Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | randyf | Posted: | Sep 9, 2019 11:13 | Subject: | Re: Inventory Change Request for Set 41335-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, Soviet writes:
| Please make changes to the following inventory:
* Delete 1 Part 27965 Medium Lavender Hose, Flexible 22L with 2 Connector Ends (Zipline) (Extra)
Comments from Submitter:
There's no extra 828618 part.
|
From the Additional Information About Extra Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562#extraItems
Removing or Changing Extra Items - Extra parts can vary depending on when
and where a set was manufactured, meaning that some new sets may include them
and others may not. The quantity of these extra parts can also vary. Extra parts
are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error.
This extra part was found in some sealed copies of this set so it will not be
removed and this request will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Sep 8, 2019 16:29 | Subject: | Re: Question regarding: 4486-1 | Viewed: | 51 times | Topic: | Catalog | |
| In Catalog, CCBricks writes:
| Greetings all...
I had a question regarding the following set:
Can anyone confirm, who has this set, how many bags are included? I have this
set without the box. It contains 2 bags and the instructions. It looks like
everything is there.
|
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5652397
|
|
Author: | randyf | Posted: | Sep 4, 2019 12:44 | Subject: | Re: Help with color | Viewed: | 41 times | Topic: | Colors | |
| In Colors, WoutR writes:
| I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Sep 2, 2019 21:22 | Subject: | Re: Color Identification | Viewed: | 35 times | Topic: | Colors | |
| In Colors, antiquer88 writes:
| I need some help identifying the color of the Bionicle mask on the right. It
is part #32573. It came in a large lot of used Bionicle parts, so I don't
know what set it came from originally. Supposedly, it only comes in Black, Blue,
Dark Gray, Light Gray, Lime, Medium Blue, Orange, Tan, Yellow, Copper, and Pearl
Light Gray.
As you can see, this is not any of those colors. I have photographed it with
a copper part next to it, so you can see that it is not copper. The closest
I can figure is that this is chrome pink, but there is nothing chrome about it.
It is more like a pearl dark pink color.
What color do you think it is?
I appreciate your help.
Stan.
|
This mask is actually a LEGO color known as "Red Flip/Flop" and was only used
for the two Bionicle masks shown in
https://www.flickr.com/photos/126975831@N07/15123159082/
The LEGO color "Red Flip/Flop" does not have a specific color on BrickLink and
is lumped under "Copper" since there is no other color close to it.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Sep 2, 2019 13:58 | Subject: | Re: Inventory Change Request for Set 70723-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra part quantities matched the current inventory
|
Thank you. I updated the inventory to contain the alternate extra.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Sep 2, 2019 13:45 | Subject: | Re: Inventory Change Request for Set 70722-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
Yes, the extra quantities matches the current inventory.
|
Thank you. I updated the inventory to contain the alternate extra.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Sep 2, 2019 12:29 | Subject: | Re: Inventory Change Request for Set 70722-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 1)
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 1}
Comments from Submitter:
found variant during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
|
Author: | randyf | Posted: | Sep 2, 2019 12:28 | Subject: | Re: Inventory Change Request for Set 70723-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Brown Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 4)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 5)
* Change 1 Part Dark Brown 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 4}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 5}
Comments from Submitter:
found variants during part out, thanks
|
Did you have an extra pearl gold katana in your set?
Thanks,
Randy
|
|
Author: | randyf | Posted: | Sep 1, 2019 02:42 | Subject: | Re: Inventory Change Request for Set 3559-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Delete 2 Part x151 Black Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {2 to 4} Part Black x151 Rubber Band Extra Small (Square Cross Section)
Comments from Submitter:
Only two rubber bands are used in the build. However, this set came with four rubber bands *at all times* and is corroborated by the official part count on the box (cont. 41 pcs/pzs). According to the BrickLink inventory guidelines, these rubber bands are therefore considered Regular Items.
|
|
|
|
Author: | randyf | Posted: | Sep 1, 2019 02:33 | Subject: | Inventory Change Request for Set 3559-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part x151 Black Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {2 to 4} Part Black x151 Rubber Band Extra Small (Square Cross Section)
Comments from Submitter:
Only two rubber bands are used in the build. However, this set came with four rubber bands *at all times* and is corroborated by the official part count on the box (cont. 41 pcs/pzs). According to the BrickLink inventory guidelines, these rubber bands are therefore considered Regular Items.
|
|
Author: | randyf | Posted: | Sep 1, 2019 02:23 | Subject: | Re: Inventory Change Request for Set 3558-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Delete 3 Part x151 Black Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {1 to 4} Part Black x151 Rubber Band Extra Small (Square Cross Section)
Comments from Submitter:
From sealed set contents. Only one rubber band is used in the build. However, this set came with four rubber bands *at all times* and is corroborated by the official part count on the box (cont. 34 pcs/pzs). According to the BrickLink inventory guidelines, these rubber bands are therefore considered Regular Items.
|
|
|
|
Author: | randyf | Posted: | Sep 1, 2019 02:20 | Subject: | Inventory Change Request for Set 3558-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 3 Part x151 Black Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {1 to 4} Part Black x151 Rubber Band Extra Small (Square Cross Section)
Comments from Submitter:
From sealed set contents. Only one rubber band is used in the build. However, this set came with four rubber bands *at all times* and is corroborated by the official part count on the box (cont. 34 pcs/pzs). According to the BrickLink inventory guidelines, these rubber bands are therefore considered Regular Items.
|
|
Author: | randyf | Posted: | Aug 31, 2019 12:04 | Subject: | Re: Inventory Change Request for Part 4276325 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| Hi,
I have just checked the string from my set 8258 (as always: bought new, not mixed
with other sets).
Cardboard sleeve: 4276325
String: Definitely thin (medium thick string from set 6274 for comparison).
|
Thanks for the information, Jonas.
When I was looking at sets that were built from sealed set contents on brickshelf
for set 7905, *none* of the strings looked particularly thick to me in any of
the photos, either. One of them showed the cardboard sleeve was the exact same
one we are discussing. I have a strong feeling the inventory for 7905 is wrong.
Also, the image for
looks like thin string to me.
I wonder if there even is a 200cm string in medium thickness...
Definitely thin string in that set, also. See attached image.
I don't know what is going on with the rest of the inventories, but your
photo and all of the information I have pieced together is enough to not change
the inventory of this cardboard sleeve.
Cheers,
Randy
|
|
|
Author: | randyf | Posted: | Aug 31, 2019 04:28 | Subject: | Re: Inventory Change Request for Part 4276325 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| Hi
or... the inventory from set 7905 is wrong?
Not as is for now but
if this part is the correct one in the cardboard sleeve.
But don't think so...
Below picture I took years ago and this is my info:
4276325 - x77cc200 - 1x black - 1x set 7905.jpg
(in my data from own collection and part out sets, it was only found in that
set)
As you can see, it's the same picture here on BL, but someone removed the
black sides
Stefaan
|
I believe you, but why was your image of the box on
before we removed it? Had you submitted it under the wrong entry or did someone
else have your photo and upload it? Just trying to figure this out.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 31, 2019 03:49 | Subject: | Re: Inventory Change Request for Set 9641-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, liesbeth writes:
| Please make changes to the following inventory:
* Delete 1 Part 5102c24 Black Hose, Pneumatic 4mm D. 24L / 19.2cm
* Delete 1 Part 5102c24 Blue Hose, Pneumatic 4mm D. 24L / 19.2cm
* Delete 1 Part 5102c24 Light Bluish Gray Hose, Pneumatic 4mm D. 24L / 19.2cm
|
These requests will not be accepted.
This set was inventoried from "Sealed Set Contents" and confirmed from "Sealed
Set Contents". The set image also shows these parts and the LEGO replacements
parts site has all of these listed in the set. Due to all of this, I find it
highly unlikely that they were not included in the set.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 31, 2019 03:38 | Subject: | Re: Inventory Change Request for Set 7709-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, 1271moggy writes:
| Please make changes to the following inventory:
* Add 1 Part 47753pb032R Black Wedge 4 x 4 No Top Studs with Vent Pattern (Sticker) Model Right - Set 7712 (Counterpart)
* Add 1 Part 47753pb032L Black Wedge 4 x 4 No Top Studs with Vent Pattern (Sticker) Model Left - Set 7712 (Counterpart)
Comments from Submitter:
Add 1 part 47753pb032R - Black Wedge 4 x 4 No Top Studs with Vent Pattern (Sticker) Model Right - Set 7712 (Counterpart)
Add 1 part 47753pb032L - Black Wedge 4 x 4 No Top Studs with Vent Pattern (Sticker) Model Right - Set 7712 (Counterpart)
Proof - See page 25 of set instructions
|
These requests will not be accepted.
The stickers in the set you are trying to add these parts to do not match the
stickers on the parts you are trying to add. They are completely different colors,
even though the pattern is similar. You will need to add the new stickered parts
to the BrickLink catalog before they can be added to the set.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 29, 2019 17:54 | Subject: | Re: Inventory Change Request for Set 3557-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Delete 3 Part x151 Black Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {1 to 4} Part Black x151 Rubber Band Extra Small (Square Cross Section)
Comments from Submitter:
From sealed set contents. Only one rubber band is used in the build. However, this set came with four rubber bands *at all times* and is corroborated by the official part count on the box (cont. 34 pcs/pzs). According to the BrickLink inventory guidelines, these rubber bands are therefore considered Regular Items.
|
|
|
|
Author: | randyf | Posted: | Aug 29, 2019 14:02 | Subject: | Inventory Change Request for Set 3557-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 3 Part x151 Black Rubber Band Extra Small (Square Cross Section) (Extra)
* Change {1 to 4} Part Black x151 Rubber Band Extra Small (Square Cross Section)
Comments from Submitter:
From sealed set contents. Only one rubber band is used in the build. However, this set came with four rubber bands *at all times* and is corroborated by the official part count on the box (cont. 34 pcs/pzs). According to the BrickLink inventory guidelines, these rubber bands are therefore considered Regular Items.
|
|
Author: | randyf | Posted: | Aug 29, 2019 03:17 | Subject: | Re: Inventory Change Request for Set 8548-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, Kelcy writes:
| Please make changes to the following inventory:
* Delete 8 Part x88 Black Rubber Band Small (Square Cross Section)
* Delete 8 Part 32002 Dark Gray Technic, Pin 3/4
Comments from Submitter:
I checked and double checked the instructions for both of these and only 4 rubber bands are used. For the piece #32002 there are 2 dark gray and 2 light gray in each for a total of 4 dark gray and 4 light gray.
|
For the
in Dark Gray, there are eight of them used in the alternate build shown on pages
42 (4x) and 46 (4x) of the instruction book for the purple scorpion. Therefore,
the number of these is correct.
As for the rubber bands, you are correct that there are only four used in either
the main builds or the alternate build. However, this set came with eight rubber
bands *at all times* and is corroborated by the official part count on the box
(CONT. 218 PCS/PZS). According to the BrickLink inventory guidelines, these rubber
bands are therefore considered Regular Items.
Since the inventory is correct concerning all the parts in your requests, these
requests will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 29, 2019 02:15 | Subject: | Re: Inventory Change Request for Set 8365-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, Leinorbert writes:
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {46453 Technic Engine Tuneable, Block with Trapezoidal Air Scoop (for part 2133) to 46453c01 Technic Engine Tuneable, Block with Trapezoidal Air Scoop with 2 Fixed Rotatable Pins (for part 2133)}
|
Image from sealed set contents shows that this change is correct. Request accepted.
However, the inventory is still incorrect since
* | | 46452 Technic Engine Tuneable, Block with Two Round Air Scoops (for part 2133) Parts: Technic |
currently listed in the inventory also comes with fixed rotatable pins in the
set.
Cheers,
Randy
|
|
|
Author: | randyf | Posted: | Aug 29, 2019 01:44 | Subject: | Re: Inventory Change Request for Set 8455-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
| In Inventories Requests, Prins_Roy writes:
| Please make changes to the following inventory:
* Change 1 Part {Dark Gray to Black} 5102c406 Hose, Pneumatic 4mm D. 406L / 324.8cm
Comments from Submitter:
The color of the hose in the set is Black (11) but in the inventory it says Dark Gray (10).
|
I don't know exactly what color it is, but it doesn't look like Dark
Gray or Black in any sets that I have looked at that were built from sealed
sets. The color is sort of a very dark charcoal gray. I have never seen anything
quite like it in LEGO colors, but I don't have any sets with a pneumatic
system. In any case, I believe the color is much closer to Black than Dark Gray
so will accept this request.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 26, 2019 18:39 | Subject: | Inventory Change Request for Set 4875-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Trans-Dark Pink to Trans-Pink} clikits080 Clikits Icon Accent, Plastic Heart 3 3/8 x 3 3/8 with Raised Border
* Change 1 Part {Trans-Dark Pink to Trans-Pink} clikits042 Clikits Ring, Narrow Band with Hole in Top, Fits Child's Finger
* Change 1 Part {Trans-Light Blue to Trans-Medium Blue} 47912 Clikits Bracelet, Bangle with Hole, Fits Child's Wrist
* Change 1 Part {Trans-Light Blue to Trans-Medium Blue} clikits081 Clikits Icon Accent, Plastic Flower 10 Petals 3 5/8 x 3 5/8 with Raised Border
* Change 1 Part {Trans-Purple to Trans-Light Purple} 47912 Clikits Bracelet, Bangle with Hole, Fits Child's Wrist
Comments from Submitter:
From sealed set contents.
|
|
Author: | randyf | Posted: | Aug 24, 2019 12:07 | Subject: | Re: Inventory Change Request for Set 7641-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| And there is another problem with this inventory: We have two alternate parts
which both have an extra part (paddle and claw). They are listed in different
ways at the moment and I don't know how to fix that. At least it is not possible
to add parts with a match ID to the extra items section (the match ID always
disappears).
|
This is a problem that needs to be fixed manually by us behind the scenes. If
you ever run into another situation like this, just let us know in the forum
and we will take care of it.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 24, 2019 11:52 | Subject: | Re: Inventory Change Request for Set 31073-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| Thank you!
The inventory has been updated.
Cheers,
Randy
In Inventories Requests, ChemBricks writes:
| There is no Bottom Groove like shown for 44301b. However the stud underneath
is hollow instead of filled like the picture for 44301b suggests.
In Inventories Requests, randyf writes:
| In Inventories Requests, ChemBricks writes:
| Please make changes to the following inventory:
* Change 4 Part Yellow {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Parts List has Yellow Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) 44302 listed. Comparing the set purchased at a local store with the pictures provided under 44302a or 44302b, I can determine the part to be 44302a.
|
Could you also check on the
* | | 44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) Parts: Hinge |
in Dark Bluish Gray in the inventory?
Thanks,
Randy
|
|
|
|
Author: | randyf | Posted: | Aug 22, 2019 13:51 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 40 times | Topic: | Inventories | |
| In Inventories, axaday writes:
| The journey is the destination?
|
|
Author: | randyf | Posted: | Aug 22, 2019 12:41 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 42 times | Topic: | Inventories | |
| In Inventories, axaday writes:
| In Inventories, randyf writes:
| In Inventories, axaday writes:
| So should I start uploading these? I have quite a few.
|
Yes. You can go ahead.
|
Do we have any way of looking for which ones we lack? At this point I realize
they are EVERYWHERE, but will we be able to tell when it is done?
|
I don't think we will know when it is done or really care if it ever is.
We just want to get as much information into the database as possible and have
a resource for all those people who want to know what comes in those little cardboard
sleeves without having to open them to sell.
Cheers,
Randy
|
Author: | randyf | Posted: | Aug 22, 2019 08:25 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 46 times | Topic: | Inventories | |
| In Inventories, axaday writes:
| So should I start uploading these? I have quite a few.
|
Yes. You can go ahead.
|
Author: | randyf | Posted: | Aug 22, 2019 08:21 | Subject: | Re: Inventory Change Request for Set 7903-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turribrick writes:
| About setting the match ID to 0 to clear it: is that documented or did I just
miss that? If not, maybe it should...
|
Another nice catch!
I looked over the "Inventory Change Request" help page, and it seems that there
is no mention of this at all. And there really should be. I will go ahead and
update that help page sometime today.
Thanks for your help!
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 21, 2019 22:13 | Subject: | Re: Inventory Change Request for Set 7903-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turribrick writes:
| Please make changes to the following inventory:
* Change 1 Part White 6153b Wedge 6 x 4 Cutout with Stud Notches {match ID 3 to 0}
Comments from Submitter:
The match ID should be removed as there is no longer an alternate for this part in the inventory, but I don’t know how to do that, since leaving it blank means “no change”...
So I set it to 0 in this request.
|
Nice catch! That error has been in the inventory for almost 11 years!
Setting the Match ID to zero was the exact thing you needed to do, so you handled
this request perfectly.
Thanks for contributing!
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 21, 2019 18:58 | Subject: | Re: Inventory Change Request for Set 31073-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, ChemBricks writes:
| Please make changes to the following inventory:
* Change 4 Part Yellow {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Parts List has Yellow Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) 44302 listed. Comparing the set purchased at a local store with the pictures provided under 44302a or 44302b, I can determine the part to be 44302a.
|
Could you also check on the
* | | 44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) Parts: Hinge |
in Dark Bluish Gray in the inventory?
Thanks,
Randy
|
|
Author: | randyf | Posted: | Aug 21, 2019 18:51 | Subject: | Re: Inventory Change Request for Part 4276325 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Change 1 Part Black {x77ac200 String, Cord Thin 200cm to x77cc200 String, Cord Medium Thickness 200cm}
Comments from Submitter:
found in 7905 (source: my data)
|
Maybe your data is wrong? This image was taken directly from the
entry in the catalog. That is why the current image is no longer available for
that part.
But, I definitely don't know if that image was always correct for that part,
either. It will be looked into.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 21, 2019 18:48 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 55 times | Topic: | Inventories | |
| In Inventories, yorbrick writes:
| It is probably a stupid question, but does BL have a test server where such changes
can be tried out without affecting how regular users use the site or allowing
regular users to snoop or interrupt the testing of ideas?
|
It is most definitely *not* a stupid question. If I was king around here, there
would be a place we could test this stuff without affecting the live data and
have sellers/buyers give feedback. Unfortunately, we don't have that. Maybe
we will someday...
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 21, 2019 13:41 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 87 times | Topic: | Inventories | |
| In Inventories, BasKrie writes:
| In Inventories, randyf writes:
| Wow, people will throw an instant tirade about any new idea we try out. It is
no wonder that the corporate BrickLink employees and developers don't want
to try anything new, either. Everything that is tried receives just whinging
and moaning from the user base. I think I now have a good idea about what drove
Jaclyn away from the site.
Cheers,
Randy
|
Hi Randy,
The problem is that it was not just an idea you were trying out.
|
Actually, yes it was. We were trying it out for an entire total of two days.
| It started to be implemented without notification or explanation and caused issues
for sellers and buyers.
|
We were implementing changes so that the user base would have something to comment
on when the idea was communicated to the user base in a couple of days. That
got sidetracked because someone noticed they were being added to the catalog
after one day. As I said, not a big deal, because we got the feedback we were
looking for earlier than planned and have made significant changes already. Also,
it had yet to cause any problems for anyone. The people that were testing the
idea came up with great constructive feedback on what was happening behind the
scenes, and that feedback was very welcomed (especially from member yorbrick).
| A user had to find out and made a comment about it.
|
A user found out while the idea was being tested in the first two days. An announcement
was planned for today or tomorrow once the initial work was done. So, a total
of maybe four days from initial work to completion of testing work to communicating
with the user base for feedback. A pretty short timetable that was interrupted
by a user that was "snooping" around.
| Most of the 'whining and moaning' from the user base, not just to this
'idea' but more in general, is about not communicating to said user base.
|
Did I mention the communication part was coming within a day or two? And am I
or Marek or Russell not communicating now? Do not confuse the BrickLink corporate
lack of communication with the volunteer admins who communicate very regularly.
Just have a search through the forums and you will see that the volunteer admins
are very present and remain accountable to the users here.
| Time and time again the user base is confronted with changes that are not always
understood and/or apreciated. In some cases the user base does not even understand
why something needs to be changed, beacause it is not allways clear what the
benefit of it is.
|
For this, it would have all been explained in our announcement message that did
not get a chance to materialize due to someone interrupting the process.
| And as Russel said, it gives a problem in the part-out system which will have
to be fixed, someday (if ever), and that also is a point for concern.
|
Yeah, we heard that. That is why things have already been rolled back due to
the feedback. I took almost three hours of my personal time last night doing
this by myself ASAP. See, us volunteer admins can get stuff done quickly, unlike
the corporate employees. We also take the feedback we get seriously and try to
work with everyone as best we can as we try to add new things to the catalog.
| Many things on Bricklink have been broken and a fix is never heard of. So introducing
a new idea while older broken things don't get fixed is a very big issue
for the user base.
|
The volunteer admins have no choice but to move forward with ideas that are needed
for the catalog. We have the time and energy to try and make positive changes
for the user base. The corporate side does not. Eventually, the corporate side
will catch up (from things I have started to hear), but us volunteers have no
say and no way to do what is necessary to the code. We work in the systems we
have.
| And I know that you can't fix the broken things, but do understand that for
me (as a user) it is very annoying to see.
|
I am sorry to hear you say that. I am also annoyed at the lack of support that
I and the other volunteer admins get from corporate.
| Russel stated that is was good for the future of Bricklink, but there are so
many things, that if ain't fixed are quite damaging for the Bricklink future
that it's sometimes better not to introduce something new before something
old is working in good order.
|
I agree, but once again, the volunteer admins have the time and energy to try
to do things that help the user base even if the corporate side does not keep
up. We will keep trying new ideas, also, as the Catalog Roadmap lays out:
https://www.bricklink.com/help.asp?helpID=2476
Remember, this isn't a developer roadmap. It is a roadmap for things that
the volunteer admins can do and solve.
Thanks for your comments.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 20, 2019 15:52 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 65 times | Topic: | Inventories | |
| In Inventories, mwright5 writes:
| In Inventories, yorbrick writes:
| | Wow! Just seeing that cardboard cape boxes have been added to the catalog.
I usually would prefer to refrain from making a derogatory comment on something
so trivial, but I have to say, that is a new kind of stupid. Give me a break.
|
It is truly bizarre. There is this sleeve, for example:
which contains two minifigure capes. However, this sleeve which is called "Cardboard
Sleeve for Set 70837" doesn't actually appear in set 70837 since it contains
minifigure parts, which are listed with the minifigures. So we now have an entry
for a part that is not included in any sets and so is unlikely to ever be listed
in that way.
Then we have the same where the sleeves contain a single cape, for example:
Again it doesn't belong to any sets despite the name, since it belongs to
a minifigure.
It seems to be a case of making a rule then insisting on sticking to it for all
parts and sets, no matter how stupid the application of the rule is.
|
I've got a great idea! To follow suit, lets start cataloging and selling
the numbered plastic bags that the pieces come in in each box. Actually, why
stop there, lets catalog the empty collectible minifig poly bags too. After
all that's technically LEGO is it not? Give me a break!!!!!!!!!
|
You do realize these catalog entries are for the sealed cardboard sleeves with
contents in them, right? Because I don't think you do...
- Randy
|
|
Author: | randyf | Posted: | Aug 20, 2019 14:38 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 48 times | Topic: | Inventories | |
| In Inventories, yorbrick writes:
| In Inventories, randyf writes:
| In Inventories, yorbrick writes:
| But what happens when more sets come along that use this sleeve? They need to
be added to the part description. Why not just call it "Cardboard Sleeve 4580966"
removing the set names?
|
Thank you for this suggestion. We were trying to come up with a way to not have
to repeat information in the names, but I think this idea is the easiest solution.
We will have to come up with another way to track what sets these come in in
the meantime. I am guessing the additional notes for the sleeves will probably
be the way to go.
Cheers,
Randy
|
If the actual parts in the sleeve are listed in the inventory and the (sealed)
sleeves are listed as an alternate for each of the sets they are in, won't
that information already be stored in the catalogue in a meaningful way? Then
someone can look up the number on the sleeve and search for it. It won't
be in any sets as a regular part but will be listed as an alternate for all the
sets it appears in. That way, the set numbers need not be kept in the title or
as additional notes.
Or have I totally misunderstood how alternates work?
|
Yes, you have misunderstood alternates. Alternate parts are parts that are completely
substituted for other parts in a set. These sleeves come in every set they came
in.
As Russell said, we will need to wait for new functionality before we can ever
add these to inventories in a meaningful way that makes it easy for sellers to
part them.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 20, 2019 13:40 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 42 times | Topic: | Inventories | |
| In Inventories, yorbrick writes:
| But what happens when more sets come along that use this sleeve? They need to
be added to the part description. Why not just call it "Cardboard Sleeve 4580966"
removing the set names?
|
Thank you for this suggestion. We were trying to come up with a way to not have
to repeat information in the names, but I think this idea is the easiest solution.
We will have to come up with another way to track what sets these come in in
the meantime. I am guessing the additional notes for the sleeves will probably
be the way to go.
Cheers,
Randy
|
Author: | randyf | Posted: | Aug 20, 2019 13:35 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 46 times | Topic: | Inventories | |
| In Inventories, SezaR writes:
In the future, yes.
|
|
Author: | randyf | Posted: | Aug 20, 2019 13:31 | Subject: | Re: Cardboard sleeves in inventories | Viewed: | 68 times | Topic: | Inventories | |
| In Inventories, Turez writes:
Wow, people will throw an instant tirade about any new idea we try out. It is
no wonder that the corporate BrickLink employees and developers don't want
to try anything new, either. Everything that is tried receives just whinging
and moaning from the user base. I think I now have a good idea about what drove
Jaclyn away from the site.
In any case, we have heard all of the feedback and will be reversing course on
the inventories. We had planned to make an announcement in a few days concerning
this to ask for feedback on what had been done, but we wanted stuff in place
for users to look at. So this thread was not a complete loss to us, but you did
jump the gun on us, Jonas.
Please bear with us as we work out the kinks.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 17, 2019 15:20 | Subject: | Re: Inventory Change Request for Set 5836-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, missalyss writes:
| Please make changes to the following inventory:
* Change 1 Part {Medium Orange to Yellow} {x248 Belville Cloth Blanket 4 x 5 to belvblank04 Belville Cloth Blanket 4 x 7}
|
This request was partially correct in the fact that the blanket did indeed need
to be the larger size based on my findings in a sealed set. However, the color
of the blanket is definitely Medium Orange and not Yellow. I have already corrected
the inventory based on my findings, so this request will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 17, 2019 15:15 | Subject: | Inventory Change Request for Set 5836-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Medium Orange {x248 Belville Cloth Blanket 4 x 5 to BelvBlank04 Belville Cloth Blanket 3 1/2 x 6 3/4}
Comments from Submitter:
From sealed set contents.
|
|
Author: | randyf | Posted: | Aug 16, 2019 18:10 | Subject: | Re: Inventory Change Request for Set 60229-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
We make sure that all parts are the correct variants with the inventory submitters
before approving the inventories, so this part did indeed come in the set.
I noticed that all the videos you posted are from users in other parts of the
world rather than the North American market. 2436b is still being used in the
North American market, and the user who inventoried this set is from North America.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 16, 2019 18:02 | Subject: | Re: "White" color of part 93568pb001 | Viewed: | 41 times | Topic: | Catalog | |
| In Catalog, normann1974 writes:
| According to BL, the color of the topping of is "white". Is this
just a loose color description or was it meant to indicate the correct color?
Because it's not white. It's more like Very Light Bluish Gray. Please
see attached picture of part with white, VLBG (shield), LBG and LG.
/Jan
|
It is white printed on dark plastic, so some of the plastic color is transmitted
through the paint, making it look less than white. However, the paint is definitely
white.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 15, 2019 00:34 | Subject: | Re: inventory "pending approval" | Viewed: | 41 times | Topic: | Catalog | |
| In Catalog, nerdsforprez writes:
| I did a search, but couldn't find what I was looking for.
How long does it typically take to approve an inventory? 42099 has been in "pending
status" for several days now.
- Trevor
|
The inventory has not been completed by the submitter of it. When it is complete,
the inventory will most likely be approved in one to two days by either myself
or Paul.
Cheers,
Randy
|
Author: | randyf | Posted: | Aug 12, 2019 11:16 | Subject: | Re: Elements Exclusive to BaM | Viewed: | 45 times | Topic: | Catalog | |
| In Catalog, zzed writes:
| Well now I want the wizard hat with hair.
|
| Isn't the black wizard hat # 17349 from the Rise of Voldemort set?
|
Yes.
| I can't tell if the one in your photo is black.
|
It looks like Dark Blue with stars on it.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 11, 2019 16:37 | Subject: | Re: Inventory Change Request for Set 40253-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, begorny writes:
| Please make changes to the following inventory:
* Delete 1 Part 4733 White Brick, Modified 1 x 1 with Studs on 4 Sides (Extra)
Comments from Submitter:
Extra Item not included in sealed box.
|
From the Additional Information About Extra Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562#extraItems
Removing or Changing Extra Items - Extra parts can vary depending on when
and where a set was manufactured, meaning that some new sets may include them
and others may not. The quantity of these extra parts can also vary. Extra parts
are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error.
This extra part was found in some sealed copies of this set so it will not be
removed and this request will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 9, 2019 18:24 | Subject: | Re: Inventory Change Request for Set 8678-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, SimUmp writes:
| Please make changes to the following inventory:
* Change 6 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
|
No reply for more information from submitter. Request not approved.
Randy
|
|
Author: | randyf | Posted: | Aug 9, 2019 18:24 | Subject: | Re: Inventory Change Request for Set 8678-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, SimUmp writes:
| Please make changes to the following inventory:
* Change 1 Part White {4623 Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 6mm) to 88072 Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 5mm)}
|
No reply for more information from submitter. Request not approved.
Randy
|
Author: | randyf | Posted: | Aug 7, 2019 22:46 | Subject: | Re: Inventory Change Request for Set 7644-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, jleland writes:
| Please make changes to the following inventory:
* Add 1 Part 3062b Trans-Neon Green Brick, Round 1 x 1 Open Stud
|
This is part of minifigure
which is already in the inventory.
The request to add it again will not be accepted.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Aug 5, 2019 22:01 | Subject: | Re: Inventory Change Request for Set 7557-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Trans-Purple to Trans-Light Purple} clikits099 Clikits Icon, Butterfly 2 x 2 with Hole
Comments from Submitter:
This is easy to miss if you are not comparing to another thick icon with hole. A pic will be attached.
|
|
The set is right in front of me. I just didn't have a chance to go through
it yet. I concur with your assessment.
|
|
Author: | randyf | Posted: | Aug 5, 2019 13:13 | Subject: | Re: sh517 wings color? | Viewed: | 26 times | Topic: | Colors | |
| In Colors, mmookk61 writes:
| I have recently added a couple of minifigures(sh517) to my store and have a question
on light trans blue versus trans blue wings. After going back and forth between
the two pictures of the minifig with wings in the Bricklink catalog I believe
these are the trans light blue ones which makes the minifig the sh517a version.
Please have a look at the photos along side 1X2 trans light blue plates to see
if you agree or have input.
My camera is not great at close ups so hopes these are discernible.
Thanks much
|
They look like Trans-Light Blue to me. However, if you want to know for sure,
get a black light. Trans-Medium Blue fluoresces *very* strongly under black light.
Cheers,
Randy
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|