Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | elclair | Posted: | Feb 12, 2019 16:10 | Subject: | Identify old Lego piece | Viewed: | 112 times | Topic: | Catalog | Status: | Open | |
| Hey all.
I bought a crate of used Lego and found a few of these pieces I can't identify
(or seem to find in the bricklink Catalog) It's a hollow brick with "Lego"
printed in the studs.(no reference number)
|
|
Author: | mhortar | Posted: | Feb 12, 2019 14:33 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 52 times | Topic: | Catalog | |
| In Catalog, SylvainLS writes:
|
(There might still be problems though. Say, a buyer parts out a set into a WL,
they are asked if they allow other variants, they accept because they think it
will be cheaper and easier to fullfil, but the set really can only be built with
the one variant )
|
This part is the one that would potentially cause issues. Things like the variations
of 3933/3934 that can cause parts to physically not attach in some scenarios.
That's the first I can think of just because I've experienced it in the
past.
Josh
|
|
Author: | SylvainLS | Posted: | Feb 12, 2019 14:05 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 57 times | Topic: | Catalog | |
| In Catalog, brikomania writes:
| […]
Thank you for the explanations. I agree that some times, or for some people it
can be useful, but i believe that most of the time it isn't. As suggested,
I think that there should be an option to do a general search for wantlists or
in store, choose if you care about variants or not.
|
The database isn’t made for this, and the only way now is to have “undetermined”
variants, which just adds another variant, fouls the price guide, and makes half
the buyers unhappy.
What would be nice would be “virtual undetermined parts,” and inventories and
sellers should still have to use the determined variants but searches and WLs
wouldn’t.
(There might still be problems though. Say, a buyer parts out a set into a WL,
they are asked if they allow other variants, they accept because they think it
will be cheaper and easier to fullfil, but the set really can only be built with
the one variant )
But that means modifying the database and the site too deeply, at least for now….
|
|
Author: | nectara | Posted: | Feb 12, 2019 13:39 | Subject: | Re: Allow AFOLs to "Bricklink" the ADP sets | Viewed: | 60 times | Topic: | Catalog | |
| In Suggestions, Brick.Door writes:
| There are no plans to do so, but I hope that once the regular sales period is
finished Bricklink allows the inventory of these sets to be added to the catalog
so people can add them to a want list and buy the parts they need to build them.
Since they use mostly common parts, I think many AFOLs would prefer to build
them with the parts in their own collection, and just buy any ones they are missing.
Not only would this generate revenue for Bricklink by increased sales, it would
be an olive branch to the sellers who have been completely excluded from this
promotion.
Bricklink has done so much to build the AFOL community and it has become a verb
within our vocabulary (much like Google has in the general population). It would
be a sad irony if the sets created by Bricklink to celebrate AFOLs cannot be
Bricklinked by AFOLs.
|
I voted no.
They are MOC's not officials Lego sets.
Regards
Nectara
|
|
Author: | mhortar | Posted: | Feb 12, 2019 13:29 | Subject: | Re: Allow AFOLs to "Bricklink" the ADP sets | Viewed: | 55 times | Topic: | Catalog | |
| In Suggestions, Teup writes:
| In Suggestions, mhortar writes:
| In Suggestions, Brick.Door writes:
| There are no plans to do so, but I hope that once the regular sales period is
finished Bricklink allows the inventory of these sets to be added to the catalog
so people can add them to a want list and buy the parts they need to build them.
Since they use mostly common parts, I think many AFOLs would prefer to build
them with the parts in their own collection, and just buy any ones they are missing.
Not only would this generate revenue for Bricklink by increased sales, it would
be an olive branch to the sellers who have been completely excluded from this
promotion.
Bricklink has done so much to build the AFOL community and it has become a verb
within our vocabulary (much like Google has in the general population). It would
be a sad irony if the sets created by Bricklink to celebrate AFOLs cannot be
Bricklinked by AFOLs.
|
From what I understand from reading about these sets, these aren't going
to be officially recognized LEGO sets. If that's the case, I don't feel
like they belong in the catalog. Someone will post the inventory somewhere (from
what I understand, it happens with most popular MOCs), so there is nothing stopping
a buyer from creating their own wanted list and purchase the parts without having
the set in the catalog.
Josh
|
They're still more official than BrickArms, which is also in the catalog...
Plus, the whole "exciting" part about the whole project, according to BL itself,
is the fact that it's an official cooperation with the LEGO Group.
So yes, I definitely see the irony.
|
I objected to adding BrickArms as well, for what it's worth. Fat lot of good
that did
Josh
|
|
Author: | Teup | Posted: | Feb 12, 2019 13:07 | Subject: | Re: Allow AFOLs to "Bricklink" the ADP sets | Viewed: | 52 times | Topic: | Catalog | |
| In Suggestions, mhortar writes:
| In Suggestions, Brick.Door writes:
| There are no plans to do so, but I hope that once the regular sales period is
finished Bricklink allows the inventory of these sets to be added to the catalog
so people can add them to a want list and buy the parts they need to build them.
Since they use mostly common parts, I think many AFOLs would prefer to build
them with the parts in their own collection, and just buy any ones they are missing.
Not only would this generate revenue for Bricklink by increased sales, it would
be an olive branch to the sellers who have been completely excluded from this
promotion.
Bricklink has done so much to build the AFOL community and it has become a verb
within our vocabulary (much like Google has in the general population). It would
be a sad irony if the sets created by Bricklink to celebrate AFOLs cannot be
Bricklinked by AFOLs.
|
From what I understand from reading about these sets, these aren't going
to be officially recognized LEGO sets. If that's the case, I don't feel
like they belong in the catalog. Someone will post the inventory somewhere (from
what I understand, it happens with most popular MOCs), so there is nothing stopping
a buyer from creating their own wanted list and purchase the parts without having
the set in the catalog.
Josh
|
They're still more official than BrickArms, which is also in the catalog...
Plus, the whole "exciting" part about the whole project, according to BL itself,
is the fact that it's an official cooperation with the LEGO Group.
So yes, I definitely see the irony.
|
|
Author: | brikomania | Posted: | Feb 12, 2019 13:06 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 52 times | Topic: | Catalog | |
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
Thank you for the explanations. I agree that some times, or for some people it
can be useful, but i believe that most of the time it isn't. As suggested,
I think that there should be an option to do a general search for wantlists or
in store, choose if you care about variants or not.
Many buyers ask if i have a part, for example, a 1 x 1 with clip, and I do, but
they had the O clip in their wanted lists, and i had the U clip, but they didn't
care for either.
|
|
Author: | mhortar | Posted: | Feb 12, 2019 12:55 | Subject: | Re: Allow AFOLs to "Bricklink" the ADP sets | Viewed: | 52 times | Topic: | Catalog | |
| In Suggestions, Brick.Door writes:
| There are no plans to do so, but I hope that once the regular sales period is
finished Bricklink allows the inventory of these sets to be added to the catalog
so people can add them to a want list and buy the parts they need to build them.
Since they use mostly common parts, I think many AFOLs would prefer to build
them with the parts in their own collection, and just buy any ones they are missing.
Not only would this generate revenue for Bricklink by increased sales, it would
be an olive branch to the sellers who have been completely excluded from this
promotion.
Bricklink has done so much to build the AFOL community and it has become a verb
within our vocabulary (much like Google has in the general population). It would
be a sad irony if the sets created by Bricklink to celebrate AFOLs cannot be
Bricklinked by AFOLs.
|
From what I understand from reading about these sets, these aren't going
to be officially recognized LEGO sets. If that's the case, I don't feel
like they belong in the catalog. Someone will post the inventory somewhere (from
what I understand, it happens with most popular MOCs), so there is nothing stopping
a buyer from creating their own wanted list and purchase the parts without having
the set in the catalog.
Josh
|
|
Author: | Brick.Door | Posted: | Feb 12, 2019 12:46 | Subject: | Allow AFOLs to "Bricklink" the ADP sets | Viewed: | 194 times | Topic: | Catalog | Status: | Open | |
| There are no plans to do so, but I hope that once the regular sales period is
finished Bricklink allows the inventory of these sets to be added to the catalog
so people can add them to a want list and buy the parts they need to build them.
Since they use mostly common parts, I think many AFOLs would prefer to build
them with the parts in their own collection, and just buy any ones they are missing.
Not only would this generate revenue for Bricklink by increased sales, it would
be an olive branch to the sellers who have been completely excluded from this
promotion.
Bricklink has done so much to build the AFOL community and it has become a verb
within our vocabulary (much like Google has in the general population). It would
be a sad irony if the sets created by Bricklink to celebrate AFOLs cannot be
Bricklinked by AFOLs.
|
|
Author: | yorbrick | Posted: | Feb 12, 2019 11:32 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 60 times | Topic: | Catalog | |
| In Catalog, axaday writes:
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
It would be nice if the catalog had the sophistication to have a metapart that
would collect listings of all three in a search if someone really didn't
care which.
|
I guess it does in a way as you can search for "arch 1 x 6 x 2 -curved -pattern"
if you don't care which one you get, but it only really works for searches
and not wants lists. So yes having a metadata tag to link them would be good.
Same for a number of other parts with minor variations that may be inconsequential
for some people but important for others.
|
|
Author: | axaday | Posted: | Feb 12, 2019 10:42 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 69 times | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| In Catalog, axaday writes:
| In Catalog, Hygrotus writes:
| In Catalog, dearlydeparted writes:
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
To me, yes. I have never been able visually to distinguish the difference between
the two without reinforcement - medium think - thin. I just don't see it,
try as I might.
|
You can always check mold number molded on the part's underside, magnifying
glass maybe needed.
|
Or a light piped thingamajig if you happen to be an entomologist (which is kind
of cheating).
I thought about buying an otoscope the other day so I could see the part number
on the giraffe guy's hat. Then I thought that might be a sign of obsession.
|
but I finally was able to read this mold number
|
Cheater
|
|
Author: | Hygrotus | Posted: | Feb 12, 2019 10:36 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 63 times | Topic: | Catalog | |
| In Catalog, axaday writes:
| In Catalog, Hygrotus writes:
| In Catalog, dearlydeparted writes:
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
To me, yes. I have never been able visually to distinguish the difference between
the two without reinforcement - medium think - thin. I just don't see it,
try as I might.
|
You can always check mold number molded on the part's underside, magnifying
glass maybe needed.
|
Or a light piped thingamajig if you happen to be an entomologist (which is kind
of cheating).
I thought about buying an otoscope the other day so I could see the part number
on the giraffe guy's hat. Then I thought that might be a sign of obsession.
|
but I finally was able to read this mold number
|
|
Author: | axaday | Posted: | Feb 12, 2019 10:28 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 66 times | Topic: | Catalog | |
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
It would be nice if the catalog had the sophistication to have a metapart that
would collect listings of all three in a search if someone really didn't
care which.
|
|
Author: | axaday | Posted: | Feb 12, 2019 10:27 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 72 times | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| In Catalog, dearlydeparted writes:
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
To me, yes. I have never been able visually to distinguish the difference between
the two without reinforcement - medium think - thin. I just don't see it,
try as I might.
|
You can always check mold number molded on the part's underside, magnifying
glass maybe needed.
|
Or a light piped thingamajig if you happen to be an entomologist (which is kind
of cheating).
I thought about buying an otoscope the other day so I could see the part number
on the giraffe guy's hat. Then I thought that might be a sign of obsession.
|
|
Author: | randyf | Posted: | Feb 12, 2019 08:38 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 88 times | Topic: | Catalog | |
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
There is a reason for the multiple entries, and that reason is because LEGO made
three variations of that part with different purposes in mind for each one. Some
of the builds that use one variation of the arch cannot be built using either
of the other two.
Cheers,
Randy
|
|
Author: | Hygrotus | Posted: | Feb 12, 2019 08:08 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 85 times | Topic: | Catalog | |
| In Catalog, dearlydeparted writes:
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
To me, yes. I have never been able visually to distinguish the difference between
the two without reinforcement - medium think - thin. I just don't see it,
try as I might.
|
You can always check mold number molded on the part's underside, magnifying
glass maybe needed.
|
|
Author: | dearlydeparted | Posted: | Feb 12, 2019 08:02 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 90 times | Topic: | Catalog | |
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
To me, yes. I have never been able visually to distinguish the difference between
the two without reinforcement - medium think - thin. I just don't see it,
try as I might.
|
|
Author: | SylvainLS | Posted: | Feb 12, 2019 07:48 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 83 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
|
|
Three variants. Don’t exaggerate, you’re showing them
* | | 3307 Arch 1 x 6 x 2 - Thick Top with Reinforced Underside Parts: Arch |
* | | 15254 Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside Parts: Arch |
* | | 12939 Arch 1 x 6 x 2 - Thin Top without Reinforced Underside Parts: Arch |
| | I get the raised arch difference, that is notable, but this thin/thick thing?
|
The thin / thick thing is described in the notes, and mm dimensions given. Personally,
the difference between the old and new style (with/without the reinforcement)
is enough, but I I can understand why the different variants are there.
|
Yes, the variants are important:
1. You can fit some parts under the thin and medium thick parts that you can’t
fit under the thick one. E.g.
2. Collectors find it very important to get the right variant.
The odd part here would be the thin one: it was short lived (a year). Too fragile?
Too thin (it leaves a noticeable gap)?
Anyway, it’s here and came before the medium thick and was already in the catalogue
(2013) when the medium thick version was spotted / included in the catalogue
(2016).
There was no reason to merge thin and medium thick then and there’s no much reason
to do it now as we would still need to keep the old one.
Wouldn’t it be as confusing to have a “thick” version and “more or less thin”
one?
|
|
Author: | yorbrick | Posted: | Feb 12, 2019 06:34 | Subject: | Re: Aren't these differences ridiculous? | Viewed: | 94 times | Topic: | Catalog | |
| In Catalog, brikomania writes:
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
The thin / thick thing is described in the notes, and mm dimensions given. Personally,
the difference between the old and new style (with/without the reinforcement)
is enough, but I I can understand why the different variants are there.
|
|
Author: | brikomania | Posted: | Feb 12, 2019 06:29 | Subject: | Aren't these differences ridiculous? | Viewed: | 329 times | Topic: | Catalog | Status: | Open | |
| I really like the extensive catalog, and think that most of the differences (like
the jumpers or tiles with groove, etc) are really useful.
But when you get to things like this, with a 1 x 2 x 6 arch, having something
like 4 variants, doesn't it make it too hard for sellers AND buyers?
I get the raised arch difference, that is notable, but this thin/thick thing?
|
|
|
Author: | palenjo | Posted: | Feb 11, 2019 16:27 | Subject: | Inventory Change Request for Set 341-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 445a Blue Door 1 x 3 x 4 Left with Thin Handle (Alternate)
* Add 4 Part 446a Blue Door 1 x 3 x 4 Right with Thin Handle (Alternate)
Comments from Submitter:
I only want to add 445a and 446a as alternative part. If you look at the instructions and the box it could very well be the door with thin handle. Since you don't have 445a and 446a as a part in any inventory list, I cannot find the item id. This would affect all sets with doors 3188, 3189, 3195, 3194, 445 and 446, to have the door with thin handle as alternative. Regards, Johan
|
|
Author: | randyf | Posted: | Feb 11, 2019 01:14 | Subject: | Inventory Change Request for Set 20017-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4085d Black Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) (Alternate) (match ID 1)
* Change 2 Part Black 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) {match ID 0 to 1}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
From sealed set contents. I got one each of 4085b and 4085d.
|
|
Author: | weporter | Posted: | Feb 10, 2019 18:44 | Subject: | Inventory Change Request for Set 6842-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3040 White Slope 45 2 x 1 (Alternate) (match ID 3)
Comments from Submitter:
As per my recent submission re: 3943b, I also note that in my two sets the 45 2x1 slopes have bottom tubes (3040). Again, with the last known use of 3040a being 1981, and the earliest use of 3040 being 1977, it makes sense that later production runs of 6842 which had low attachment modified plates and axle hole cones would also have 3040.
|
|
Author: | OLarsen | Posted: | Feb 10, 2019 16:03 | Subject: | Inventory Change Request for Set 5875-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4150pb071 White Tile, Round 2 x 2 with Tomato, Cheese and Cucumber Pattern (Sticker) - Sets 5875 / 5876 (Counterpart)
Comments from Submitter:
This set is the same as 5876, and this part is a counterpart in both.
|
|
Author: | weporter | Posted: | Feb 10, 2019 15:29 | Subject: | Inventory Change Request for Set 6842-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3943b Black Cone 4 x 4 x 2 with Axle Hole (Alternate) (match ID 2)
Comments from Submitter:
I had a pair of these since childhood and recently disassembled and bagged them for storage. Both had the axle hole version of the large cones, which is corroborated in terms of timeline by the already confirmed existence in 6890 and 6929. Both sets also contained 3839b, which implies they were from a later production run.
|
|
Author: | Brickitty | Posted: | Feb 10, 2019 13:10 | Subject: | Re: Minifigure, Utensil Tool Screwdriver - Narrow | Viewed: | 42 times | Topic: | Catalog | |
| In Catalog, stecre writes:
| Why is this part so expensive in DBG??
|
The long answer:
It only came out in 2005, and for all intents and purposes, the only fully-distributed
set it was in was 7251 Darth Vader Transformation. Until Lego released an updated
version of that in 2017, it was a fairly high-demand set because that scene in
Revenge of the Sith is iconic. But sets released in 2004-2005 typically had short
shelf lives because of Lego's color transformation and changes in the company.
So higher demand + lower supply = a fairly expensive set -- it still averages
$28 for 53 pieces, or $0.53/piece, and I remember seeing it go for $35-$40
a few years back. Since there are very few exclusive parts in the set besides
the figs, the few exclusive/rare parts get priced up extremely high, likely because
of people trying to Bricklink the set.
|
|
Author: | Killermike | Posted: | Feb 10, 2019 13:01 | Subject: | Re: Minifigure, Utensil Tool Screwdriver - Narrow | Viewed: | 31 times | Topic: | Catalog | |
| Only available in 3 sets, of which one is an exclusive.
Basic Supply and Demand, I should think
|
Author: | stecre | Posted: | Feb 10, 2019 12:41 | Subject: | Minifigure, Utensil Tool Screwdriver - Narrow | Viewed: | 88 times | Topic: | Catalog | Status: | Open | |
| Why is this part so expensive in DBG??
|
|
Author: | OLarsen | Posted: | Feb 10, 2019 04:40 | Subject: | Re: Inventory Change Request for Set 5895-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| There is a black haired one on eBay right now.
|
You do know you can post the auction number, right?
(Hint, hint...poke, poke...nudge, nudge)
|
|
You can't post the link, just the item number. (202504481665)
Your post is going to be canceled.
|
Thanks.I am new at this. I have now instead tried to add the minifig with brown
hair as a new item (belvmale21). I hope I will have better luck with that. If
there is one with black hair on ebay, you must be right that both versions
exist.
|
|
Author: | bje | Posted: | Feb 10, 2019 03:21 | Subject: | Inventory Change Request for Set 31075-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 5 Part 55982c05 Light Bluish Gray Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes with Black Tire 30.4 x 14 Offset Tread Band Around Center of Tread (55982 / 92402) (Counterpart)
* Add 1 Part 2584c003 Black String Reel 2 x 2 Complete without String with Light Bluish Gray Drum (Counterpart)
Comments from Submitter:
From new set parted out
|
|
Author: | randyf | Posted: | Feb 10, 2019 01:05 | Subject: | Inventory Change Request for Set 9461-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Brown {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version) to 4497 Minifigure, Weapon Pike / Spear - Round End}
Comments from Submitter:
From contents of personal collection that was originally a sealed set.
|
|
Author: | axaday | Posted: | Feb 9, 2019 23:02 | Subject: | Inventory Change Request for Set 71042-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part Black 2530 Minifigure, Weapon Sword, Cutlass (Extra)
* Change {1 to 2} Part Dark Bluish Gray 2530 Minifigure, Weapon Sword, Cutlass (Extra)
Comments from Submitter:
I'm aware that I've personally verified this inventory before... But this time there were two extras of each cutlass.
|
|
Author: | Brixalotl | Posted: | Feb 9, 2019 21:31 | Subject: | Inventory Change Request for Set 70614-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 8 Part 44567 Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type)
* Add 8 Part 44567b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove
* Delete 10 Part 44567 Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type)
* Add 10 Part 44567b Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove
Comments from Submitter:
confirmed during part out, thanks
|
|
Author: | randyf | Posted: | Feb 9, 2019 17:08 | Subject: | Re: Inventory Change Request for Set 5846-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, OLarsen writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, OLarsen writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, OLarsen writes:
| Please make changes to the following inventory:
* Add 1 Part 3030 Bright Green Plate 4 x 10 (Alternate)
|
What is your source for requesting this change?
Thanks,
Randy
|
I have now had tree sets where this plate were "bright green". When I google
I can find pictures of more sets like mine.
Thanks
Anne
|
To make changes like this, I need to have convincing evidence, since the inventories
were originally submitted to BrickLink by a prior Inventory Administrator.
Were all of your sets purchased new by you or used? If they were new, did
you build the sets yourself and have the pieces of them always remained separate
from other sets?
Cheers,
Randy
|
My sets were purchased used - so I have no proof as such. Sorry.
If I google for pictures of this set, I get approximately 50% with this plate
in green and 50% with bright green. My sets have the bright green tile - but
in theory they could have been replaced.
|
Thank you for responding to my PM so quickly!
Yep, that is what I was finding as far as used sets, also. Unfortunately, I can't
really say for sure if this was a true alternate or not. It feels to me like
it easily could have been, but I don't want to change the inventory based
on just a feeling. Hopefully, someone with better evidence will come along eventually.
For now, I will have to reject this request.
Thanks for your time,
Randy
|
|
Author: | randyf | Posted: | Feb 9, 2019 16:46 | Subject: | Re: Inventory Change Request for Set 988-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, namraah writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, namraah writes:
| Please make changes to the following inventory:
* Change {1 to 2} Part White 3005ptFb Brick 1 x 1 with Blue 'F' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptIb Brick 1 x 1 with Blue 'I' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptJb Brick 1 x 1 with Blue 'J' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptOb Brick 1 x 1 with Blue 'O' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptPb Brick 1 x 1 with Blue 'P' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptTb Brick 1 x 1 with Blue 'T' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptUb Brick 1 x 1 with Blue 'U' Pattern (Bold Font)
|
What is your source for making this request?
Thanks,
Randy
|
I got a new set, opened, but complete with this number off bricks. For example
with this changes this set will have the same number off bricks as set 987 (numbers,
52 parts)
|
Thank you for responding so quickly to my PM!
This is exactly what I needed to know.
Cheers,
Randy
|
|
Author: | OLarsen | Posted: | Feb 9, 2019 16:34 | Subject: | Re: Inventory Change Request for Set 5846-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, OLarsen writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, OLarsen writes:
| Please make changes to the following inventory:
* Add 1 Part 3030 Bright Green Plate 4 x 10 (Alternate)
|
What is your source for requesting this change?
Thanks,
Randy
|
I have now had tree sets where this plate were "bright green". When I google
I can find pictures of more sets like mine.
Thanks
Anne
|
To make changes like this, I need to have convincing evidence, since the inventories
were originally submitted to BrickLink by a prior Inventory Administrator.
Were all of your sets purchased new by you or used? If they were new, did
you build the sets yourself and have the pieces of them always remained separate
from other sets?
Cheers,
Randy
|
My sets were purchased used - so I have no proof as such. Sorry.
If I google for pictures of this set, I get approximately 50% with this plate
in green and 50% with bright green. My sets have the bright green tile - but
in theory they could have been replaced.
|
|
Author: | namraah | Posted: | Feb 9, 2019 16:28 | Subject: | Re: Inventory Change Request for Set 988-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, namraah writes:
| Please make changes to the following inventory:
* Change {1 to 2} Part White 3005ptFb Brick 1 x 1 with Blue 'F' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptIb Brick 1 x 1 with Blue 'I' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptJb Brick 1 x 1 with Blue 'J' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptOb Brick 1 x 1 with Blue 'O' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptPb Brick 1 x 1 with Blue 'P' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptTb Brick 1 x 1 with Blue 'T' Pattern (Bold Font)
* Change {1 to 2} Part White 3005ptUb Brick 1 x 1 with Blue 'U' Pattern (Bold Font)
|
What is your source for making this request?
Thanks,
Randy
|
I got a new set, opened, but complete with this number off bricks. For example
with this changes this set will have the same number off bricks as set 987 (numbers,
52 parts)
|
|
Author: | randyf | Posted: | Feb 9, 2019 16:05 | Subject: | Re: Inventory Change Request for Set 42029-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, A.Lukinov writes:
| Please make changes to the following inventory:
* Add 2 Part 3068bpb1039 Black Tile 2 x 2 with Vehicle Mirror Rounded Corners Pattern (Sticker) - Set 42053 (Counterpart)
Comments from Submitter:
Black 2x2 tiles with silver mirror sticker and black dotted reflection waves. No frames, rounded corners.
|
The stickers in set 42029 are different from the ones in set 42053.
This request will be rejected.
Randy
|
Author: | randyf | Posted: | Feb 9, 2019 15:49 | Subject: | Re: Why? | Viewed: | 75 times | Topic: | Catalog | |
| In Catalog, SgtPepper writes:
They probably listed them for sale before the inventory was completed. If they
were asked to move them to the correct entries that are now in the catalog, they
probably would.
Randy
|
Author: | randyf | Posted: | Feb 9, 2019 14:44 | Subject: | Re: Inventory Change Request for Minifig rsq004 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| In Inventories Requests, jaspervries writes:
| Please make changes to the following inventory:
* Change 1 Part {Trans-Light Blue to Trans-Dark Blue} 2447 Minifigure, Visor Standard
|
We now have three new entries to solve this problem:
|
Cool beans! I will get the inventories squared away.
Randy
|
|
Author: | Brixalotl | Posted: | Feb 9, 2019 14:40 | Subject: | Inventory Change Request for Set 70505-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 21459 Black Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 4)
* Add 4 Part 15571 Black Slope 45 2 x 1 Triple with Bottom Stud Holder (Alternate) (match ID 5)
* Add 2 Part 17114 Dark Bluish Gray Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 6)
* Add 1 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 7)
* Add 1 Part 14769 Pearl Gold Tile, Round 2 x 2 with Bottom Stud Holder (Alternate) (match ID 8)
* Delete 1 Part 4497u Flat Silver Minifigure, Weapon Pike / Spear - Undetermined End Version)
* Add 1 Part 93789 Flat Silver Minifigure, Weapon Pike / Spear - Flat End
* Change 1 Part Black 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 4}
* Change 4 Part Black 3048c Slope 45 2 x 1 Triple with Inside Bar {match ID 0 to 5}
* Change 2 Part Dark Bluish Gray 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 6}
* Change 1 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 7}
* Change 1 Part Pearl Gold 4150 Tile, Round 2 x 2 {match ID 0 to 8}
Comments from Submitter:
confirmed during part out, thanks
|
|
Author: | Admin_Russell | Posted: | Feb 9, 2019 14:36 | Subject: | Re: Inventory Change Request for Minifig rsq004 | Viewed: | 35 times | Topic: | Inventories Requests | |
| In Inventories Requests, jaspervries writes:
| Please make changes to the following inventory:
* Change 1 Part {Trans-Light Blue to Trans-Dark Blue} 2447 Minifigure, Visor Standard
|
We now have three new entries to solve this problem:
|
|
Author: | A.Lukinov | Posted: | Feb 9, 2019 14:14 | Subject: | Inventory Change Request for Set 42029-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3068bpb1039 Black Tile 2 x 2 with Vehicle Mirror Rounded Corners Pattern (Sticker) - Set 42053 (Counterpart)
Comments from Submitter:
Black 2x2 tiles with silver mirror sticker and black dotted reflection waves. No frames, rounded corners.
|
|
Author: | Brixalotl | Posted: | Feb 9, 2019 12:18 | Subject: | Inventory Change Request for Set 70736-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 30173b Yellowish Green Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt (Alternate) (match ID 2)
* Change 4 Part Yellowish Green 21459 Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade {match ID 0 to 2}
Comments from Submitter:
confirmed during part out, thanks
|
|
Author: | tEoS | Posted: | Feb 8, 2019 23:43 | Subject: | Re: Please approve, in hand | Viewed: | 58 times | Topic: | Catalog | |
| I just noticed that these sets require a Target credit card to purchase.
From this point on I will make an extra effort to ensure that I purchase in a
manner that limits the direct benefit to TLC. All these exclusives seem to do
is create a rift in their loyal fan base. They end up solely in the 2nd hand
market at inflated prices.
In Catalog, starbeanie writes:
| Sweet Mayhem and Benny will be limited also.
|
|
Author: | Brixalotl | Posted: | Feb 8, 2019 21:20 | Subject: | Inventory Change Request for Set 70504-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 44301 White Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type)
* Add 2 Part 44301b White Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove
Comments from Submitter:
confirmed during part out, thanks
|
|
Author: | Dalika | Posted: | Feb 8, 2019 17:14 | Subject: | Re: Please approve, in hand | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog, Dalika writes:
| In Catalog, starbeanie writes:
| Sweet Mayhem and Benny will be limited also.
|
It looks like Sweet Mayhem will be, or is @ Target. It looks like a RedCard
exclusive? Haven't seen Benny yet.
|
Edit: Benny is @ Target as well.
|
|
In Catalog, yorbrick writes:
| In Catalog, Rakali writes:
| In Catalog, tEoS writes:
| I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
I'm hoping they do release worldwide, and not limited. It would be stupid
not to. If they don't release Emmet and Wyldstyle, then there is no point
in wider releases of Sweet Mayhem and Benny.
|
|
|
|
|
Author: | Dalika | Posted: | Feb 8, 2019 17:12 | Subject: | Re: Please approve, in hand | Viewed: | 31 times | Topic: | Catalog | |
| In Catalog, starbeanie writes:
| Sweet Mayhem and Benny will be limited also.
|
It looks like Sweet Mayhem will be, or is @ Target. It looks like a RedCard
exclusive? Haven't seen Benny yet.
|
In Catalog, yorbrick writes:
| In Catalog, Rakali writes:
| In Catalog, tEoS writes:
| I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
I'm hoping they do release worldwide, and not limited. It would be stupid
not to. If they don't release Emmet and Wyldstyle, then there is no point
in wider releases of Sweet Mayhem and Benny.
|
|
|
|
Author: | yoavheskia | Posted: | Feb 8, 2019 16:41 | Subject: | Re: Please help identify color | Viewed: | 85 times | Topic: | Colors | |
| Hi
How many colors do you have until now?
You have warm yellowish orange bricks or parts for sale (like the 2 1x2 plates
in your photo)? you have the 2x4 brick in that color?
Your photoes is excellent! You use special equipment & lighting?
If you can take a photo of all your 2x4 orange bricks it will be great, thanks!
I'm adding your warm yellowish orange picture with my light orange brick.
It doesn't seem to match at all. By the way the brick I added to your picture:
i scan the brick with my scanner- i didn't use a camera- so i guess the color
you see is the actual color!
Another & last question: You have maybe 3001 bricks for trade? i'm looking
for several colors i didn't get from b.l, my only source that i have so far
(israel is not a good location for lego fans). the colors is: flat silver, dark
flesh, trans bright green & trans black.
thanks for the help!
Yoav
|
|
|
Author: | starbeanie | Posted: | Feb 8, 2019 16:36 | Subject: | Re: Please approve, in hand | Viewed: | 37 times | Topic: | Catalog | |
| Sweet Mayhem and Benny will be limited also.
In Catalog, yorbrick writes:
| In Catalog, Rakali writes:
| In Catalog, tEoS writes:
| I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
I'm hoping they do release worldwide, and not limited. It would be stupid
not to. If they don't release Emmet and Wyldstyle, then there is no point
in wider releases of Sweet Mayhem and Benny.
|
|
|
Author: | koost | Posted: | Feb 8, 2019 13:09 | Subject: | Inventory Change Request for Set 6451-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4592c03 Black Lever Small Base with Light Gray Lever (Extra)
* Add 1 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
|
|
Author: | randyf | Posted: | Feb 8, 2019 13:00 | Subject: | Re: Inventory Change Request for Book B100 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, FreeStorm writes:
| [joke mode=on]
WHATTT!!! You didn't buy a sealed set to complete the catalog???
I hopped you are going to buy a sealed set every time the catalog needed
[joke mode=off]
|
You would think so, right?!?
Actually, I do not mind buying sealed sets for verifying the catalog when I want
them in my collection and the price is reasonable. For this one, the price was
reasonable, but I just didn't want it!
| This time I made the compulsive buy, I hope it will arrive sealed
|
Very nice! Your commitment is commendable!
Randy
|
|
Author: | Brixalotl | Posted: | Feb 8, 2019 12:46 | Subject: | Inventory Change Request for Set 70500-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Bluish Gray Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 2)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 3)
* Add 3 Part 14769 Pearl Gold Tile, Round 2 x 2 with Bottom Stud Holder (Alternate) (match ID 4)
* Change 1 Part Dark Bluish Gray 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 2}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 3}
* Change 3 Part Pearl Gold 4150 Tile, Round 2 x 2 {match ID 0 to 4}
Comments from Submitter:
confirmed during part out, thanks
|
|
Author: | yoavheskia | Posted: | Feb 8, 2019 11:20 | Subject: | Re: Please help identify color | Viewed: | 37 times | Topic: | Colors | |
| In Colors, pikachu3 writes:
| In Colors, yoavheskia writes:
| In Colors, WoutR writes:
| In Colors, yoavheskia writes:
| Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
So maybe this is the 73rd color?!?
|
Are the two 1x2 bricks different colors? They look a little off in my screen.
If they aren't the same color, then it looks like the left one is Medium
Yellowish Orange and the right one (and the 2x4) is Warm Yellowish Orange.
|
Yes. the 1x2 bricks is not in the same color.
the right 1x2 is "light orange" (b.l name) the left 1x2 is the common now days
"bright light orange" (b.l name)
i'm sure that the brick i have is not bright light orange, not medium orange
and not very light orange. i'm almost sure the color is Medium Yellowish
Orange. it looks perfect when i add it to your picture (by the way- great job-
it realy helps me to get by with all the millions colors out there).
|
|
|
Author: | Brixalotl | Posted: | Feb 8, 2019 10:39 | Subject: | Inventory Change Request for Set 70227-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44567 Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type)
* Add 1 Part 44567a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove
Comments from Submitter:
confirmed during part out, thanks
|
|
Author: | pikachu3 | Posted: | Feb 8, 2019 10:19 | Subject: | Re: Please help identify color | Viewed: | 37 times | Topic: | Colors | |
| In Colors, yoavheskia writes:
| In Colors, WoutR writes:
| In Colors, yoavheskia writes:
| Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
So maybe this is the 73rd color?!?
|
Are the two 1x2 bricks different colors? They look a little off in my screen.
If they aren't the same color, then it looks like the left one is Medium
Yellowish Orange and the right one (and the 2x4) is Warm Yellowish Orange.
|
|
Author: | pikachu3 | Posted: | Feb 8, 2019 10:16 | Subject: | Re: Please help identify color | Viewed: | 42 times | Topic: | Colors | |
| In Colors, yoavheskia writes:
| I think the 2x4 brick is really light orange , but it's not warm yellowish
orange (color no. 225). the corect color is Medium Yellowish Orange (color no.
121). it's defently not Flame Yellowish Orange (color no.191)
I'm looking for a 3001 master who can tell the exact color.
|
Those are my pictures Medium Yellowish Orange and Warm Yellowish Orange are
very close, so it's hard to compare photos taken in different lighting conditions.
Your best bet is to find a part you *know* is Medium Yellowish Orange and compare
in person. I can take a comparison pic of the oranges I have, if it will help.
Yes, I think my modern 3001 collection is the largest, but Medium Yellowish Orange
is one I'm missing. (There may also be a Pearl Gold, but I haven't seen
any in the wild yet.)
|
|
Author: | yoavheskia | Posted: | Feb 8, 2019 07:38 | Subject: | Re: Please help identify color | Viewed: | 45 times | Topic: | Colors | |
| In Colors, WoutR writes:
| In Colors, yoavheskia writes:
| Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
So maybe this is the 73rd color?!?
|
|
|
Author: | FreeStorm | Posted: | Feb 8, 2019 07:19 | Subject: | Re: Inventory Change Request for Book B100 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, JayEssBee writes:
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5
Comments from Submitter:
This item is shown in a photo in the Klutz book of each of the included parts and is labeled "huge rubber band." (See Bricklink image of Item B100)
|
The part you are trying to add is much smaller than the huge rubber band in this
book. In fact, it is not a rubber band at all. It's a rubber belt.
There is a note at the bottom of the inventory page for this book which states:
"Incomplete. Missing huge rubber band shown on parts list."
Upon looking, this huge rubber band is not in the BrickLink catalog, so the inventory
for now will remain incomplete.
This request will be rejected.
Randy
|
Randyy
[joke mode=on]
WHATTT!!! You didn't buy a sealed set to complete the catalog???
I hopped you are going to buy a sealed set every time the catalog needed
[joke mode=off]
This time I made the compulsive buy, I hope it will arrive sealed
-Fred
|
|
Author: | yorbrick | Posted: | Feb 8, 2019 04:19 | Subject: | Re: Please approve, in hand | Viewed: | 63 times | Topic: | Catalog | |
| In Catalog, Rakali writes:
| In Catalog, tEoS writes:
| I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
I'm hoping they do release worldwide, and not limited. It would be stupid
not to. If they don't release Emmet and Wyldstyle, then there is no point
in wider releases of Sweet Mayhem and Benny.
|
|
Author: | SteinchendeaIer | Posted: | Feb 8, 2019 02:25 | Subject: | Problem with new Sticker Items | Viewed: | 121 times | Topic: | Catalog | Status: | Open | |
| Hello everybody,
I have created a part with stickers that are not yet in my catalog and a new
minifigure that is currently available in Germany directly in the store to buy
Nothing has been released so far, so I wanted to ask if I did something wrong?
greeting
Florian
|
|
|
Author: | Rakali | Posted: | Feb 7, 2019 23:13 | Subject: | Re: Please approve, in hand | Viewed: | 94 times | Topic: | Catalog | |
| In Catalog, tEoS writes:
| I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
|
Author: | randyf | Posted: | Feb 7, 2019 22:46 | Subject: | Re: Inventory Change Request for Book B100 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, JayEssBee writes:
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5
Comments from Submitter:
This item is shown in a photo in the Klutz book of each of the included parts and is labeled "huge rubber band." (See Bricklink image of Item B100)
|
The part you are trying to add is much smaller than the huge rubber band in this
book. In fact, it is not a rubber band at all. It's a rubber belt.
There is a note at the bottom of the inventory page for this book which states:
"Incomplete. Missing huge rubber band shown on parts list."
Upon looking, this huge rubber band is not in the BrickLink catalog, so the inventory
for now will remain incomplete.
This request will be rejected.
Randy
|
|
Author: | tEoS | Posted: | Feb 7, 2019 21:08 | Subject: | Re: Please approve, in hand | Viewed: | 81 times | Topic: | Catalog | |
| I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
In Catalog, Dalika writes:
| In Catalog Requests, speshy writes:
| Are those the limited edition brickheadz? Got any pics?
K
|
I saw them and thought they were WM exclusives.
|
In Catalog Requests, starbeanie writes:
| Please approve. I received them today.
Thanks.
|
|
|
|
|
Author: | starbeanie | Posted: | Feb 7, 2019 19:37 | Subject: | Re: Please approve, in hand | Viewed: | 68 times | Topic: | Catalog | |
| My phone wont take a pic small enough to upload!!!
In Catalog, speshy writes:
| Are those the limited edition brickheadz? Got any pics?
K
In Catalog Requests, starbeanie writes:
| Please approve. I received them today.
Thanks.
|
|
|
Author: | Dalika | Posted: | Feb 7, 2019 18:15 | Subject: | Re: Please approve, in hand | Viewed: | 73 times | Topic: | Catalog | |
| In Catalog Requests, speshy writes:
| Are those the limited edition brickheadz? Got any pics?
K
|
I saw them and thought they were WM exclusives.
|
In Catalog Requests, starbeanie writes:
| Please approve. I received them today.
Thanks.
|
|
|
|
Author: | starbeanie | Posted: | Feb 7, 2019 18:05 | Subject: | Re: Please approve, in hand | Viewed: | 62 times | Topic: | Catalog | |
| Limited to 5000. So, not exactly rare. I can post pics in a bit. Out at dinner
now.
In Catalog Requests, speshy writes:
| Are those the limited edition brickheadz? Got any pics?
K
In Catalog Requests, starbeanie writes:
| Please approve. I received them today.
Thanks.
|
|
|
Author: | speshy | Posted: | Feb 7, 2019 17:57 | Subject: | Re: Please approve, in hand | Viewed: | 66 times | Topic: | Catalog | |
| Are those the limited edition brickheadz? Got any pics?
K
In Catalog Requests, starbeanie writes:
| Please approve. I received them today.
Thanks.
|
|
Author: | starbeanie | Posted: | Feb 7, 2019 17:34 | Subject: | Please approve, in hand | Viewed: | 206 times | Topic: | Catalog | Status: | Open | |
| Please approve. I received them today.
Thanks.
|
Author: | WoutR | Posted: | Feb 7, 2019 17:25 | Subject: | Re: Please help identify color | Viewed: | 34 times | Topic: | Colors | |
| In Colors, yoavheskia writes:
| Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
|
Author: | Adjour | Posted: | Feb 7, 2019 15:57 | Subject: | Re: 5987 Instructions | Viewed: | 19 times | Topic: | Catalog | |
| In Catalog, baylit writes:
| It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
I encounter this occasionally, I just make a note in the description. I do think
however that images and notes should be added to the catalog.
I've also seen pictures of "instructions" that are likely just images of
the box art (shape is wrong etc)
|
|
Author: | JayEssBee | Posted: | Feb 7, 2019 15:41 | Subject: | Inventory Change Request for Book B100 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5
Comments from Submitter:
This item is shown in a photo in the Klutz book of each of the included parts and is labeled "huge rubber band." (See Bricklink image of Item B100)
|
Author: | yoavheskia | Posted: | Feb 7, 2019 15:22 | Subject: | Re: Please help identify color | Viewed: | 52 times | Topic: | Colors | |
| Thank you!
You are the man behind the list? I didn't know that. great work!
|
Author: | Biglesdug | Posted: | Feb 7, 2019 14:36 | Subject: | Re: Inventory Change Request for Minifig tls095 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Biglesdug writes:
| Randy I upload a photo of the correct tan pants for that figure. I'm not
sure if I should of entered it as the same part number (print looks the same)
or as a new part number?
|
Same part number, just different color.
Cheers,
Randy
|
ok its there as well as a new picture to use for the torso of that figure.
|
|
Author: | moreshelfspace | Posted: | Feb 7, 2019 13:52 | Subject: | Re: Standardize name for belt with ammunition | Viewed: | 33 times | Topic: | Catalog | |
| Awesome, thank you!
In Catalog, randyf writes:
| In Catalog, kurotakajo writes:
| Some torsos have "ammunition belt" in their description and others "bandolier".
My personal vote is "ammunition belt". It makes it difficult to find a torso
in the catalog when you don't know the character or theme.
For example: "Torso Pharaoh's Quest Tan Waistcoat, White Shirt, Bandolier
and Silver Buckle Pattern (Jake Raines) / Tan Arms / Yellow Hands" (973pb0781c01)
"Torso Monster Fighters with Ammunition Belt Pattern / Dark Tan Arms / Yellow
Hands" (973pb1113c01)
These two items are similar-looking.
|
You can submit any name change you would like using the following form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The catalog admins will then decide whether the change will be accepted or not.
Cheers,
Randy
|
|
|
Author: | yoavheskia | Posted: | Feb 7, 2019 08:01 | Subject: | Re: Help to identify this color | Viewed: | 57 times | Topic: | Colors | |
| Maybe it's Medium Yellowish Orange (color id 121)? |
|
Author: | randyf | Posted: | Feb 6, 2019 22:52 | Subject: | Re: NJO399 and NJO410 | Viewed: | 27 times | Topic: | Catalog | |
| In Catalog, Crafteewon writes:
| In Catalog, randyf writes:
| In Catalog, Crafteewon writes:
| In Catalog, Crafteewon writes:
| NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
Type [m = njo399] and [m = njo410] without the spaces around the
equal signs.
Cheers,
Randy
|
Thank you.
|
I think you meant to put this one:
|
|
Author: | baylit | Posted: | Feb 6, 2019 22:27 | Subject: | Re: 5987 Instructions | Viewed: | 22 times | Topic: | Catalog | |
| I didn't take a picture but the back side is similarly rotated differently
for each version
In Catalog, tEoS writes:
| Interesting find. I have the "landscape" print version and can confirm that
the opposite side is not the "portrait" print side you've shown.
In Catalog, baylit writes:
| It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
|
|
Author: | baylit | Posted: | Feb 6, 2019 22:26 | Subject: | Re: 5987 Instructions | Viewed: | 23 times | Topic: | Catalog | |
| I didn't take a picture, but the reverse are similarly rotated differently
In Catalog, tEoS writes:
| Interesting find. I have the "landscape" print version and can confirm that
the opposite side is not the "portrait" print side you've shown.
In Catalog, baylit writes:
| It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
|
|
Author: | Crafteewon | Posted: | Feb 6, 2019 22:15 | Subject: | Re: NJO399 and NJO410 | Viewed: | 24 times | Topic: | Catalog | |
| In Catalog, randyf writes:
| In Catalog, Crafteewon writes:
| In Catalog, Crafteewon writes:
| NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
Type [m = njo399] and [m = njo410] without the spaces around the
equal signs.
Cheers,
Randy
|
Thank you.
|
|
Author: | tEoS | Posted: | Feb 6, 2019 22:13 | Subject: | Re: 5987 Instructions | Viewed: | 25 times | Topic: | Catalog | |
| Interesting find. I have the "landscape" print version and can confirm that
the opposite side is not the "portrait" print side you've shown.
In Catalog, baylit writes:
| It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
|
Author: | randyf | Posted: | Feb 6, 2019 22:03 | Subject: | Re: NJO399 and NJO410 | Viewed: | 25 times | Topic: | Catalog | |
| In Catalog, Crafteewon writes:
| In Catalog, Crafteewon writes:
| NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
Type [m = njo399] and [m = njo410] without the spaces around the
equal signs.
Cheers,
Randy
|
|
Author: | baylit | Posted: | Feb 6, 2019 21:54 | Subject: | 5987 Instructions | Viewed: | 65 times | Topic: | Catalog | Status: | Open | |
| It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
Author: | Crafteewon | Posted: | Feb 6, 2019 21:52 | Subject: | Re: NJO399 and NJO410 | Viewed: | 14 times | Topic: | Catalog | |
| In Catalog, Crafteewon writes:
| NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
|
Author: | Crafteewon | Posted: | Feb 6, 2019 21:43 | Subject: | NJO399 and NJO410 | Viewed: | 68 times | Topic: | Catalog | Status: | Open | |
| NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Author: | randyf | Posted: | Feb 6, 2019 21:01 | Subject: | Re: Inventory Change Request for Minifig tls095 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, Biglesdug writes:
| Randy I upload a photo of the correct tan pants for that figure. I'm not
sure if I should of entered it as the same part number (print looks the same)
or as a new part number?
|
Same part number, just different color.
Cheers,
Randy
|
|
Author: | MidwestBrick | Posted: | Feb 6, 2019 17:05 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 40 times | Topic: | Suggestions | |
| In Suggestions, runner.caller writes:
| In Suggestions, MidwestBrick writes:
| In Suggestions, JusTiCe8 writes:
| Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
The other site that has various categories of Used was the #1 reason I will never
use it, unless BL goes away. I do not want to have to make my judgment call
and "hope" that the buyer has the same judgment call on what category of "used"
I selected.
Here is my advice when buying Used. Buy from various sources, when you find
a source that sells you crap compared to others... don't buy from the crap
store anymore and continue buying from the stores that treat you well. For example,
a large % of my Used pieces I am confident I could put down "like-new" and maybe
even sell them as "new" and no one would know the difference. I surely don't
do that but I'm trying to make a point. I don't make too many comments
on Used Items because it isn't necessary. Buyers that purchase from me multiple
times know what to expect, that a large percentage of Used items will be in good-great
condition unless I did make a notation about a specific dent, scratch, etc...
but didn't want to toss the piece as it has value to it, however, still have
the notation that it any piece is Used and could have been played with.
I don't think we need any Buyer Rating system either. This will only cause
uproar when our opinions are ever so slightly different.
Each Store can make their own process as they see fit. I have no issue with anyone
taking the time to do this. I certainly do not have the time to "judge" every
piece though. It would literally be sorting everything once which takes long
enough, and then sorting them all again and instead of having 2 main locations
for items stored (new and used) you would need 4 or 5 or who knows how many to
make sure you are pulling from the correct drawer, bag or akro-mill slot, etc...
There is Positive, Neutral and Negative Feedback available if, as a buyer, anyone
does not agree with what they received from what they purchased.
I understand your argument but I, and I assume many others here, do not have
another 4-8 hours per day to put into subjective scoring. Thanks
|
+1
|
Thank you, I appreciate that.
|
|
Author: | runner.caller | Posted: | Feb 6, 2019 16:39 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 22 times | Topic: | Suggestions | |
| In Suggestions, MidwestBrick writes:
| In Suggestions, JusTiCe8 writes:
| Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
The other site that has various categories of Used was the #1 reason I will never
use it, unless BL goes away. I do not want to have to make my judgment call
and "hope" that the buyer has the same judgment call on what category of "used"
I selected.
Here is my advice when buying Used. Buy from various sources, when you find
a source that sells you crap compared to others... don't buy from the crap
store anymore and continue buying from the stores that treat you well. For example,
a large % of my Used pieces I am confident I could put down "like-new" and maybe
even sell them as "new" and no one would know the difference. I surely don't
do that but I'm trying to make a point. I don't make too many comments
on Used Items because it isn't necessary. Buyers that purchase from me multiple
times know what to expect, that a large percentage of Used items will be in good-great
condition unless I did make a notation about a specific dent, scratch, etc...
but didn't want to toss the piece as it has value to it, however, still have
the notation that it any piece is Used and could have been played with.
I don't think we need any Buyer Rating system either. This will only cause
uproar when our opinions are ever so slightly different.
Each Store can make their own process as they see fit. I have no issue with anyone
taking the time to do this. I certainly do not have the time to "judge" every
piece though. It would literally be sorting everything once which takes long
enough, and then sorting them all again and instead of having 2 main locations
for items stored (new and used) you would need 4 or 5 or who knows how many to
make sure you are pulling from the correct drawer, bag or akro-mill slot, etc...
There is Positive, Neutral and Negative Feedback available if, as a buyer, anyone
does not agree with what they received from what they purchased.
I understand your argument but I, and I assume many others here, do not have
another 4-8 hours per day to put into subjective scoring. Thanks
|
+1
|
|
Author: | WoutR | Posted: | Feb 6, 2019 16:23 | Subject: | Re: Please help identify color | Viewed: | 64 times | Topic: | Colors | |
| In Colors, yoavheskia writes:
| I think the 2x4 brick is really light orange , but it's not warm yellowish
orange (color no. 225). the corect color is Medium Yellowish Orange (color no.
121). it's defently not Flame Yellowish Orange (color no.191)
I'm looking for a 3001 master who can tell the exact color.
|
I can make a photo of all your reference colours with added Medium Yellowish
Orange and Warm Yellowish Orange. It will probably be a few days before I can
make time for that.
Also, the list only contains known colors for 3001. It is possible that more
colors were made. The list is updated when new colors are confirmed.
|
|
Author: | MidwestBrick | Posted: | Feb 6, 2019 16:18 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 34 times | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
The other site that has various categories of Used was the #1 reason I will never
use it, unless BL goes away. I do not want to have to make my judgment call
and "hope" that the buyer has the same judgment call on what category of "used"
I selected.
Here is my advice when buying Used. Buy from various sources, when you find
a source that sells you crap compared to others... don't buy from the crap
store anymore and continue buying from the stores that treat you well. For example,
a large % of my Used pieces I am confident I could put down "like-new" and maybe
even sell them as "new" and no one would know the difference. I surely don't
do that but I'm trying to make a point. I don't make too many comments
on Used Items because it isn't necessary. Buyers that purchase from me multiple
times know what to expect, that a large percentage of Used items will be in good-great
condition unless I did make a notation about a specific dent, scratch, etc...
but didn't want to toss the piece as it has value to it, however, still have
the notation that it any piece is Used and could have been played with.
I don't think we need any Buyer Rating system either. This will only cause
uproar when our opinions are ever so slightly different.
Each Store can make their own process as they see fit. I have no issue with anyone
taking the time to do this. I certainly do not have the time to "judge" every
piece though. It would literally be sorting everything once which takes long
enough, and then sorting them all again and instead of having 2 main locations
for items stored (new and used) you would need 4 or 5 or who knows how many to
make sure you are pulling from the correct drawer, bag or akro-mill slot, etc...
There is Positive, Neutral and Negative Feedback available if, as a buyer, anyone
does not agree with what they received from what they purchased.
I understand your argument but I, and I assume many others here, do not have
another 4-8 hours per day to put into subjective scoring. Thanks
|
|
Author: | yoavheskia | Posted: | Feb 6, 2019 15:51 | Subject: | Re: Please help identify color | Viewed: | 87 times | Topic: | Colors | |
| I think the 2x4 brick is really light orange , but it's not warm yellowish
orange (color no. 225). the corect color is Medium Yellowish Orange (color no.
121). it's defently not Flame Yellowish Orange (color no.191)
I'm looking for a 3001 master who can tell the exact color.
|
|
|
Author: | Biglesdug | Posted: | Feb 6, 2019 15:51 | Subject: | Re: Inventory Change Request for Minifig tls095 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Biglesdug writes:
| Please make changes to the following inventory:
* Delete 1 Part 970c00pb842 Dark Tan Hips and Legs with Yellow Apron Pattern
Comments from Submitter:
Kidfest employee figure uses tan leg and hips with Yellow Apron Pattern not Dark Tan.
|
Yep, they definitely look tan to me. We will either correct the inventory once
the correct part is in the catalog or mark this entry for deletion and create
a new entry.
Cheers,
Randy
|
Randy I upload a photo of the correct tan pants for that figure. I'm not
sure if I should of entered it as the same part number (print looks the same)
or as a new part number?
|
|
Author: | iprice | Posted: | Feb 6, 2019 14:53 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 44 times | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
I had a shipment of Lego parts recently that were a batch of new and used allegedly
"clean" Lego parts that all stank to high heaven of tobacco smoke. Some sellers
really don't care about the product at all. The b@stard even gave me a negative
feedback for complaining that a product I had paid good money for smelled terrible.
|
|
Author: | elias3 | Posted: | Feb 6, 2019 13:32 | Subject: | Inventory Change Request for Set 60204-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
2x part out and found the -a type (for the 4x in total)
|
|
Author: | Adjour | Posted: | Feb 6, 2019 12:20 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 33 times | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
I dunno, I notice most sellers don't even bother to describe their used parts
at all. So I find any description, even an opinion that may be slightly off from
mine, useful to me.
I've skipped sellers in the past due to no description (esp on expensive
instructions). Every junk part I've received has been on the cheaper end
with no description.
Anyway, I don't see a way to police this, honestly. Its too subjective. You
could have a rating system like ebay where you can rate the item "as described"
with up to 5 stars. However this means tons of sellers would now have to actually
take the time to describe their parts.
|
|
Author: | calebfishn | Posted: | Feb 6, 2019 11:00 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 35 times | Topic: | Suggestions | |
| I think that many sellers know how to properly describe their lego and to ensure
that "used" lego is not junk. Bite marks, discolouration, deep scratches, and
damage are not part of what "used" means. All of those can only pass as filler
and should be clearly described as such.
I believe the best assurance a buyer has that used parts will be of good quality
is to choose a seller with a significant amount of positive feedback.
Buyers can also help themselves by regularly informing sellers if used parts
do not meet the standards for listing.
|
|
Author: | edk | Posted: | Feb 6, 2019 10:21 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 34 times | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
Depends on how much more $ buyers want to pay for used parts tp compensate for
the added time involved with listing,sorting,storing multiple conditions of the
same part.
|
|
Author: | brikomania | Posted: | Feb 6, 2019 08:45 | Subject: | Re: New and Used: more shades of grey are needed | Viewed: | 33 times | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
In another site, there are different used ratings, Used (like new), used (good),
used (acceptable). i think this is a good idea.
Of course any seller can lie, and list a chewed part as like new, but then they
also could list a used set as new sealed if they wish, feedback should reflect
that.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|