Discussion Forum: Suggestions(Post New Message)
Redisplay Messages: Compact | Brief | All | Full      Show Messages: All | Without Replies

 Author: Saitobricks.ca View Messages Posted By Saitobricks.ca
 Posted: Mar 31, 2024 19:58
 Subject: Re: Setting Orders to Complete!
 Viewed: 26 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, 1001bricks writes:
  In Suggestions, popsicle writes:
  Under Buyer "Change Order Status to Completed - Change the Order
Status Received when you have received your package (but have not yet verified
its contents or there is a problem). When you verify the contents of your package
and consider the order completed, change the order status Completed"


That's a typical 2000 text

Since somewhere later than 2000, I don't have to tell: "I've received
the order, that's unbelievable!!!"

And then after opening the parcel: "Wow, it contains what I paid for!".

Buyer shouldn't HAVE to do this.

We are not Amazon, that’s why buyers are so lazy now.

  Both this concept and Help page are outdated.

1) Fix the Help page(s).

Please do

  2) Disallow the seller to change to Received or Completed.

Why?
Other that the incompetent buyers who are to lazy to do it them selfs I see no
problem.
I like to be able to know that my customers have received their orders.
 Author: popsicle View Messages Posted By popsicle
 Posted: Mar 31, 2024 19:55
 Subject: Re: Setting Orders to Complete!
 Viewed: 47 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, 1001bricks writes:
  In Suggestions, popsicle writes:
  Under Buyer "Change Order Status to Completed - Change the Order
Status Received when you have received your package (but have not yet verified
its contents or there is a problem). When you verify the contents of your package
and consider the order completed, change the order status Completed"


That's a typical 2000 text

Since somewhere later than 2000, I don't have to tell: "I've received
the order, that's unbelievable!!!"

And then after opening the parcel: "Wow, it contains what I paid for!".

Buyer shouldn't HAVE to do this.

Both this concept and Help page are outdated.

1) Fix the Help page(s).
2) Disallow the seller to change to Received or Completed.

It's an updated page:

"This document was last updated on Aug 21, 2023 19:34 by CE_Eric"

But you keep trying... it continues to be fun
 Author: 1001bricks View Messages Posted By 1001bricks
 Posted: Mar 31, 2024 19:49
 Subject: Re: Setting Orders to Complete!
 Viewed: 36 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, popsicle writes:
  Under Buyer "Change Order Status to Completed - Change the Order
Status Received when you have received your package (but have not yet verified
its contents or there is a problem). When you verify the contents of your package
and consider the order completed, change the order status Completed"


That's a typical 2000 text

Since somewhere later than 2000, I don't have to tell: "I've received
the order, that's unbelievable!!!"

And then after opening the parcel: "Wow, it contains what I paid for!".

Buyer shouldn't HAVE to do this.

Both this concept and Help page are outdated.

1) Fix the Help page(s).
2) Disallow the seller to change to Received or Completed.
 Author: popsicle View Messages Posted By popsicle
 Posted: Mar 31, 2024 19:04
 Subject: Re: Setting Orders to Complete!
 Viewed: 51 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, popsicle writes:
  In Suggestions, popsicle writes:
  In Suggestions, Stellar writes:
  In Suggestions, popsicle writes:
  In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa

+1!

  
Rather not, Milissa.

There are fairly common scenarios in which a seller might consider setting a
sent order status to “Completed” Just a few…

1) Buyer leaves positive feedback, but doesn’t change the order status from “Shipped”

Just file it.

  2) Buyer messages seller, thanking and/or offering praise of service or product
without changing the status.

Just file it.

  3) Buyer and seller are in communication over an order issue, which concludes
with the buyer expressing to the seller, their complete satisfaction with the
transaction. Here, the seller might not wish to task the already tasked buyer
further, by asking them to change the status and rather takes care it themself.

Just file it.

  
There are a good many LEGO fans that simply don’t know, don’t care, or don’t
care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine. The changing of order status by the seller simply helps a
vendor clean things up a bit, to stay organized. I does for me anyway.

The only order duty a buyer has is to pay. After that is the seller shipping
it and nothing else, as a commerce platform there is no further need to
do anything else.

What part of this explicit statement of mine...

“There are a good many LEGO fans that simply don’t know, don’t care, or
don’t care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine”


... does not align with the sentiment of your reply, or are you just repeating
back in argumentative form, what’s been expressed? The latter does not advance
discussion

My attitude is relatively the same as yours and Milissa's, never really cared
if my buyers used the status change, not as much as is occasionally expressed
in forum by others. Just rather keep the seller ability in place, is all.

As to order status ‘duties’ and importance: None "need" as you
say, fulfill those. But it is a significant form of communications within a transaction,
helpful to both parties. Otherwise, why bother having the ability for both buyer
and seller.

And let's substitute the term "duties" with tasks, if that
facilitates better understand: https://www.bricklink.com/help.asp?helpID=1138

Opening sentence: "Buyer and Seller each have tasks to complete
during the lifetime of an order"


Under Buyer "Change Order Status to Completed - Change the Order
Status Received when you have received your package (but have not yet verified
its contents or there is a problem). When you verify the contents of your package
and consider the order completed, change the order status Completed"


I've always maintained that I personally don't care if my buyers fulfill
their task, not really, and will gladly handle it when needed.

-popsicle
 Author: 1001bricks View Messages Posted By 1001bricks
 Posted: Mar 31, 2024 18:43
 Subject: Re: Setting Orders to Complete!
 Viewed: 45 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa


Thanks to Cory, I reread the Help:
https://www.bricklink.com/help.asp?helpID=41&q=status

... which says:

Received - Package has been received but the buyer has not yet verified the contents
on the package.

Completed - Package received, contents verified, the order is completed.


So there is no way the seller could decide that the package is received (as tracking
isn't truth like map isn't territory), and / or the order had been verified
by the buyer, and the buyer to agree the order is completed.

In short, as per BrickLink Help it shouldn't be technically allowed for a
seller to change this.

Implementing this would just, in fact, correspond to the terms of the Help /
guidelines / terms of BrickLink.

Or change the BrickLink Help page.
 Author: popsicle View Messages Posted By popsicle
 Posted: Mar 31, 2024 18:41
 Subject: Re: Setting Orders to Complete!
 Viewed: 52 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, popsicle writes:
  In Suggestions, Stellar writes:
  In Suggestions, popsicle writes:
  In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa

+1!

  
Rather not, Milissa.

There are fairly common scenarios in which a seller might consider setting a
sent order status to “Completed” Just a few…

1) Buyer leaves positive feedback, but doesn’t change the order status from “Shipped”

Just file it.

  2) Buyer messages seller, thanking and/or offering praise of service or product
without changing the status.

Just file it.

  3) Buyer and seller are in communication over an order issue, which concludes
with the buyer expressing to the seller, their complete satisfaction with the
transaction. Here, the seller might not wish to task the already tasked buyer
further, by asking them to change the status and rather takes care it themself.

Just file it.

  
There are a good many LEGO fans that simply don’t know, don’t care, or don’t
care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine. The changing of order status by the seller simply helps a
vendor clean things up a bit, to stay organized. I does for me anyway.

The only order duty a buyer has is to pay. After that is the seller shipping
it and nothing else, as a commerce platform there is no further need to
do anything else.

What part of this explicit statement of mine...

“There are a good many LEGO fans that simply don’t know, don’t care, or
don’t care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine”


... does not align with the sentiment of your reply, or are you just repeating
back in argumentative form, what’s been expressed? The latter does not advance
discussion

My attitude is relatively the same as yours and Milissa's, never really cared
if my buyers used the status change, not as much as is occasionally expressed
in forum by others. Just rather keep the seller ability in place, is all.

As to order status ‘duties’ and importance: None "need" as you
say, fulfill those. But it is a significant form of communications within a transaction,
helpful to both parties. Otherwise, why bother having the ability for both buyer
and seller.

And let's substitute the term "duties" with tasks, if that
facilitates better understand: https://www.bricklink.com/help.asp?helpID=1138

-popsicle
 Author: popsicle View Messages Posted By popsicle
 Posted: Mar 31, 2024 18:27
 Subject: Re: Setting Orders to Complete!
 Viewed: 89 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, Stellar writes:
  In Suggestions, popsicle writes:
  In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa

+1!

  
Rather not, Milissa.

There are fairly common scenarios in which a seller might consider setting a
sent order status to “Completed” Just a few…

1) Buyer leaves positive feedback, but doesn’t change the order status from “Shipped”

Just file it.

  2) Buyer messages seller, thanking and/or offering praise of service or product
without changing the status.

Just file it.

  3) Buyer and seller are in communication over an order issue, which concludes
with the buyer expressing to the seller, their complete satisfaction with the
transaction. Here, the seller might not wish to task the already tasked buyer
further, by asking them to change the status and rather takes care it themself.

Just file it.

  
There are a good many LEGO fans that simply don’t know, don’t care, or don’t
care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine. The changing of order status by the seller simply helps a
vendor clean things up a bit, to stay organized. I does for me anyway.

The only order duty a buyer has is to pay. After that is the seller shipping
it and nothing else, as a commerce platform there is no further need to
do anything else.

What part of this explicit statement of mine...

“There are a good many LEGO fans that simply don’t know, don’t care, or
don’t care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine”


... does not align with the sentiment of your reply, or are you just repeating
back in argumentative form, what’s been expressed? The latter does not advance
discussion

My attitude is relatively the same as yours and Milissa's, never really cared
if my buyers used the status change, not as much as is occasionally expressed
in forum by others. Just rather keep the seller ability in place, is all.

As to order status ‘duties’ and importance: None "need" as you
say, fulfill those. But it is a significant form of communications within a transaction,
helpful to both parties. Otherwise, why bother having the ability for both buyer
and seller.
 
 Author: MMillere View Messages Posted By MMillere
 Posted: Mar 31, 2024 09:54
 Subject: Re: Setting Orders to Complete!
 Viewed: 51 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Agreed

Milissa
 Author: Stellar View Messages Posted By Stellar
 Posted: Mar 31, 2024 06:18
 Subject: Re: Setting Orders to Complete!
 Viewed: 70 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, popsicle writes:
  In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa

+1!

  
Rather not, Milissa.

There are fairly common scenarios in which a seller might consider setting a
sent order status to “Completed” Just a few…

1) Buyer leaves positive feedback, but doesn’t change the order status from “Shipped”

Just file it.

  2) Buyer messages seller, thanking and/or offering praise of service or product
without changing the status.

Just file it.

  3) Buyer and seller are in communication over an order issue, which concludes
with the buyer expressing to the seller, their complete satisfaction with the
transaction. Here, the seller might not wish to task the already tasked buyer
further, by asking them to change the status and rather takes care it themself.

Just file it.

  
There are a good many LEGO fans that simply don’t know, don’t care, or don’t
care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine. The changing of order status by the seller simply helps a
vendor clean things up a bit, to stay organized. I does for me anyway.

The only order duty a buyer has is to pay. After that is the seller shipping
it and nothing else, as a commerce platform there is no further need to
do anything else.

  
But just an opinion based on my experience as a BL vendor, and very obviously
not that some other sellers.

-popsicle
 Author: Nubs_Select View Messages Posted By Nubs_Select
 Posted: Mar 30, 2024 13:17
 Subject: Re: Setting Orders to Complete!
 Viewed: 50 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa

Yes. There are no legitimate cases for sellers to ever mark an order as completed.
Even if the buyer says they got their order and are happy it still is no reason
then up to the seller to mark it as complete. Those orders would then just fall
into the same category as the other ~50% of orders that would be in the exact
same circumstance aside for the message. And on the flip side letting the seller
mark it as complete can make things much more difficult for buyers. Just like
a buyer can’t change the order status from paid to shipped the seller should
not be allowed to change it from shipped to completed
 Author: popsicle View Messages Posted By popsicle
 Posted: Mar 30, 2024 13:08
 Subject: Re: Setting Orders to Complete!
 Viewed: 60 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa

Rather not, Milissa.

There are fairly common scenarios in which a seller might consider setting a
sent order status to “Completed” Just a few…

1) Buyer leaves positive feedback, but doesn’t change the order status from “Shipped”
2) Buyer messages seller, thanking and/or offering praise of service or product
without changing the status.
3) Buyer and seller are in communication over an order issue, which concludes
with the buyer expressing to the seller, their complete satisfaction with the
transaction. Here, the seller might not wish to task the already tasked buyer
further, by asking them to change the status and rather takes care it themself.

There are a good many LEGO fans that simply don’t know, don’t care, or don’t
care to know about order status 'duties’ and just wanna buy LEGO, that’s
it. Which is fine. The changing of order status by the seller simply helps a
vendor clean things up a bit, to stay organized. I does for me anyway.

But just an opinion based on my experience as a BL vendor, and very obviously
not that some other sellers.

-popsicle
 Author: 1001bricks View Messages Posted By 1001bricks
 Posted: Mar 30, 2024 12:31
 Subject: Re: Setting Orders to Complete!
 Viewed: 52 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, MMillere writes:
  Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa

YES - same for Received. Tracking doesn't mean actually received.
 Author: MMillere View Messages Posted By MMillere
 Posted: Mar 30, 2024 09:21
 Subject: Setting Orders to Complete!
 Viewed: 301 times
 Topic: Suggestions
 Status:Open
 Vote:[Yes|No]
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Since sellers are NOT supposed to set orders to Complete.....

Can we make it so they can't?

Because when a seller does it by mistake, we can not send a ship notice thru
the system

Thanx

Milissa
 Author: joshlobe View Messages Posted By joshlobe
 Posted: Mar 29, 2024 16:15
 Subject: Re: Message Limit And Seller Communication Issue
 Viewed: 54 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Original thread, here:
https://www.bricklink.com/messageThread.asp?ID=355637&nID=1461942

In Suggestions, joshlobe writes:
  About two weeks ago, I made 23 purchases (carts) over two days.
One of those sellers is MIA, and has not changed the cart status from "paid",
nor is replying to any messages.

So today, I decide to create another wishlist and add those items again.
This split down into two carts.
Since Easter is Sunday, I messaged the sellers directly, pre-purchase, to inquire
about expedited shipping methods, and if they were able to physically fulfill
the order on such short notice.
While corresponding with two separate sellers; I tried to reply, and was told
"Oops, you have exceeded your message limit.".

This created a "frantic" situation for me; as I was already against the
clock. I had to figure out how to message them off-site, and finish my pre-purchase
conversations.

I understand bots and reasons for security measures.
But it feels this ones a little too tight, as I had already made 23 purchases
before this happened.
 Author: joshlobe View Messages Posted By joshlobe
 Posted: Mar 29, 2024 16:13
 Subject: Message Limit And Seller Communication Issue
 Viewed: 104 times
 Topic: Suggestions
 Status:Open
 Vote:[Yes|No]
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
About two weeks ago, I made 23 purchases (carts) over two days.
One of those sellers is MIA, and has not changed the cart status from "paid",
nor is replying to any messages.

So today, I decide to create another wishlist and add those items again.
This split down into two carts.
Since Easter is Sunday, I messaged the sellers directly, pre-purchase, to inquire
about expedited shipping methods, and if they were able to physically fulfill
the order on such short notice.
While corresponding with two separate sellers; I tried to reply, and was told
"Oops, you have exceeded your message limit.".

This created a "frantic" situation for me; as I was already against the
clock. I had to figure out how to message them off-site, and finish my pre-purchase
conversations.

I understand bots and reasons for security measures.
But it feels this ones a little too tight, as I had already made 23 purchases
before this happened.
 Author: Brickman4you View Messages Posted By Brickman4you
 Posted: Mar 27, 2024 10:45
 Subject: Re: US stores only
 Viewed: 35 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, arminikonic writes:
  Why is it that i can set default condition (used or new) when searching things,
but the list of stores from different countries is not an option. i want to look
at just the USA stores, nothing more or less. let me set a default for everything,
or USA only when searching..

There are two issues that keep getting voiced here in 'Suggestions':

- Nobody actually uses 'easy buy' because you can't select Country
/ region.

- You can't save a default location on 'Items for sale' tab.
 Author: joshlobe View Messages Posted By joshlobe
 Posted: Mar 26, 2024 13:09
 Subject: Re: Buyers orders page sellers store name
 Viewed: 37 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, steelwoolghandi writes:
  
That looks Awesome! Really nice job, be sure to post pictures of the completed
house.

Thank you so very much!
I took a lot of inspiration from fellow lego enthusiasts via YouTube.
Lol.. I knew when I was watching a video of a 9 year old showing me how to put
together a miniature lawnmower (at about 3am)... I had reached an entirely new
level of Lego-nerdiness

I'll certainly post more as the project completes.
Be well and thanks again!
 Author: steelwoolghandi View Messages Posted By steelwoolghandi
 Posted: Mar 26, 2024 12:32
 Subject: Re: Buyers orders page sellers store name
 Viewed: 31 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, joshlobe writes:
  In Suggestions, bricksahead writes:
  On the following page in the drop down menu "Show Seller as" you may
choose from "Username, Name or Store Name".

Yes, the emails from seller, Paypal and Bricklink might be confusing. Not sure
what to suggest.

https://www.bricklink.com/orderPlaced.asp

... I would like to see your childhood home built in LEGO. It sounds great.

In Suggestions, joshlobe writes:
  I'm in my mid 40's and recently designed my childhood home on stud.io.
Super amazing software. As a cad/cam engineer and software developer myself,
it was a delight!

So, my house has over 8,000 pieces, which resulted in numerous orders through
BrickLink.
After placing over 20 orders, I receive multiple emails.
One from Bricklink for each purchase.
One from PayPal for each purchase.
Another from BrickLink once the order has shipped.
Another from PayPal once the order has shipped.

Each of these emails use various names, or email address, or store names.
It's confusing to identify which email goes with which order.
I often find myself scrolling through emails, looking for a store username, so
I can match it to my BrickLink orders page.

MY SUGGESTION:

Please add the sellers store name (perhaps under the username?) on the buyers
orders page.
This would seriously help with identifying which order goes with which email,
without having to physically click into each order, and find the store name.

Alternatively, if maintaining a single row on the orders page is preferred, could
we maybe add the store name as a "hover" when mousing over the store
username?

Thank you for the consideration.

My apologies.
I just saw the last bit about seeing the house.
That's really awesome that you asked!
I haven't shown anyone yet, so you're the first

I still need...
1) Extend the back yard.. we had over 4 acres, and I'd like to make the wooded
area.
2) Add a street along the front of the house. We played on that street all the
time.
3) Put the entire model on raised plates that can be joined together in sections.
4) Add the roof, chimney, etc.
5) put all the branches and leaves on the tree, but I wanted to leave that until
last. I have nightmares of the trees breaking apart while trying to redesign
the model onto baseplates.. lol.

That looks Awesome! Really nice job, be sure to post pictures of the completed
house.
 Author: joshlobe View Messages Posted By joshlobe
 Posted: Mar 26, 2024 11:01
 Subject: Re: Buyers orders page sellers store name
 Viewed: 36 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, bricksahead writes:
  On the following page in the drop down menu "Show Seller as" you may
choose from "Username, Name or Store Name".

Yes, the emails from seller, Paypal and Bricklink might be confusing. Not sure
what to suggest.

https://www.bricklink.com/orderPlaced.asp

... I would like to see your childhood home built in LEGO. It sounds great.

In Suggestions, joshlobe writes:
  I'm in my mid 40's and recently designed my childhood home on stud.io.
Super amazing software. As a cad/cam engineer and software developer myself,
it was a delight!

So, my house has over 8,000 pieces, which resulted in numerous orders through
BrickLink.
After placing over 20 orders, I receive multiple emails.
One from Bricklink for each purchase.
One from PayPal for each purchase.
Another from BrickLink once the order has shipped.
Another from PayPal once the order has shipped.

Each of these emails use various names, or email address, or store names.
It's confusing to identify which email goes with which order.
I often find myself scrolling through emails, looking for a store username, so
I can match it to my BrickLink orders page.

MY SUGGESTION:

Please add the sellers store name (perhaps under the username?) on the buyers
orders page.
This would seriously help with identifying which order goes with which email,
without having to physically click into each order, and find the store name.

Alternatively, if maintaining a single row on the orders page is preferred, could
we maybe add the store name as a "hover" when mousing over the store
username?

Thank you for the consideration.

My apologies.
I just saw the last bit about seeing the house.
That's really awesome that you asked!
I haven't shown anyone yet, so you're the first

I still need...
1) Extend the back yard.. we had over 4 acres, and I'd like to make the wooded
area.
2) Add a street along the front of the house. We played on that street all the
time.
3) Put the entire model on raised plates that can be joined together in sections.
4) Add the roof, chimney, etc.
5) put all the branches and leaves on the tree, but I wanted to leave that until
last. I have nightmares of the trees breaking apart while trying to redesign
the model onto baseplates.. lol.
 








 Author: joshlobe View Messages Posted By joshlobe
 Posted: Mar 26, 2024 10:50
 Subject: Re: Buyers orders page sellers store name
 Viewed: 37 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, bricksahead writes:
  On the following page in the drop down menu "Show Seller as" you may
choose from "Username, Name or Store Name".

Yes, the emails from seller, Paypal and Bricklink might be confusing. Not sure
what to suggest.

https://www.bricklink.com/orderPlaced.asp

... I would like to see your childhood home built in LEGO. It sounds great.

In Suggestions, joshlobe writes:
  I'm in my mid 40's and recently designed my childhood home on stud.io.
Super amazing software. As a cad/cam engineer and software developer myself,
it was a delight!

So, my house has over 8,000 pieces, which resulted in numerous orders through
BrickLink.
After placing over 20 orders, I receive multiple emails.
One from Bricklink for each purchase.
One from PayPal for each purchase.
Another from BrickLink once the order has shipped.
Another from PayPal once the order has shipped.

Each of these emails use various names, or email address, or store names.
It's confusing to identify which email goes with which order.
I often find myself scrolling through emails, looking for a store username, so
I can match it to my BrickLink orders page.

MY SUGGESTION:

Please add the sellers store name (perhaps under the username?) on the buyers
orders page.
This would seriously help with identifying which order goes with which email,
without having to physically click into each order, and find the store name.

Alternatively, if maintaining a single row on the orders page is preferred, could
we maybe add the store name as a "hover" when mousing over the store
username?

Thank you for the consideration.

Lmao.
How on earth did I miss that option.
I must admit, this site has little hidden options all over the place.
I'll be more attentive before posting next time

That's exactly what I needed.
Thank you so much!
 Author: bricksahead View Messages Posted By bricksahead
 Posted: Mar 26, 2024 10:46
 Subject: Re: Buyers orders page sellers store name
 Viewed: 42 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
On the following page in the drop down menu "Show Seller as" you may
choose from "Username, Name or Store Name".

Yes, the emails from seller, Paypal and Bricklink might be confusing. Not sure
what to suggest.

https://www.bricklink.com/orderPlaced.asp

... I would like to see your childhood home built in LEGO. It sounds great.

In Suggestions, joshlobe writes:
  I'm in my mid 40's and recently designed my childhood home on stud.io.
Super amazing software. As a cad/cam engineer and software developer myself,
it was a delight!

So, my house has over 8,000 pieces, which resulted in numerous orders through
BrickLink.
After placing over 20 orders, I receive multiple emails.
One from Bricklink for each purchase.
One from PayPal for each purchase.
Another from BrickLink once the order has shipped.
Another from PayPal once the order has shipped.

Each of these emails use various names, or email address, or store names.
It's confusing to identify which email goes with which order.
I often find myself scrolling through emails, looking for a store username, so
I can match it to my BrickLink orders page.

MY SUGGESTION:

Please add the sellers store name (perhaps under the username?) on the buyers
orders page.
This would seriously help with identifying which order goes with which email,
without having to physically click into each order, and find the store name.

Alternatively, if maintaining a single row on the orders page is preferred, could
we maybe add the store name as a "hover" when mousing over the store
username?

Thank you for the consideration.
 Author: ilovelegostoo View Messages Posted By ilovelegostoo
 Posted: Mar 26, 2024 10:39
 Subject: Re: US stores only
 Viewed: 23 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
This helps with the Price Guide tab. Store settings are about 2/3 the way down
the page. https://www.bricklink.com/priceGuideSettings.asp
 Author: joshlobe View Messages Posted By joshlobe
 Posted: Mar 26, 2024 10:35
 Subject: Buyers orders page sellers store name
 Viewed: 123 times
 Topic: Suggestions
 Status:Open
 Vote:[Yes|No]
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
I'm in my mid 40's and recently designed my childhood home on stud.io.
Super amazing software. As a cad/cam engineer and software developer myself,
it was a delight!

So, my house has over 8,000 pieces, which resulted in numerous orders through
BrickLink.
After placing over 20 orders, I receive multiple emails.
One from Bricklink for each purchase.
One from PayPal for each purchase.
Another from BrickLink once the order has shipped.
Another from PayPal once the order has shipped.

Each of these emails use various names, or email address, or store names.
It's confusing to identify which email goes with which order.
I often find myself scrolling through emails, looking for a store username, so
I can match it to my BrickLink orders page.

MY SUGGESTION:

Please add the sellers store name (perhaps under the username?) on the buyers
orders page.
This would seriously help with identifying which order goes with which email,
without having to physically click into each order, and find the store name.

Alternatively, if maintaining a single row on the orders page is preferred, could
we maybe add the store name as a "hover" when mousing over the store
username?

Thank you for the consideration.
 
 Author: Ziegelmeister View Messages Posted By Ziegelmeister
 Posted: Mar 26, 2024 03:00
 Subject: Re: US stores only
 Viewed: 37 times
 Topic: Suggestions
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
In Suggestions, arminikonic writes:
  Why is it that i can set default condition (used or new) when searching things,
but the list of stores from different countries is not an option. i want to look
at just the USA stores, nothing more or less. let me set a default for everything,
or USA only when searching..

Look up the piece you want, I'll just randomly pick 4073

Below the image of the piece (and related items) are a few tabs.

Click the left one (items for sale).

Click more options below that on the right.

Click "seller location": USA.

I'm not sure if you can limit that in your settings, but I know you can when
you use the right tab under "price guide". As I store I set that up
so I can quickly go check my prices against everyone else and raise or lower
prices based on other US based stores.
 Author: arminikonic View Messages Posted By arminikonic
 Posted: Mar 26, 2024 01:42
 Subject: US stores only
 Viewed: 95 times
 Topic: Suggestions
 Status:Open
 Vote:[Yes|No]
View Message
View
Cancel Message
Cancel
Reply to Message
Reply
Why is it that i can set default condition (used or new) when searching things,
but the list of stores from different countries is not an option. i want to look
at just the USA stores, nothing more or less. let me set a default for everything,
or USA only when searching..

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More