Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | paulvdb | Posted: | Jun 28, 2023 16:44 | Subject: | Re: alternate item number or new item? | Viewed: | 23 times | Topic: | Catalog | |
|
| In Catalog, Nubs_Select writes:
| In Catalog, paulvdb writes:
| I got new mold 78131 in set 41747. Should this be added as a new item or as
an alternate item number for
The catalog image for 40243 shows only the top and I don't have one in my
collection to compare it so I don't know if there are any differences at
the bottom. Comparing mine to the catalog photos I can see that 78131 has the
mold pip in a different position in the circle where it connects to the step.
There is also a small indentation in the raised edge of the circle where it connects
to the step. I've attached photos of the top and bottom so that anyone who
has 40243 can check for differences.
|
|
Thanks for your photos. Looking at the bottom I see that the supports connecting
the inner and outer circle are a bit thicker in the new one. And I guess I should
also have checked all the parts in my set. I had noticed that Brickset listed
a new mold number for this part, so when I opened my set I immediately opened
bag 2 to see if that's what I got. Now that I got to building bag 2 I noticed
that I also got two of the old 40243 in addition to the six 78131.
|
|
Author: | paulvdb | Posted: | Jun 28, 2023 15:03 | Subject: | alternate item number or new item? | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| I got new mold 78131 in set 41747. Should this be added as a new item or as
an alternate item number for
The catalog image for 40243 shows only the top and I don't have one in my
collection to compare it so I don't know if there are any differences at
the bottom. Comparing mine to the catalog photos I can see that 78131 has the
mold pip in a different position in the circle where it connects to the step.
There is also a small indentation in the raised edge of the circle where it connects
to the step. I've attached photos of the top and bottom so that anyone who
has 40243 can check for differences.
|
|
|
Author: | paulvdb | Posted: | Jun 27, 2023 10:39 | Subject: | Re: Please add alternate item number | Viewed: | 28 times | Topic: | Catalog Requests | |
|
| In Catalog Requests, Turez writes:
| In Catalog Requests, paulvdb writes:
| Please add 3338 as alternate item number for
Set 60363 has 3338 molded on the part. I did not notice any differences with
the old mold other than the fact that it has a different number.
|
Maybe a different sprue mark position?
|
That is correct. The old one has it on the top. The new one has it on the side
near the bottom.
|
|
Author: | paulvdb | Posted: | Jun 27, 2023 09:47 | Subject: | Please add alternate item number | Viewed: | 54 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Please add 3338 as alternate item number for
Set 60363 has 3338 molded on the part. I did not notice any differences with
the old mold other than the fact that it has a different number.
|
|
Author: | paulvdb | Posted: | Jun 25, 2023 08:25 | Subject: | Inventory Change Request for Set 7249-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 4 Part Yellow {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 25, 2023 08:01 | Subject: | Inventory Change Request for Set 60112-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 11213c02 Light Bluish Gray Turntable 6 x 6 x 2/3 with Black Square Base, Free-Spinning (11213 / 61485) (Counterpart)
|
|
Author: | paulvdb | Posted: | Jun 25, 2023 07:48 | Subject: | Inventory Change Request for Set 60112-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part White {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 24, 2023 10:08 | Subject: | Inventory Change Request for Set 60160-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 23, 2023 16:33 | Subject: | Inventory Change Request for Set 60162-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 2 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
* Change 1 Part Red {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 19, 2023 08:26 | Subject: | Re: 150 euro | Viewed: | 61 times | Topic: | Help | |
|
| In Help, ZPStore_bricks writes:
| Can you help me understand why this message is displayed to buyers? I have no
such restrictions in the store settings!
I wrote in support of the bricklink, but they answered me that I was in the order
of setting up the store. And buyers write that they cannot place an order for
less than 150 euros.
|
You do not have any onsite payment methods in your store. That means that Bricklink
cannot collect the VAT that they have to collect on orders from buyers in the
EU for order values below 150 EUR. For order values above 150 EUR the buyer has
to pay that VAT to the shipping company so you don't need an onsite payment
method for orders above 150 EUR.
|
|
Author: | paulvdb | Posted: | Jun 19, 2023 00:01 | Subject: | Re: Inventory Change Request for Set 70436-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mattovermyer writes:
| Please make changes to the following inventory:
* Add 2 Part 22484 Dark Bluish Gray Bar 1L with Tow Ball
Comments from Submitter:
Instructions page 13
|
They are already included in the inventory of the minifigure
|
|
Author: | paulvdb | Posted: | Jun 18, 2023 15:53 | Subject: | Inventory Change Request for Set 60044-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
Source: set in my personal collections that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 16, 2023 13:14 | Subject: | Inventory Change Request for Set 60110-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Red {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 14, 2023 17:19 | Subject: | Inventory Change Request for Set 41693-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
* Change 1 Part Black {25893u Plate, Round 1 x 1 with Bar Handle (Undetermined Type) to 79194 Plate, Round 1 x 1 with Bar Handle on Long Stem}
* Change 1 Part Black {25893u Plate, Round 1 x 1 with Bar Handle (Undetermined Type) to 79194 Plate, Round 1 x 1 with Bar Handle on Long Stem} (Extra)
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets (the same one that I used when I originally submitted the inventory for this set).
|
|
Author: | paulvdb | Posted: | Jun 13, 2023 04:57 | Subject: | Re: Inventory Change Request for Set 854-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 1 Part 3023 Black Plate 1 x 2 (Extra)
* Add 1 Part 3704 Black Technic, Axle 2L (Extra)
* Add 1 Part 3023 Blue Plate 1 x 2 (Extra)
* Add 1 Part 3069b Blue Tile 1 x 2 with Groove (Extra)
* Add 1 Part 3068b Blue Tile 2 x 2 with Groove (Extra)
* Add 1 Part 3023 Light Gray Plate 1 x 2 (Extra)
* Add 2 Part 3713 Light Gray Technic Bush (Extra)
* Add 2 Part 3651 Light Gray Technic, Axle and Pin Connector (Extra)
* Add 1 Part 3062b Red Brick, Round 1 x 1 Open Stud (Extra)
Comments from Submitter:
Source: mostly sealed set. The plastic cover was partly loose on the left side, but most of the inside of the box was still basically impossible to reach, especially the right side compartment that contained most of these extra parts. So I am confident that contents of the box are all original.
|
This is strange.
I had a sealed one but did not see any blue tile through the lid.
I also have photos for few sealed ones and cannot spot any blue tile. The extra
blue tiles are strange for this set.
Is this semi sealed source 100% reliable? Could the tiles got sneaked through
the lid?
|
You didn't see any blue tile? Not even the ones in the regular section of
the inventory? Then I guess they must have all been at the bottom of the compartment
in those sets. My set had thee each of the 1x2 and 2x2 tiles. Not sure if these
were intentional extras or packing errors. But I also got extra 1x2 plates which
are unusual extras so I'm assuming the extra tiles were also intentional.
I suppose in theory someone could have snuck some extra parts into the right
side compartment but I don't see why they would do that, especially when
it would have been impossible with bare hands and would have required using plyers
or something like that to sneak them through the very small space under the lid.
|
|
Author: | paulvdb | Posted: | Jun 12, 2023 10:28 | Subject: | Re: Inventory Change Request for Set 854-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| Stupid me ; I asked about the wrong plates, it was for the regular blue 2x4
plates. What is their underside? Pat Pend erased? Or just mold numbers? Do they
have a mold pip on the side or in the logo?
|
Just mold numbers on the bottom. Mold pip in the logo.
|
|
Author: | paulvdb | Posted: | Jun 12, 2023 08:00 | Subject: | Re: Inventory Change Request for Set 854-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 1 Part 3023 Black Plate 1 x 2 (Extra)
* Add 1 Part 3704 Black Technic, Axle 2L (Extra)
* Add 1 Part 3023 Blue Plate 1 x 2 (Extra)
* Add 1 Part 3069b Blue Tile 1 x 2 with Groove (Extra)
* Add 1 Part 3068b Blue Tile 2 x 2 with Groove (Extra)
* Add 1 Part 3023 Light Gray Plate 1 x 2 (Extra)
* Add 2 Part 3713 Light Gray Technic Bush (Extra)
* Add 2 Part 3651 Light Gray Technic, Axle and Pin Connector (Extra)
* Add 1 Part 3062b Red Brick, Round 1 x 1 Open Stud (Extra)
Comments from Submitter:
Source: mostly sealed set. The plastic cover was partly loose on the left side, but most of the inside of the box was still basically impossible to reach, especially the right side compartment that contained most of these extra parts. So I am confident that contents of the box are all original.
|
Hi Paul
great!
Was there a catalogue? If yes which one was it.
|
| What is the underside of the blue 2x4 technic plates?
|
Anything specific I should be looking for? They have mold numbers on the underside.
|
|
Author: | paulvdb | Posted: | Jun 11, 2023 15:02 | Subject: | Re: Inventory Change Request for Set 9468-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SylvainLS writes:
| In Inventories Requests, randyf writes:
Interesting. I thought the procedure was to have an alternate minifigure instead.
Like in
|
In most cases that is true. But the exception is when the only difference is
the stud-type of the head. Because otherwise we'd get loads of alternate
minifigures from the transition period between blocked open stud and hollow stud.
|
|
Author: | paulvdb | Posted: | Jun 11, 2023 08:19 | Subject: | Inventory Change Request for Set 854-1 | Viewed: | 42 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3023 Black Plate 1 x 2 (Extra)
* Add 1 Part 3704 Black Technic, Axle 2L (Extra)
* Add 1 Part 3023 Blue Plate 1 x 2 (Extra)
* Add 1 Part 3069b Blue Tile 1 x 2 with Groove (Extra)
* Add 1 Part 3068b Blue Tile 2 x 2 with Groove (Extra)
* Add 1 Part 3023 Light Gray Plate 1 x 2 (Extra)
* Add 2 Part 3713 Light Gray Technic Bush (Extra)
* Add 2 Part 3651 Light Gray Technic, Axle and Pin Connector (Extra)
* Add 1 Part 3062b Red Brick, Round 1 x 1 Open Stud (Extra)
Comments from Submitter:
Source: mostly sealed set. The plastic cover was partly loose on the left side, but most of the inside of the box was still basically impossible to reach, especially the right side compartment that contained most of these extra parts. So I am confident that contents of the box are all original.
|
|
Author: | paulvdb | Posted: | Jun 11, 2023 08:11 | Subject: | Inventory Change Request for Set 8842-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 14 Part 2780 Black Technic, Pin with Short Friction Ridges (Alternate) (match ID 1)
* Add 1 Part 3024 Light Gray Plate 1 x 1 (Extra)
* Add 1 Part 3749 Light Gray Technic, Axle 1L with Pin without Friction Ridges (Extra)
* Add 1 Part 4265a Light Gray Technic Bush 1/2 Toothed, Four Interior Ridges (Extra)
* Add 1 Part 4274 Light Gray Technic, Pin 1/2 without Friction Ridges (Extra)
* Change 14 Part Black 4459 Technic, Pin with Long Friction Ridges {match ID 0 to 1}
Comments from Submitter:
Source: sealed set.
|
|
Author: | paulvdb | Posted: | Jun 11, 2023 06:28 | Subject: | Inventory Change Request for Set 70165-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole} (Extra)
Comments from Submitter:
Forgot to also change the extra one to 6628a.
|
|
Author: | paulvdb | Posted: | Jun 11, 2023 04:57 | Subject: | Inventory Change Request for Set 3842-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part White {4599 Tap 1 x 1 (Undetermined Type) to 4599a Tap 1 x 1 with Hole in Nozzle End}
Comments from Submitter:
Source: my sealed set had a mix of 4599a and 4599b.
|
|
Author: | paulvdb | Posted: | Jun 10, 2023 11:48 | Subject: | Inventory Change Request for Set 70165-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3680c02 White Turntable 2 x 2 Plate with Light Bluish Gray Top (3680 / 3679) (Counterpart)
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 22 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: sealed set.
|
|
Author: | paulvdb | Posted: | Jun 4, 2023 07:24 | Subject: | Inventory Change Request for Set 41314-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
* Change 1 Part White {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 4, 2023 03:45 | Subject: | Inventory Change Request for Set 31026-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Red {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Jun 3, 2023 03:23 | Subject: | Re: Inventory Change Request for Minifigure div005 | Viewed: | 34 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, tmvp33 writes:
| Please make changes to the following inventory:
* Delete 1 Part 973px98c01 White Torso Divers Dolphin Logo and Fish Pattern / Yellow Arms / Yellow Hands
* Add 1 Part 973px38c01 White Torso Divers Dolphin Logo Pattern / Yellow Arms / Yellow Hands
Comments from Submitter:
I own the set 6559 and noticed that the torso for this diver is wrong, probably due to the fact that the life jacket covers the image and there is no way to confirm it from the instructions or otherwise.
|
I don't own 6559 but I own the other set that this figure came in, 6558.
The current inventory is correct for set 6558 so if set 6559 has a different
torso a new minifigure should be added to the catalog.
|
|
Author: | paulvdb | Posted: | Jun 2, 2023 13:26 | Subject: | Re: How does BL process EFT refund? | Viewed: | 27 times | Topic: | Problem Order | |
|
| In Problem Order, mooselover writes:
| I just had a situation where the buyer and me agreed to cancel an order so the
buyer could then revise the order and place a new one.
The buyer had already paid for the order via EFT (Canada).
I canceled the order and went through all the steps on the "Manage Refund"
portion of the order page. The order no longer shows up on my FEES page, so I
know that BL has completed the cancellation.
My question is, does BL initiate the EFT transfer of the funds back to the buyer,
or do I need to do that myself?
If BL does it, how long does that usually take? The buyer has already paid for
the revised order, but I want to make sure that he's not out the money for
the original order for very long - but I also don't want to transfer the
money to him if BL is going to do it again.
Thanks in advance for your answers.
Jim @ East Wing YYC
|
Bricklink can only initiate refunds for onsite payments through Paypal or Stripe.
If the buyer used an offsite payment method you'll have to do the refund
yourself.
|
|
Author: | paulvdb | Posted: | May 22, 2023 01:38 | Subject: | Re: 4528776, Dark or Light Bluish Gray? | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, WOLKsite writes:
| PCC 4528776 (part 53989) is set as "Light Bluish Gray". However, LEGO's
database has it as Dark Stone Grey (Dark Bluish Gray). Is this an error? Or is
there some contradictory listing in an instruction manual?
|
Seems like it must be an error. Light Bluish Gray is not even listed as a known
color for this part.
|
|
Author: | paulvdb | Posted: | May 20, 2023 05:39 | Subject: | Inventory Change Request for Set 856-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {4 to 6} Part Yellow 3010 Brick 1 x 4
* Change {2 to 4} Part Yellow 3008 Brick 1 x 8
Comments from Submitter:
These quantities were included in my used set and the additional bricks are shown in the instructions for motorizing the main model with Power Pack 870.
|
|
Author: | paulvdb | Posted: | May 11, 2023 16:49 | Subject: | Re: Inventory Change Request for Set 6345-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 1 Part 4265b Light Gray Technic Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 1)
* Add 1 Part 4265b Light Gray Technic Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 2)
* Add 3 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 3)
* Add 1 Minifigure par050a Red Halter Top - Blue Legs, Black Ponytail Hair, Closed Mouth (Alternate) (match ID 4)
* Add 1 Minifigure trn015 Jogging Suit, Light Gray Legs, Black Ponytail Hair, Closed Mouth (Alternate) (match ID 5)
* Add 1 Part 4592c02 Red Antenna Small Base with Black Lever (4592 / 4593) (Extra)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
* Add 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard (Extra)
* Change 1 Part Light Gray 4265a Technic Bush 1/2 Toothed, Four Interior Ridges {match ID 0 to 1}
* Change 3 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 3}
* Change 1 Minifigure par050 Red Halter Top - Blue Legs, Black Ponytail Hair, Open Mouth {match ID 0 to 4}
* Change 1 Minifigure twn007 Jogging Suit, Light Gray Legs, Black Ponytail Hair, Open Mouth {match ID 0 to 5}
Comments from Submitter:
Source: sealed set contents. My set had heads with closed mouth, light gray 4265b and red 2412a. The blue and white ones were 2412b. Please change the match ID for the extra 4265a to 2.
|
So
and
are correct for your set?
|
Both cones have open studs.
|
|
Author: | paulvdb | Posted: | May 11, 2023 12:49 | Subject: | Inventory Change Request for Set 7814-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {3001 Brick 2 x 4 to 3001old Brick 2 x 4 without Cross Supports}
Comments from Submitter:
Source: set in my personal collection that was originally bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | May 11, 2023 12:46 | Subject: | Inventory Change Request for Set 6926-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 1 Part Blue {3002 Brick 2 x 3 to 3002old Brick 2 x 3 without Cross Supports}
Comments from Submitter:
Source: set in my personal collection that was originally bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | May 11, 2023 12:43 | Subject: | Inventory Change Request for Set 6345-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4265b Light Gray Technic Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 1)
* Add 1 Part 4265b Light Gray Technic Bush 1/2 Toothed, Two Interior Ridges (Alternate) (match ID 2)
* Add 3 Part 2412a Red Tile, Modified 1 x 2 Grille without Bottom Groove / Lip (match ID 3)
* Add 1 Minifigure par050a Red Halter Top - Blue Legs, Black Ponytail Hair, Closed Mouth (Alternate) (match ID 4)
* Add 1 Minifigure trn015 Jogging Suit, Light Gray Legs, Black Ponytail Hair, Closed Mouth (Alternate) (match ID 5)
* Add 1 Part 4592c02 Red Antenna Small Base with Black Lever (4592 / 4593) (Extra)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
* Add 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard (Extra)
* Change 1 Part Light Gray 4265a Technic Bush 1/2 Toothed, Four Interior Ridges {match ID 0 to 1}
* Change 3 Part Red 2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip {Regular to Alternate} {match ID 0 to 3}
* Change 1 Minifigure par050 Red Halter Top - Blue Legs, Black Ponytail Hair, Open Mouth {match ID 0 to 4}
* Change 1 Minifigure twn007 Jogging Suit, Light Gray Legs, Black Ponytail Hair, Open Mouth {match ID 0 to 5}
Comments from Submitter:
Source: sealed set contents. My set had heads with closed mouth, light gray 4265b and red 2412a. The blue and white ones were 2412b. Please change the match ID for the extra 4265a to 2.
|
|
Author: | paulvdb | Posted: | May 11, 2023 04:27 | Subject: | Re: Inventories Verifier | Viewed: | 30 times | Topic: | Inventories | |
|
| In Inventories, randyf writes:
| In Inventories, Ziegelmeister writes:
| I figured it's time I start contributing to the inventories. Two copies
of 75352 arrived today and it looks like it's reserved. I was going to go
part them out anyway to verify the inventory but it looks like I need to be an
inventory verifier first yea?
Reading the instructions on how to do that, it looks like I would need to be
the first to reserve new sets and/or submit "a large number of" change
requests. So since I can't verify the inventory, just keep parting it all
out and then see if there are any errors to correct in order to build cred?
|
Yep.
However, it is very hard to correct modern inventories that are usually close
to 100% correct. So correcting older inventories pre-2020 would be where you
would mostly look for things to fix. Having said that, it is getting harder each
year to find older inventories that need correcting as they get are continually
being updated from many helpful members that buy sealed old sets and rip them
open for the greater good of the catalog.
|
For modern sets the only corrections that are usually needed are new molds or
prints that can sometimes be found in later production runs and should be added
as alternates to the inventory.
|
|
Author: | paulvdb | Posted: | May 7, 2023 16:10 | Subject: | Re: 6680 regarding part 3839a or b | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, BricksHolland writes:
| Hello Bl says that in ambulance set 6680 there is part 3839a (mid atttachment)
while there is other sites that say its 3839b (low attachment). Some do not specify
also
So which is it because bl doesnt give an alt.
wkr,
Ronald
|
My own set (originally bought sealed and never mixed with parts from other sets)
has 3839a. But I guess it is possible that 3839b was included in later production
runs of the set.
|
|
Author: | paulvdb | Posted: | Apr 28, 2023 09:44 | Subject: | Re: help Q re: Paypal payment through invoice? | Viewed: | 31 times | Topic: | Payment Methods | |
|
| In Payment Methods, BrickieSixx writes:
| Hello,
requesting help here, I have a customer who would like to use paypal purchase
options which may not be showing up on the onsite paypal payment.
SO if that customer chooses manual invoice, and then then i invoice through bricklink,
can I make an invoice then through paypal directly and still integrate with Bricklink
for their tax collection or whatever?
Is this a bad idea? I never want to break TOS or circumvent BL.
Thank you very much for any advice.
-Adam
|
Bricklink can only collect tax if the buyer pays with onsite payment.
|
|
Author: | paulvdb | Posted: | Apr 23, 2023 07:54 | Subject: | Inventory Change Request for Set 4002016-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Apr 22, 2023 08:50 | Subject: | Inventory Change Request for Set 4002020-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges and Tow Ball (Undetermined Type) to 6628a Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole}
Comments from Submitter:
Source: set in my personal collection that was never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Apr 20, 2023 11:21 | Subject: | Inventory Change Request for Set 41015-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Medium Azure {90509u Minifigure, Utensil Ski 6L (Undetermined Type) to 18744 Minifigure, Utensil Ski 6L (48mm Long)}
Comments from Submitter:
Source: set in my personal collection that was originally bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Apr 15, 2023 14:23 | Subject: | Inventory Change Request for Set 41058-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
Comments from Submitter:
Source: set in my personal collection that was bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Apr 10, 2023 05:16 | Subject: | Inventory Change Request for Set 41428-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
Comments from Submitter:
Source: set in my personal collection that was originally bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Apr 10, 2023 04:23 | Subject: | Inventory Change Request for Set 41318-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
Comments from Submitter:
Source: set in my personal collection that was originally bought sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Apr 5, 2023 14:21 | Subject: | Re: Inventory Change Request for Set 7344-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Add 2 Part 32532 Yellow Technic, Brick 6 x 8 Open Center (Alternate) (match ID 99)
* Change 17 Part Black 2780 Technic, Pin with Short Friction Ridges {match ID 0 to 99}
* Change 3 Part Yellow 32532 Technic, Brick 6 x 8 Open Center {match ID 1 to 99}
* Change {2 to 19} Part Black 2780 Technic, Pin with Short Friction Ridges (Alternate) {match ID 1 to 99}
* Change 2 Part Yellow 32531 Technic, Brick 4 x 6 Open Center (Alternate) {match ID 1 to 99}
* Change 2 Part Yellow {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 2 Part Yellow {6192 Slope, Curved 2 x 4 Double (Undetermined Type) to 6192a Slope, Curved 2 x 4 Double without Groove}
Comments from Submitter:
Source: sealed set contents. Fixing alternates and match IDs for the redesign and adding correct variants for the undetermined items in this set. A correction leaflet was included showing that the 6x8 technic brick in step 11 is replaced by two 4x6 technic bricks and two pins. The leaflet shows black 4x6 technic bricks, but yellow ones are included in the set. The back of the leaflet shows to add one of the white technic liftarms in step 12 instead of step 16.
Additional note: my set has only one extra technic pin instead of the two that are listed in the extras section of this inventory.
|
Scans of the front and back of the correction leaflet. I'll also submit these
as additional images for the instructions.
|
|
|
Author: | paulvdb | Posted: | Apr 5, 2023 14:20 | Subject: | Inventory Change Request for Set 7344-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 32532 Yellow Technic, Brick 6 x 8 Open Center (Alternate) (match ID 99)
* Change 17 Part Black 2780 Technic, Pin with Short Friction Ridges {match ID 0 to 99}
* Change 3 Part Yellow 32532 Technic, Brick 6 x 8 Open Center {match ID 1 to 99}
* Change {2 to 19} Part Black 2780 Technic, Pin with Short Friction Ridges (Alternate) {match ID 1 to 99}
* Change 2 Part Yellow 32531 Technic, Brick 4 x 6 Open Center (Alternate) {match ID 1 to 99}
* Change 2 Part Yellow {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
* Change 2 Part Yellow {6192 Slope, Curved 2 x 4 Double (Undetermined Type) to 6192a Slope, Curved 2 x 4 Double without Groove}
Comments from Submitter:
Source: sealed set contents. Fixing alternates and match IDs for the redesign and adding correct variants for the undetermined items in this set. A correction leaflet was included showing that the 6x8 technic brick in step 11 is replaced by two 4x6 technic bricks and two pins. The leaflet shows black 4x6 technic bricks, but yellow ones are included in the set. The back of the leaflet shows to add one of the white technic liftarms in step 12 instead of step 16.
Additional note: my set has only one extra technic pin instead of the two that are listed in the extras section of this inventory.
|
|
Author: | paulvdb | Posted: | Apr 1, 2023 03:46 | Subject: | Inventory Change Request for Set 10299-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 18 Part White {6192 Slope, Curved 2 x 4 Double (Undetermined Type) to 6192b Slope, Curved 2 x 4 Double with Groove}
Comments from Submitter:
Source: set in my personal collection that was originally bought new sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Mar 29, 2023 00:13 | Subject: | Re: ATTN: BrickLink "Trans-Black" Color Change | Viewed: | 97 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| Dear BrickLink members,
In May of this year, the LEGO Group plans to release a new color, and this has
implications for the BrickLink catalog and marketplace. The new color being introduced
is 375 Transparent Black, and we believe it will eventually replace LEGO color
111 Transparent Brown.
As most of you know, the greater fan community has for many years referred to
LEGO color 111 Transparent Brown as "Trans-Black". Up until now, this
name has served us well because there was no official LEGO color known as Transparent
Black. Now that the LEGO Group is introducing a color officially known as Transparent
Black, it will cause alignment problems to have the same name being used for
two different colors.
We anticipate that the introduction of this color will cause some disruptions
over the short term, but we have created a plan of action to minimize those disruptions.
The first thing we will do is change the name of the current Trans-Black color
to "Trans-Brown (Old Trans-Black)". This change is scheduled to
take place at the beginning of April. This will ensure that the name change will
be very noticeable within the catalog, set inventories, BrickLink stores, order
summaries, etc., so that the majority of BrickLink users can adjust to the change.
Next, the new color will be added to the catalog as "Trans-Black (2023)"
to make it very obvious that this is a new color and should not be used for older
set inventories and older parts being listed for sale. This addition is expected
to happen at the beginning of May when set 75346 is released and inventoried:
https://www.bricklink.com/message.asp?ID=1398124
After a 6-month transition, we will remove the text in parentheses from both
color names. The older color will then be "Trans-Brown", and the
newer color will be "Trans-Black". This will complete the transition.
--------------------------------------------------------------------------------
The question arises, why have we decided to go the route outlined above rather
than leaving "Trans-Black" aligned to LEGO color 111 Transparent Brown
and creating a new color name for the new LEGO color 375 Transparent Black? There
are several reasons.
First, we want to make sure that we do not create long-term confusion between
these colors, since we believe the new LEGO color 375 Transparent Black will
become the standard color and LEGO color 111 Transparent Brown will become just
another part of the history of the brick system we all know and love. As time
goes by, the older color will not be seen as often and the newer color will be
everywhere. And after what we hope is a relatively short period of time, BrickLink
users will adjust naturally to the change.
Second, coming up with a name for a new color is not an easy task. Although it
looks darker than the current LEGO color 111 Transparent Brown, it doesn't
look much different from what most people would say is some type of "transparent
blackish gray" color. Typically, new color names grow longer over time to
help distinguish from existing colors, so we could end up with something like
"Trans-Very Dark Bluish Gray".
Longer names are something we have come to accept in a catalog that covers the
entire history of LEGO colors, but it helps lower the entry barrier to BrickLink
when we can use simpler names at least for the most common colors. Using the
relatively short names "Trans-Brown" and "Trans-Black" are ideal
instead of retaining "Trans-Black" for the earlier color and creating
a longer name for the new color.
Finally, aligning the names of the two colors with the official LEGO color names
helps us future-proof the BrickLink catalog. By aligning these color names now,
we make sure that any other colors the LEGO Group may introduce within this range
in the future would not cause any further issues.
Thank you for your patience as we make this transition.
The BrickLink Catalog Administrative Team
|
Are there also going to be changes to other colors where Bricklink and Lego use
the same name for different colors like dark green?
|
|
Author: | paulvdb | Posted: | Mar 21, 2023 10:35 | Subject: | Re: phantom shipping option | Viewed: | 31 times | Topic: | Technical Issues | |
|
| In Technical Issues, pashah writes:
| We've received two orders with "Request for invoice (backup method)"
as the shipping method on the invoice page. We do not have a shipping method
with this name (we may have some time back) and one of these orders is below
our minimum for international shipping (the order total is less than $1). We
can't find this shipping option on the store settings page or on our store
page so this appears to be a "phantom" shipping option. We have international
invoice-only shipping options but this is not one of them. Has anyone encountered
this issue and is there a way to address it?
|
On the store management page https://www.bricklink.com/v2/mystore/management.page
there is the option Backup for Instant Checkout - Use invoice when an order can
not be placed with Instant Checkout.
|
|
Author: | paulvdb | Posted: | Mar 20, 2023 01:19 | Subject: | Re: Counterpart not removed when reverse part out | Viewed: | 22 times | Topic: | Inventories | |
|
| In Inventories, Ziegelmeister writes:
| In Inventories, jennnifer writes:
| Counterparts are not included in the part out system. Exactly what items are
you referring to?
|
Iiiiinteresting.
The original upload was through the most recent version of BrickStore. The parts
I'm referring to are
* | | 38339c01 (Inv) Train Wheel RC, Holder with Pin Slots with 2 Black Train Wheel RC Train with Pins (38339 / 38340) Parts: Wheel {Black} | , and
When I went to back out the pieces I used the part out page here on Bricklink
because I can't enter a negative number in Brickstore.
|
When importing a set inventory in Brickstore there is a checkbox for including
counterparts. If you are using it to part out sets you should make sure that
that box is unchecked. Unless of course you want to have those counterparts listed
in your store. But in that case you should make sure to manually remove the individual
parts that make up those counterparts.
|
|
Author: | paulvdb | Posted: | Mar 19, 2023 08:22 | Subject: | Re: Forward bricklink messages to email? | Viewed: | 41 times | Topic: | Help | |
|
| In Help, Nordell102 writes:
| Hi!
I’m not a frequent buyer here, so I don’t see when I get a message on this site.
Is there any way to automatically notify me by sending a copy or an alert to
my private email?
Please, help me!
|
https://www.bricklink.com/pref_contact.asp on that page you can set how to receive
Bricklink messages and invoices.
|
|
Author: | paulvdb | Posted: | Mar 19, 2023 03:35 | Subject: | Re: Please consider a merge | Viewed: | 44 times | Topic: | Catalog Requests | |
|
| In Catalog Requests, JulieK writes:
| Hi,
Can these 2 parts be merged? If not, can a note be added that explains the difference?
End of a long day of sorting, maybe I'm just glazing over the difference?
[p=FTGpb308c01]
Thanks!
Julie
|
They look the same to me and Brickset lists the same torso in all three sets
that these came in: https://brickset.com/sets/containing-part-6349575
|
|
Author: | paulvdb | Posted: | Mar 10, 2023 03:30 | Subject: | Re: The most boring instructions cover ever? | Viewed: | 46 times | Topic: | New Sets | |
|
| In New Sets, randyf writes:
| In New Sets, fracksfreakshow writes:
| Is this the most boring instructions cover ever? Was Lego trying to save a penny
by making this so boring with no color? Did the guy that was supposed to do
the cover art take the day off and Lego refused to wait? I'm going to return
the set and tell the employee it's because how boring the instruction cover
is!
|
I can one up you:
Have a look through the instruction manuals for sets released this year:
https://www.bricklink.com/catalogListOld.asp?q=&catType=I&catID=&itemYear=2023
This is the new style for all instruction books. I think they look absolutely
awful now.
|
And they don't even put the set number on the instructions for 18+ sets.
I find that very annoying.
|
|
Author: | paulvdb | Posted: | Mar 3, 2023 08:00 | Subject: | Inventory Change Request for Minifigure oct022 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue {973pb0106c01 Torso Octan Logo and 'OIL' Pattern (Undetermined Type) / Blue Arms / Yellow Hands to 973pb4275c01 Torso Octan Logo and Italic Font 'OIL' Pattern / Blue Arms / Yellow Hands}
Comments from Submitter:
As shown on the minifigure image and confirmed from my sealed set 1760.
|
|
Author: | paulvdb | Posted: | Mar 3, 2023 07:35 | Subject: | Inventory Change Request for Set 1761-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3937c09 White Hinge Brick 1 x 2 with Light Gray Top Plate (3937 / 3938) (Counterpart)
|
|
Author: | paulvdb | Posted: | Feb 28, 2023 01:41 | Subject: | Re: Inventory Change Request for Set 6394-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, elias3 writes:
| In Inventories Requests, schumacherju writes:
| Please make changes to the following inventory:
* Add 2 Part 4624c02 Light Gray Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641)
Comments from Submitter:
There are 2 cars with grey wheel so 2*4=8
Change action do not work
|
Hello
No...
the Shell truck = 4x light grey
+ the 2 spare = 2x light grey
the 3x small cars = 12x in white
|
Following the instructions, it seems indeed that the Shell truck has light gray
wheels, I can't find any spare ones though, nor can I find a parts list.
All three small cars have white wheels though, so there is definately a maximum
of 1 car with light gray wheels.
|
Based on my own set I can confirm that there are 3 cars with white wheels and
one car with light grey wheels. Together with the two loose light grey wheels
that makes 12 white wheels and 6 light grey. I guess lighting on the box art
photo could make it look like one of the small cars also has light grey wheels,
but they all have white wheels.
|
|
Author: | paulvdb | Posted: | Feb 20, 2023 11:04 | Subject: | Inventory Change Request for Set 10278-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 66897 Light Bluish Gray Plate, Modified 1 x 2 with Wheel Holder, Reinforced Underside (Alternate) (match ID 4)
* Add 2 Part 76959 Light Bluish Gray Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 5)
* Change 1 Part Light Bluish Gray 21445 Plate, Modified 1 x 2 with Wheel Holder {match ID 0 to 4}
* Change 2 Part Light Bluish Gray 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin {match ID 0 to 5}
Comments from Submitter:
Source: sealed set contents
|
|
Author: | paulvdb | Posted: | Feb 13, 2023 13:09 | Subject: | Re: 4032 variant? | Viewed: | 32 times | Topic: | General | |
|
| In General, Classicsmiley writes:
| In the catalog listing for there is this note: "This part has
a variant that cannot be attached to a stud via the underside center hole."
What information do we have about this variant (known colors, sets found in,
etc.)? How easy is it to find them?
Thanks!
-Joel
|
As far as I know they only came in the early 1980s. I have found them in my
|
|
Author: | paulvdb | Posted: | Feb 10, 2023 02:34 | Subject: | Re: Buspakje met track&trace | Viewed: | 50 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, legoboertjes writes:
| Sinds vandaag is in de zakelijke omgeving de nieuwe tarieven alles beschikbaar!
Terug
Vernieuwd international productaanbod nu beschikbaar!
09-02-2023
Het vernieuwde internationale productaanbod is nu beschikbaar in de pakketten
& vracht-module. Je kunt vanaf nu kiezen voor de aanvullende diensten bij internationale
pakketten en het nieuwe product 'Buspakje track & trace' is beschikbaar.
Meer informatie over het aanbod vind je op onze website.
|
Bedankt voor de update. Ik heb de nieuwe verzendmethode buspakje track&trace
toegevoegd in mijn store.
|
|
Author: | paulvdb | Posted: | Feb 6, 2023 23:56 | Subject: | Inventory Change Request for Set 6339-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac122 String, Cord Thin 122cm}
Comments from Submitter:
Source: set in my personal collection that was originally bought new sealed and never mixed with parts from other sets. It is currently built, so I could not measure the exact length. It is somewhere between 120 and 125 cm.
|
|
Author: | paulvdb | Posted: | Feb 5, 2023 15:59 | Subject: | Re: Inventory Change Request for Set 6339-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, Gjk5011 writes:
| Please make changes to the following inventory:
* Delete 1 Part x77a Black String, Cord Thin (Undetermined Length)
* Add 1 Part x77ac100 Black String, Cord Thin 100cm
Comments from Submitter:
Should be replaced by String, Cord Thin 100cm (Item No: x77ac100)
|
Can you please give us the source of this request.
Did you buy / receive this set sealed, does it still have the original parts
and does the string still have it's original length? Do you have any more
info that tells us the string is indeed 100cm?
Thanks,
Diana
|
I just checked my own set that was originally bought new sealed and never mixed
with parts from other sets. The set is built so I could not measure the exact
length of the string, but it seems to be somewhere between 120 and 125 cm. So
that would make it x77ac122.
|
|
Author: | paulvdb | Posted: | Jan 30, 2023 05:32 | Subject: | Re: From which set is this? | Viewed: | 47 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Brickwilbo writes:
| Hello,
I need your swarm wisdom to identify from which set this exhaust is. 🙂
Thank you. 👍
|
If it is Lego it would have to be 4868a with some other part attached to it.
|
|
Author: | paulvdb | Posted: | Jan 27, 2023 13:28 | Subject: | Re: Inventory Change Request for Set 6929-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, arjanve writes:
| Please make changes to the following inventory:
* Delete 1 Part 3839a Black Plate, Modified 1 x 2 with Bar Handles - Round Ends, Mid Attachment (match ID 2)
* Delete 1 Part 3837 Dark Gray Minifigure, Utensil Shovel / Spade (Round Stem End)
* Delete 1 Part 3835 Light Gray Minifigure, Utensil Axe
Comments from Submitter:
not needed and checked with manual
|
They are not shown in the instructions but were included in the set and are shown
in box images.
|
|
Author: | paulvdb | Posted: | Jan 27, 2023 10:46 | Subject: | Re: Buspakje met track&trace | Viewed: | 51 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, wpbremer writes:
| Goedenavond,
Is er iemand die van PostNL heeft vernomen owanneer de mogelijkheid om een buspakje
met track&trace te versturen beschikbaar wordt.
Ze communiceren een hele tijd geleden dat de tarieven en mogelijkheden aangepast
worden, maar ze krijgen het niet voor elkaar om op 1 januari de nieuwe verzendmethode
beschikbaar te maken.
Ik heb in de laatste week van december gevraagd of de verzendmethode hetzelfde
bleef aangezien mijn etiketten toen al Registered aangaven i.p.v. No Tracking.
Hierop kreeg ik te horen dat allen de Registered mogelijkheid beschikbaar zou
worden.
Nu een dikke week verder heb ik weer etiketten met No Tracking en heb ik de klanten
de veel hogere verzendkosten voor Registered berekend en kan ik alles teruggaan
storten.
Alvast bedankt.
|
Ik zag een nieuwe update vandaag bij inloggen op de PostNL zakelijke site:
"De afgelopen weken is er hard gewerkt aan het beschikbaar maken van het
internationale productaanbod. Helaas is een probleem met het printen van labels
nog niet opgelost. We willen er zeker van zijn dat alles goed werkt wanneer je
kiest voor de nieuwe aanvullende diensten. Daarom worden op dit moment alle aanpassingen
getest. Maar dat betekent dat het vernieuwde internationale productaanbod nog
niet beschikbaar in de pakketten & vracht-module. Daardoor kun je op dit moment
nog geen aanvullende diensten kiezen voor internationale pakketten. Ook kun je
nog niet kiezen voor ons nieuwe product Buspakje track & trace.
We begrijpen dat dit vervelend is. In de tussentijd kun je jouw internationale
pakjes en pakketten op de manier voormelden die je gewend bent. We geven je een
seintje als je ons vernieuwde internationale productaanbod kunt gebruiken."
|
|
Author: | paulvdb | Posted: | Jan 25, 2023 15:42 | Subject: | Re: Verzenden Canada | Viewed: | 56 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, ErwinNL writes:
| Je mag geen goederen in enveloppen versturen, regel is al een jaar of wat.
|
Als je gewone enveloppen bedoeld is dat waarschijnlijk inderdaad correct. Luchtkussenenveloppen
mogen wel; die zijn specifiek genoemd in het tarievenboekje van PostNL. Voor
buspakje en pakje staat daar vermeld als toegestane verpakking: "beschermende
verpakking, zoals bubbeltjesenvelop of doosje"
|
|
Author: | paulvdb | Posted: | Jan 7, 2023 14:48 | Subject: | Re: Inventory Change Request for Set 40605-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
| In Inventories Requests, PeckhamBear writes:
| Please make changes to the following inventory:
* Add 2 Part 4079 Dark Green Minifigure, Utensil Seat / Chair 2 x 2 (Alternate)
Comments from Submitter:
Unsure whether there are alternative versions and some sets contain 4079 and some sets contain 4079b.
The two sets I have both contain 4079. All in colour ID 80
|
Original inventory has the 4079b confirmed.
Jen
|
Could be different between European and North American sets? Mine has 4079 without
the sprue mark.
|
|
Author: | paulvdb | Posted: | Jan 3, 2023 09:53 | Subject: | Inventory Change Request for Set 10255-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 98138pb182 Medium Nougat Tile, Round 1 x 1 with Donut / Doughnut with Bright Pink Frosting and Dark Azure and Dark Pink Sprinkles Pattern (Alternate) (match ID 13)
* Add 2 Part 98138pb182 Medium Nougat Tile, Round 1 x 1 with Donut / Doughnut with Bright Pink Frosting and Dark Azure and Dark Pink Sprinkles Pattern (Alternate) (match ID 12)
* Change 1 Part Black {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
* Change 2 Part White {4532 Container, Cupboard 2 x 3 x 2 (Undetermined Type) to 4532b Container, Cupboard 2 x 3 x 2 - Hollow Studs}
* Change 2 Part Medium Nougat 98138pb021 Tile, Round 1 x 1 with Donut / Doughnut with Dark Pink Frosting and Sprinkles Pattern {match ID 0 to 12}
Comments from Submitter:
Source: sealed set contents. Mine has 4532b and 98138pb182. Please change the match id for the extra 98138pb021 to 13. The form doesn't allow me to do that.
|
|
Author: | paulvdb | Posted: | Jan 1, 2023 09:17 | Subject: | Re: 9354 DACTA Street scene | Viewed: | 43 times | Topic: | LEGO products | |
|
| In LEGO products, Wooksta writes:
| I've been gathering the bits to build this set but the few available this
don't have as much information as I'd like. Were any instructions ever
released for this set?
|
Mine did not come with instructions. Just the cover card and activity cards that
showed cars that you can build with the contents of the set.
|
|
Author: | paulvdb | Posted: | Dec 29, 2022 01:41 | Subject: | Re: Getting a color added? | Viewed: | 37 times | Topic: | Colors | |
|
| In Colors, Bb_Rebuild writes:
| Was looking to add an item, but color is not listed. I submitted a ticket and
it appears to be rejected. Was this done incorrectly?
Item# 29602pb01 is now in Medium Nougat, available off BAM wall.
|
In addition to the answer that was already given, there are dummie set catalog
entries for PaB and BAM parts. You can submit an inventory change request to
add this to the appropriate dummie set if you want to make this show up as a
known color.
|
|
Author: | paulvdb | Posted: | Dec 26, 2022 00:58 | Subject: | Re: Cows are body parts?? | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, paulvdb writes:
| In Catalog, DeLuca writes:
| Why are the cow elements (Parts 64452pb02 and 64452pb01) listed in "Animal,
Body Part, Decorated", instead of "Animal, Land" as other animal
moulds are?
|
Because they require other parts to become a complete cow. See for example
|
Although it is strange that the same rule is not applied to horses.
|
|
Author: | paulvdb | Posted: | Dec 26, 2022 00:55 | Subject: | Re: Cows are body parts?? | Viewed: | 49 times | Topic: | Catalog | |
|
| In Catalog, DeLuca writes:
| Why are the cow elements (Parts 64452pb02 and 64452pb01) listed in "Animal,
Body Part, Decorated", instead of "Animal, Land" as other animal
moulds are?
|
Because they require other parts to become a complete cow. See for example
|
|
Author: | paulvdb | Posted: | Dec 24, 2022 12:48 | Subject: | Re: Hoe gaan jouw zendingen naar het buitenland? | Viewed: | 53 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, Leftoverbricks writes:
| Ik heb een zakelijk account bij Postnl en kan mijn zendingen naar het buitenland
volgen.
Hier is wat ik wat ik heb van een zending die 12 dagen geleden is gescand door
de post.
Dus nu zwerft mijn pakket naar Ierland al 10 dagen door het Noordzeekanaal /
de Ierse zee of is opgehouden op luchthavens in Ierland?
Geen idee, maar frustrerend is het zeker.
Te meer omdat dit een pakketje was in het kader van Brickset Secret Santa.
Hoe staat het er bij jou bij met pakketjes binnen de EU?
|
Het is mogelijk dat het pakket wel is aangekomen maar dat PostNL de tracking
niet bijwerkt. Dat had ik laatst een keer met een zending naar het VK. Volgens
de tracking van PostNL was die nog onderweg, maar als ik de tracking code invoerde
op de site van Royal Mail kon ik zien dat het al was bezorgd. En dat was niet
de eerste keer dat PostNL de tracking van een buitenlandse zending niet had bijgewerkt.
Ik heb het ook al gemerkt bij enkele zendingen naar de VS.
|
|
Author: | paulvdb | Posted: | Dec 23, 2022 10:00 | Subject: | Inventory Change Request for Set 1974-3 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 1} Part Yellow {4073 Plate, Round 1 x 1 to 4073sprue Plate, Round 1 x 1, 2 on Sprue} (Extra)
Comments from Submitter:
The extra should also be changed to a sprue. See https://www.bricklink.com/messageThread.asp?ID=332239
|
|
Author: | paulvdb | Posted: | Dec 3, 2022 02:03 | Subject: | Inventory Change Request for Set 76218-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 76959 Light Bluish Gray Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 1)
* Change 3 Part Light Bluish Gray 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin {match ID 0 to 1}
Comments from Submitter:
I found the new variant in my set.
|
|
Author: | paulvdb | Posted: | Nov 26, 2022 12:48 | Subject: | Please update note | Viewed: | 55 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
|
Please update note to say that it also comes in set 10303. I got one in bag 14
and one in bag 15.
|
Author: | paulvdb | Posted: | Nov 26, 2022 11:45 | Subject: | Please update note | Viewed: | 40 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
|
Please update note to add that it also comes in set 10303. I found it in the
set that I just bought.
|
Author: | paulvdb | Posted: | Nov 17, 2022 09:30 | Subject: | Re: Reserve your LEGO® account nickname today! | Viewed: | 40 times | Topic: | Administrative | |
|
| In Administrative, jaradtke writes:
| Mine reached the 24-hour mark too but was finally accepted sometime overnight.
So, there's at least hope whatever process that is eventually completes.
In Administrative, calebfishn writes:
| My nickname has been in moderation for over 24 hours.
|
|
Mine was also finally accepted after more than 24 hours in moderation.
|
|
Author: | paulvdb | Posted: | Nov 16, 2022 06:41 | Subject: | Re: Reserve your LEGO® account nickname today! | Viewed: | 87 times | Topic: | Administrative | |
|
| In Administrative, paulvdb writes:
| In Administrative, paulvdb writes:
| In Administrative, LeeGo73 writes:
| Also wondering how my lego.com account got linked to my Bricklink account. Both
are on different emails. Somehow they are already matched in the link provided
by OP.
|
Same name and shipping address on both accounts?
|
Or you're set to automatically login to your Lego account when you visit
their site?
|
That last one seems to be the answer, at least for me. I tried the link from
the email in two different browsers. The one that I normally use for Lego automatically
logged me in to my Lego account. The other one asked me for username and password.
|
|
Author: | paulvdb | Posted: | Nov 16, 2022 06:32 | Subject: | Re: Reserve your LEGO® account nickname today! | Viewed: | 59 times | Topic: | Administrative | |
|
| In Administrative, paulvdb writes:
| In Administrative, LeeGo73 writes:
| Also wondering how my lego.com account got linked to my Bricklink account. Both
are on different emails. Somehow they are already matched in the link provided
by OP.
|
Same name and shipping address on both accounts?
|
Or you're set to automatically login to your Lego account when you visit
their site?
|
|
Author: | paulvdb | Posted: | Nov 16, 2022 06:31 | Subject: | Re: Reserve your LEGO® account nickname today! | Viewed: | 63 times | Topic: | Administrative | |
|
| In Administrative, LeeGo73 writes:
| Also wondering how my lego.com account got linked to my Bricklink account. Both
are on different emails. Somehow they are already matched in the link provided
by OP.
|
Same name and shipping address on both accounts?
|
|
Author: | paulvdb | Posted: | Nov 13, 2022 15:09 | Subject: | Re: IBAN automatische betaling instellen | Viewed: | 49 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, mrJG1981 writes:
| Hoi,
ik probeer voor mijn instant checkout bij de betaaloptie IBAN ook gelijk een
automatische betalingsmogelijkheid in te stellen en dan ook gelijk de checkout
zeg maar. Alleen de automatische doorkoppeling voor een IBAN in te stellen lukt
me niet en ik kom er ook weinig info over tegen. Waarschijnlijk moet ik daar
een online betalingsplatform voor tussenschakelen (?) alleen ik ben een leek
op dit gebied.
Kan iemand mij uit de brand helpen hoe ik dit voor elkaar ga krijgen?
En zo ja welke betalingsprovider/services is voor Nederland een geschikte?
Mijn dank is groot.
Groetjes Jeroen.
|
Je kunt voor IBAN geen automatische betaling instellen maar alleen een automatische
invoice. De koper zal dan bij het plaatsen van de order direct de invoice ontvangen
maar moet wel zelf handmatig overmaken naar jouw rekening.
|
|
Author: | paulvdb | Posted: | Nov 11, 2022 09:37 | Subject: | Re: This Item is similar to BUT... | Viewed: | 32 times | Topic: | Catalog | |
|
| In Catalog, SylvainLS writes:
| In Catalog, peregrinator writes:
| In Catalog, SylvainLS writes:
| In Catalog, enig writes:
| […]
At the time this rule was written there were no examples like the one we are
looking at right now. There were no re-releases of sets that are 40 years old.
|
15 years for
|
Also nearly identical part count
|
Yes, and build too. But it’s still a re-release, not a box difference or North
America / Europe difference.
The question is where do you put the limit?
I mean, there’s (not exhaustive list):
— different production runs = one catalogue entry,
— different numbers but exact same inventory (North America vs Europe) = two
entries with the link,
— different numbers, slightly different inventories (493-1, 493-3) = two entries,
link,
— different numbers and slightly updated inventory (10000 & 6067) = two entries,
link,
— different numbers, updated build (40370 & 7810) = two entries, link or no link?
If you don’t consider the stand/base for 40370, it’s just old parts that don’t
exist any more that have been replaced with modern parts. And that fits the
link’s definition and usage.
|
Would these two be considered similar sets for the purpose of this relationship
category?
Or these two that are basically the same set in different colors?
|
|
Author: | paulvdb | Posted: | Nov 10, 2022 00:09 | Subject: | Re: Id for parts AGAIN | Viewed: | 32 times | Topic: | Searching | |
|
| In Searching, Fuzeebear writes:
| Yet another part I cant figure out. How do you guys do it so fast?
Bottom 2 for the 4 pc pic
|
They are the two parts that make up
|
|
Author: | paulvdb | Posted: | Nov 6, 2022 04:45 | Subject: | Inventory Change Request for Set 6679-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2447 Black Minifigure, Visor Standard (Extra)
* Add 1 Part 4592c02 Black Antenna Small Base with Black Lever (4592 / 4593) (Extra)
* Add 1 Part 4073 Black Plate, Round 1 x 1 (Extra)
* Change 1 Part Black {2412b Tile, Modified 1 x 2 Grille with Bottom Groove / Lip to 2412a Tile, Modified 1 x 2 Grille without Bottom Groove / Lip}
* Change 2 Part Red {4085 Plate, Modified 1 x 1 with Clip Vertical (Undetermined Type) to 4085c Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)}
Comments from Submitter:
Source: sealed set. The black 2412b may have been included as an alternate but the current source of the inventory is unknown so it would require evidence to get it added back to this inventory. My set had 2412a in black but I did get 2412b in light gray in my set so that variant is correct in the inventory.
|
|
Author: | paulvdb | Posted: | Nov 6, 2022 04:33 | Subject: | Inventory Change Request for Set 6596-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4592c03 Black Antenna Small Base with Light Gray Lever (4592 / 4593) (Extra)
* Add 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard (Extra)
* Add 1 Part 3070b Trans-Yellow Tile 1 x 1 with Groove (Extra)
Comments from Submitter:
source: sealed set.
|
|
Author: | paulvdb | Posted: | Nov 6, 2022 04:30 | Subject: | Inventory Change Request for Set 6556-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4592c03 Blue Antenna Small Base with Light Gray Lever (4592 / 4593) (Extra)
Comments from Submitter:
source: sealed set.
|
|
Author: | paulvdb | Posted: | Nov 6, 2022 04:28 | Subject: | Inventory Change Request for Set 6555-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Light Gray Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Green Plate, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Neon Green Plate, Round 1 x 1 (Extra)
* Add 1 Part 4592c03 Blue Antenna Small Base with Light Gray Lever (4592 / 4593) (Extra)
Comments from Submitter:
source: sealed set.
|
|
Author: | paulvdb | Posted: | Nov 6, 2022 04:16 | Subject: | Inventory Change Request for Set 21058-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 85861 Dark Tan Plate, Round 1 x 1 with Open Stud (Extra)
Comments from Submitter:
Source: sealed set. My set also had one less of these two extras than currently listed in the inventory: tan 3070b and bright green 24866.
|
|
Author: | paulvdb | Posted: | Nov 3, 2022 16:31 | Subject: | Re: Where is the 5X5 quarter dome piece from? | Viewed: | 30 times | Topic: | Catalog | |
|
| In Catalog, Turez writes:
| In Catalog, crazylegoman writes:
| This 5X5 quarter dome part was added to the catalog in June.
It still does not show that it's in any inventoried sets.
|
This has been fixed. Actually I have been planning to add this "set" for quite
some time.
|
Tan and white 8x16 tiles need to be added to that pending inventory.
|
|
Author: | paulvdb | Posted: | Oct 29, 2022 14:06 | Subject: | Re: 8460 what is this ”thing”? | Viewed: | 32 times | Topic: | LEGO products | |
|
| In LEGO products, mk777 writes:
| Hi,
I bought and completed 8460. It was missing every part of the ”thing” on instructions
page 16: the yellow/black technics bricks that build the wide skeleton thing
on top (7 parts).
What is it (there are two of them)? It doesn’t seem to become used.
|
It is temporarily used to keep the steering in place while you build the next
step. It is then removed and the parts are used elsewhere in the build.
|
|
Author: | paulvdb | Posted: | Oct 29, 2022 11:04 | Subject: | Inventory Change Request for Set 21058-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 76959 Light Bluish Gray Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin {match ID 0 to 1}
Comments from Submitter:
Source: found 76959 in the sealed set that I just bought.
|
|
Author: | paulvdb | Posted: | Oct 13, 2022 15:02 | Subject: | Re: Tariefsaanpassingen PostNL per 1-1-2023 | Viewed: | 60 times | Topic: | LANG Nederlands | |
|
| In LANG Nederlands, BasKrie writes:
| Iemand de nieuwe (zakelijke) tarieven voor volgend jaar al bekeken?
Uit het wijzigingsoverzicht:
'Brievenbuspakje+ de tarieven stijgen met gemiddeld 1,1%'
Dat zal, maar volgens mij hebben ze ook de lagere gewicht categorieën samengevoegd
naar 0-100, waarmee 0-30 en 50-100 weg zijn.
En zo wordt een buspakje naar (bijvoorbeeld) Belgie van 25 gram geen 1.55, maar
3.35, das 'iets' meer dan 1.1%
En zelfs als je 0-100 bekijkt gaat het van 3.15 naar 3.35 een ruime 6% meer.
Nu is dit maar 1 voorbeeld, geen idee of de 1.1 wel gehaald kan worden, volgens
mij in elk geval niet door de opheffing van 0-30 en 30-50
Ergens hoop ik dat ik hier straks kan lezen dat ik me vergis en de lagere gewichten
er gewoon nog zijn in 2023.
|
Ik zie inderdaad dat de drie laagste gewichtsklassen zijn samengevoegd tot 0-100
gram. Buspakje met track&trace is wel nieuw voor zakelijk klanten. Kost €1 extra
binnen Europa en €2 extra buiten Europa. En ook pakje verzekerd is volgens mij
een nieuw product.
|
|
Author: | paulvdb | Posted: | Oct 10, 2022 09:12 | Subject: | Re: Is this normal for Lego part? | Viewed: | 51 times | Topic: | Help | |
|
| In Help, Bricksgram writes:
| I found 3624 Headgear Hat, Police in Black color and I noticed number 69 on the
inside. Just want to ask is that was normal for Lego, or in other words is it
original Lego part?
|
I checked a few of my own from the 1980s. They all had numbers in them in what
appears to be the same font. So this was normal for these older hats.
|
|
Author: | paulvdb | Posted: | Sep 9, 2022 16:12 | Subject: | Re: First LEGO set you got | Viewed: | 33 times | Topic: | Off Topic | |
|
| In Off Topic, LEGOfan1138 writes:
| So I’m curious to know what y’all’s first set was. I’ll go first: mine was 9496
Desert Skiff. I remember getting it from a close friend back in the day. Still
own my Luke Skywalker and Boba Fett from that set. Sadly the rest has went to
the bin which I sold a few years ago. ( I remember having a 2014 Grand Inquisitor
in there too! 😕
|
Not sure if it was actually the first set I got, but it is one of the sets I
remember most from my early childhood:
|
Author: | paulvdb | Posted: | Sep 1, 2022 00:20 | Subject: | Re: Can't find these wands? Are they lego? | Viewed: | 28 times | Topic: | Help | |
|
| In Help, Biglesdug writes:
|
|
Author: | paulvdb | Posted: | Aug 29, 2022 15:23 | Subject: | Re: Part 65081 | Viewed: | 27 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, normann1974 writes:
| I have bought part 65081 in Red (PCC 6282131) from LEGO's pick-a-brick service.
But BrickLink doesn't recognize either number. Does anyone recognize this
part? Judging by its name it's most likely a part used in an assembly.
B CONNECTOR INSERT, NO. 1
Color: Bright Red
Category: Vehicles & Transportation
Sub category: Cranes & Scaffold
/Jan
|
Searching for the term b connector on Brickset gives several Duplo parts. On
Bricklink this connector appears to be called locking ring. Searching for Duplo
locking ring on Bricklink will show you those parts.
|
|
Author: | paulvdb | Posted: | Jul 31, 2022 16:47 | Subject: | Re: Can you help me identify this part please ? | Viewed: | 30 times | Topic: | Help | |
|
| In Help, SylvainLS writes:
| In Help, paulvdb writes:
| […]
| That's not a 1X1 round brick though. The red part is a minifig megaphone.
David
|
Is it? Looks to me like a 3062b attached to 4081b
[P=3062b,5]
|
If you look just above, there’s a real 1x1 round brick in LBG and it’s a bit
thicker and shorter.
|
You're right. And even if it was attached to a 1x1 round brick, there is
no way the front of the spear gun could stick out that far from it if the bottom
of the round brick has to be attached to something else.
|
|
Author: | paulvdb | Posted: | Jul 31, 2022 16:39 | Subject: | Re: Can you help me identify this part please ? | Viewed: | 23 times | Topic: | Help | |
|
| In Help, crazylegoman writes:
| In Help, Stellar writes:
| In Help, utlf writes:
Not necessarily, the round brick 1 x 1 can be inserted from the front and the
end be there still as an attachment point.
|
That's not a 1X1 round brick though. The red part is a minifig megaphone.
David
|
Is it? Looks to me like a 3062b attached to 4081b
[P=3062b,5]
|
|
Author: | paulvdb | Posted: | Jul 30, 2022 07:23 | Subject: | Re: Inventory Change Request for Set 375-2 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Lord_Barthon writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, Lord_Barthon writes:
| Please make changes to the following inventory:
* Add 2 Part 3840pb04 Light Gray Minifigure Vest with Shield with White Maltese Cross on Red Background Pattern (Stickers) - Sets 375-2 / 6075-2 (Counterpart)
* Add 2 Part 3840pb05 Light Gray Minifigure Vest with Shield with Yellow and Green Stripes Pattern (Stickers) - Sets 375-2 / 6075-2 (Counterpart)
* Add 8 Part 3840pb02 Light Gray Minifigure Vest with Crown on Purple Background Pattern (Stickers) - Sets 375 / 6075 (Counterpart)
* Add 2 Part 3840pb06 Light Gray Minifigure Vest with 8 Yellow Trefoils on Blue Background Pattern (Stickers) - Sets 375 / 6075 (Counterpart)
Comments from Submitter:
Those parts were quite obviously missing from the counterpart section. As the set 375 and 6075 are two of the most iconic lego castles... this should probably be corrected.
I didn't figure out the possible Inv Item ID
|
These are already in the inventory as counterpart, since they are in the inventory
of the (counterpart) minifigures.
https://www.bricklink.com/catalogItemIn.asp?P=3840pb06&colorID=9&in=A
Diana
|
Hi Diana,
Thank you for the quick reply.Then I don't really understand why they don't
show as counterparts in the set? Even if I use "Break minifigure" they won't
appear? Do I get something wrong?
Best wishes
Barthon
|
Looks like that option only breaks minifigures that are in the regular section
and not minifigures that are in the counterpart section of the inventory.
|
|
Author: | paulvdb | Posted: | Jul 30, 2022 05:24 | Subject: | Re: instructions | Viewed: | 28 times | Topic: | Help | |
|
| In Help, Legopenguinoo writes:
| my tablet doesnt support the lego instruction app and im not going to buy an
expensive phone just to build this set is there any other way to get the instructions?
|
Others have already posted links for instructions for regular Lego sets. If you
are looking for pdf files of the Bricklink Designer Program instructions, you
can find them at https://www.bricklink.com/v3/designer-program/instructions.page?utm_content=subnav
|
|
Author: | paulvdb | Posted: | Jul 25, 2022 05:42 | Subject: | Re: Adding weight to catalog | Viewed: | 24 times | Topic: | Catalog | |
|
| In Catalog, Dixi78 writes:
| I have a question about adding weight to the catalog.
I have a set of which the weight isn't supplied (set 1361).
At 'add or change item' the weight for set, instructions and box can
be specified separately. Is the weight of the set including instructions
and box (so, the complete set) or only the parts?
If the set is sealed, it is difficult to split this apart (not the case with
me)...
Thanks for the help!
|
Set weight is the total weight of the set including parts, box and instructions.
So if you have a sealed set you can just weigh it and submit that weight.
|
|
Author: | paulvdb | Posted: | Jul 20, 2022 23:28 | Subject: | Re: Inventory Change Request for Set 60036-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SylvainLS writes:
| In Inventories Requests, gunga writes:
| Please make changes to the following inventory:
* Add 1 Part 15210pb122 Black Road Sign 2 x 2 Square with Open O Clip with Rock Crystal 5 Point on Screen Pattern (Sticker) - Set 60036 (Alternate) (match ID 6)
* Add 1 Part 15210pb123 Black Road Sign 2 x 2 Square with Open O Clip with Medium Blue Helicopter on Radar Screen and 6 Buttons Pattern (Sticker) - Set 60036 (Alternate) (match ID 7)
Comments from Submitter:
15210 is listed in the official inventory. The older versions, 30258pb036 and pb037, are listed in the counterpart section. I do not know if both versions of the road sign were in this set or if the 30258 sticker parts were mistakenly added as it's not listed in the inventory or as a counterpart. If both versions exist, then would they be listed as alternate counterparts?
|
Just checked mine (bought in 2014): 15210*.
It seems I actually haven’t any 30258* even though I have BL orders with some…
*sigh* I need to change my inventory….
When was the split done in the catalogue?
|
15210 was added to the catalog in August 2015.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|