Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Autism_And_I  | | Posted: | Apr 25, 2024 12:33 | | Subject: | Can't add catalog information to Instructions | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
| Which preset am I supposed to select when submitting a change request for instructions?
I assumed it was just the Catalog one.
However when submitting it tells me; "Item No to Change does not exist in
Catalog."
I am copy/pasting them Item No from the existing entry.
I've tried changing to Book rather than Catalog as well as attempting to
change the Item No by removing both the -1 and "Instructions Entry" Text.
I did not expect these to work and indeed they did not.
Looking at the Catalog Add or Change menu, there is an option for instructions
under Add Image but not under Change Item.
I just wanted to submit weight and dimensions for an instruction manual.
Perhaps I am missing something. But the guide just leads to the same Change Item
form, which is where I started.
|
|
 |
| Author: | popsicle | | Posted: | Apr 25, 2024 10:47 | | Subject: | Re: Book shelf identification? | | Viewed: | 61 times | | Topic: | Catalog Identification | |
| In Catalog Identification, Kneupke writes:
| | Hi all,
Any help identifying this?
Thanks in advance
Angela
|
|
|
| Author: | Admin_Russell | | Posted: | Apr 25, 2024 10:45 | | Subject: | Re: parts in non existent colors deleted | | Viewed: | 93 times | | Topic: | Colors | |
| In Colors, adpb writes:
| | Hello,
The Bricklink administration removed one of my selling listings. The reason was
that the parts were listed in a non existent color.
The part was actually a genuine lego part, listed in the correct color. Only
was it never released in an official set, so it does not show up in the color
guide in any set. Is it no longer allowed to list such parts? As far as i know
this type of parts could be obtained in a legal way from a pick a brick wall.
|
Please tell us which part it was that was removed. It could have been a mistake,
but it could have also been an unwritten rule that we have had to enforce because
of the problem of fake parts. Unfortunately we do not have a log of deletions.
|
|
| Author: | Dhobeck | | Posted: | Apr 25, 2024 10:42 | | Subject: | Re: Book shelf identification? | | Viewed: | 31 times | | Topic: | Catalog Identification | |
| In Catalog Identification, Kneupke writes:
| | Hi all,
Any help identifying this?
Thanks in advance
Angela
|
Are they stickers or printed?
|
| Author: | Kneupke | | Posted: | Apr 25, 2024 10:40 | | Subject: | Book shelf identification? | | Viewed: | 97 times | | Topic: | Catalog Identification | |
| Hi all,
Any help identifying this?
Thanks in advance
Angela
|
|
| Author: | runner.caller | | Posted: | Apr 25, 2024 10:32 | | Subject: | Re: parts in non existent colors deleted | | Viewed: | 51 times | | Topic: | Colors | |
| In Colors, adpb writes:
| | Hello,
The Bricklink administration removed one of my selling listings. The reason was
that the parts were listed in a non existent color.
The part was actually a genuine lego part, listed in the correct color. Only
was it never released in an official set, so it does not show up in the color
guide in any set. Is it no longer allowed to list such parts? As far as i know
this type of parts could be obtained in a legal way from a pick a brick wall.
|
Great question, the baby dinosaur part in tan always confused me as it's
not in any sets, but there are a decent amount of them for sale.
|
|
| Author: | yorbrick | | Posted: | Apr 25, 2024 08:12 | | Subject: | Re: parts in non existent colors deleted | | Viewed: | 61 times | | Topic: | Colors | |
| | |
I wonder what would that proof could look like....
An invoice from PAB with a line 'prototype part'?
Can someone give an actual example of proof of purchase that would be accepted
by BL?
|
If bought from online PAB, then the paper invoice they send has all parts listed.
If instore PAB, maybe a photo of the PAB tower, although the majority of parts
I have ever seen on a PAB wall have already been common parts. Whereas online
PAB has had parts that were not (yet) released in the past.
It is more likely that they would be from one of the German warehouse type stores
or LEGOLAND builder stock than from PAB.
|
|
| Author: | axaday | | Posted: | Apr 25, 2024 07:54 | | Subject: | Re: Many errors in the catalog | | Viewed: | 58 times | | Topic: | Catalog | |
| In Catalog, Shintaku writes:
| | Yes but you didn't read sir.
Now we currently have for the same range
3068bp
and
3608pb
This is an error.
|
The error there is yours. You shouldn't be searching "3068bp*".
If you go look, nothing is named that. They just put the old numbers in as
alternates so people who were unaware of the change will be able to find things
labelled with the old numbers. You are aware of the change and should only be
searching "3068p*".
| | If 3068b doesn't exist anymore ALL the 3068bp should change to 3068p
|
They did. You are finding the same pieces in both searches, except the "bp"
search will omit new ones going forward and also the peeron, LDraw, and I guess
Star Wars ones.
| | But old tiles are under 3068bp.
|
Only in their alternate numbers.
Yes
|
|
| Author: | peregrinator | | Posted: | Apr 25, 2024 07:27 | | Subject: | Re: Many errors in the catalog | | Viewed: | 34 times | | Topic: | Catalog | |
| In Catalog, Shintaku writes:
| | This works only for OLD tiles.
|
Yes, it works for all the decorated tiles that had been created before the change
from 3068b to 3068.
|
| Author: | Shintaku | | Posted: | Apr 25, 2024 07:21 | | Subject: | Re: Many errors in the catalog | | Viewed: | 48 times | | Topic: | Catalog | |
| In Catalog, peregrinator writes:
| | In Catalog, Shintaku writes:
| | 3068bp* finds SOME result of the 3068p* but not ALL THE results.
Instead, it should return nothing.
The search is broken, not the inventory
|
The search is fine, it is searching alternate numbers. So those 3068p- that have
a 3068bp- alternate number will be returned on a search for 3068bp*
|
This works only for OLD tiles.
So if you look for the 3068bp* in your inventory, only some will spawn.
This is wrong.
|
|
| Author: | peregrinator | | Posted: | Apr 25, 2024 07:12 | | Subject: | Re: Many errors in the catalog | | Viewed: | 31 times | | Topic: | Catalog | |
| In Catalog, Shintaku writes:
| | 3068bp* finds SOME result of the 3068p* but not ALL THE results.
Instead, it should return nothing.
The search is broken, not the inventory
|
The search is fine, it is searching alternate numbers. So those 3068p- that have
a 3068bp- alternate number will be returned on a search for 3068bp*
|
|
| Author: | Stellar | | Posted: | Apr 25, 2024 07:11 | | Subject: | Re: Many errors in the catalog | | Viewed: | 26 times | | Topic: | Catalog | |
| In Catalog, Shintaku writes:
| | In Catalog, Give.Me.A.Brick writes:
| | In Catalog, Shintaku writes:
| | In Catalog, Give.Me.A.Brick writes:
| | In Catalog Requests, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
|
3068b doesn't exist anymore, now it is just 3068 to conform with LEGO number.
We have now 3068 for the regular current tile with groove and 3068a for the old
tile without groove.
Thus printed tiles with groove are now 3068p*
Hope that helps?
|
But there are many tile printed in 3068bp*
|
I don't see any. Can you give an example?
| | So either all are moved to 3068p* or not.
This is inconsistent.
|
|
You are right.
The problem is not the result, but the research.
3068bp* finds SOME result of the 3068p* but not ALL THE results.
Instead, it should return nothing.
The search is broken, not the inventory
|
The old item numbers 3068bpXXXX were put as Alternate IDs in the corresponding
parts to help locate them for users who don't know about the changes.
|
|
| Author: | Shintaku | | Posted: | Apr 25, 2024 07:07 | | Subject: | Re: Many errors in the catalog | | Viewed: | 29 times | | Topic: | Catalog | |
| In Catalog, Give.Me.A.Brick writes:
| | In Catalog, Shintaku writes:
| | In Catalog, Give.Me.A.Brick writes:
| | In Catalog Requests, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
|
3068b doesn't exist anymore, now it is just 3068 to conform with LEGO number.
We have now 3068 for the regular current tile with groove and 3068a for the old
tile without groove.
Thus printed tiles with groove are now 3068p*
Hope that helps?
|
But there are many tile printed in 3068bp*
|
I don't see any. Can you give an example?
| | So either all are moved to 3068p* or not.
This is inconsistent.
|
|
You are right.
The problem is not the result, but the research.
3068bp* finds SOME result of the 3068p* but not ALL THE results.
Instead, it should return nothing.
The search is broken, not the inventory
|
|
| Author: | Stellar | | Posted: | Apr 25, 2024 06:57 | | Subject: | Re: Many errors in the catalog | | Viewed: | 34 times | | Topic: | Catalog | |
| In Catalog, axaday writes:
| | In Catalog, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
Like : https://www.bricklink.com/catalogItemIn.asp?P=3068pb2361&in=S
I believe that this is an error.
Can you confirm me?
Because when searching 3068bp*, as it should, many do not appear.
|
3068apb are old, old ones without groove.
3068p are printed ones that were described by LDraw before Bricklink was created.
Dan used their designations to harmonize and gave them credit.
3068px are printed ones that were described by Peeron before Bricklink was created.
Dan used their designations to harmonize and gave them credit.
3068pb are printed ones that were described on Bricklink after creation.
|
What about ps?
https://www.bricklink.com/help.asp?helpID=168
|
|
| Author: | enig | | Posted: | Apr 25, 2024 06:57 | | Subject: | Re: parts in non existent colors deleted | | Viewed: | 54 times | | Topic: | Colors | |
| In Colors, Stellar writes:
| | In Colors, adpb writes:
| | Hello,
The Bricklink administration removed one of my selling listings. The reason was
that the parts were listed in a non existent color.
The part was actually a genuine lego part, listed in the correct color. Only
was it never released in an official set, so it does not show up in the color
guide in any set. Is it no longer allowed to list such parts? As far as i know
this type of parts could be obtained in a legal way from a pick a brick wall.
|
Where they in a transparent color? If so it might be related to this post:
https://www.bricklink.com/message.asp?ID=1322014
If you have proof of purchase before listing again I would recommend contacting
the Help Desk.
https://www.bricklink.com/message.asp?ID=1465103
|
I wonder what would that proof could look like....
An invoice from PAB with a line 'prototype part'?
Can someone give an actual example of proof of purchase that would be accepted
by BL?
A rhetorical question more than anything but I'd love if someone entertained
me with an answer still. This is the same as discovering that something that
you bought at a grocery store has mold in it, but the store refusing a refund
because you did not save the receipt.
If such an imaginary proof existed even theoretically - fine. But otherwise -
owners of legitimate parts are getting slapped in the face once for having their
listing removed, and then getting laughed in their faces by 'show me a receipt
from 30 years ago, then we will allow you to list the item".
|
|
| Author: | Stellar | | Posted: | Apr 25, 2024 06:55 | | Subject: | Re: Many errors in the catalog | | Viewed: | 35 times | | Topic: | Catalog | |
| In Catalog, Give.Me.A.Brick writes:
| | In Catalog, Shintaku writes:
| | In Catalog, Give.Me.A.Brick writes:
| | In Catalog Requests, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
|
3068b doesn't exist anymore, now it is just 3068 to conform with LEGO number.
We have now 3068 for the regular current tile with groove and 3068a for the old
tile without groove.
Thus printed tiles with groove are now 3068p*
Hope that helps?
|
But there are many tile printed in 3068bp*
|
I don't see any. Can you give an example?
| | So either all are moved to 3068p* or not.
This is inconsistent.
|
|
Neither do I:
https://www.bricklink.com/catalogList.asp?pg=1&q=3068%2A&catLike=W&catString=39&sortBy=I&sortAsc=A&catType=P
|
|
| Author: | Give.Me.A.Brick | | Posted: | Apr 25, 2024 06:26 | | Subject: | Re: Many errors in the catalog | | Viewed: | 40 times | | Topic: | Catalog | |
| In Catalog, Shintaku writes:
| | In Catalog, Give.Me.A.Brick writes:
| | In Catalog Requests, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
|
3068b doesn't exist anymore, now it is just 3068 to conform with LEGO number.
We have now 3068 for the regular current tile with groove and 3068a for the old
tile without groove.
Thus printed tiles with groove are now 3068p*
Hope that helps?
|
But there are many tile printed in 3068bp*
|
I don't see any. Can you give an example?
| | So either all are moved to 3068p* or not.
This is inconsistent.
|
|
|
| Author: | Shintaku | | Posted: | Apr 25, 2024 06:22 | | Subject: | Re: Many errors in the catalog | | Viewed: | 43 times | | Topic: | Catalog | |
| In Catalog, axaday writes:
| | In Catalog, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
Like : https://www.bricklink.com/catalogItemIn.asp?P=3068pb2361&in=S
I believe that this is an error.
Can you confirm me?
Because when searching 3068bp*, as it should, many do not appear.
|
3068apb are old, old ones without groove.
3068p are printed ones that were described by LDraw before Bricklink was created.
Dan used their designations to harmonize and gave them credit.
3068px are printed ones that were described by Peeron before Bricklink was created.
Dan used their designations to harmonize and gave them credit.
3068pb are printed ones that were described on Bricklink after creation.
|
Yes but you didn't read sir.
Now we currently have for the same range
3068bp
and
3608pb
This is an error.
If 3068b doesn't exist anymore ALL the 3068bp should change to 3068p
So, actually the inventory is inconsistent because new tiles are under the 3068p
following the new rule that 3068b doesn't exist anymore.
But old tiles are under 3068bp.
Do you understand now?
|
|
| Author: | axaday | | Posted: | Apr 25, 2024 05:33 | | Subject: | Re: Inventory Change Request for Set 5974-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, seanpowell writes:
| | Please make changes to the following inventory:
* Add 2 Part 48729 Dark Bluish Gray Bar 1L with Clip Mechanical Claw (Undetermined Type)
Comments from Submitter:
Required at ship step 14, instruction book 1. Confirmed on set inventory at end of book 2
|
You are naming out parts that are already in the inventory to build
the droid.
|
|
| Author: | axaday | | Posted: | Apr 25, 2024 05:31 | | Subject: | Re: Many errors in the catalog | | Viewed: | 60 times | | Topic: | Catalog | |
| In Catalog, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
Like : https://www.bricklink.com/catalogItemIn.asp?P=3068pb2361&in=S
I believe that this is an error.
Can you confirm me?
Because when searching 3068bp*, as it should, many do not appear.
|
3068apb are old, old ones without groove.
3068p are printed ones that were described by LDraw before Bricklink was created.
Dan used their designations to harmonize and gave them credit.
3068px are printed ones that were described by Peeron before Bricklink was created.
Dan used their designations to harmonize and gave them credit.
3068pb are printed ones that were described on Bricklink after creation.
|
|
| Author: | Shintaku | | Posted: | Apr 25, 2024 05:16 | | Subject: | Re: Many errors in the catalog | | Viewed: | 55 times | | Topic: | Catalog | |
| In Catalog, Give.Me.A.Brick writes:
| | In Catalog Requests, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
|
3068b doesn't exist anymore, now it is just 3068 to conform with LEGO number.
We have now 3068 for the regular current tile with groove and 3068a for the old
tile without groove.
Thus printed tiles with groove are now 3068p*
Hope that helps?
|
But there are many tile printed in 3068bp*
So either all are moved to 3068p* or not.
This is inconsistent.
|
|
| Author: | Nicolasamico37 | | Posted: | Apr 25, 2024 05:14 | | Subject: | Re: Blue 2x4 slope TICKETS PRINT | | Viewed: | 36 times | | Topic: | Catalog Identification | |
| In Catalog Identification, Sowhatbricks2.0 writes:
| | I’m sorting some parts and came across a blue 2x4 slope (3037) that has a TICKETS
pattern on the back side of the piece, I checked the catalog and couldn’t find
it listed. Does anyone know what set it goes to and the catalog part number.
thanks
|
Hi,
Difficult to find...
I checked every transportation set, in City and Train categories, without success
Hope you find any information
Nicolas
|
|
| Author: | Stellar | | Posted: | Apr 25, 2024 04:46 | | Subject: | Re: parts in non existent colors deleted | | Viewed: | 53 times | | Topic: | Colors | |
| In Colors, adpb writes:
| | Hello,
The Bricklink administration removed one of my selling listings. The reason was
that the parts were listed in a non existent color.
The part was actually a genuine lego part, listed in the correct color. Only
was it never released in an official set, so it does not show up in the color
guide in any set. Is it no longer allowed to list such parts? As far as i know
this type of parts could be obtained in a legal way from a pick a brick wall.
|
Where they in a transparent color? If so it might be related to this post:
https://www.bricklink.com/message.asp?ID=1322014
If you have proof of purchase before listing again I would recommend contacting
the Help Desk.
https://www.bricklink.com/message.asp?ID=1465103
|
|
| Author: | yorbrick | | Posted: | Apr 25, 2024 04:42 | | Subject: | Re: parts in non existent colors deleted | | Viewed: | 59 times | | Topic: | Colors | |
| In Colors, adpb writes:
| | Hello,
The Bricklink administration removed one of my selling listings. The reason was
that the parts were listed in a non existent color.
The part was actually a genuine lego part, listed in the correct color. Only
was it never released in an official set, so it does not show up in the color
guide in any set. Is it no longer allowed to list such parts? As far as i know
this type of parts could be obtained in a legal way from a pick a brick wall.
|
They have removed parts that are not in official (retail set) colours, especially
minifigure parts, where they have been made by "night shift" workers
that then steal and sell them. I imagine that possibly legitimate parts have
been caught up in this.
https://www.bricklink.com/message.asp?ID=1322014
|
|
| Author: | adpb | | Posted: | Apr 25, 2024 04:30 | | Subject: | parts in non existent colors deleted | | Viewed: | 198 times | | Topic: | Colors | | Status: | Open | |
| Hello,
The Bricklink administration removed one of my selling listings. The reason was
that the parts were listed in a non existent color.
The part was actually a genuine lego part, listed in the correct color. Only
was it never released in an official set, so it does not show up in the color
guide in any set. Is it no longer allowed to list such parts? As far as i know
this type of parts could be obtained in a legal way from a pick a brick wall.
|
|
| Author: | Give.Me.A.Brick | | Posted: | Apr 25, 2024 04:22 | | Subject: | Re: Many errors in the catalog | | Viewed: | 49 times | | Topic: | Catalog | |
| In Catalog Requests, Shintaku writes:
| | Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
|
3068b doesn't exist anymore, now it is just 3068 to conform with LEGO number.
We have now 3068 for the regular current tile with groove and 3068a for the old
tile without groove.
Thus printed tiles with groove are now 3068p*
Hope that helps?
|
|
| Author: | Shintaku | | Posted: | Apr 25, 2024 04:08 | | Subject: | Many errors in the catalog | | Viewed: | 145 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
Like : https://www.bricklink.com/catalogItemIn.asp?P=3068pb2361&in=S
I believe that this is an error.
Can you confirm me?
Because when searching 3068bp*, as it should, many do not appear.
|
| Author: | Nubs_Select | | Posted: | Apr 24, 2024 23:56 | | Subject: | Re: Inventory Change Request for Set 41376-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, keating01 writes:
| | Please make changes to the following inventory:
* Add 2 Part 24246 Trans-Orange Tile, Round 1 x 1 Half Circle Extended
|
They are part of this
Minifigure in the set inventory
|
| Author: | keating01 | | Posted: | Apr 24, 2024 23:53 | | Subject: | Inventory Change Request for Set 41376-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 24246 Trans-Orange Tile, Round 1 x 1 Half Circle Extended
|
| Author: | seanpowell | | Posted: | Apr 24, 2024 23:43 | | Subject: | Inventory Change Request for Set 5974-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 48729 Dark Bluish Gray Bar 1L with Clip Mechanical Claw (Undetermined Type)
Comments from Submitter:
Required at ship step 14, instruction book 1. Confirmed on set inventory at end of book 2
|
| Author: | seanpowell | | Posted: | Apr 24, 2024 23:31 | | Subject: | Inventory Change Request for Set 5974-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 2555 White Tile, Modified 1 x 1 with Clip
Comments from Submitter:
Required at ship, step 14 instructions book 1. Confirmed on set inventory on back of instruction book 2
|
| Author: | seanpowell | | Posted: | Apr 24, 2024 23:26 | | Subject: | Inventory Change Request for Set 5974-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4697b Light Bluish Gray Pneumatic T Piece Second Version (T Bar with Ball in Center)
Comments from Submitter:
Required at steps 4 of buggy and 14 of ship, instruction book 1. Also has 2 required on set inventory, back of instruction book 2
|
| Author: | axaday | | Posted: | Apr 24, 2024 23:09 | | Subject: | Re: Inventory Change Request for Set 5974-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| In Inventories Requests, seanpowell writes:
| | Please make changes to the following inventory:
* Add 1 Part 4733 Black Brick, Modified 1 x 1 with Studs on 4 Sides
Comments from Submitter:
Step 14 of instructions, book 1
|
|
| Author: | seanpowell | | Posted: | Apr 24, 2024 23:06 | | Subject: | Inventory Change Request for Set 5974-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4733 Black Brick, Modified 1 x 1 with Studs on 4 Sides
Comments from Submitter:
Step 14 of instructions, book 1
|
| Author: | Sowhatbricks2.0 | | Posted: | Apr 24, 2024 22:20 | | Subject: | Re: Blue 2x4 slope TICKETS PRINT | | Viewed: | 42 times | | Topic: | Catalog Identification | |
| | It’s not a sticker |
| Author: | TheBrickGuys | | Posted: | Apr 24, 2024 22:08 | | Subject: | Re: Blue 2x4 slope TICKETS PRINT | | Viewed: | 32 times | | Topic: | Catalog Identification | |
| In Catalog Identification, Sowhatbricks2.0 writes:
| | I’m sorting some parts and came across a blue 2x4 slope (3037) that has a TICKETS
pattern on the back side of the piece, I checked the catalog and couldn’t find
it listed. Does anyone know what set it goes to and the catalog part number.
thanks
|
Is it a sticker? If so then maybe it is a sticker that is supposed to be put
on a different piece and not a 2x4 slope.
Jim
|
| Author: | Sowhatbricks2.0 | | Posted: | Apr 24, 2024 20:42 | | Subject: | Blue 2x4 slope TICKETS PRINT | | Viewed: | 89 times | | Topic: | Catalog Identification | |
| I’m sorting some parts and came across a blue 2x4 slope (3037) that has a TICKETS
pattern on the back side of the piece, I checked the catalog and couldn’t find
it listed. Does anyone know what set it goes to and the catalog part number.
thanks
|
|
|
| Author: | randyf | | Posted: | Apr 24, 2024 16:41 | | Subject: | Re: Inaccuracies with the BIONICLE mask packs | | Viewed: | 28 times | | Topic: | Catalog | |
| All fixed up.
Cheers,
Randy
In Catalog, WOLKsite writes:
| | Hello, this has been bothering me for a while now, but several of the mask packs
listed either do not exist at all, or are listed with the wrong region.
For starters, the US/non-US distinction -- having spoken with several Canadian
BIONICLE fans about these, Canada had the boxed versions as well. Additionally,
LEGO's naming scheme uses the distinguishment of "IN" and "AM",
rather than "NA" or "US", which leads me to believe that they
were available in both South and North America.
Considering that Connecticut became HQ for LEGO's activities in all of America
around 1998, this also tracks: https://www.lego.com/en-gb/history/articles/g-production-in-brazil/
Further-more, I have found no evidence of 8530, 8559, 8597, or 8600 existing
in boxed form. Just Google them, there are no photos of them - because they do
not exist.
To go through each set one-by-one:
Kanohi:
- US Catalogue: https://archive.org/details/Lego-Shop-At-Home-summer-2001-Bionicle-Cover/page/n1/mode/2up
- US Shop@Home: https://web.archive.org/web/20031203111200/http://shop.lego.com/product.asp?p=8525
- UK Ad: https://biosector01.com/w/images/bs01/6/63/UK_2001_LEGO_shop_ad.jpg
This one is correct.
This one is correct.
[S=8530-2]
This one does not exist; the image used in a prototype moccup of the box art.
Krana:
UK Catalogue 1: https://images.brickset.com/library/view/?f=catalogues/c02uk&p=64
UK Catalogue 2: https://images.brickset.com/library/view/?f=catalogues/c02uk2&p=80
(this onse seems to confused 8559 and 8597).
US Catalogue: https://archive.org/details/lego-shop-at-home-summer-2002/page/n31/mode/2up
This one does exist. The image is a digital moccup.
[S=8559-2]
This one is correct.
This one was released in America.
Kanohi Nuva:
US Catalogue: https://archive.org/details/lego-shop-at-home-holiday-2002/page/n43/mode/2up
US Catalogue 2: https://archive.org/details/shop-at-home-fall-2003/page/n35/mode/2up
LEGO Shop at Home: http://web.archive.org/web/20031204080846/http://shop.lego.com/product.asp?p=8574
(has a dead link to 8598)
This one should be labelled non-American polybag version.
This one should be labelled American boxed version.
Krana-Kal:
This one should be labelled American boxed version.
This one is correct.
|
|
|
| Author: | peregrinator | | Posted: | Apr 24, 2024 16:18 | | Subject: | Re: Inventory Change Request for Set 9702-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, JulieK writes:
| | Each of the 2 sets I bought only had 1 in the polybag. Seems unlikely they would
have been bagged separately.
|
I don't know what the practice is (or was at the time) but it seems reasonable
that there would be 1 cord per polybag so they could be grabbed and inserted
into the set more easily, whether by a human being or a robot. This would also
prevent their getting tangled in the bag. Imagine trying to pick up exactly two
cords from a bunch that aren't bagged.
|
|
| Author: | randyf | | Posted: | Apr 24, 2024 15:52 | | Subject: | Re: How to resolve a Doctor Octopus inconsistency | | Viewed: | 45 times | | Topic: | Catalog | |
| In Catalog Requests, Peteparker writes:
| | Hello!
I noticed that some sets like the Daily Bugle (76178-1) list the Doc Ock figure
with the arms included, but the one from the Monster Truck set (76174-1) didn't.
Could it be at least included as an alternate to the minifigure alone? It makes
more sense to me for the figure to be offered both with and without the mechanical
arms, but the listings including these are inconsistent.
Thanks for the consideration and any feedback about the situation.
Nathan (Peteparker)
|
Our current catalog guidelines for minifigures make the condition of handheld
items being added to the minifigure in the instructions the finishing point of
the minifigure build. So, for Doc Ock from
the figure is considered complete on page 5 before the arms are built and added
on the subsequent pages.
Cheers,
Randy
|
|
|
| Author: | WildBricks | | Posted: | Apr 24, 2024 15:43 | | Subject: | Re: 446 in black | | Viewed: | 39 times | | Topic: | Catalog Identification | |
| | |
To add to this, 3 bricks' height works out to be just under 4 studs'
length (each brick in height is 6/5 a stud's length), which might be the
cause of the confusion
3 * 6/5 = 18 / 5 = 3.6
|
Thank you. I was just about to ask that. I need to be measuring doors by bricks,
not by studs on a plate... I think I must have forgotten that.
|
|
| Author: | JulieK | | Posted: | Apr 24, 2024 15:42 | | Subject: | Re: Inventory Change Request for Set 9702-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | In Inventories Requests, JulieK writes:
| | In Inventories Requests, JulieK writes:
| | Please make changes to the following inventory:
* Delete 2 Part x77 Black String, Cord (Undetermined Type)
* Add 1 Part x77ac75 Black String, Cord Thin 75cm
Comments from Submitter:
I measured the black string to be 75cm (from 2 new sets with no bin). However, I am only seeing 1 string in each set. I bought these 2nd hand and the 1x16 tech bricks were not polybagged, nor were the long electric cables. I suppose it's possible those parts were polybagged with a string, but since I am only seeing 1 string, I'm only requesting a delete/add for 1 string. I'll attach a pic of the polybag the string came in. Thanks!
|
Did some more digging. Inventory card shows 1 string:
https://www.bricklink.com/message.asp?ID=1201259
|
I also found the photo of another cardboard that only shows one string. So I
will accept this change.
It's strange that the old request never fixed the quantity of the strings.
Any chance that the second string was an extra?
|
Each of the 2 sets I bought only had 1 in the polybag. Seems unlikely they would
have been bagged separately.
| |
Large parts are known to come without being polybagged in some sets, especially
in the 90's. So I think these were never packaged in this set.
/Jan
|
|
|
| Author: | JulieK | | Posted: | Apr 24, 2024 15:38 | | Subject: | Re: Inventory Change Request for Set 9702-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | | | I requested to delete 1, but looks like it automatically requested to delete
2?
|
Using the "delete" action will cause the whole inventory entry to be
deleted, i.e. both strings. Using the action "change" instead, you can
change the quantity from 2 to 1.
/Jan
|
D'oh! Makes sense, thanks 
|
| Author: | peregrinator | | Posted: | Apr 24, 2024 15:37 | | Subject: | Re: 446 in black | | Viewed: | 36 times | | Topic: | Catalog Identification | |
| In Catalog Identification, randyf writes:
| | In Catalog Identification, WildBricks writes:
|
| | The blue door is
and the black door is
|
To add to this, 3 bricks' height works out to be just under 4 studs'
length (each brick in height is 6/5 a stud's length), which might be the
cause of the confusion
3 * 6/5 = 18 / 5 = 3.6
|
| Author: | randyf | | Posted: | Apr 24, 2024 15:32 | | Subject: | Re: 446 in black | | Viewed: | 37 times | | Topic: | Catalog Identification | |
| In Catalog Identification, WildBricks writes:
| |
As far as I can tell, this item doesn't exist in black, but I can't figure
out what other part it could be. (Blue door is for reference and I'm pretty
sure it is 445a.)
Help, please and thank you!
|
The blue door is
and the black door is
|
|
| Author: | Sowhatbricks2.0 | | Posted: | Apr 24, 2024 15:18 | | Subject: | Blue 2x4 slope with TICKETS pattern | | Viewed: | 67 times | | Topic: | Catalog Identification | |
| I’m sorting some parts and came across a blue 2x4 slope (3037) that has a TICKETS
pattern on the back side of the piece, I checked the catalog and couldn’t find
it listed. Does anyone know what set it goes to and the catalog part number?
I’ll include a pic of the piece. thanks
|
|
| Author: | WildBricks | | Posted: | Apr 24, 2024 15:14 | | Subject: | 446 in black | | Viewed: | 91 times | | Topic: | Catalog Identification | |
|
As far as I can tell, this item doesn't exist in black, but I can't figure
out what other part it could be. (Blue door is for reference and I'm pretty
sure it is 445a.)
Help, please and thank you!
|
|
| Author: | Yoshizard64 | | Posted: | Apr 24, 2024 12:29 | | Subject: | Inventory Change Request for Set 6988-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {5306b Electric, Wire with Brick 2 x 2 x 2/3 Ends (Undetermined Type) to 5306bc015 Electric, Wire with Brick 2 x 2 x 2/3 Ends, 15 Studs Long}
Comments from Submitter:
Page 13 of instructions: http://www.peeron.com/scans/6988-1/13
Commonly used short cable from many sets of this era.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
