|
|
| | Author: | chetzler | Posted: | Sep 29, 2019 11:25 | Subject: | Status of Friends Central Perk 21319 | Viewed: | 158 times | Topic: | Inventories | Status: | Open | |
|
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
|
|
| | | | | |
| | | | Author: | michaelhunt | Posted: | Sep 29, 2019 14:42 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 43 times | Topic: | Inventories | |
|
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
I would also like to know the status, thank you.
|
|
|
| | | | | |
| | | | Author: | randyf | Posted: | Sep 29, 2019 20:33 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 66 times | Topic: | Inventories | |
|
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
We will contact the member doing the inventory and see what is going on. If we
do not hear back from them or they are unwilling to finish the inventory in a
certain amount of time after being contacted by us, the inventory will be released
for you or someone else to do it.
Cheers,
Randy
|
|
|
| | | | | | | | | |
| | | | | | Author: | chetzler | Posted: | Sep 29, 2019 21:53 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 56 times | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
We will contact the member doing the inventory and see what is going on. If we
do not hear back from them or they are unwilling to finish the inventory in a
certain amount of time after being contacted by us, the inventory will be released
for you or someone else to do it.
Cheers,
Randy
|
OK. Thanks for the reply.
Do we really need to give this person more time after there has been little-to-no
progress for a week? Surely I'm not the only seller waiting to part out
this set. I could have had it ready by now but unfortunately the rest of my
week looks busy so hopefully someone else can take over it.
I thought inventories for new, in-production sets were supposed to be completed
using a new, sealed set (not instructions like is indicated for this set). Maybe
my recall is fuzzy but I thought I read that here.
Also, after reviewing the inventory again, in addition to the problems I already
noted there are some problems with the extras section too: there is no way that
this set includes any pieces in violet or light orange. I fear this inventory
will need some extensive review.
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | Author: | randyf | Posted: | Sep 30, 2019 11:40 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 44 times | Topic: | Inventories | |
|
| In Inventories, chetzler writes:
| Do we really need to give this person more time after there has been little-to-no
progress for a week? Surely I'm not the only seller waiting to part out
this set. I could have had it ready by now but unfortunately the rest of my
week looks busy so hopefully someone else can take over it.
|
It is in BrickLink's best interest (as well as the job of the volunteer admins)
to let new people have a chance to gain knowledge in how to contribute to BrickLink.
There is also no set-in-stone amount of time for completion of an inventory.
Therefore, this new contributor will be given a chance to correct things. As
I said before, if they are unwilling to complete the inventory or fail to do
it in an appropriate amount of time after having been notified, then the inventory
will be discarded.
| I thought inventories for new, in-production sets were supposed to be completed
using a new, sealed set (not instructions like is indicated for this set). Maybe
my recall is fuzzy but I thought I read that here.
|
They are. However, many new contributors do not understand the process and do
not realize that using the instruction manual along with a sealed set constitutes
selecting "Sealed Set Contents" as the source. This is not the first time or
last time that someone has done or will do this.
Cheers,
Randy
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | Author: | axaday | Posted: | Sep 30, 2019 12:13 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 45 times | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| Do we really need to give this person more time after there has been little-to-no
progress for a week? Surely I'm not the only seller waiting to part out
this set. I could have had it ready by now but unfortunately the rest of my
week looks busy so hopefully someone else can take over it.
|
It is in BrickLink's best interest (as well as the job of the volunteer admins)
to let new people have a chance to gain knowledge in how to contribute to BrickLink.
There is also no set-in-stone amount of time for completion of an inventory.
Therefore, this new contributor will be given a chance to correct things. As
I said before, if they are unwilling to complete the inventory or fail to do
it in an appropriate amount of time after having been notified, then the inventory
will be discarded.
| I thought inventories for new, in-production sets were supposed to be completed
using a new, sealed set (not instructions like is indicated for this set). Maybe
my recall is fuzzy but I thought I read that here.
|
They are. However, many new contributors do not understand the process and do
not realize that using the instruction manual along with a sealed set constitutes
selecting "Sealed Set Contents" as the source. This is not the first time or
last time that someone has done or will do this.
Cheers,
Randy
|
Maybe Bricklink should have a bounty system where anyone who wants something
inventoried can donate a dollar or two that will be paid to the person who does
the set. When there are dozens of people waiting to part it out, it wouldn't
be long before someone would want to snatch that money.
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | Author: | chetzler | Posted: | Sep 30, 2019 13:24 | Subject: | (Cancelled) | Viewed: | 23 times | Topic: | Inventories | |
|
| (Cancelled) |
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | Author: | chetzler | Posted: | Sep 30, 2019 13:31 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 51 times | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| Do we really need to give this person more time after there has been little-to-no
progress for a week? Surely I'm not the only seller waiting to part out
this set. I could have had it ready by now but unfortunately the rest of my
week looks busy so hopefully someone else can take over it.
|
It is in BrickLink's best interest (as well as the job of the volunteer admins)
to let new people have a chance to gain knowledge in how to contribute to BrickLink.
|
Agreed, but perhaps new people should not start with brand new, high-demand sets.
I wonder how this new user is going to recall his first inventory--it seems
like it may have been a little overwhelming. The first few inventories I did
were for small sets and figures that had been sitting for a while, so I didn't
feel any pressure while I was learning the process. After I was comfortable,
I had no problem turning around some larger sets (with new parts) in just a couple
of days.
I'm usually pretty patient with this stuff, but if I had known this inventory
was going to languish for so long I would have just reserved it myself--despite
my reservations about working for BL for free in its current state.
| There is also no set-in-stone amount of time for completion of an inventory.
Therefore, this new contributor will be given a chance to correct things. As
I said before, if they are unwilling to complete the inventory or fail to do
it in an appropriate amount of time after having been notified, then the inventory
will be discarded.
|
I hope "appropriate" means "short". Also, discarding it seems like a waste,
if the current user cannot finish it, just leave it as is for someone else--if
the new person wants to start from scratch it is easy enough to so.
|
| I thought inventories for new, in-production sets were supposed to be completed
using a new, sealed set (not instructions like is indicated for this set). Maybe
my recall is fuzzy but I thought I read that here.
|
They are. However, many new contributors do not understand the process and do
not realize that using the instruction manual along with a sealed set constitutes
selecting "Sealed Set Contents" as the source. This is not the first time or
last time that someone has done or will do this.
Cheers,
Randy
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Author: | Turez | Posted: | Sep 30, 2019 13:43 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 44 times | Topic: | Inventories | |
|
| In Inventories, chetzler writes:
| In Inventories, randyf writes:
| It is in BrickLink's best interest (as well as the job of the volunteer admins)
to let new people have a chance to gain knowledge in how to contribute to BrickLink.
|
Agreed, but perhaps new people should not start with brand new, high-demand sets.
I wonder how this new user is going to recall his first inventory--it seems
like it may have been a little overwhelming.
|
It is not the first inventory from this user.
https://www.bricklink.com/catalogList.asp?catType=S&itemInvUserID=570886
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Author: | randyf | Posted: | Sep 30, 2019 13:53 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 57 times | Topic: | Inventories | |
|
| In Inventories, chetzler writes:
| Agreed, but perhaps new people should not start with brand new, high-demand sets.
|
We do not dictate what people should or should not inventory. If someone wants
to contribute to BrickLink, we are not going to discourage them.
| I wonder how this new user is going to recall his first inventory--it seems
like it may have been a little overwhelming.
|
After looking through the credits log, this user is not a new inventory submitter
after all, so I believe that the inventory will eventually be completed to everyone's
satisfaction.
| I'm usually pretty patient with this stuff, but if I had known this inventory
was going to languish for so long I would have just reserved it myself--despite
my reservations about working for BL for free in its current state.
|
The inventory was first submitted on September 13 and last updated 2 days ago.
In my time as an Inventories Admin (almost a year), the amount of time this set
has been worked on is right on par with the amount of time the majority of new
sets are in the process of being inventoried. There is nothing at all that stands
out to me in this case as far as time is concerned.
| I hope "appropriate" means "short".
|
"Appropriate" means two weeks without any additions or changes to the inventory
once notified.
I believe your impatience is getting the best of you. You are free to use the
other tools that BrickLink provides to part out the set manually if you cannot
wait.
Cheers,
Randy
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Author: | Admin_Russell | Posted: | Sep 30, 2019 15:02 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 84 times | Topic: | Inventories | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Inventories, chetzler writes:
| | There is also no set-in-stone amount of time for completion of an inventory.
Therefore, this new contributor will be given a chance to correct things. As
I said before, if they are unwilling to complete the inventory or fail to do
it in an appropriate amount of time after having been notified, then the inventory
will be discarded.
|
I hope "appropriate" means "short". Also, discarding it seems like a waste,
if the current user cannot finish it, just leave it as is for someone else--if
the new person wants to start from scratch it is easy enough to so.
|
The biggest bottleneck when doing inventories is adding new items to the catalog.
If there are items not in the catalog yet, you could speed up the approval process
by adding them.
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | chetzler | Posted: | Sep 30, 2019 17:54 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 68 times | Topic: | Inventories | |
|
| In Inventories, Admin_Russell writes:
| In Inventories, chetzler writes:
| | There is also no set-in-stone amount of time for completion of an inventory.
Therefore, this new contributor will be given a chance to correct things. As
I said before, if they are unwilling to complete the inventory or fail to do
it in an appropriate amount of time after having been notified, then the inventory
will be discarded.
|
I hope "appropriate" means "short". Also, discarding it seems like a waste,
if the current user cannot finish it, just leave it as is for someone else--if
the new person wants to start from scratch it is easy enough to so.
|
The biggest bottleneck when doing inventories is adding new items to the catalog.
If there are items not in the catalog yet, you could speed up the approval process
by adding them.
|
Done. Took 10 minutes, tops. With my phone. Not sure why there has been such
a delay.
I didn't see anything else missing but if there is let me know, and I'll
take care of it. I wish I could help clean up the rest of the inventory...
|
|
|
| | | | | |
| | | | Author: | randyf | Posted: | Sep 30, 2019 20:42 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 55 times | Topic: | Inventories | |
|
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!
Cheers,
Randy
|
|
|
| | | | | | | | | |
| | | | | | Author: | chetzler | Posted: | Sep 30, 2019 21:00 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 63 times | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!
Cheers,
Randy
|
Thank you for taking the time to review the situation. I'm working on it
right now. It will be ready for review no later than tomorrow evening.
|
|
|
| | | | | | | | | |
| | | | | | Author: | chetzler | Posted: | Oct 2, 2019 17:22 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 46 times | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!
Cheers,
Randy
|
This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | Author: | axaday | Posted: | Oct 2, 2019 18:13 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 51 times | Topic: | Inventories | |
|
| Thanks
In Inventories, chetzler writes:
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!
Cheers,
Randy
|
This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!
|
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | Author: | michaelhunt | Posted: | Oct 2, 2019 22:57 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 43 times | Topic: | Inventories | |
|
| Thank you!
In Inventories, axaday writes:
| Thanks
In Inventories, chetzler writes:
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!
Cheers,
Randy
|
This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!
|
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Author: | manganschlamm | Posted: | Oct 3, 2019 02:15 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 64 times | Topic: | Inventories | |
|
| In Inventories, michaelhunt writes:
| Thank you!
In Inventories, axaday writes:
| Thanks
In Inventories, chetzler writes:
| In Inventories, randyf writes:
| In Inventories, chetzler writes:
| This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.
Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.
It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.
If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!
|
The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!
Cheers,
Randy
|
This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!
|
|
|
Thank you, very nice indeed. I am waiting for the minifigures from this set to
become available in greater abundance, because I like to populate my modulars
with this type of characters from licensed sets (admittedly this may not be a
purists perspective).
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | SurplusParts | Posted: | Oct 3, 2019 07:47 | Subject: | Re: Status of Friends Central Perk 21319 | Viewed: | 53 times | Topic: | Inventories | |
|
| | Thank you, very nice indeed. I am waiting for the minifigures from this set to
become available in greater abundance, because I like to populate my modulars
with this type of characters from licensed sets (admittedly this may not be a
purists perspective).
|
I think these minifigures are going to get very cheap and there will be lots
and lots on the market quickly. The set is one of the best part out sets i have
seen for a long time in terms of return. I sold 16 figures from this set today
already.
|
|
|
|
|