Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | SylvainLS | Posted: | Jan 24, 2019 18:45 | Subject: | Re: How to Use MY REMARKS when Parting Out :Video | Viewed: | 30 times | Topic: | Inventories | |
| In Inventories, kzinti writes:
| […]
My trays are lettered horizontally by section, and numbered vertically, two columns
of trays per letter section. So A1-A10 are in column one, A11-A20 are in column
two.
|
And that here is why you should have started numbering from zero: you columns
would have been 00-09, 10-19, etc.
First digit = column, second digit = row.
Of course, the day you add a row, you count from 00 to 0A.
And then you can go up to 36 rows and 36 columns, all with a two “digits” number.
All neat and well ordered. Yessir.
|
|
Author: | qwertyboy | Posted: | Jan 24, 2019 18:15 | Subject: | Re: API for Prestashop | Viewed: | 65 times | Topic: | Inventories | |
| In Inventories, steinewelten writes:
| Hello i look for a api from bricklink to prestashop
|
I am guessing you want to set up your own web shop, and use BrickLink as a back-end
for all the info. If you then also want to handle your own orders and not have
those flow through BL - that won't happen. It would be a blatant violation
of the ToS.
If I misunderstood, you might want to explain some more what you are trying to
accomplish.
Niek.
|
|
Author: | kzinti | Posted: | Jan 24, 2019 18:11 | Subject: | Re: How to Use MY REMARKS when Parting Out :Video | Viewed: | 34 times | Topic: | Inventories | |
| In Inventories, POPS_BLOCK_SHOP writes:
| Made a video on instructions how to use the "MY REMARKS" Section for your bricklink
store inventory when parting out Lego Sets.
Hope some can find this useful!
https://youtu.be/sNa2IYrS8nA
|
Very nice setup, and a great help for those who are moving or thinking of moving,
into a larger inventory situation. Mine uses slightly larger trays, same type
of arrangement, but the trays are 2' deep x 1' wide x 4" tall, and I
use bin cups in them. I notate drawer number(s) a lot is in, as it's easy
enough to grab a whole tray and scan through in a few seconds to see which bin
cup they are in.
My trays are lettered horizontally by section, and numbered vertically, two columns
of trays per letter section. So A1-A10 are in column one, A11-A20 are in column
two. And while the whole thing is kind of free form, I try to maintain colors
in a column, and things like slopes in row 9-10, 1x plates in 7-8, 2x plates
5-6, etc. Thanks for the video!
|
|
Author: | bb721983 | Posted: | Jan 24, 2019 17:44 | Subject: | API for Prestashop | Viewed: | 94 times | Topic: | Inventories | Status: | Open | |
| Hello i look for a api from bricklink to prestashop |
Author: | POPS_BLOCK_SHOP | Posted: | Jan 24, 2019 16:00 | Subject: | How to Use MY REMARKS when Parting Out :Video | Viewed: | 92 times | Topic: | Inventories | Status: | Open | |
| Made a video on instructions how to use the "MY REMARKS" Section for your bricklink
store inventory when parting out Lego Sets.
Hope some can find this useful!
https://youtu.be/sNa2IYrS8nA
|
|
Author: | runner.caller | Posted: | Jan 23, 2019 12:09 | Subject: | Re: Import 10,000 items from rebrickable inventor | Viewed: | 32 times | Topic: | Inventories | |
| In Inventories, jameso321xyz writes:
| I can only seem to export/import parts list to BL wanted list and not store inventory,
as there doesnt seem to be a mechanism from rebrickable BL xml that adds in prices
based on criteria like set part out does.
I used rebrickable because it was supposed to be import export compatible.
I have read quite a bit about above and havent gotten anyemwhere other than filling
in missinp parts of xml in notepad++
Thanks anyone who has some input
JamesO
|
You can import the XML code from rebrickable into excel using the developer tap,
and then fill out the pricing column, the columns may need to be re-mapped depending
on what it looks like from rebrickable, then export (also on the developer tab)
the new spreadsheet to XML that is 'upload friendly' for bricklink. Follow
the rules below to make sure the XML is upload friendly.
https://www.bricklink.com/help.asp?helpID=22
|
|
Author: | jameso321xyz | Posted: | Jan 23, 2019 11:51 | Subject: | Import 10,000 items from rebrickable inventor | Viewed: | 86 times | Topic: | Inventories | Status: | Open | |
| I can only seem to export/import parts list to BL wanted list and not store inventory,
as there doesnt seem to be a mechanism from rebrickable BL xml that adds in prices
based on criteria like set part out does.
I used rebrickable because it was supposed to be import export compatible.
I have read quite a bit about above and havent gotten anyemwhere other than filling
in missinp parts of xml in notepad++
Thanks anyone who has some input
JamesO
|
|
Author: | Admin_Russell | Posted: | Jan 20, 2019 23:15 | Subject: | Re: Wrong Decorated panel for set 6361-1 | Viewed: | 73 times | Topic: | Inventories | |
| I have removed the section in Catalog Help that discouraged the submission of
SOA (sticker over assembly) parts. All legitimate stickered assemblies will now
be accepted, including those where the sticker is the only point of connection.
| In Inventories, FreeStorm writes:
Hello,
Something is wrong with inventory of set
My stickers do not correspond to catalog sticker sheet
is it multiple version? I have the same number 190145 on my stickers
As you can see at the attached picture (this picture is not from my set) the
stickers is the same as this part.
The Arrow is "Left Pattern" on both parts.
If we say the stickers is only attached on "Panel 1 x 4 x 3"
Do need I add a new part:
"Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6361"
Or we modify
- To remove note (both parts are the same on set 6361-1)
- To change set on part name
PS: I hope you can understand what I have in my mind
-Fred
|
|
|
Author: | trueger | Posted: | Jan 20, 2019 21:50 | Subject: | Re: status of 10268-1 and 853815-1 ? | Viewed: | 37 times | Topic: | Inventories | |
| In Inventories, axaday writes:
| In Inventories, trueger writes:
| These are the new release Vestas wind turbine and a holiday bauble ornament.
If these are in progress, great, thank you, please disregard. Otherwise, I'd
be willing to help provide them.
-Tim
|
They are both in the catalog. If you are talking about providing inventories,
no one has them reserved or pending.
|
Thanks for the info; yes, I was referring to inventories. I've since discovered
how to figure this question out on my own. I'll look into providing them.
|
|
Author: | axaday | Posted: | Jan 20, 2019 16:07 | Subject: | Re: status of 10268-1 and 853815-1 ? | Viewed: | 41 times | Topic: | Inventories | |
| In Inventories, trueger writes:
| These are the new release Vestas wind turbine and a holiday bauble ornament.
If these are in progress, great, thank you, please disregard. Otherwise, I'd
be willing to help provide them.
-Tim
|
They are both in the catalog. If you are talking about providing inventories,
no one has them reserved or pending.
|
Author: | trueger | Posted: | Jan 20, 2019 15:56 | Subject: | status of 10268-1 and 853815-1 ? | Viewed: | 69 times | Topic: | Inventories | Status: | Open | |
| These are the new release Vestas wind turbine and a holiday bauble ornament.
If these are in progress, great, thank you, please disregard. Otherwise, I'd
be willing to help provide them.
-Tim
|
Author: | Brickwilbo | Posted: | Jan 19, 2019 02:50 | Subject: | Re: adding orders | Viewed: | 16 times | Topic: | Inventories | |
| In Inventories, Rickaroo72 writes:
| I am new to this. I created a store so i can begin to keep track of my extra
parts. Is there an easy way to add orders to my inventory?
|
I think it's possible this way:
Click the add to Wantlist button on the order details page or after checkout.
Or add the items in Wantlist icon in the settings of the orders Placed page.
Download the Wantlist and upload it to your inventory.
|
Author: | Rickaroo72 | Posted: | Jan 18, 2019 20:30 | Subject: | adding orders | Viewed: | 44 times | Topic: | Inventories | Status: | Open | |
| I am new to this. I created a store so i can begin to keep track of my extra
parts. Is there an easy way to add orders to my inventory?
|
|
Author: | axaday | Posted: | Jan 18, 2019 06:18 | Subject: | Re: Parts for 42095-1 | Viewed: | 28 times | Topic: | Inventories | |
| In Inventories, xosofox writes:
| | You may start here:
https://www.bricklink.com/catalogInvAdd.asp
There are links on that page to the instructions. Be sure you use Manual Upload,
and take advantage of the autofill when the screen pops up. Any other questions,
please ask.
|
Hi,
Thanks, I did that
Now, two problems:
1) I "reserved" the set - how can I set it free as it looks like I cannt proceed
(see below)
2) There already is an inventory that has been added by somebody else, but
a) some of the parts added before are not available and marked red
b) some of the parts do not match the code I see in the Inventory
I understand I could edit the inventory provided by someone else - but it looks
like he/she did manage to somehow associate a correct picture in the "LEGO guide"
shown in the left column
Then there is the "big yellow wheel" that some seems not to be known to bricklink
at all. Can this be?
|
Yes a new set can have new parts.
The partial inventory you are looking at is not someone else's attempt.
That's the list of pieces that Lego.com has on the page where you can request
pieces that were missing from your set. It auto-uploads to help you get started.
|
|
Author: | bb1129666 | Posted: | Jan 18, 2019 06:07 | Subject: | Re: Parts for 42095-1 | Viewed: | 25 times | Topic: | Inventories | |
| | You may start here:
https://www.bricklink.com/catalogInvAdd.asp
There are links on that page to the instructions. Be sure you use Manual Upload,
and take advantage of the autofill when the screen pops up. Any other questions,
please ask.
|
Hi,
Thanks, I did that
Now, two problems:
1) I "reserved" the set - how can I set it free as it looks like I cannt proceed
(see below)
2) There already is an inventory that has been added by somebody else, but
a) some of the parts added before are not available and marked red
b) some of the parts do not match the code I see in the Inventory
I understand I could edit the inventory provided by someone else - but it looks
like he/she did manage to somehow associate a correct picture in the "LEGO guide"
shown in the left column
Then there is the "big yellow wheel" that some seems not to be known to bricklink
at all. Can this be?
|
|
|
Author: | peegeelee | Posted: | Jan 14, 2019 12:27 | Subject: | Re: Tool to determine sets based on inventory | Viewed: | 29 times | Topic: | Inventories | |
| In Inventories, brikomania writes:
| In Inventories, peegeelee writes:
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
| Exactly what I needed, thanks for pointing me in the right direction brikomania!
|
|
Author: | peegeelee | Posted: | Jan 14, 2019 12:21 | Subject: | Re: Tool to determine sets based on inventory | Viewed: | 27 times | Topic: | Inventories | |
| In Inventories, brikomania writes:
| In Inventories, peegeelee writes:
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
|
Thanks, let me look into that!
|
|
Author: | brikomania | Posted: | Jan 14, 2019 12:14 | Subject: | Re: Tool to determine sets based on inventory | Viewed: | 29 times | Topic: | Inventories | |
| In Inventories, peegeelee writes:
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
|
|
Author: | Shahennian | Posted: | Jan 14, 2019 12:07 | Subject: | Black Lightning | Viewed: | 129 times | Topic: | Inventories | Status: | Open | |
| Hello,
I recently purchased the "SDCC2018-2: Black Lightning" set. I then went on Brickset
to add it to my collection, but no minifig is listed for the set. I proceeded
to send them a message so they could fix this error, but they told me they rely
on Bricklink for their minifig inventory.
That's why I'm posting a message here. I noticed that there are two entries
for Black Lightning on Bricklink : comcon056-1 for the full set and sh521 for
the minifig. But these two entries are not linked one to another.
Could someone in the admin team link them?
Thanks a lot!
|
|
Author: | peegeelee | Posted: | Jan 14, 2019 11:57 | Subject: | Tool to determine sets based on inventory | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
|
Author: | Admin_Russell | Posted: | Jan 13, 2019 15:41 | Subject: | Re: Parts for 42095-1 | Viewed: | 39 times | Topic: | Inventories | |
| In Inventories, xosofox writes:
| Hi,
as I understand, parts lists for products need to be added and approved.
I'm missing the parts for 42095-1 Stunt Racer. And if they are not yet added,
I'd like to contribute.
Or can I see somehow if the list is already submitted and needs approval?
|
You may start here:
https://www.bricklink.com/catalogInvAdd.asp
There are links on that page to the instructions. Be sure you use Manual Upload,
and take advantage of the autofill when the screen pops up. Any other questions,
please ask.
|
|
Author: | bb1129666 | Posted: | Jan 13, 2019 12:32 | Subject: | Parts for 42095-1 | Viewed: | 45 times | Topic: | Inventories | Status: | Open | |
| Hi,
as I understand, parts lists for products need to be added and approved.
I'm missing the parts for 42095-1 Stunt Racer. And if they are not yet added,
I'd like to contribute.
Or can I see somehow if the list is already submitted and needs approval?
|
|
Author: | Emperor_Penguin | Posted: | Jan 12, 2019 15:02 | Subject: | Re: Lego 2018 Employee parts | Viewed: | 101 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| In Inventories, Ricardo_Penguin writes:
| In Inventories, Admin_Russell writes:
| In Inventories, Ricardo_Penguin writes:
| Hi, here's the part list for set 4002018-1 if someone would like to add the
pieces.
Looks like the only new pieces are the Figure Torsos and Santa's printed
face piece.
The set also comes with 4 instruction booklets. I also have a photo of the figures
someone if someone could add them to the catalog.
(There are 7 photos total)
Thanks
|
Do you have an original copy of the set?
|
Yes
|
If you opened it when it was sealed and have been careful with the parts, you
could do the inventory yourself and use Sealed Set Contents as the source.
Most of the data is autofilled for you when you use the "Manual" form:
https://www.bricklink.com/catalogInvAdd.asp
After that it's just a question of adding some minifigs and extras, and checking
the inventory against the parts that actually came in your set.
|
I got the set used, so can't guarantee 100% accuracy (Looks like it complete,
even comes with extra parts).
Also the whole 'catalog add or change' features confuse me, so that's
why I posted the parts list from the instructions, so someone whos used to doing
that can submit the parts forum.
|
|
Author: | Admin_Russell | Posted: | Jan 12, 2019 14:25 | Subject: | Re: Lego 2018 Employee parts | Viewed: | 84 times | Topic: | Inventories | |
| In Inventories, Ricardo_Penguin writes:
| In Inventories, Admin_Russell writes:
| In Inventories, Ricardo_Penguin writes:
| Hi, here's the part list for set 4002018-1 if someone would like to add the
pieces.
Looks like the only new pieces are the Figure Torsos and Santa's printed
face piece.
The set also comes with 4 instruction booklets. I also have a photo of the figures
someone if someone could add them to the catalog.
(There are 7 photos total)
Thanks
|
Do you have an original copy of the set?
|
Yes
|
If you opened it when it was sealed and have been careful with the parts, you
could do the inventory yourself and use Sealed Set Contents as the source.
Most of the data is autofilled for you when you use the "Manual" form:
https://www.bricklink.com/catalogInvAdd.asp
After that it's just a question of adding some minifigs and extras, and checking
the inventory against the parts that actually came in your set.
|
|
Author: | Emperor_Penguin | Posted: | Jan 12, 2019 14:17 | Subject: | Re: Lego 2018 Employee parts | Viewed: | 76 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| In Inventories, Ricardo_Penguin writes:
| Hi, here's the part list for set 4002018-1 if someone would like to add the
pieces.
Looks like the only new pieces are the Figure Torsos and Santa's printed
face piece.
The set also comes with 4 instruction booklets. I also have a photo of the figures
someone if someone could add them to the catalog.
(There are 7 photos total)
Thanks
|
Do you have an original copy of the set?
|
Yes
|
|
Author: | Admin_Russell | Posted: | Jan 12, 2019 14:05 | Subject: | Re: Lego 2018 Employee parts | Viewed: | 63 times | Topic: | Inventories | |
| In Inventories, Ricardo_Penguin writes:
| Hi, here's the part list for set 4002018-1 if someone would like to add the
pieces.
Looks like the only new pieces are the Figure Torsos and Santa's printed
face piece.
The set also comes with 4 instruction booklets. I also have a photo of the figures
someone if someone could add them to the catalog.
(There are 7 photos total)
Thanks
|
Do you have an original copy of the set?
|
|
Author: | Emperor_Penguin | Posted: | Jan 12, 2019 14:00 | Subject: | Lego 2018 Employee parts | Viewed: | 240 times | Topic: | Inventories | Status: | Open | |
| Hi, here's the part list for set 4002018-1 if someone would like to add the
pieces.
Looks like the only new pieces are the Figure Torsos and Santa's printed
face piece.
The set also comes with 4 instruction booklets. I also have a photo of the figures
someone if someone could add them to the catalog.
(There are 7 photos total)
Thanks
|
|
|
Author: | FreeStorm | Posted: | Jan 10, 2019 18:00 | Subject: | Re: Wrong Decorated panel for set 6361-1 | Viewed: | 67 times | Topic: | Inventories | |
| In Inventories, FreeStorm writes:
| Hello,
Something is wrong with inventory of set
My stickers do not correspond to catalog sticker sheet
is it multiple version? I have the same number 190145 on my stickers
As you can see at the attached picture (this picture is not from my set) the
stickers is the same as this part.
The Arrow is "Left Pattern" on both parts.
If we say the stickers is only attached on "Panel 1 x 4 x 3"
Do need I add a new part:
"Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6361"
Or we modify
- To remove note (both parts are the same on set 6361-1)
- To change set on part name
PS: I hope you can understand what I have in my mind
-Fred
|
I answer to my question
The box on my panel stickers is not the same as
The box look more higher (less square)
|
|
Author: | FreeStorm | Posted: | Jan 10, 2019 17:45 | Subject: | Wrong Decorated panel for set 6361-1 | Viewed: | 105 times | Topic: | Inventories | Status: | Open | |
| Hello,
Something is wrong with inventory of set
My stickers do not correspond to catalog sticker sheet
is it multiple version? I have the same number 190145 on my stickers
As you can see at the attached picture (this picture is not from my set) the
stickers is the same as this part.
The Arrow is "Left Pattern" on both parts.
If we say the stickers is only attached on "Panel 1 x 4 x 3"
Do need I add a new part:
"Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6361"
Or we modify
- To remove note (both parts are the same on set 6361-1)
- To change set on part name
PS: I hope you can understand what I have in my mind
-Fred
|
|
|
Author: | randyf | Posted: | Jan 7, 2019 22:20 | Subject: | Re: 5804 Belville witch's cottage | Viewed: | 38 times | Topic: | Inventories | |
| In Inventories, PieterLikesLego writes:
| Dear community,
The inventory list at bricklink for 5804 (Belville witch's cottage) states
the inclusion of 1 trans-red plate, round 1x1 straight side (4037). However when
reading the instructions, it seems that 2 could be included: 1 at the top of
the yellow bottle and 1 underneath the skeleton head inside the globe. However,
this is difficult to see. Can anyone help here?
Thanks,
Pieter
|
Good catch! Yes, it looks like their should definitely be two of this part in
the set, one underneath the skeleton head and one on the trans-yellow 1x1 cone.
I have attached an image of the last picture of the fully built set from the
instructions showing the two plates circled.
I will update the inventory accordingly. Thanks for bringing this to our attention!
Cheers,
Randy
|
|
|
Author: | bb1302345 | Posted: | Jan 7, 2019 11:48 | Subject: | 5804 Belville witch's cottage | Viewed: | 57 times | Topic: | Inventories | Status: | Open | |
| Dear community,
The inventory list at bricklink for 5804 (Belville witch's cottage) states
the inclusion of 1 trans-red plate, round 1x1 straight side (4037). However when
reading the instructions, it seems that 2 could be included: 1 at the top of
the yellow bottle and 1 underneath the skeleton head inside the globe. However,
this is difficult to see. Can anyone help here?
Thanks,
Pieter
|
|
Author: | Hygrotus | Posted: | Jan 6, 2019 15:35 | Subject: | Re: Missing piece in set 6246 | Viewed: | 39 times | Topic: | Inventories | |
| In Feedback, Tenne writes:
| Hi BrickLink,
the partlist of set (LegoCrocodile Cage) is missing a part.
Part thats missing: (LegoMinifigure, Arrow Quiver with Two Arrows).
I own two of the sets and controlled the instructions.
Best Regards
Thomas
|
Hi
It is a part of this minifig
from this set.
When you are on inventory page for this set choose option break minifigs. Then
will you have it also on the list.
|
|
Author: | Tenne | Posted: | Jan 6, 2019 15:30 | Subject: | Missing piece in set 6246 | Viewed: | 94 times | Topic: | Inventories | Status: | Open | |
| Hi BrickLink,
the partlist of set 6246-1 (LegoCrocodile Cage) is missing a part.
Part thats missing: 4498 (LegoMinifigure, Arrow Quiver with Two Arrows).
I own two of the sets and controlled the instructions.
Best Regards
Thomas
|
Author: | randyf | Posted: | Jan 5, 2019 02:35 | Subject: | Re: Pop-Up Party Bus (70828-1) | Viewed: | 40 times | Topic: | Inventories | |
| In Inventories, silver writes:
| Part 92593 (Plate, Modified 1 x 4 with 2 studs) in Coral should
be changed to the newer mold type 41740. The catalog page for 92593 shows
one known appearance.
|
It is in the early stages of being inventoried. We will make sure it is all correct
before it gets approved.
- Randy
|
Author: | silver | Posted: | Jan 5, 2019 02:24 | Subject: | Pop-Up Party Bus (70828-1) | Viewed: | 116 times | Topic: | Inventories | Status: | Open | |
| Part 92593 (Plate, Modified 1 x 4 with 2 studs) in Coral should
be changed to the newer mold type 41740. The catalog page for 92593 shows
one known appearance.
|
Author: | StoreToys4Boys | Posted: | Jan 1, 2019 19:18 | Subject: | Just add 5000 parts and now they disapear ? | Viewed: | 138 times | Topic: | Inventories | Status: | Open | |
| I just part out 5000 parts and now they disapear.
I just use part out function from a set and it did add all the parts and price
to my inventory.
I just reload my store page to see 308,386 parts but 2 minutes later its back
to 302,722 and all the new part are not there anymore.They are not in stockroom
they are just not there.
Anybody else ever got that problem?
|
Author: | normivey | Posted: | Dec 30, 2018 23:45 | Subject: | Re: Parts not showing on set inventory pages? | Viewed: | 30 times | Topic: | Inventories | |
| Ahhh. So they do. Thanks! |
Author: | StormChaser | Posted: | Dec 30, 2018 23:39 | Subject: | Re: Parts not showing on set inventory pages? | Viewed: | 33 times | Topic: | Inventories | |
| In Help, normivey writes:
| Parts that are identified as being part of a set from the parts page did not show up
in the set's inventory page.
|
Those parts appear in the inventories of figures. You can click the Break Minifigs
button at the top of an inventory page to have all the figure parts appear along
with the other items in the inventory if desired.
|
|
Author: | normivey | Posted: | Dec 30, 2018 23:27 | Subject: | Parts not showing on set inventory pages? | Viewed: | 60 times | Topic: | Inventories | Status: | Open | |
| I've come cross a couple of discrepancies with different sets today. Parts
that are identified as being part of a set from the parts page did not show up
in the set's inventory page. Two examples:
The parts page for 15444 Brick, Modified 1 x 1 x 2 with Square Hole indicates
that it is included in set 70808 Super Cycle Chase, but when I look at the inventory
for that set, it's not listed.
The parts page for 15429 Cat Tail indicates that it is included in set 41067,
but it is not listed on the inventory page for that set.
Is this only happening to me, or are others seeing the same discrepancies?
|
|
Author: | POPS_BLOCK_SHOP | Posted: | Dec 30, 2018 08:10 | Subject: | Re: BrickLink Store Video Update | Viewed: | 46 times | Topic: | Inventories | |
| In Inventories, POPS_BLOCK_SHOP writes:
| We are finally growing at a more desired pace! Feel free to follow along for
the ride!
Bricklink Store Overview
https://youtu.be/arFXJncQ7RU
|
Here is a clip of our original Bricklink store tour about two months ago.
First Store Tour 11/08/2018
https://youtu.be/4fqh_d51ZPs
|
Author: | POPS_BLOCK_SHOP | Posted: | Dec 29, 2018 20:30 | Subject: | BrickLink Store Video Update | Viewed: | 103 times | Topic: | Inventories | Status: | Open | |
| We are finally growing at a more desired pace! Feel free to follow along for
the ride!
Bricklink Store Overview
https://youtu.be/arFXJncQ7RU
|
Author: | Hygrotus | Posted: | Dec 27, 2018 14:04 | Subject: | Re: 3862 - "mixed" parts | Viewed: | 23 times | Topic: | Inventories | |
| In Inventories, agulus writes:
| Zycze szczesliwego Nowego Roku
|
Dziękuję
Happy New Year also!
|
|
Author: | agulus | Posted: | Dec 27, 2018 13:10 | Subject: | Re: 3862 - "mixed" parts | Viewed: | 25 times | Topic: | Inventories | |
| Got it Thanks! For me it was first time when I saw
mixed variants in one set.
Zycze szczesliwego Nowego Roku
In Inventories, Hygrotus writes:
| In Inventories, agulus writes:
| It doesn't matter that I got 2 parts of one variant and 8 of other?
|
It doesn't matter. It is quite common situation. In our inventory system
alternate variant has always the same quantity, because frequently in set's
copies ratio of part variants can vary, some can have only one variant of part,
some as your copy can have mix of two variants and some copies will have 2, other
3, another 4 etc. of one variant and respectively 8, 7, 6 of other variant, so
we would be overwhelmed by many possible combinations.
|
|
|
Author: | Hygrotus | Posted: | Dec 27, 2018 12:59 | Subject: | Re: 3862 - "mixed" parts | Viewed: | 33 times | Topic: | Inventories | |
| In Inventories, agulus writes:
| It doesn't matter that I got 2 parts of one variant and 8 of other?
|
It doesn't matter. It is quite common situation. In our inventory system
alternate variant has always the same quantity, because frequently in set's
copies ratio of part variants can vary, some can have only one variant of part,
some as your copy can have mix of two variants and some copies will have 2, other
3, another 4 etc. of one variant and respectively 8, 7, 6 of other variant, so
we would be overwhelmed by many possible combinations.
|
|
Author: | agulus | Posted: | Dec 27, 2018 12:36 | Subject: | Re: 3862 - "mixed" parts | Viewed: | 32 times | Topic: | Inventories | |
| It doesn't matter that I got 2 parts of one variant and 8 of other?
In Inventories, Hygrotus writes:
| In Inventories, agulus writes:
| I just bought new sealed: [Gear=3862]
and I found out that there were "mixed" 2 types of one part:
2 parts (tan):
8 parts (tan):
instead of 10 of one type only.
I think that putting a note for the sellers to be careful
about that "mix" in the Game would be helpful.
Agnes
|
In this inventory second variant is in the alternate section. This way in the
inventory is showed that in this set both variants can occur. No other notes
is needed.
|
|
|
Author: | Hygrotus | Posted: | Dec 27, 2018 12:20 | Subject: | Re: 3862 - "mixed" parts | Viewed: | 26 times | Topic: | Inventories | |
| In Inventories, agulus writes:
| I just bought new sealed: [Gear=3862]
and I found out that there were "mixed" 2 types of one part:
2 parts (tan):
8 parts (tan):
instead of 10 of one type only.
I think that putting a note for the sellers to be careful
about that "mix" in the Game would be helpful.
Agnes
|
In this inventory second variant is in the alternate section. This way in the
inventory is showed that in this set both variants can occur. No other notes
is needed.
|
|
Author: | agulus | Posted: | Dec 27, 2018 12:16 | Subject: | 3862 - "mixed" parts | Viewed: | 59 times | Topic: | Inventories | Status: | Open | |
| I just bought new sealed: [Gear=3862]
and I found out that there were "mixed" 2 types of one part:
2 parts (tan):
8 parts (tan):
instead of 10 of one type only.
I think that putting a note for the sellers to be careful
about that "mix" in the Game would be helpful.
Agnes
|
|
Author: | xxxzanka | Posted: | Dec 20, 2018 17:16 | Subject: | Re: 42082 extra items | Viewed: | 28 times | Topic: | Inventories | |
| In Inventories, xxxzanka writes:
| In Inventories, Hygrotus writes:
| In Inventories, xxxzanka writes:
| In Inventories, xxxzanka writes:
| It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Tile not plate, sorry
|
Yes you have right it is visible in this review
https://youtu.be/FTrlyFYOoes?t=21m13s
Please consider submiting invetory change request here
https://www.bricklink.com/catalogInvChange.asp?itemType=S
BTW Are you able to check rest of the inventory. Parts count on box is 4057.
Currently in this inventory we have 4056 parts. Is there missing something more?
|
Sure as soon as i will end all the steps (I have little time for legoing unfortunately)
|
Set completed: at the end my extra parts list has this differences: no 43093
(axle pin with friction blu); 1x3713 (gray tech bush) instead of 2; 4x3713 (red
tech bush) instead of 5.
|
|
Author: | randyf | Posted: | Dec 16, 2018 12:31 | Subject: | Re: Extra Sticker set in Indoraptor Rampage | Viewed: | 26 times | Topic: | Inventories | |
| In Inventories, StormChaser writes:
| But, perhaps Marek and Randy can produce some guidelines for us on how extra
sticker sheets should be handled in set inventories considering the positions
we've outlined.
|
Marek and I can look into this, but it won't be very high priority.
Also, judging by your position, you wouldn't like my guidelines.
Cheers,
Randy
|
|
Author: | StormChaser | Posted: | Dec 16, 2018 04:44 | Subject: | Re: Extra Sticker set in Indoraptor Rampage | Viewed: | 23 times | Topic: | Inventories | |
| In Inventories, paulvdb writes:
| But the sticker sheets were clearly not intended to be included as extra parts
and don't appear often enough to justify including them as extra parts.
|
There are two schools of thought on this and good arguments can definitely be
made for both positions. You have presented one side well and I will present
the other side:
1. Frequency of appearance is not currently the deciding factor in the
inclusion of an extra part in a set inventory. Should it be? I don't believe
so. How could you reasonably set a quantity of appearances before an extra is
allowed into an inventory?
2. I've never heard a convincing explanation of why any extra parts
are included in any sets, although I've certainly heard a number of theories.
Extra sticker sheets certainly don't appear to be consistent extras, but
should intentionality on the part of TLG be the deciding factor on including
extras in an inventory? I don't believe so, or at least not until we can
conclusively define (based on convincing evidence) the circumstances regarding
extra parts and their appearance in sets.
3. It is possible that extra sticker sheet extras are more common than
any of us realize, even if only packing errors. If we're not keeping any
records of their appearance in sets, then how would we truly know?
4. Extra sticker sheets fit the definition of extra parts as well as
any other extra part does. They appear in some sets and not in others. Should
we base decisions on extra parts on anything other than the fact that they came
in a set and were extra? I don't believe so.
But, perhaps Marek and Randy can produce some guidelines for us on how extra
sticker sheets should be handled in set inventories considering the positions
we've outlined.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|