Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Minifig_Central | Posted: | Aug 18, 2019 04:49 | Subject: | Specific Lots -> Specific Countries | Viewed: | 43 times | Topic: | Inventories | Status: | Open | |
| Hi,
Just wondering if you're able to make specific lots only available to specific
countries?
I'm looking to sell some sets but I want to set them to UK only (if you can
do this then how?)
Thank you in advance for any help!
|
|
Author: | sircueball | Posted: | Aug 14, 2019 20:21 | Subject: | Inventory for set 3301-1 wrong color forpart? | Viewed: | 48 times | Topic: | Inventories | Status: | Open | |
| I little while ago I parted out and just sold
* | | 41169c01 (Inv) Duplo Winch Drum Narrow with White String and Black Thin Hook Fixed with Stud Holder Parts: DUPLO |
I just got a message from the buyer that they received Pearl Light Gray and not
Flat Silver.
I also happen to have this completed set currently listed so I checked that part
in that one. It looks like Pearl Light Gray also.
Is there someone that can verify it truly is Flat Silver in this set? I got these
in a big used lot so I can't say for sure.
At the very least just be sure to be check the colors before just parting out
a set. I unfortunately didn't.
Thanks
|
|
Author: | JayEll3 | Posted: | Aug 12, 2019 19:37 | Subject: | What set does this piece go to??? | Viewed: | 104 times | Topic: | Inventories | Status: | Open | |
| I have this piece and I don’t know what set it belongs to. I don’t even know
how to search for it. Any help would be appreciated!!
|
|
|
Author: | normann1974 | Posted: | Aug 10, 2019 08:43 | Subject: | Help with inventory | Viewed: | 89 times | Topic: | Inventories | Status: | Open | |
| Hello
After having been on BL for a couple of years, both as a buyer and seller and
submitter to the catalog, I wanted to take up the challenge of making an inventory
for a set, and I chose set because I just bought it. At this point,
I have only submitted the sticker sheet to the catalog, and I'm stuck with
10 parts that seem to be new (their PCCs don't exist on BrickLink and I can't
find them through search). I have a few questions for the upcoming work.
1) Should I leave it to a professional to do all this work? I'm thinking
that I can't provide professional pictures of the new parts and I can't
name the remaining parts or supply weight for them.
2) If the answer to 1) is "no", could someone please help me identify the remaining
10 parts or provide me with good names for the parts so I can add them to the
catalog? What do I do with the weight of the parts? I don't have a weight
with the precision needed.
Attached are pictures of the 10 new parts.
/Jan
|
|
|
Author: | Jacerish | Posted: | Aug 3, 2019 08:56 | Subject: | Pending inventory for set 75936 T.rex rampage | Viewed: | 54 times | Topic: | Inventories | Status: | Open | |
| Pending inventory for set 75936 T.rex rampage
This set been out for a while now . Is there time scale how long it might take
.
Thank you for take in time to read this
Mark
|
Author: | InqMikhailovich | Posted: | Jul 31, 2019 13:46 | Subject: | 76130 Stark Jet and the Dr... No Inventory | Viewed: | 65 times | Topic: | Inventories | Status: | Open | |
| The Spider-Man: Far From Home set 76130 Stark Jet and the Drone Attack currently
has "N/A" listed as its inventory, while all three other Spider-Man: Far From
Home sets have inventories available. Is there a reason for this?
|
|
Author: | brickbox83 | Posted: | Jul 31, 2019 07:50 | Subject: | How to compare parts lists with my inventory | Viewed: | 37 times | Topic: | Inventories | Status: | Open | |
| Hey,
Anyone know how to compare a parts list of a set (that I have previously parted
out) with my current inventory of parts in that set to see what parts have already
sold.
Thanks.
Brickbox83
|
Author: | hockeyweasel | Posted: | Jul 29, 2019 15:35 | Subject: | Pending Inventory for 75948-1 back to N/A | Viewed: | 56 times | Topic: | Inventories | Status: | Open | |
| The inventory for the Hogwarts Clock Tower 75948-1 was 'In Progress'
and then 'Pending Approval' about a week later, and within a couple of
days it went back to N/A. What happened?
|
|
Author: | DrFrag | Posted: | Jul 24, 2019 08:08 | Subject: | Anomalous extra part in 31056-1 | Viewed: | 85 times | Topic: | Inventories | Status: | Open | |
| I just parted out a single sealed retail box of 31056-1 and all the parts were
correct, except it came with an extra Dark Bluish Gray Technic, Brick 1 x 12
with Holes. This is the largest part in the entire set and mine had 3 instead
of 2. The instructions indicate only 2 are needed. All 3 were loose in the
cardboard box and not in the sealed plastic bags.
I'm hesitant to submit an inventory change request because this set came
out a couple of years ago so I expect its database entry is settled, and I've
never seen an extra part this large before.
Should I just chalk this up as a one-off oddity?
|
|
Author: | GIT_Some_Bricks | Posted: | Jul 23, 2019 12:07 | Subject: | New snake 38801 incorrect color | Viewed: | 80 times | Topic: | Inventories | Status: | Open | |
| I believe the new snake part 38801 from set 71043 has been incorrectly logged
as Sand Green when it is actually Olive Green. At least the one I have (in the
pic) is clearly olive green. Can anyone else verify?
|
|
Author: | Ossdorp | Posted: | Jul 15, 2019 07:48 | Subject: | 6021 Wrong inventory | Viewed: | 107 times | Topic: | Inventories | Status: | Open | |
| Hi,
There are no plumes are in this set (6021). Only with the minifigures.
I tried to fill in an inventory request, but I have gotten an error page.
Ciao!
Tim
|
Author: | BRICKcycling | Posted: | Jul 9, 2019 09:02 | Subject: | What sets could I build from my inventory | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
| Hey guys,
Is there a listing option here to check which complete sets could I be able to
build using the parts in my inventory? If the answer is yes, can I exclude the
parts from my inventory that belong to a complete set I wouldn't want to
take apart for the purpose? I have a crazy amount of spare parts, I'd like
to check wether they could add up to some nice, complete sets
|
Author: | mattallica | Posted: | Jul 4, 2019 18:22 | Subject: | inventory question | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
| recently i have been buying some Duplo figures for my son and have noted that
figures like Batman that have a cape are inventoried without them meaning to
get a complete figure you must buy the cape separately.
why is this? minifigs come with their capes?
|
Author: | Sango85 | Posted: | Jul 1, 2019 04:53 | Subject: | 10205 : Parts to be removed from Inventory | Viewed: | 122 times | Topic: | Inventories | Status: | Open | |
| Hello,
I check my locomotive 10205 with Bricklink Inventory and I found differences...
I bought a new loco, and found the same differences...
I think there are errors into the Bricklink Inventory.
Please find the list of the issues.
Best regards,
Julien
|
|
Author: | BEEKUZZ | Posted: | Jun 27, 2019 14:31 | Subject: | Toy Story Duplo 10894 parts not in inventory | Viewed: | 46 times | Topic: | Inventories | Status: | Open | |
| We need the Toy Story Train 10894 inventoried so we can part out. How is this
done? Can I do it myself?
|
Author: | estaswick | Posted: | Jun 25, 2019 15:22 | Subject: | Rebrickable for minifigs | Viewed: | 60 times | Topic: | Inventories | Status: | Open | |
| A while back (a year or two) someone posted a link to software that would look
at your inventory of figure parts and tell you what official minifigs you could
make. I didn't save the link and am wishing I had it now. Any help?
|
Author: | The_Brick_Freak | Posted: | Jun 23, 2019 06:30 | Subject: | Tutorial | Viewed: | 115 times | Topic: | Inventories | Status: | Open | |
| Hey peoples! i would really like to be able to contribute by adding New set inventories
into bricklink but i am worried i will make a mistake.
Is their a tutorial on how to do it correctly with a run down on how everything
works? If so, please point me to the video or link. If not is this something
a more experienced person might be interested in doing to teach us?
Cheers
James
|
Author: | POPS_BLOCK_SHOP | Posted: | Jun 22, 2019 08:00 | Subject: | Added 10,000 Parts using my iPHONE YIKES! | Viewed: | 80 times | Topic: | Inventories | Status: | Open | |
| This is by far the biggest addition to our bricklink store and I made a Video
Diary about it! If you have 5 minutes I hope you find it helpful and entertaining!
https://youtu.be/oKEMbC75KWA
|
Author: | Rickaroo72 | Posted: | Jun 21, 2019 12:58 | Subject: | search my inventory | Viewed: | 43 times | Topic: | Inventories | Status: | Open | |
| I don't have a public store. But, is there a way that I can upload parts
into my store and then use that in order to search my inventory for my want list
items?
|
Author: | BrickCastle60 | Posted: | Jun 20, 2019 03:39 | Subject: | Inventory not excist of 75890, 70673... | Viewed: | 52 times | Topic: | Inventories | Status: | Open | |
| Hi,
when do you want to add the inventories from the sets
75890 listed in February 2019
70673 listed in May 2019
and other sets?
We wanted to put the parts in our store...
Thanks, Tanja
|
Author: | StoreToys4Boys | Posted: | Jun 15, 2019 17:27 | Subject: | Inventory Pending Approval (?) Toy Story: 4 | Viewed: | 49 times | Topic: | Inventories | Status: | Open | |
| Been waiting for Inventory of these Toy Story 4 .
Can't part out since inventory still not done.
Sets available since end of april...
No part to sell,no money coming in for me or Bricklink.
|
Author: | The_Brick_Freak | Posted: | Jun 12, 2019 21:34 | Subject: | 70839 | Viewed: | 84 times | Topic: | Inventories | Status: | Open | |
| Any idea when 70839 The Rexcelsior will be inventoried? been keeping an eye on
this one for a while, not sure if anyone had plans to get it done.
Thanks
|
|
Author: | Turez | Posted: | Jun 11, 2019 08:41 | Subject: | Part 2739b in sets from 2012-2014 | Viewed: | 55 times | Topic: | Inventories | Status: | Open | |
| Hello everybody,
before I (maybe) do some proper requests, I'd like to clarify the following
issue regarding part 2739a/2739b in black.
Set 8110 came with 2739b in August 2011. That is correct: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5134871
In November 2011, 2739a was added as alternate. That is correct, too: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5256458
According to the catalog, five sets from 2012-2014 still had 2739b. I think that's
wrong because...
- I tried to find images or videos showing 2739b, but didn't find a single
one.
- All those sets were inventoried by the same person and always with Source:
Parts List.
- The following sets from 2012 and 2013 have 2739a as regular and these sets
were inventoried with Source: Sealed Set Contents.
Images of new sets with 2739a:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5549146
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5583833
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5706003
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5886402
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6026821
Summary: I think 2739b never appeared in any set from 2012 and later, so I suggest
to delete it from the inventories of 9398, 9396, 9393, 42005 and 42021.
Regards,
Jonas
|
|
Author: | ThunderBricks | Posted: | Jun 9, 2019 15:10 | Subject: | Lost Remarks and inventories after Bricksync | Viewed: | 62 times | Topic: | Inventories | Status: | Open | |
| Hello,
I just restarted Bricksync, the synchronization took place but to my surprise,
it was reversed. All the changes made over the last two months via Bricklink
have disappeared and Bricksync has taken inventory of Brickowl as a reference.
I end up with a HUGE inventory problem. That never happened to me before ....
Usually when I run bricksync, it does sync commands and mate those of Bricklink
and Brickowl. He then uses Bricklink as a reference to update the changes on
Brickowl and not the other way around?
Is there a way back on Bricksync?
If you had a solution to this problem, I would be extremely grateful.
Lancelot (France)
|
|
Author: | WhiteVanMan | Posted: | Jun 2, 2019 12:13 | Subject: | Basic MUJI set | Viewed: | 101 times | Topic: | Inventories | Status: | Open | |
| Hi all.
I managed to pick up one of these sets today, and I remember seeing an article
on-line about how this would combine the playability of the LEGO parts with the
Japanese love of working with paper, so I snaffled it.
Now, looking through the contents, I note that the original submitter did NOT
include the paper sheets, nor is there a picture of the instruction sheet/booklet
Would it really be in the interests of the catalogue to include this via the
inventory?
There are extra elements as well, which I will add shortly
I'm just concerned about the paper elements.
There are 8 different designs to be built, and the first design had been cut
out (badly), and, to my surprise, a purposely made hole puncher had been made
for use with this line, but wasn't included, so an ordinary one had been
used, which shows, as the holes are not in the right places....
Can the Cat admin(s) chime in over this?
Thanks in advance!
Paul
|
|
Author: | jameso321xyz | Posted: | May 27, 2019 23:36 | Subject: | Identify set number from only three parts | Viewed: | 80 times | Topic: | Inventories | Status: | Open | |
| I had a hundred or so parts bags that became a bit tedious to identify where
they were from although not impossible, but I was thinking grind a database against
them.
tldr
used the rebrickable public csv files in MS Access to create a crude Query where
given three parts and their specific color can more often than not narrow down
set origin or narrow to 2 or 3
I am not a database expert, I am a novice, but I work with consumer level computer
consulting for small businesses for 20 year etc.
I dont know how to serve it up on the Internet, but I am looking.
I have not written the front end to it because I dont know how yet (should be
easy)
I just thought this might be useful to other people in some capacity
Thanks for reading
|
|
|
Author: | superca | Posted: | May 27, 2019 12:41 | Subject: | 41005 Heartlake High - Why a soccer ball? | Viewed: | 94 times | Topic: | Inventories | Status: | Open | |
| Inventory for 41005 Heartlake High contains only a plain soccer ball x45, but
this set includes a basketball hoop. Did Lego intentionally change the ball
type for this set, or is this possibly an inventory error and the part should
be a plain basketball 43702.
|
Author: | Broodyfour | Posted: | May 21, 2019 06:57 | Subject: | wanted list with the help of my store room | Viewed: | 38 times | Topic: | Inventories | Status: | Open | |
| I thought that when I make a wanted list of things I wish to buy that any items
already in my store's stockroom that appear on this new wanted list would
show up as a quantity I have already in-stock? I see this feature on my lists
but the spot is always left blank even when i know I have some in my stockroom......Is
there a setting I may have wrong or not turned on?
|
Author: | legomario295 | Posted: | May 19, 2019 20:37 | Subject: | Part out | Viewed: | 82 times | Topic: | Inventories | Status: | Open | |
| Hi,
Anyone noticed that when parting out some sets,
that the quantity listed my differ then what is in the box?
I'm not talking about extra parts that Lego will put in.
For example in set 10704, there is 2 black antenna,
but when entering the set in bricklink, it display quantity of 3.
And there is more example like that in the same set.
|
Author: | Erik17 | Posted: | May 8, 2019 00:01 | Subject: | Unklarer Button | Viewed: | 52 times | Topic: | Inventories | Status: | Open | |
| Hallo in die Runde
Was bezwecke ich mit diesem Button ?
|
|
Author: | jesuguty | Posted: | May 7, 2019 16:29 | Subject: | Car Workshop | Viewed: | 82 times | Topic: | Inventories | Status: | Open | |
| I need built elements for Car Workshop, oil change, car elevator, barrels,...
Help please
Thanks
|
Author: | jesuguty | Posted: | May 7, 2019 09:08 | Subject: | LEGO taller | Viewed: | 107 times | Topic: | Inventories | Status: | Open | |
| I need built element for taller, changed oil, elevator, tonnel,...
Help.please
Thanks
|
Author: | stephannie | Posted: | May 5, 2019 12:15 | Subject: | nb of 45677 red pieces in 4883 creator set | Viewed: | 49 times | Topic: | Inventories | Status: | Open | |
| hello !
in the 4883 "gear grinders" creator set, 4 red pieces ref 45677 are needed on
the paper instruction (see my photo). And 5 are needed on the Bricklink Inventory.
As it is a creator, with different building options, the exact needed number
is not easy to know. All i know is that 4 of these red pieces are enough to build
each of the suggested buiding options in the instruction. But separately, one
after the other. I don't know if TLG designed this set as being able to build
several "gear grinders" at the same time ? ... Another member owns this set ?
Good sunday to all of you !!
Stephannie
|
|
|
Author: | Bitsnpieces | Posted: | Apr 29, 2019 16:38 | Subject: | Searching my inventory | Viewed: | 44 times | Topic: | Inventories | Status: | Open | |
| Hello!
This might be a stupid question, but how can I search my inventory for parts
that are marked as stockroom items, but has a greater quantity than zero? There
has to be an easier way than going manually through all 30 pages.
-Sebastian
|
|
Author: | AlfaBeO | Posted: | Apr 25, 2019 13:56 | Subject: | Missing parts in set 41068 | Viewed: | 90 times | Topic: | Inventories | Status: | Open | |
| While looking up parts in a used parts lot, I found a couple of stickered round
tiles that aren't in the database. By checking the stickers sheets for sets
containing the tiles in question, I found a match in set 41068 Arendelle Castle
Celebration. And comparing the sticker sheet with the inventory list for the
set, you can see that there are more pieces missing under "Counter parts". Unfortunately
I only have one of them, sticker number 13 that goes on reddish brown 2x2 round
tiles (part 14769).
First time I encounter this problem so I have no idea about how to add it. Thought
I'd leave it to the professionals Just let me know what more I can contribute
with.
|
|
|
Author: | Bendix | Posted: | Apr 24, 2019 11:03 | Subject: | Soccer FC Bayern Promo Editions | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
| Just got 2 original and sealed sticker sheets of
Shoot 'N Save (FC Bayern Promo Edition)
Item No: 3422-2
and
Championship Challenge II - FC Bayern Promo Edition
Item No: 3420-2
The same as inventoried.
Looking at the counterparts (minifigs) of 3422-2 - their stickers are different
and can`t be original...
|
|
Author: | novabrick | Posted: | Apr 24, 2019 03:24 | Subject: | Transclear BBall Backboard Set 3440-1 | Viewed: | 49 times | Topic: | Inventories | Status: | Open | |
| Hello.
Is this trans-clear part: really part of Because I have
one of this bricks but with the Backboard pattern on both sides.
It would make sense to me to have it on both sides in this set since it is designed
to play against each other and otherwise one would have to aim at a blank board.
Anyway I think the inventory should be updated and a new part be added or at
least a note added to the brick and the set that it comes in different versions.
Regards
Christian
novabrick-team
|
|
Author: | Proprietor | Posted: | Apr 22, 2019 17:21 | Subject: | A rogue Rogue? CMF COL16-11 | Viewed: | 127 times | Topic: | Inventories | Status: | Open | |
| Going through some old sealed CMF pouches and identifying them by feel (I'm
100% other than the DFB soccer players), and I believe I've found a Rogue
from series 16 with 2 heads and no headgear:
This is easy to find:
as is this:
But I'm feeling 2 heads and no cowl.
I've felt countless CMF packets and this is the first mispack that I'm
certain I've found. Has anyone else found mis-packed CMF packets and if so,
how often?
And the ultimate question, of course, is there a market for this unopened?
Thanks!
EZ
|
|
Author: | Brick_a_mind | Posted: | Apr 22, 2019 12:02 | Subject: | Random Stockroom Items | Viewed: | 82 times | Topic: | Inventories | Status: | Open | |
| Hi everyone,
I was wondering if anyone could tell me why random items show up as stockroom
items in my inventory. I have no items I have intentionally marked for retention
in stockroom, yet every Monday I go to my inventory and delete random items that
have shown up as zero count stockroom items.
Is this something I have done in error, or is it a system problem?
Any help would be appreciated.
Thanks,
Stan.
|
Author: | johnnyfoto | Posted: | Apr 21, 2019 13:20 | Subject: | How can I add a missing inventory? | Viewed: | 57 times | Topic: | Inventories | Status: | Open | |
| Hi There,
I'd like to load a full inventory of a set. How can I do it?
Thanks a lot!
Johnny
|
Author: | Naughty_UK | Posted: | Apr 20, 2019 08:41 | Subject: | What do the ! and * symbols mean under image? | Viewed: | 95 times | Topic: | Inventories | Status: | Open | |
| This may be a dumb question but I've looked in the help and can't find
anything. There's also nothing in the hover-over tooltips or any other clues
on the inventories themselves.
When you view a set inventory, each part listed usually has a ! or a * (or both)
underneath the part image thumbnail. Can anyone tell me what they mean? ta.
|
|
Author: | primadeluxe | Posted: | Apr 19, 2019 02:20 | Subject: | Inventory set 248-2 Factory with Conveyor B | Viewed: | 36 times | Topic: | Inventories | Status: | Open | |
| Hi there,
I like to build old sets, so I tried to build set 248-2 Factory with Conveyor
Belt, but I could not with the inventory on BL. Anybody want to check this for
me?
I tried the inventory on Peeron.com and this inventory difference from BL. Building
this set with the inventory on Peeron was right.
Time to change the inventory on BL?
Greets and have a nice day, Wilbert
|
|
Author: | Brixalotl | Posted: | Apr 15, 2019 13:38 | Subject: | Is the inv change request page broken? | Viewed: | 32 times | Topic: | Inventories | Status: | Open | |
| I am trying to enter an alternate part change request and keep getting the error
of "item no required if item type is entered", which I know is incorrect since
the system already has the info when you enter the inv item number. I notice
the layout has been updated since the last time I used it, with the action column
being a drop down now and the item type column has been removed (part, gear,
etc).
I am curious if others are getting the same error, and what I can do to overcome
it.
Thanks,
Jim
|
|
Author: | waterman | Posted: | Apr 15, 2019 05:53 | Subject: | Inventory backup | Viewed: | 67 times | Topic: | Inventories | Status: | Open | |
| I was wondering if there is a way to backup the inventory of whats in your store,
and how to restore it if there was a problem with the website. I saw a section
in the Inventory screen for download would this be it and how is it done. If
anyone can help with this question that would be great, thank you so much.
|
Author: | Cavalady | Posted: | Apr 15, 2019 04:43 | Subject: | 7018 Viking Midgard Serpent - 2 x red horns | Viewed: | 50 times | Topic: | Inventories | Status: | Open | |
| I've just put together set 7018 (Viking ship battles the Midgard Serpent).
Inventory calls for 8 red horns (53451). Six are for the serpent but I can't
for the life of me see where the other two are supposed to go? Anyone able to
help?
Cheers!
Brick By Brick Shop
|
Author: | bb1375380 | Posted: | Apr 12, 2019 11:22 | Subject: | Constitution Train Chase Bag 1 contents | Viewed: | 36 times | Topic: | Inventories | Status: | Open | |
| Does anyone have a list of bag 1 contents for this set? We were given the set,
and my lids LOVE trains, and it appears all of bag 1, the Steam Engine, is missing.
I'm trying to replicate it, as we have the instructions and probably most
of the rest of the whole set. Set number 79111 Lone Ranger Constitution Train
Chase
TIA
|
Author: | RONALDSLEGO | Posted: | Apr 12, 2019 06:54 | Subject: | Item changes gives problem in Brickstock | Viewed: | 63 times | Topic: | Inventories | Status: | Open | |
| There are 10 items in my inventory in Bricklink that will not import any more
in Brickstock.
Bricklink changed the item numbers from this minifigs by adding a extra 0 on
the 10th of April I noticed.
Have tryed to delete 1 and add it again did not solve the problem. Any body here
knows what to do?
cty0055 cty0128 cty0146 are a few of theme
Greetings Ronald
|
|
Author: | Admin_Russell | Posted: | Apr 9, 2019 18:15 | Subject: | We have a new Inventories Administrator! | Viewed: | 234 times | Topic: | Inventories | Status: | Open | |
| Hello everyone,
I'm very pleased to announce that we have appointed a new Inventories Administrator,
to fill in the place that Marek left when he was promoted to Catalog Associate.
For this position we have selected member Paulvdb (Paul), whom many of you may
know as a catalog contributor, inventories contributor, and Forum participant.
He is also an established seller (since 2011, I believe) so many of you may know
him also through that channel.
Paul has distinguished himself especially by his work with older inventories,
sharing many sealed set contents data with the site for some of our precious
old vintage sets. We have found his contributions to be ultra reliable and think
he is going to do very well in this new role.
Congratulations are in order!
Russell
|
|
Author: | POPS_BLOCK_SHOP | Posted: | Apr 8, 2019 10:12 | Subject: | Lego Store Pick Brick Wall Small Cup Vs Large | Viewed: | 121 times | Topic: | Inventories | Status: | Open | |
| Made a short 4 minute video with spreadsheet and all of what Cup is a better
value at Lego Store Pick a Brick Wall.
LARGE Vs. SMALL
https://youtu.be/4ewH-smrNFc
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|