|
 |
| | | Author: | FigBits  | | Posted: | Jan 17, 2011 20:37 | | Subject: | Suggestion: better inventory view of superlot | | Viewed: | 68 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
--
Marc.
|
|
| | | | | |
| | | | | Author: | therobo | | Posted: | Jan 18, 2011 03:58 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 29 times | | Topic: | Suggestions | |
|
| In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
--
Marc.
|
Good idea 
Btw. can you access paired parts super lots from your MyInventory page?
Ronald
|
|
| | | | | | | | | |
| | | | | | | Author: | FigBits | | Posted: | Jan 18, 2011 07:56 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 20 times | | Topic: | Suggestions | |
|
| In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
|
|
| | | | | | | | | | | | | |
| | | | | | | | | Author: | therobo | | Posted: | Jan 18, 2011 08:59 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 16 times | | Topic: | Suggestions | |
|
| In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these 
FYI, I have 41 Paired Parts Super Lots...
Ronald
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | gkistemaker | | Posted: | Jan 18, 2011 09:13 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 19 times | | Topic: | Suggestions | |
|
| In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these
FYI, I have 41 Paired Parts Super Lots...
Ronald
|
That link works for me and I also have no problem with:
http://www.bricklink.com/inventory_detail.asp?bindType=2
But I only created one paired superlot so I could try it.
Did you try "Search my inventory" "Bound to superlots"
Gerrit
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | gkistemaker | | Posted: | Jan 18, 2011 09:32 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 13 times | | Topic: | Suggestions | |
|
| In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these
FYI, I have 41 Paired Parts Super Lots...
Ronald
|
Probably not what you are looking for:
http://www.bricklink.com/store.asp?sID=5200&bindType=2
Gerrit
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | Author: | therobo | | Posted: | Jan 18, 2011 09:47 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 13 times | | Topic: | Suggestions | |
|
| In Suggestions, gkistemaker writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these
FYI, I have 41 Paired Parts Super Lots...
Ronald
|
Probably not what you are looking for:
http://www.bricklink.com/store.asp?sID=5200&bindType=2
Gerrit
|
Thanx a lot for both of your tips.
At least they are findable now.
Quite a little cumbersome to edit them, though.
What annoys me is that the error was reported months ago and is acknowledged
but it's still not resolved 
Ronald
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | Author: | TorontoLego | | Posted: | Jan 18, 2011 10:07 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 17 times | | Topic: | Suggestions | |
|
| BTW..
Super Lot #19061
This one has two rights.
In Suggestions, therobo writes:
| | In Suggestions, gkistemaker writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these
FYI, I have 41 Paired Parts Super Lots...
Ronald
|
Probably not what you are looking for:
http://www.bricklink.com/store.asp?sID=5200&bindType=2
Gerrit
|
Thanx a lot for both of your tips.
At least they are findable now.
Quite a little cumbersome to edit them, though.
What annoys me is that the error was reported months ago and is acknowledged
but it's still not resolved
Ronald
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | Author: | therobo | | Posted: | Jan 18, 2011 10:22 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 11 times | | Topic: | Suggestions | |
|
| In Suggestions, TorontoLego writes:
| | BTW..
Super Lot #19061
This one has two rights.
|
Oops...
Thanx!
| |
In Suggestions, therobo writes:
| | In Suggestions, gkistemaker writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these
FYI, I have 41 Paired Parts Super Lots...
Ronald
|
Probably not what you are looking for:
http://www.bricklink.com/store.asp?sID=5200&bindType=2
Gerrit
|
Thanx a lot for both of your tips.
At least they are findable now.
Quite a little cumbersome to edit them, though.
What annoys me is that the error was reported months ago and is acknowledged
but it's still not resolved
Ronald
|
|
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | Author: | FigBits | | Posted: | Jan 18, 2011 10:46 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 14 times | | Topic: | Suggestions | |
|
| In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these
FYI, I have 41 Paired Parts Super Lots...
|
The link you gave works for me.
--
Marc.
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | Author: | therobo | | Posted: | Jan 18, 2011 13:18 | | Subject: | Re: Suggestion: better inventory view of superlot | | Viewed: | 32 times | | Topic: | Suggestions | |
|
| In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | In Suggestions, therobo writes:
| | In Suggestions, fleury writes:
| | When I'm looking at a superlot in My Inventory, I can see the price that I set
each part at, and I can see each part's "My Cost", but I have to manually add
these up to know the totals for the entire superlot.
I'd like to see a sum of both values at the top, in the violet section which
shows other attributes of the superlot.
|
Good idea
Btw. can you access paired parts super lots from your MyInventory page?
|
Yep. There are likely multiple ways to get there. What I do is go to one of the
parts in the pair in My Inventory. At the bottom right of the listing, there
is a link for the part number and a link for the Super Lot ID. Click on that
one to bring up the superlot.
--
Marc.
|
I know how it SHOULD work, but it DOESN'T work for paired parts in MyInventory.
Check here:
http://www.bricklink.com/inventory.asp?itemView=4
I always get an error when clicking on Paired Parts.
The way you described it WOULD work if I WOULD know to which part to go.
How do you find these
FYI, I have 41 Paired Parts Super Lots...
|
The link you gave works for me.
--
Marc.
|
Hi,
this one also?
http://www.bricklink.com/inventory_detail.asp?bindType=2
I get:
Microsoft OLE DB Provider for SQL Server error '80040e14'
Incorrect syntax near the keyword 'ASC'.
/inventory_detail_code.asp, line 1864
Ronald
|
|
|
|
|
|
Canada, Ontario
Germany, Berlin
