if the seller has the right to refuse to add paperwork and allow them to
charge for it if a buyer wants it. If not selected by the seller, then the buyer
should not be offered paperwork. If the seller is willing to print the order
out and include it, then let them have the option. But don't force it on
all sellers.
|
|
| Author: | yorbrick | | Posted: | Mar 25, 2019 07:53 | | Subject: | Re: cant's see all color variants listed on sale | | Viewed: | 27 times | | Topic: | Catalog | |
| In Catalog, BombaFett writes:
| | Hello, I saw a problem regarding catalog view. I cant's see all color variants
listed on sale. When I add a brick in a unique color, it does not appear to me
on the list of bricks available for sale. Does anyone know what the reason is?
|
Are you looking under "all" or "known" colors?
|
| Author: | yorbrick | | Posted: | Mar 21, 2019 12:39 | | Subject: | Re: Ghost Buy feature from sellers own store | | Viewed: | 56 times | | Topic: | Suggestions | |
| I imagine the BL worry is that a buyer could just email a xml file to a seller,
they pick the order as themselves so no fees, invoice by email, then send it
off.
|
|
| Author: | yorbrick | | Posted: | Mar 11, 2019 11:42 | | Subject: | Re: Helmet 90392pb01 metallic gold or tan? | | Viewed: | 41 times | | Topic: | Colors | |
| In Colors, axaday writes:
| | In Colors, SylvainLS writes:
| | In Colors, crepundi writes:
| | I have a question about part
Under known colours it is listed in black and metallic gold. I have this part,
but in fact it is not metallic gold but tan (inside) and the outside is only
printed metallic gold. Is this the regular version that shoul be listed under
metallic gold?
|
I’d say it’s the regular version: Metallic Gold isn’t a plastic colour, it’s
coated on another colour (generally Tan).
On the other hand, I thought the coating always cover all the part’s surface
(but I don’t have many parts in MG, and none hollow/concave like a hat/helmet).
|
It makes sense not to paint the inside of a helmet if the way they do it allows
for that.
|
Yes, some chrome parts, such as this torso are similar:
It is the base colour inside (which is OK) but also if you move the arms from
their down position (much worse!). The paint shadow shows that they coat the
torsos after the arms are inserted.
|
|
| Author: | yorbrick | | Posted: | Mar 8, 2019 13:32 | | Subject: | Re: How should i name this set? | | Viewed: | 40 times | | Topic: | Catalog | |
| In Catalog, GoudvanOud writes:
| | Last question about it, i hope.
I want to add this set to the catalog, but how should i number/name it? There
is no set number to be found.
|
This set is on ebay - same photos. 183718197300
Is it yours?
|
| Author: | yorbrick | | Posted: | Mar 7, 2019 12:22 | | Subject: | Re: How should i name this set? | | Viewed: | 32 times | | Topic: | Catalog | |
| In Catalog, Biglesdug writes:
| | In Catalog, GoudvanOud writes:
| | Last question about it, i hope.
I want to add this set to the catalog, but how should i number/name it? There
is no set number to be found.
|
Exploriens Value Pack
space: Exploriens: vp-25
maybe?
|
I would add "Space 3-Pack" to the title, seeing as that is what is written on
it. If someone doesn't know what it is, that will probably be a search term.
|
|
| Author: | yorbrick | | Posted: | Mar 6, 2019 06:19 | | Subject: | Re: how to? - hypothetical inventory from a haul | | Viewed: | 80 times | | Topic: | Inventories | |
| In Inventories, MichiKen writes:
| | I am looking for a tool that will help me identify inventory bulk lot purchase
of Bionicles.
There were about 2 cubic feet of Bionicles that I would like to sell. There were
only 3 instruction sets in the lot. Traditionally I would find the sets on BL,
then print them to check off those sets I have, and what on the lot is found.
I put these into bags, and work my way through the lot until I have complete
sets, or know just some small parts to replace/purchase.
This appears very old-school. What I would like is a like a "hypothetical" inventory,
that I can add a complete set, then click on the items as "found". This would
be nice if I could tag this to a lot for when I buy things off eBay or Facebook
Marketplace.BL to do this?
|
Use this tool to identify sets:
https://www.bricklink.com/catalogIn.asp?viewMulti=Y
|
|
| Author: | yorbrick | | Posted: | Mar 1, 2019 12:00 | | Subject: | Re: How to list? | | Viewed: | 27 times | | Topic: | Catalog | |
| In Catalog, Bendix writes:
| | How and where to list keychain figures with logo on the back, please? These figures
are leftovers from production and never had a chain.
Thanks in advance
Beryll
|
Do they still have holes in the head? I guess they are glued? If so they cannot
be sold as parts. I guess you could try selling as glued minifigures, but they
might be more interesting to buyers to sell as keychains without the chain.
|
| Author: | yorbrick | | Posted: | Feb 26, 2019 11:33 | | Subject: | Re: Unknown Lego part, 2 x 2 curved Top? | | Viewed: | 40 times | | Topic: | Catalog | |
| In Catalog, JETTY writes:
| | Sorting through a lot from a former LEGO employer I fount these unknown parts,
I cant seem to find them in the catalog, guess they are test bricks?
The other ones are 30165 in unusual colors, now for sale in my shop
|
These in tan and dark purple? or are they a different colour, it is hard to tell.
|
| Author: | yorbrick | | Posted: | Feb 26, 2019 04:01 | | Subject: | Re: Why is Finch Dallow sw1005 from 2017? | | Viewed: | 23 times | | Topic: | Catalog | |
|
Although box art didn't change, there are some other similar sets:
Glow in the dark vs non-glow in the dark.
Sheild vs shield version.
|
|
| Author: | yorbrick | | Posted: | Feb 21, 2019 05:39 | | Subject: | Re: Fine print regarding lot quanities | | Viewed: | 43 times | | Topic: | Suggestions | |
| In Suggestions, wrightcrystal50 writes:
| | I just wasted 6 hours placing an order just find out fine print stated I could
only buy lots in quantities of a $1. If this is a stipulation of a seller I
shouldn’t have to sift through fine print to find it. Likely I will not use
this site again until this is fixed. I quickly learned (100) meant quantities
divisible by 100 and when I miss that I am warned which is great and very helpful.
It should be the same when sellers have a stupid rule similar to described.
If a seller wants to have a stupid rule so be it, but it should be more obvious
to the buyer when selecting quantities to purchase.
|
Do you mean the average lot value is $1, or that every lot must be a multiple
of $1 (or at least $1)?
Average lot values are common now, and should be stated at the top of the page
in a store if the seller has correctly implemented them.
|
|
| Author: | yorbrick | | Posted: | Feb 18, 2019 05:22 | | Subject: | Re: Original Box Entry for Games (gear) | | Viewed: | 32 times | | Topic: | Suggestions | |
| In Suggestions, agulus writes:
| | I would like to suggest creating
Original Box Entry for Games in Gear.
The same way it is in sets.
I have some boxes and I see other people
selling boxes only as incomplete gear
and it decreases 6 months average.
|
It has been asked a number of times in the past, I think the reason is that anything
in "gear" is defined as not have packaging.
Also gear cannot be incomplete which is why you have to make sure you exclude
these when thinking about value.
Another good use for the boxes is for posting large numbers of baseplates.
|
|
| Author: | yorbrick | | Posted: | Feb 16, 2019 14:09 | | Subject: | Re: We need a modern way to part out sets. | | Viewed: | 51 times | | Topic: | Suggestions | |
| | | When parting out huge sets with thousands of pieces, it would also be nice to
be able to save the progress and continue later. Maybe there should be one upload
button for each lot, so I don't have to go through the entire list first
and then submit all changes at once.
|
Use the "exclude all parts" option when you part out, that way you can click
each part as you include them. It means you can stop uploading parts during
a part out whenever you like without all of the others being uploaded too.
|
|
| Author: | yorbrick | | Posted: | Feb 15, 2019 04:13 | | Subject: | Re: Irresponsible people in bricklink | | Viewed: | 70 times | | Topic: | Suggestions | |
| In Suggestions, ASSK writes:
| | Guys, what i am saying maybe cliché but many sellers here should have already
experienced those irresponsible people who order and go away or give those funny
excuses blah blah blah. i am not asking for any kind of punishment to those people,
i just hope the management of bricklink can work out something to avoid these
so as to have a better protection to our sellers.(such as set limitations for
new account or consequences of cancellation) thank you for your time. God bless.
|
Why not use the existing setup of reporting them as non-paying buyers rather
than requesting a new feature.
|
|
| Author: | yorbrick | | Posted: | Feb 12, 2019 11:32 | | Subject: | Re: Aren't these differences ridiculous? | | Viewed: | 62 times | | Topic: | Catalog | |
| In Catalog, axaday writes:
| | In Catalog, brikomania writes:
| | I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
It would be nice if the catalog had the sophistication to have a metapart that
would collect listings of all three in a search if someone really didn't
care which.
|
I guess it does in a way as you can search for "arch 1 x 6 x 2 -curved -pattern"
if you don't care which one you get, but it only really works for searches
and not wants lists. So yes having a metadata tag to link them would be good.
Same for a number of other parts with minor variations that may be inconsequential
for some people but important for others.
|
|
| Author: | yorbrick | | Posted: | Feb 12, 2019 06:34 | | Subject: | Re: Aren't these differences ridiculous? | | Viewed: | 95 times | | Topic: | Catalog | |
| In Catalog, brikomania writes:
| | I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
The thin / thick thing is described in the notes, and mm dimensions given. Personally,
the difference between the old and new style (with/without the reinforcement)
is enough, but I I can understand why the different variants are there.
|
|
| Author: | yorbrick | | Posted: | Feb 8, 2019 04:19 | | Subject: | Re: Please approve, in hand | | Viewed: | 63 times | | Topic: | Catalog | |
| In Catalog, Rakali writes:
| | In Catalog, tEoS writes:
| | I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
I'm hoping they do release worldwide, and not limited. It would be stupid
not to. If they don't release Emmet and Wyldstyle, then there is no point
in wider releases of Sweet Mayhem and Benny.
|
|
| Author: | yorbrick | | Posted: | Feb 6, 2019 07:38 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 51 times | | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
I agree there should be different qualities of used, although it would probably
cause more arguments than it will solve.
I tend to avoid buying any used parts unless absolutely necessary simply because
for some sellers used means any old junk. It is unfair on sellers that take pride
in their used parts and sell only the best quality. I am also probably missing
out on getting decent used parts and instead pay higher for new, but I was burned
on my first few transactions here and quickly learned not to buy used. If there
was a "like new" used condition, I'd probably buy more used.
|
|
| Author: | yorbrick | | Posted: | Jan 31, 2019 15:02 | | Subject: | Re: Discount on only used parts? | | Viewed: | 36 times | | Topic: | Catalog | |
| In Catalog, Edwin073 writes:
| | Hello all,
I have a question. Hope you can help me.
I would like to give all my used parts a 20% discount. How can I only select
my used parts so I can put in the discount? If I use the search option I will
get everything what's used in my inventory included my sets, instructions,
minifigures etc...
I only want my parts on discount. Do I have to do this for every parts individually
now or is there a other way?
Thanks.
Edwin
|
Go here, enter the discount, then under condition select items that are USED.
https://www.bricklink.com/inventory.asp
|
|
| Author: | yorbrick | | Posted: | Jan 31, 2019 15:00 | | Subject: | Re: Lego Movie 2 set 71023 Mini Figures | | Viewed: | 39 times | | Topic: | Catalog | |
| In Catalog Requests, MarshMan80 writes:
| | Hello again, its Thursday now and I'm just wondering when this will be entered
or available for us to use so me can get or product listed.
|
A day or two. Official release date is tomorrow.
Although they have been out here for a couple of weeks now. My early ones went
on ebay.
|
|
| Author: | yorbrick | | Posted: | Jan 28, 2019 04:37 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 25 times | | Topic: | Catalog | |
| In Catalog, randyf writes:
| | In Catalog, Admin_Russell writes:
| | Thanks, everybody, for the responses.
In the last 12 days we have sold as many of the complete series as were sold
in the last 5 months under the random entry.
In response, I have added another of these collective entries:
And when we add The LEGO Movie 2 Series in a few days, it will also have an "entire
series" entry so we can see how it does from the start.
|
Too bad it took almost a *DECADE* for the catalog to move in this direction!
People said that more series of minifigs would sell this way from the very beginning
and the catalog would not listen. People said superlots were a pain in the butt
for these from the very beginning and the catalog would not listen. People said
that selling complete sets under the random entry would screw up the price guide
from the very beginning and the catalog would not listen.
Now we have the start of some data to prove that BrickLink lost out on a *LOT*
of potential sales over all of those years because of the unwillingness of the
catalog to move forward on something that the membership clearly wanted from
the very beginning.
It is very nice to see the catalog move in this direction for those of us who
wanted these entries in place for years upon years.
Here's to hoping that all of the other series are added very soon!
|
I agree it has been a pain that it has not happened in the past to maintain the
"purity" of the catalogue. Same with other important assemblies (like Treebeard
and Groot).
I really hope that BL is now seeing the catalogue as a tool of the marketplace
to enable sellers to sell and buyers to buy, rather than something that has to
be defined by rules set in stone from decades before.
Even though they might not be used as much, I hope all the older entries can
be inserted for consistency.
And thanks to Russell for testing this and reporting back on the results, which
are not that surprising. Although all mine went on ebay again this time around.
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 10:45 | | Subject: | Re: Feedback removal | | Viewed: | 25 times | | Topic: | Suggestions | |
| | | As I’ve said, we’re not talking about a large discrepancy. I do have a single
s/h charge. It’s $4.99 for standard mail for any order size
which is closely related to actual cost on average. Minimum postage is $3.66
plus all associated fees/materials/etc.
|
And I would say that is fine, adding on a dollar or so for additional costs is
reasonable. And I imagine most buyers here would agree with that. I can see that
is the case, as a huge majority of your customers don't mention it, but one
has.
What you are proposing would ban that user from leaving poor feedback about shipping
costs. However, it wouldn't just ban users where the additional costs are
not too severe, but it would also ban users from leaving poor feedback where
the shipping costs have been massively inflated at the checkout for profit rather
than be based on realistic costs.
Remember not everyone knows the sizes of parcels, the cost structures of international
postal companies based on weight and size, the weight of the packaging a seller
is using, and so on. Sellers need to be believed that they are selecting the
right postal service for a package and are charging honestly for it. If buyers
cannot leave feedback about postage costs just because they already agreed to
them up front, then I imagine it would be abused. Sellers could make out a parcel
is large, charge for a high shipping band, then send it via a cheaper one and
tell the buyer they agreed to it so they cannot complain.
I prefer a feedback structure where sellers can be outed if they do wrong, even
if it means one person every so often complains about something when they probably
shouldn't have.
Does one neutral feedback in a few hundred damage a seller? No.
Does stopping buyers from commenting on whether they think someone is a fair
seller damage the marketplace? Yes.
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 10:25 | | Subject: | Re: Feedback removal | | Viewed: | 31 times | | Topic: | Suggestions | |
| | | I must agree with what the others have said... you see what you pay, you can
agree or disagree. I don't see why your stance would shift from agree to
disagree if you found out that what you paid was spent relatively less on postage
and more handling than you had imagined.
|
Out of interest, would you buy from them again knowing they overcharge for postage?
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 10:23 | | Subject: | Re: Feedback removal | | Viewed: | 33 times | | Topic: | Suggestions | |
| | | Why would it be necessary to explain to the customer my individual expenditures?
For example, does amazon need to justify what they charge for shipping?
You do know what it will cost to post, it’s the number in the shipping cost box
at checkout. The buyer doesn’t determine what is or isn’t the cost associated
with a purchase, they simply agree or not. It’s not the customers right to decide
what my real costs are as a seller as they don’t pay my bills (literally not
indirectly). Not knowing the real costs of the seller is not the same as being
conned.
|
You are not amazon though. Most sellers here charge reasonable postage charges
and most buyers can accept that if a seller says it is going to cost $X to post
it will cost that. Some charge exact shipping, some charge a little more. I don't
think anyone really cares about the small incidental expenses.
Imagine there are three postage bands for the weight of the item you have purchased,
one costing £2.95, one £5.05 and the last one £12.12, and the cost depends on
the size of the item. I use these as they are real examples here, but of course
it is complicated in that other options are available. But you don't know
the size of the item. Now if the seller tells you it will cost £14 to post, it
seems to the buyer that this is going to have to go as a large parcel, with a
little extra to cover incidental costs. So they argree and pay. Then when it
arrives, the buyer can see that the seller was able to use the £2.95 band, the
extra was there as profit for the seller. You agreed to the postage costs upfront,
so you cannot complain that the seller overcharges for postage. How do you feel
when you realise the seller quotes based on something that looks like the top
band for large parcels, then uses a lower one for smaller parcels?
Would you prefer for buyers to contact you before ordering and ask why the postage
is so high, for what the buyer thinks should be a small parcel, but you are being
charged a large parcel?
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 08:51 | | Subject: | Re: Feedback removal | | Viewed: | 26 times | | Topic: | Suggestions | |
| That the cost of the label and not
| | a penny more is all that is reasonable to be charged for an item. There are so
many costs associated with a purchase that it doesn’t make sense to me to individually
itemize everything on a per transaction basis and rather just roll it all into
a single s/h charge.
|
I don't think that is the case. Reasonable expenses are fine.
I prefer to see a single S+H charge but it should be related to what it costs
to post.
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 08:48 | | Subject: | Re: Feedback removal | | Viewed: | 30 times | | Topic: | Suggestions | |
| In Suggestions, mattkaupke writes:
| | In Suggestions, Rob_and_Shelagh writes:
| | In Suggestions, mattkaupke writes:
| | Maybe it’s just me but I’m not sure it’s fair to allow buyers who use the Instant
Checkout feature to leave poor feedback relating to shipping costs. I totally
understand being surprised by a high shipping cost when being invoiced but there
are no surprises with instant checkout. It’s totally in the buyers court to make
the purchase with the costs known up front. Also, if invoicing and the shipping
and handling charges are clear in the terms tab, it should also be removable.
I’d really like to see a change made to the feedback policy that allows for removal
of feedback when the purchase is made through the Instant Checkout function.
It’s not reasonable to allow a buyer to damage the reputation of a seller for
something the buyer agreed to.
I'm underwhelmed with the support from BrickLink as far as feedback is concerned.
If the buyer or seller can show that they are completely without fault BrickLink
should be able to remove feedback that is unwarranted.
|
Just because a buyer agrees to something, it does not neccessarily mean he/she
loves it.
Just because buyer or seller is not at fault it does not mean a transaction is
neccessarily positive.
Robert
|
It still doesn’t warrant damaging the reputation of the seller. The buyer didn’t
“not love it” enough to go to another seller or not make the purchase. It’s an
agreed upon thing. It wasn’t a lack of service or any justifiable reason.
|
So would you tell the buyer upfront that the "postage" charge is broken down
into $1 for this, $1 for that, and another $2 for this, and so on? So that they
know you are adding lots of other charges into it.
Sometimes I don't know what something will cost to post, as I don't have
it in hand. If a seller tells me it is going to cost what a large parcel costs
to post, I assume it is a large parcel and agree to it. If it later turns out
it wasn't a large parcel and was posted for a much lower price then I feel
conned that I was overcharged for postage, even though I agreed to it. Leaving
feedback saying this in that case is justifiable.
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 08:40 | | Subject: | Re: Feedback removal | | Viewed: | 29 times | | Topic: | Suggestions | |
| In Suggestions, mattkaupke writes:
| | In Suggestions, yorbrick writes:
| | In Suggestions, Bricks_NW_UK writes:
| | | |
It depends. If a seller charges $10 for postage through IC then it turns out
the actual cost was $2, I'd be pretty annoyed and would leave feedback reflecting
that. In that case the seller is not without fault, so why should the buyer have
their feedback removed in that case?
|
Because the buyer knew the cost of postage when he ordered. If he didn’t like
it he shouldn’t have continued with the order.
(By the way, we are totally against instant check out!)
|
Of course the customer accepted that would be the cost for postage, but then
later found out it was not true and that the seller is overcharging for postage
via IC. Should other buyers be warned about that? In my view, yes.
|
No warning is necessary through feedback as that information is available at
checkout. We’re all adults here and should be capable of making sound decisions
on our own. Additionally, I’d say the “actual” cost is rarely the actual cost.
The label may have cost $2, the baseline price is closer to $3.50 for USPS first
class,but there are certainly many more considerations when calculating shipping
(cost of materials, labels, tape, box or envelope, fuel and time to drop it off
(if I live 30mins from a post office my real costs may be higher than yours if
you’re close to a drop off)). Yes, $10 for shipping on a $2 label would probably
be excessive but we’re not talking about excessive here, nor should it matter
since it was what was agreed on with the buyer. Any poor feedback left is just
unreasonable.
|
Just because you are told something up front doesn't mean you shouldn't
comment on it.
For example, sellers often say something along the lines of "New doesn't
mean mint, new parts may have scratches" in their terms. If a seller sends out
heavily scratched new parts, should the buyer be allowed to comment via feedback?
After all, they agreed that parts may be scratched when they placed the order.
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 08:03 | | Subject: | Re: Feedback removal | | Viewed: | 40 times | | Topic: | Suggestions | |
| In Suggestions, Bricks_NW_UK writes:
| | | |
It depends. If a seller charges $10 for postage through IC then it turns out
the actual cost was $2, I'd be pretty annoyed and would leave feedback reflecting
that. In that case the seller is not without fault, so why should the buyer have
their feedback removed in that case?
|
Because the buyer knew the cost of postage when he ordered. If he didn’t like
it he shouldn’t have continued with the order.
(By the way, we are totally against instant check out!)
|
Of course the customer accepted that would be the cost for postage, but then
later found out it was not true and that the seller is overcharging for postage
via IC. Should other buyers be warned about that? In my view, yes.
|
|
| Author: | yorbrick | | Posted: | Jan 24, 2019 07:46 | | Subject: | Re: Feedback removal | | Viewed: | 51 times | | Topic: | Suggestions | |
| In Suggestions, mattkaupke writes:
| | Maybe it’s just me but I’m not sure it’s fair to allow buyers who use the Instant
Checkout feature to leave poor feedback relating to shipping costs. I totally
understand being surprised by a high shipping cost when being invoiced but there
are no surprises with instant checkout. It’s totally in the buyers court to make
the purchase with the costs known up front. Also, if invoicing and the shipping
and handling charges are clear in the terms tab, it should also be removable.
I’d really like to see a change made to the feedback policy that allows for removal
of feedback when the purchase is made through the Instant Checkout function.
It’s not reasonable to allow a buyer to damage the reputation of a seller for
something the buyer agreed to.
I'm underwhelmed with the support from BrickLink as far as feedback is concerned.
If the buyer or seller can show that they are completely without fault BrickLink
should be able to remove feedback that is unwarranted.
|
It depends. If a seller charges $10 for postage through IC then it turns out
the actual cost was $2, I'd be pretty annoyed and would leave feedback reflecting
that. In that case the seller is not without fault, so why should the buyer have
their feedback removed in that case?
|
|
| Author: | yorbrick | | Posted: | Jan 14, 2019 13:13 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 29 times | | Topic: | Catalog | |
| In Catalog, LordSkylark writes:
| | In Catalog, Admin_Russell writes:
| | In Catalog, alphadavy writes:
| | In Catalog, yorbrick writes:
| | | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
Isn't there a better way to reword these types of entries?
"Complete Random Set of 1 Minifigure"
This wording still seems confusing. Even if "Complete Set of 1 Random Minifigure"
it would make more sense. But I would think using "complete" makes it confusing
for the most part.
|
Personally, I would go for something along the lines of:
41775-1 Minifigure, Unikitty!, Series 1 (1 Random Set = 1 Random Character)
and
41775-2 Minifigure, Unikitty!, Series 1 (1 Complete Series of 12 Sets = 12 Characters)
However, I think the images chosen for these are fine and show what is needed.
|
|
| Author: | yorbrick | | Posted: | Jan 14, 2019 13:06 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 45 times | | Topic: | Catalog | |
| | | Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
Hi Russell,
Thanks for responding and doing something about it so quickly!
However, it might be better tested on a new series and possibly a more traditional
/ popular one too, so could it also be done for TLM2 series once it comes out.
|
|
| Author: | yorbrick | | Posted: | Jan 14, 2019 04:15 | | Subject: | Re: Complete set of Unikitty CMFs? | | Viewed: | 42 times | | Topic: | Catalog | |
| | | | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
