Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | randyf | Posted: | Apr 13, 2024 11:15 | Subject: | Re: Inventory Change Request for Set 30378-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, gvbricks writes:
| Please make changes to the following inventory:
* Add 1 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges (Extra)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 (Extra)
* Change {3 to 2} Part Light Bluish Gray 3673 Technic, Pin without Friction Ridges
Comments from Submitter:
partout / building instruction
|
3x
are all needed in Step 7.
Since these requests were already accepted by someone else, the inventory will
need to be updated once more.
|
I should not do catalog work from my mobile phone.
The extra part is correct, though:
https://youtu.be/hbST_d7NBCI?t=33
https://youtu.be/jzf38kKBm0Y?t=72
|
I had found evidence already that the extras were correct. I just wanted to give
the OP the chance to add them.
|
|
Author: | randyf | Posted: | Apr 13, 2024 11:02 | Subject: | Re: Inventory Change Request for Set 6253-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 1 Part Black 48002a Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / + Orientation) {Alternate to Regular}
* Change 1 Part Black 48002b Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / x Orientation) {Regular to Alternate}
Comments from Submitter:
This set cannot be built with 48002b. It must have the '+' orientation, so I am moving 48002a to the Regular Items section. The inclusion of 48002b in the inventory is most likely an error.
|
|
|
|
Author: | randyf | Posted: | Apr 13, 2024 11:02 | Subject: | Inventory Change Request for Set 6253-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black 48002a Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / + Orientation) {Alternate to Regular}
* Change 1 Part Black 48002b Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / x Orientation) {Regular to Alternate}
Comments from Submitter:
This set cannot be built with 48002b. It must have the '+' orientation, so I am moving 48002a to the Regular Items section. The inclusion of 48002b in the inventory is most likely an error.
|
|
Author: | randyf | Posted: | Apr 12, 2024 14:31 | Subject: | Re: Inventory Change Request for Set 30378-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, gvbricks writes:
| Please make changes to the following inventory:
* Add 1 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges (Extra)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 (Extra)
* Change {3 to 2} Part Light Bluish Gray 3673 Technic, Pin without Friction Ridges
Comments from Submitter:
partout / building instruction
|
3x
are all needed in Step 7.
Since these requests were already accepted by someone else, the inventory will
need to be updated once more.
Cheers,
Randy
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 14:22 | Subject: | Re: Inventory Change Request for Set 70413-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 2 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 2)
* Add 2 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 2)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/TqpY8DbTJls?t=118
|
30237b shown in the unboxing and build here:
https://youtu.be/CWUAspjTr8k?t=180
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 13:35 | Subject: | Re: Quality control issues | Viewed: | 53 times | Topic: | General | |
|
| In General, WildBricks writes:
| So either the kid who this collection came from is unusually strong or LEGO is
having some serious quality control issues. I've found more broken parts
in this lot than I've ever seen before. I've got plates and bricks from
30+ years ago that have held up better than these parts from under 7 years ago.
Anyone else seeing an increase in damaged parts from newer bulk used purchases?
|
Completely common in the modern era, unfortunately.
|
|
Author: | randyf | Posted: | Apr 12, 2024 13:31 | Subject: | Re: Window 1 x 4 x 5 with Hollow Studs Item 2493b | Viewed: | 39 times | Topic: | Colors | |
|
| In Colors, Aquilon writes:
| Hi everybody
I want to enter this part Window 1 x 4 x 5 with Hollow Studs Item No: 2493b
in my collection but the color I have does not exist. My part is black. I don't
know which set it comes from but I saw on https://rebrickable.com/home/ that
there are at least 9 sets in which it takes place in black. How can I do ?
Thanks.
|
It most likely comes from one or more of the following sets:
https://www.bricklink.com/catalogItemIn.asp?P=2493&colorID=11&in=A
that currently contains
When someone can prove definitively that any of those sets came with the hollow-stud
version of the window, then we can update the inventories to show that. This
will then trigger the color "Black" to show up on the catalog page for
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 12, 2024 13:22 | Subject: | Re: Honey, where are my Pants? | Viewed: | 36 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, novabrick writes:
| Hello there!
Could we maybe start giving Legs a bit more descriptive names?
|
These days, almost everything gets a very descriptive name, but that was not
always the case. Having said that, everyone is free to submit name change requests
on anything that they find lacking in description, and that has always been the
case.
https://www.bricklink.com/catalogReq.asp
Cheers,
Randy
| Items like:
are a bit hard to find for people who haven't memorized the whole catalog
of Star Wars Characters and Uniforms.
Thanks you for your consideration.
Christian
novabrick-team
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 05:29 | Subject: | Re: Inventory Change Request for Set 70410-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/g57PeKPW8T8?t=81
|
30237b shown in the unboxing and build here:
https://youtu.be/r69wX0Uilgc?t=117
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 05:15 | Subject: | Re: Inventory Change Request for Set 70409-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/gl2y0s5sERQ?t=159
|
30237b shown in the unboxing and build here:
https://youtu.be/EtOEutsTX-4?t=56
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 22:31 | Subject: | Re: Inventory Change Request for Set 75903-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Nubs_Select writes:
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/6al2aT-zItE?t=154
|
|
30237b shown in the unboxing and build here:
https://youtu.be/DgVMVMEhzAU?t=100
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 22:04 | Subject: | Re: Inventory Change Request for Set 10687-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Nubs_Select writes:
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Red Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Red Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/e5A4B2elSuA?t=269
|
|
30237b shown in the unboxing and build here:
https://youtu.be/NBPG9enZr1Y?t=108
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 15:33 | Subject: | Re: Stickers Package Type | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, Give.Me.A.Brick writes:
| In Catalog, randyf writes:
| In Catalog, Give.Me.A.Brick writes:
| Sorry if I have missed something, but who and why is changing Stickers Package
Type from Weight To Volume Bound thus making Instant Checkout unavailable?
Thank you.
|
All paper items in the catalog should be set to Volume Bound according to our
guidelines. Any new sticker sheets, cardboard items, etc. added to the catalog
get set to Volume Bound from the beginning, but ones that we come across in our
travels through the catalog that need to get updated get updated. To solve your
issue, you have a couple of choices. You can change them in your personal store
settings to "Weight Bound"
|
In this last batch of 100+ stickers whose package types were changed to Volume
Bound, many, if not most, of them, I had already set them manually to Weight
Bound in my store. Usually, as soon as I add them to my inventory.
Not something you have control over but I don't think these changes should
override my initial settings.
|
You are right. They definitely should not override your initial settings. If
they do, then that is another "feature" that should be addressed.
|
| or you can add the packing dimensions of the
sticker sheets causing the issues to the catalog.
Cheers,
Randy
|
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 14:04 | Subject: | Re: Stickers Package Type | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, Give.Me.A.Brick writes:
| Sorry if I have missed something, but who and why is changing Stickers Package
Type from Weight To Volume Bound thus making Instant Checkout unavailable?
Thank you.
|
All paper items in the catalog should be set to Volume Bound according to our
guidelines. Any new sticker sheets, cardboard items, etc. added to the catalog
get set to Volume Bound from the beginning, but ones that we come across in our
travels through the catalog that need to get updated get updated. To solve your
issue, you have a couple of choices. You can change them in your personal store
settings to "Weight Bound" or you can add the packing dimensions of the
sticker sheets causing the issues to the catalog.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 11, 2024 13:56 | Subject: | Re: Merge alarm clocks | Viewed: | 44 times | Topic: | Catalog Requests | |
|
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, Saitobricks.ca writes:
| Please merge,
[G=LG11006]
[G=LG11009]
into one entry, with diffent colour options.
Reason, all item are the same, only difference is colour.
|
I'm not 100% confident with this one, for the images don't show all sides,
so there could be differences the images don't show. Like these are different
also (different on the BL images that is).
[g=LG11007]
I found images online though, which do look the same as the other 3. So the BrickLink
image could be a render from a catalog or website and not represent the actual
item.
And then those will be left to merge just because of black instead of white printing.
[g=N10746]
[g=LG11012]
|
You already merged the pocket photo albums that had different printing colors,
so I don't know what the difference would be here.
| I didn't have time to look for more differences.
Although I appreciate it very much that you are looking into this, I would also
appreciate it if you would wait with more requests like these. We already know
that there are more items that can be merged for the same reason, but doing that
takes a lot of time.
The actual merge doesn't take much time.
But before we can merge we have to check if they are indeed 100% the same (except
for the color), then save all info and images of the items that are going to
be merged. All wanted lists and items for sale have to be updated.
And after the merge all this info and images have to be added manually.
So it's not just pressing a button
|
|
|
Author: | randyf | Posted: | Apr 10, 2024 13:50 | Subject: | Re: Item names cut off | Viewed: | 26 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, joshbeagrie writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, Dhobeck writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
And also these
* | | 3070pb296 Tile 1 x 1 with Bright Light Blue Potion Vial with Gold Stopper and Dots and Sparkles on Dark Purple Background Pattern (HP Felix Felicis / Liquid Luck) Parts: Tile, Decorated {White} |
* | | 3070pb304 Tile 1 x 1 with Female Witch Head with Smile, Black Hat and Glasses, and Light Bluish Eyebrows and Hair on Coral Background Pattern (HP Minerva McGonagall) Parts: Tile, Decorated {White} |
|
Also, both now fixed. Thanks again!
|
That's them all fixed thanks Randy
|
Wonderful! 👍
Let me know if you find anymore cut off names.
|
|
Author: | randyf | Posted: | Apr 9, 2024 21:51 | Subject: | Re: Add fig for MetalBeard's Sea Cow set 70810 | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog Requests, Saitobricks.ca writes:
| Please add Metalbeard figure for set
|
This forum topic should only be used for things that cannot be handled through
the standard forms and processes that are available to everyone.
If someone wants to add him to the catalog, they can start here:
https://www.bricklink.com/wantedCatalog.asp?catType=M
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 9, 2024 21:03 | Subject: | Re: Item names cut off | Viewed: | 33 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Saitobricks.ca writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, Saitobricks.ca writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
Thanks to the most diligent admin
|
Thank you. I have an amazing team of fellow admins to work worth, and this site
would not be the same without all of their hard work, too. Combined, the small
lot of us get a lot accomplished. I am just the one who happens to be around
right now.
|
Maybe that’s because your always working
|
Just on the same continent as you. All of the other admins are in Europe and
hopefully sleeping right now.
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:59 | Subject: | Re: Item names cut off | Viewed: | 33 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Dhobeck writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
And also these
* | | 3070pb296 Tile 1 x 1 with Bright Light Blue Potion Vial with Gold Stopper and Dots and Sparkles on Dark Purple Background Pattern (HP Felix Felicis / Liquid Luck) Parts: Tile, Decorated {White} |
* | | 3070pb304 Tile 1 x 1 with Female Witch Head with Smile, Black Hat and Glasses, and Light Bluish Eyebrows and Hair on Coral Background Pattern (HP Minerva McGonagall) Parts: Tile, Decorated {White} |
|
Also, both now fixed. Thanks again!
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:53 | Subject: | Re: Item names cut off | Viewed: | 32 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Dhobeck writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
Found these
* | | 3070pb289 Tile 1 x 1 with Male Head with Smile, Black Eyebrows, Glasses, and Hair, and Medium Nougat Lightning Bolt Scar on Coral Background Pattern (HP Harry Potter) Parts: Tile, Decorated {White} |
* | | 3070pb310 Tile 1 x 1 with Female Head with Smile, Bright Yellow Hair, and Medium Nougat Spectrespecs Glasses on Bright Light Blue Background Pattern (HP Luna Lovegood) Parts: Tile, Decorated {White} |
|
Both fixed. Thank you!
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:51 | Subject: | Re: Item names cut off | Viewed: | 36 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Saitobricks.ca writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
Thanks to the most diligent admin
|
Thank you. I have an amazing team of fellow admins to work worth, and this site
would not be the same without all of their hard work, too. Combined, the small
lot of us get a lot accomplished. I am just the one who happens to be around
right now.
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:23 | Subject: | Re: Item names cut off | Viewed: | 41 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 8, 2024 22:26 | Subject: | Re: Eclipse! It’s started!!! | Viewed: | 47 times | Topic: | Off Topic | |
|
| In Off Topic, Ziegelmeister writes:
| In Off Topic, Saitobricks.ca writes:
It was a good one this year. The filament was huge.
|
I think it's actually called a prominence when it extends out from the sun
and is seen against the black of space. A friend of our family had a major setup
for the event and pretty much had that same exact image from his camera. So damn
cool.
|
|
Author: | randyf | Posted: | Apr 8, 2024 22:19 | Subject: | Re: Eclipse! It’s started!!! | Viewed: | 36 times | Topic: | Off Topic | |
|
| In Off Topic, BrickBuy writes:
| In Off Topic, Saitobricks.ca writes:
It was spectacular!! Here in Central Ohio is was forecasted to be cloudy, but
it was not cloudy at all. Superb visibility, and viewed from our own backyard
with the kids, in the path of totality, just over 2 minutes of full eclipse.
Saw Bailey's beads, felt it become chilly, and birds stopped chirping. Also
saw Jupiter and Venus pop up during the totality, just phenomenal. My second
total eclipse (after Germany 1999).
|
It was definitely incredible here in Ohio! We were also predicted to have a somewhat
cloudy day, but it was absolutely beautiful out. Bright blue skies and just a
few scattered clouds. Not to mention that we finally had a rather nice warm day
to go with it, too!
|
|
Author: | randyf | Posted: | Apr 8, 2024 22:08 | Subject: | Re: Eclipse! It’s started!!! | Viewed: | 56 times | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| In Off Topic, randyf writes:
| In Off Topic, UTLF writes:
| Black hole sun, won't you come
And wash away the rain
|
I was singing that in my back yard with my son while we were watching it happen
It was an absolutely amazing event. Breathtaking and beautiful. I will never forget it.
|
Very nice for you and son, Randy. Hopefully he'll omit from memory your rendition
of that entirely unremarkable song, from what otherwise seemed an amazing moment
for you both.
|
Since him and I were singing it together, hugging each other, and looking at
the sky in unison, I think it is safe to say that both of us got exactly what
we wanted from the moment. But thanks for trying to dictate what him and I should
get from our lives. You are such a pox on this forum.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|