Discussion Forum: Inventories(Post New Message)
Redisplay Messages: Compact | Brief | All | Full      Show Messages: All | Without Replies

 Author: kelmgo View Messages Posted By kelmgo
 Posted: Oct 11, 2019 11:31
 Subject: Re: releasing items from the stockroom
 Viewed: 15 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

kelmgo (14)

Location:  Australia, Western Australia
Member Since Contact Type Status
Sep 2, 2014 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Kelmsales
In Inventories, Teup writes:
  In Inventories, kelmgo writes:
  Is there any way of releasing (listing) the entire contents of a stockroom in
one hit or do I have to list every item individually

You wrote "a stockroom", so maybe you have the multiple stockrooms option switched
on, but if you only have one stockroom, this is how to change the availability
status:

On your inventory page, at the bottom there's "Update My Inventory:".
Select the radio button for "Change availability status to X Store Item Stockroom
Item"
In the dialog below, change "update only items in above selected categories"
to "Update my whole inventory". Then click "submit changes".
It's truly horrible interfacing, and extremely error-prone, but if you sit
tight you'll get through it

Thanks, I have just started adding items and to be honest I didn't have a
proper look at that page - cheers Chris
 Author: bje View Messages Posted By bje
 Posted: Oct 10, 2019 01:28
 Subject: Re: Keeping Inventory organized
 Viewed: 23 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

bje (1241)

Location:  South Africa, Western Cape
Member Since Contact Type Status
May 24, 2010 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: JE Bricks
In Inventories, studcitybricks writes:
  Does any experienced Bricklinker know anything about using BrickStock to
upload to Bricklink? There are so many options on Bricklink for concatenating
items and such which I don't understand. Let's say I have five 1 x 2
black bricks in my store in location 75 which was noted in a remark and four
black 1 x 2 bricks that are in my store, but don't have a remark. How can
I consolidate an upload of three 1 x 2 black bricks into the lot without the
remark to cut down on the amount of lots I have?

Any help would be greatly appreciated.

Thanks,
Stud City Bricks

If you upload with Brickstock, a lot gets consolidated with a lot already in
your inventory only when the both the remarks and the comments are 100% the same.

So if you have 1 lot with no remark, 1 lot with 75 in the remark and you upload
a new lot with no remark, it will consolidate to the lot with no remark.

If you upload a new lot with a remark set to 74 it will make a new lot so you
will end up with no remark, 75 and 74 as lots.

I got away from the remarks feature awhile ago precisely because loads of lots
frustrates me a as a buyer, it is clumsy to use as a seller and does not always
have the desired result. Took me 4 months to clean up my inventory and get all
those remarks removed and reduce the number of lots.

Incidentally, you can also manually fix your lots by going here:
https://www.bricklink.com/inventory.asp
tick the "non-unique" box on the right under "Search my Inventory" and click
go. This will show you every lot which has a different comment/remark/stockroom/reserved
or a combination of all of those.
 Author: studcitybricks View Messages Posted By studcitybricks
 Posted: Oct 9, 2019 21:25
 Subject: Keeping Inventory organized
 Viewed: 84 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

studcitybricks (213)

Location:  USA, Ohio
Member Since Contact Type Status
Jun 12, 2012 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Stud City Brick Co.
Does any experienced Bricklinker know anything about using BrickStock to
upload to Bricklink? There are so many options on Bricklink for concatenating
items and such which I don't understand. Let's say I have five 1 x 2
black bricks in my store in location 75 which was noted in a remark and four
black 1 x 2 bricks that are in my store, but don't have a remark. How can
I consolidate an upload of three 1 x 2 black bricks into the lot without the
remark to cut down on the amount of lots I have?

Any help would be greatly appreciated.

Thanks,
Stud City Bricks
 Author: bje View Messages Posted By bje
 Posted: Oct 9, 2019 09:55
 Subject: Re: Negative Quantity / Stockroom
 Viewed: 40 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

bje (1241)

Location:  South Africa, Western Cape
Member Since Contact Type Status
May 24, 2010 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: JE Bricks
Old problem - use this link to frequently check if your store returns 0 quantities
or negatives.

https://www.bricklink.com/search.asp?viewFrom=sa&qMax=0&pMin=.01&itemBrand=0&itemType=P&searchSort=P&sz=25

I should think stores with this problem should just delete those lots. Of course
it would help if some admin somewhere could alert the respective stores, sigh.


In Inventories, Teup writes:
  Any admin to comment on this? I would also really like to know.

In Inventories, BrickFlo writes:
  No reaction on any channel until now.


In Inventories, Leftoverbricks writes:
  In Inventories, BrickFlo writes:
  Good morning and Greetings from Germany

Tonight I got that order as shown. Every ordered part is physically in my shop
and I can do the order without problems.

But of course, I'm kind of scared about the negative quantity left?!?

With kind regards,
Florian

Nobody to comment on this?
 Author: Teup View Messages Posted By Teup
 Posted: Oct 9, 2019 08:58
 Subject: Re: Negative Quantity / Stockroom
 Viewed: 40 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

Teup (4130)

Location:  Netherlands, Utrecht
Member Since Contact Type Status
May 6, 2004 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: The T-workshop
Any admin to comment on this? I would also really like to know.

In Inventories, BrickFlo writes:
  No reaction on any channel until now.


In Inventories, Leftoverbricks writes:
  In Inventories, BrickFlo writes:
  Good morning and Greetings from Germany

Tonight I got that order as shown. Every ordered part is physically in my shop
and I can do the order without problems.

But of course, I'm kind of scared about the negative quantity left?!?

With kind regards,
Florian

Nobody to comment on this?
 Author: BrickFlo View Messages Posted By BrickFlo
 Posted: Oct 9, 2019 08:51
 Subject: Re: Negative Quantity / Stockroom
 Viewed: 31 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

BrickFlo (4366)

Location:  Germany, Baden-Württemberg
Member Since Contact Type Status
Apr 25, 2014 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: BrickFlo and Son
No reaction on any channel until now.


In Inventories, Leftoverbricks writes:
  In Inventories, BrickFlo writes:
  Good morning and Greetings from Germany

Tonight I got that order as shown. Every ordered part is physically in my shop
and I can do the order without problems.

But of course, I'm kind of scared about the negative quantity left?!?

With kind regards,
Florian

Nobody to comment on this?
 Author: Teup View Messages Posted By Teup
 Posted: Oct 9, 2019 07:55
 Subject: Re: releasing items from the stockroom
 Viewed: 26 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

Teup (4130)

Location:  Netherlands, Utrecht
Member Since Contact Type Status
May 6, 2004 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: The T-workshop
In Inventories, kelmgo writes:
  Is there any way of releasing (listing) the entire contents of a stockroom in
one hit or do I have to list every item individually

You wrote "a stockroom", so maybe you have the multiple stockrooms option switched
on, but if you only have one stockroom, this is how to change the availability
status:

On your inventory page, at the bottom there's "Update My Inventory:".
Select the radio button for "Change availability status to X Store Item Stockroom
Item"
In the dialog below, change "update only items in above selected categories"
to "Update my whole inventory". Then click "submit changes".
It's truly horrible interfacing, and extremely error-prone, but if you sit
tight you'll get through it
 Author: kelmgo View Messages Posted By kelmgo
 Posted: Oct 9, 2019 07:36
 Subject: releasing items from the stockroom
 Viewed: 52 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

kelmgo (14)

Location:  Australia, Western Australia
Member Since Contact Type Status
Sep 2, 2014 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Kelmsales
Is there any way of releasing (listing) the entire contents of a stockroom in
one hit or do I have to list every item individually
 Author: randyf View Messages Posted By randyf
 Posted: Oct 6, 2019 10:48
 Subject: Re: Disney Train Inventory
 Viewed: 41 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

randyf (372)

Location:  USA, Ohio
Member Since Contact Type Status
Sep 16, 2009 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store Closed Store: The Bricking Spectre
BrickLink Inventories Administrator (?)
In Inventories, tchrtutr writes:
  Are there any plans for the inventory for the Disney Train to be posted?

BrickLink inventories are provided by volunteers. When someone out there who
owns the set decides that they would like to add the inventory to BrickLink,
then the inventory will become available. Until that time, you will have to be
patient.

Cheers,
Randy
 Author: tchrtutr View Messages Posted By tchrtutr
 Posted: Oct 6, 2019 06:21
 Subject: Disney Train Inventory
 Viewed: 70 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

tchrtutr (867)

Location:  USA, Pennsylvania
Member Since Contact Type Status
Jan 10, 2013 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: My Kids Love Bricks
Are there any plans for the inventory for the Disney Train to be posted?
 Author: corbindallas View Messages Posted By corbindallas
 Posted: Oct 3, 2019 13:37
 Subject: Re: 75976 Overwatch Wrecking Ball
 Viewed: 34 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

corbindallas (175)

Location:  USA, Texas
Member Since Contact Type Status
Nov 20, 2014 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Preserved in Plastic
In Inventories, randyf writes:
  In Inventories, corbindallas writes:
  This set is not inventoried.

Now what ?

BrickLink inventories are provided by volunteers. So the next step for you is
inventory it or wait until someone else does.

Cheers,
Randy

Hey Randy I just saw some good info from Hygrotus on my other post about 70422
Hidden Side Shrimp Shack Attack.

Not sure what he was getting with his reply but maybe I will get it someday.

Inventories pending approval
https://www.bricklink.com/catalogListOld.asp?invPend=Y
Inventories reserved
https://www.bricklink.com/catalogListOld.asp?invRes=Y
Not yet inventoried
https://www.bricklink.com/catalogListOld.asp?v=3&itemInvUserID=0
 Author: corbindallas View Messages Posted By corbindallas
 Posted: Oct 3, 2019 13:24
 Subject: Re: 75976 Overwatch Wrecking Ball
 Viewed: 25 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

corbindallas (175)

Location:  USA, Texas
Member Since Contact Type Status
Nov 20, 2014 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Preserved in Plastic
In Inventories, randyf writes:
  In Inventories, corbindallas writes:
  This set is not inventoried.

Now what ?

BrickLink inventories are provided by volunteers. So the next step for you is
inventory it or wait until someone else does.

Cheers,
Randy

Thanks for being helpful Randy!
I am still new to bricklink in some areas..
Typically i see newer sets inventoried and available to part out really fast.
This set was on the shelf about 3 weeks ago and I passed on picking it up for
$16 because I couldn't the part out value.
Then I noticed some of the new sets say part out pending approval.
But this one did not.

I am very interested in how this part of BL works.
Where it is located. How to use it. Best practices ect.

Is there a tutorial somewhere that tell how to submit a sets inventory ?

Again thank you for being helpful!
 Author: SurplusParts View Messages Posted By SurplusParts
 Posted: Oct 3, 2019 07:47
 Subject: Re: Status of Friends Central Perk 21319
 Viewed: 42 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

SurplusParts (1512)

Location:  Australia, Victoria
Member Since Contact Type Status
Apr 2, 2017 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: SurplusParts
  Thank you, very nice indeed. I am waiting for the minifigures from this set to
become available in greater abundance, because I like to populate my modulars
with this type of characters from licensed sets (admittedly this may not be a
purists perspective).

I think these minifigures are going to get very cheap and there will be lots
and lots on the market quickly. The set is one of the best part out sets i have
seen for a long time in terms of return. I sold 16 figures from this set today
already.
 Author: manganschlamm View Messages Posted By manganschlamm
 Posted: Oct 3, 2019 02:15
 Subject: Re: Status of Friends Central Perk 21319
 Viewed: 58 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

manganschlamm (1286)

Location:  Germany, Rheinland-Pfalz
Member Since Contact Type Status
Mar 8, 2016 Contact Member Buyer
Buying Privileges - OK
In Inventories, michaelhunt writes:
  Thank you!

In Inventories, axaday writes:
  Thanks

In Inventories, chetzler writes:
  In Inventories, randyf writes:
  In Inventories, chetzler writes:
  This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.

Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.

It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.

If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!

The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!

Cheers,
Randy

This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!


Thank you, very nice indeed. I am waiting for the minifigures from this set to
become available in greater abundance, because I like to populate my modulars
with this type of characters from licensed sets (admittedly this may not be a
purists perspective).
 Author: michaelhunt View Messages Posted By michaelhunt
 Posted: Oct 2, 2019 22:57
 Subject: Re: Status of Friends Central Perk 21319
 Viewed: 33 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

michaelhunt (162)

Location:  USA, Florida
Member Since Contact Type Status
Mar 26, 2017 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Brick Counters Bazaar
Thank you!

In Inventories, axaday writes:
  Thanks

In Inventories, chetzler writes:
  In Inventories, randyf writes:
  In Inventories, chetzler writes:
  This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.

Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.

It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.

If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!

The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!

Cheers,
Randy

This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!
 Author: axaday View Messages Posted By axaday
 Posted: Oct 2, 2019 18:13
 Subject: Re: Status of Friends Central Perk 21319
 Viewed: 48 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

axaday (3902)

Location:  USA, Oklahoma
Member Since Contact Type Status
Jun 28, 2005 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Axaday
Thanks

In Inventories, chetzler writes:
  In Inventories, randyf writes:
  In Inventories, chetzler writes:
  This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.

Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.

It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.

If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!

The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!

Cheers,
Randy

This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!
 Author: Adjour View Messages Posted By Adjour
 Posted: Oct 2, 2019 17:32
 Subject: Re: 70422 Hidden Side Shrimp Shack Attack
 Viewed: 43 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

Adjour (473)

Location:  USA, California
Member Since Contact Type Status
Aug 1, 2016 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: The Chili is a Bit Spicy
In Inventories, Hygrotus writes:
  In Inventories, Adjour writes:
  In Inventories, randyf writes:
  In Inventories, corbindallas writes:
  This set is not inventoried.

It is currently in the process of being inventoried.

Cheers,
Randy

Question, sorry if the answer is obvious, I haven't been in every corner
of this site.

Is there a way to know what sets are in progress of being inventoried vs what
ones still need volunteers?

Yes
Inventories pending approval
https://www.bricklink.com/catalogListOld.asp?invPend=Y
Inventories reserved
https://www.bricklink.com/catalogListOld.asp?invRes=Y
Not yet inventoried
https://www.bricklink.com/catalogListOld.asp?v=3&itemInvUserID=0

I will look at those! Thank you!!!
 Author: chetzler View Messages Posted By chetzler
 Posted: Oct 2, 2019 17:22
 Subject: Re: Status of Friends Central Perk 21319
 Viewed: 43 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

chetzler (1328)

Location:  USA, Minnesota
Member Since Contact Type Status
Feb 12, 2005 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: Lost Boys' Brick Shop
In Inventories, randyf writes:
  In Inventories, chetzler writes:
  This inventory has been pending, unchanged, for at least a week. A review of
the pending inventory shows some printed parts still missing (but in the catalog).
There is no image for the "Central Perk" glass panel and the 1x4 "Service" tile
has already been added to the catalog. The only parts I can see that are still
missing (and still not awaiting approval) are the black 1x4x3 menu tile and the
sticker sheet.

Additionally the inventory still contains most of the minifigures parts which
obviously need to be removed. The Pearl gold cone listed is also the wrong variety.

It almost feels like the member doing the inventory for this set doesn't
have the set in hand: this should be a requirement, especially for an exclusive
set like this.

If an admin will release this inventory to me I will double-check it, remove
the extraneous parts, add the missing parts to the catalog, and have it ready
for approval today. I parted out five of these more than a week ago and have
been waiting far too long for the inventory to be completed!

The admin team discussed this situation behind the scenes and came to the decision
to release this inventory to you for completion. After some further research,
it was decided that this was the best course of action for this inventory. Good
luck!

Cheers,
Randy

This inventory is completed and ready for use. Thanks to the inventory admins
for the quick approval!
 Author: Hygrotus View Messages Posted By Hygrotus
 Posted: Oct 2, 2019 17:21
 Subject: Re: 70422 Hidden Side Shrimp Shack Attack
 Viewed: 31 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

Hygrotus (812)

Location:  Poland, w. Wielkopolskie
Member Since Contact Type Status Collage
Feb 3, 2011 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
View Collage Pic
Store Closed Store: The Insect Store
BrickLink Catalog Associate (?)
In Inventories, Adjour writes:
  In Inventories, randyf writes:
  In Inventories, corbindallas writes:
  This set is not inventoried.

It is currently in the process of being inventoried.

Cheers,
Randy

Question, sorry if the answer is obvious, I haven't been in every corner
of this site.

Is there a way to know what sets are in progress of being inventoried vs what
ones still need volunteers?

Yes
Inventories pending approval
https://www.bricklink.com/catalogListOld.asp?invPend=Y
Inventories reserved
https://www.bricklink.com/catalogListOld.asp?invRes=Y
Not yet inventoried
https://www.bricklink.com/catalogListOld.asp?v=3&itemInvUserID=0
 Author: Adjour View Messages Posted By Adjour
 Posted: Oct 2, 2019 17:14
 Subject: Re: 70422 Hidden Side Shrimp Shack Attack
 Viewed: 40 times
 Topic: Inventories
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
BrickLink
ID Card

Adjour (473)

Location:  USA, California
Member Since Contact Type Status
Aug 1, 2016 Contact Member Seller
Buying Privileges - OKSelling Privileges - OK
Store: The Chili is a Bit Spicy
In Inventories, randyf writes:
  In Inventories, corbindallas writes:
  This set is not inventoried.

It is currently in the process of being inventoried.

Cheers,
Randy

Question, sorry if the answer is obvious, I haven't been in every corner
of this site.

Is there a way to know what sets are in progress of being inventoried vs what
ones still need volunteers?

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More