Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | psusaxman2000 | Posted: | Apr 21, 2023 22:54 | Subject: | "Problems" with 21303 set inventory | Viewed: | 93 times | Topic: | Inventories | Status: | Open | |
|
| So I recently picked up what I thought was all the parts for the 21303 Wall-e
set
I was not aware that there was an issue with the neck build and a supplemental
pack available. However when I started to build the set, I found that I didn't
have all the pieces and that's when I realize that there was a reissue for
the neck build and a large set of "alternate" parts in the BL inventory.
All the instructions online, through the Lego instructions page and on rebrickable
are for the updated neck. I know the inventory is based on the parts in box,
but there should be a note or something else that calls out that the inventory
does not allow for the build to be completed based on all the available insturctions.
That being said, if someone can find an online version of the original instructions,
that would be great.
|
|
Author: | BU_EK | Posted: | Mar 31, 2023 13:34 | Subject: | Inventory for 7239-1 Extra parts | Viewed: | 48 times | Topic: | Inventories | Status: | Open | |
|
| The inventory for 7239-1 includes a spare vehicle base 52037. I'm just checking
the parts list for my set to ensure it's complete and I'm finding it
difficult to believe the set would include such a large extra part. Is the inventory
correct. Thanks
|
Author: | Biglesdug | Posted: | Mar 30, 2023 16:03 | Subject: | Correct the inventory for minifigure gen136 | Viewed: | 81 times | Topic: | Inventories | Status: | Open | |
|
| I couldn't't figure out how to change it in the catalog, but the inventory
for gen136 is incorrect. The torso for the figure has back printing, it's
not just the basic torso 973pb3169c01.
|
Author: | pcthurman | Posted: | Mar 28, 2023 16:00 | Subject: | 910001 Castle in the Forest | Viewed: | 110 times | Topic: | Inventories | Status: | Open | |
|
| Have the stickered pieces for been added to the catalogue yet?
Cass T
|
|
Author: | prestonswann | Posted: | Mar 26, 2023 18:14 | Subject: | Parting out/existing inventory/my remarks | Viewed: | 61 times | Topic: | Inventories | Status: | Open | |
|
| Apologies if this is explained elsewhere, but I could not find the answer.
Currently, I am using the "My Remarks" field to indicate my inventory
location i.e. B01D01.
When I begin to part out a kit, on step 2 where it lists the parts, if I have
that part already in inventory, there is a link to "view store inventory
detail". I can click this to see the existing "my remarks" to see
where that piece is currently stored in my inventory, but it would save me a
ton of time to see that right on step 2 of the part-out process. Is this possible?
Thank you!
|
|
Author: | Ziegelmeister | Posted: | Mar 19, 2023 18:51 | Subject: | Counterpart not removed when reverse part out | Viewed: | 61 times | Topic: | Inventories | Status: | Open | |
|
| While looking at my own statistics for the other thread about neutral feedback
I noticed a few parts on my store page that I know for a fact I haven't handled.
Last week I uploaded two that I came by. I had full intention to
part them out but my 6 year old son saw them on the sorting table and his eyes
jumped out of his head. So I decided to let him have one and then hold of on
parting out the other until I can get some more.
So I did the trick that Brickwilbo mentioned about parting out -2 sets.
That appeared to have worked but all of the parts that are still in my store
from that set are listed as counterparts in the set inventory.
I just went and looked at the part out page and I don't see anything about
counterparts. Is this a glitch or am I completely blind?
|
|
Author: | par016 | Posted: | Mar 17, 2023 10:51 | Subject: | Bag of parts in inventory | Viewed: | 94 times | Topic: | Inventories | Status: | Open | |
|
| Can I ask why there is a bag of tiles in this inventory instead of the tiles
being in the inventory individually? Seems odd and inconsistent with other inventories.
Thanks,
Pete
|
|
Author: | pathmer | Posted: | Mar 7, 2023 23:28 | Subject: | Possible set inventory mistake | Viewed: | 121 times | Topic: | Inventories | Status: | Open | |
|
| Hi I'm new, so not sure where to say this or if anyone cares. I noticed a
possible mistake in the inventory for the Black Monarch's Castle (6085-1).
It lists 5 light grey 2x2 as 3003old. but I still own my set from childhood and
it has the 3003 variation with the little support ridges on the inside. Maybe
there were differnet releases, I don't know. So not sure if it should have
both listed, or swapable, or what. Thanks.
|
|
Author: | LEGOGuy123 | Posted: | Mar 5, 2023 16:37 | Subject: | Wrong parts in 21154 | Viewed: | 106 times | Topic: | Inventories | Status: | Open | |
|
| I was taking apart my set when I realized that the 2 transparent heads were listed
as 3626c, but I got 28621. Also, Brickset also listed it as 28621. Did I get
the wrong parts or are these parts listed wrong on Bricklink?
|
Author: | Meneldur | Posted: | Mar 1, 2023 16:03 | Subject: | How to transfer orders to my collection | Viewed: | 67 times | Topic: | Inventories | Status: | Open | |
|
| Is there any way to easily transfer an order to my collection?
I tried to save an XML from order and from wanted list but when I try to import
them in my collection, it tells me XML is not properly formated.
|
|
Author: | Legominator85 | Posted: | Feb 27, 2023 18:03 | Subject: | Create sets from inventory | Viewed: | 53 times | Topic: | Inventories | Status: | Open | |
|
| Hi!
I recently got hold of a couple of boxes of Lego but don't really know what
sets might be hiding in there.
Is there a way to add these parts to my inventory here on bricklink (or other
sites) and have that site identify what sets you can build based on that inventory?
If not, is there a better way to identify sets than scanning for pieces that
look rare and check them up to see how many sets they're in?
Thanks in advance
|
|
Author: | danb987654 | Posted: | Feb 23, 2023 12:33 | Subject: | set 70920 counter parts issue | Viewed: | 38 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
While recently searching Bricklink for part 85941 Trans-Clear Cylinder Half 2
x 4 x 5 with 1 x 2 Cutout with an "EGG-SPLOSIVES" sticker I was not able
to find one.
So searching around, I figured out what the issue is.
B/L Set 70920-1 Egghead Mech Food Fight inventory has 2 85941 Trans-Clear Cylinder
Half 2 x 4 x 5 with 1 x 2 Cutout, but there is no 85941pb0xx listed in the counter
parts.
Looking at brickset.com / 70920-1 / instructions: BI 3004+4, 70920 V29, page
71 step # 88 it shows adding both sticker #3s, and sticker #4 [as shown on B/L
70920stk01 ] to 1 of the 85941’s.
please consider adding a new 95941pb0xx with the stickers [#3,#4] from set 70920,
and update the counter parts in set 70920 inventory to reflect the new part#.
Thank You,
Danb987654
|
|
Author: | rainbowmist | Posted: | Feb 18, 2023 19:50 | Subject: | Set 6359-1 Horse Trailer Stickers.... | Viewed: | 46 times | Topic: | Inventories | Status: | Open | |
|
| Hi. I was wondering why for set 6359-1 on the sticker sheet there are 4 of the
same stickers. And there are only 2 panels with stickers on them that I see in
the pictures. What are the other 2 extra stickers for? Can anyone verify they
don't go anywhere else on the set?
|
|
Author: | pcthurman | Posted: | Feb 4, 2023 14:36 | Subject: | 6775 Alpha Team Bomb Squad discrepancies | Viewed: | 62 times | Topic: | Inventories | Status: | Open | |
|
| This set
has a discrepancy for the alternate version. The part is shown with
the match ID 99 but in the alternate section, it has no match.
Does this mean it is not found in the alternate version?
And if so can the piece be shown in the alternate section with quantity 0 and
a note saying this piece is omitted in the alternate version please?
Secondly, the instruction entry should also show 2 versions of this set. If I
wanted to buy instructions for this set, currently I would have no way of knowing
which version of the instructions I would get other than reaching out to the
store.
I feel that sets with 2 or more versions should have a requirement for stores
to state which version of the instructions they are selling to make it easier
for the buyer.
Thoughts?
Cass T
|
|
Author: | Kelcy | Posted: | Jan 29, 2023 13:57 | Subject: | questioning feathers in set 6054, Forestmen's | Viewed: | 113 times | Topic: | Inventories | Status: | Open | |
|
| I want to sell set 6054, Forestmen's Hideout and I want to state that it
is a complete set.
I see four feathers in the inventory, two yellow feathers and two white feathers,
pieces 4502b and 4502c, one of each color. However, I do not see these feathers
anywhere in the instructions. These are not the yellow and white, 4502a, feathers
that are part of the inventory of the two Forestmen. I also see that those 4
feathers were move to "regular" not extra parts in 2019.
So, my questions are, WHY are these four feathers part of the inventory when
they are not anywhere in the instructions? If I bought this set new, would these
pieces be included? Can I sell this set as complete, without these four feathers?
|
|
Author: | chetzler | Posted: | Jan 18, 2023 11:17 | Subject: | part 92280 vs 44861 in set 77904, Nebulon-B | Viewed: | 60 times | Topic: | Inventories | Status: | Open | |
|
| I've been working on BrickLinking
When I started, I'm absolutely positive that it included 10 of part
in the BrickLink inventory because that is what I added to my wanted
list. But now the inventory shows
Neither part was ever listed as an alternate and I don't see anything in
the log change history. Can anyone shed any light on what is going on? The
instructions available from LEGO (see link below, page 12) pretty clearly show
part 92280, so it feels like that should be the part in the BL inventory. But
I have never had an actual set in-hand so perhaps what was printed does not match
what was shipped.
Again, any additional insight, especially from someone who has the actual set
would be appreciated.
Thanks!
https://www.lego.com/cdn/product-assets/product.bi.core.pdf/6347664.pdf
|
|
Author: | caravancarlos | Posted: | Jan 10, 2023 15:32 | Subject: | Minifigures to sets | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
|
| Hi
I have over 3000 mini figures is there a way to download a list of minifigure
numbers and to what sets they belong to. I know rebrickable does this but not
the same part numbers?
|
Author: | EnergeticStick | Posted: | Jan 5, 2023 11:46 | Subject: | Minifigure inventory verification failing | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
|
| I'm inventorying minifigure sw1219 (Cad Bane) and when I go to Verify Items,
his hat (item no. 2010) is verified as Beginner Math Skill Books 1 & 2 (item
no. is also 2010) despite the PCC and color info I input being accurate to the
hat, so I really can't see anything I can do about it. Please help!
|
Author: | PeckhamBear | Posted: | Dec 28, 2022 17:58 | Subject: | Adding Printed Parts Not on BL Catalogue | Viewed: | 61 times | Topic: | Inventories | Status: | Open | |
|
| Doing my first ever inventory for set 80110.
There's a few printed parts that don't show up on Bricklink yet, and
so I can't seem to add them to the inventory.
Do I need to add them to the catalogue, and if so, how do I go about doing that?
Cheers
Dan
|
Author: | jezurka | Posted: | Dec 16, 2022 08:49 | Subject: | dis081 from set 40521 | Viewed: | 67 times | Topic: | Inventories | Status: | Open | |
|
| Hello
Can you please part out this minifigure?
Thanks
|
Author: | fantechnic | Posted: | Dec 5, 2022 01:39 | Subject: | Inventory for Set 40563 stuck ? | Viewed: | 72 times | Topic: | Inventories | Status: | Open | |
|
| Hiya guys, set 40563 (Lego House home of the brick) has been stuck on 'Awaiting
approval' for over a week now (maybe 2 ?)
Is there a prob / missing items etc ?
Dont mean to hassle, but I have 6 of them now and don't know if im better
to sell them as a set or just part it out.
Appreciate all the effort, if someone could have a look at this is would be super.
|
|
Author: | xdennisma | Posted: | Oct 30, 2022 01:12 | Subject: | Set 4489-1 - does packaging include a brick? | Viewed: | 117 times | Topic: | Inventories | Status: | Open | |
|
| I purchased a sealed set 4489-1 (AT-AT - Mini) outside of BrickLink. There is
nothing to indicate that the plastic packaging has been tampered with, and the
seals look intact. However, I see that the front of the packaging has the hollow
mold of a brick in it, yet the mold is empty.
Does anyone know if that mold is supposed to contain a brick (or other item),
or is it supposed to be empty?
|
|
Author: | Nicolasamico37 | Posted: | Oct 27, 2022 08:20 | Subject: | Same inventory in books different languages | Viewed: | 38 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
Is it possible to copy/past an inventory ?
I would like to add the inventory of the book BMPiratesFR I added here earlier...
This book already exists (already inventoried) in different languages and the
inventory is exactly the same.
BMPirates in English
BMPiratesNL in Dutch
BMPiratesDE in German
If an Inventory administrator see that, this book is also co-branding Dorling
Kindersley
Thank you,
Nicolas
|
|
Author: | rainbowmist | Posted: | Oct 19, 2022 14:46 | Subject: | Inventory Change for set 760-2 | Viewed: | 28 times | Topic: | Inventories | Status: | Open | |
|
| Have a couple of stickered parts for set 760-2 I would like to add. Not in catalog
either..
One is a 1x8 red brick the other is a 1x6 red brick.
Thank you.
|
|
Author: | J_Smith | Posted: | Sep 19, 2022 11:09 | Subject: | Inventory for set 10306 | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
|
| I've noticed that an inventory has not yet been created for set 10306 Atari
2600. I would love to create it, but unfortunately I don't own the set, so
I can't list the extra parts or provide pictures of the printed & stickered
pieces. If there's any other way I can help with the creation of this set's
inventory, please let me know.
|
|
Author: | ciprinius | Posted: | Sep 6, 2022 05:36 | Subject: | New Set 40521 | Viewed: | 81 times | Topic: | Inventories | Status: | Open | |
|
| Did anyone have problem with items in new set 40521? I buyed 30 boxes and open
few and have same problem in every box. There are many missing lots dbg 85984
8x, 3070b 2x, 90540 1x ... and many of white bricks 37762 16x, 99563 4x ... Some
items are doubled: white 15712 i have 72 instead of 32.
I never had problem like this with any new never opened lego set. I dont know
what to do with other boxes. How to sell them this this error?
Thanks
|
|
Author: | Lous.bricks | Posted: | Sep 4, 2022 05:25 | Subject: | Uploading an inventory | Viewed: | 66 times | Topic: | Inventories | Status: | Open | |
|
| Hi people I’m trying to upload my inventory the one I copied from brick owl in
xml format but it’s twice the maximum size how do I make it smaller to fit or
upload a larger inventory please any ideas or suggestions
|
Author: | ToysRcool | Posted: | Aug 31, 2022 08:58 | Subject: | String & cord identification | Viewed: | 62 times | Topic: | Inventories | Status: | Open | |
|
| Was curious to see if anyone had a good way of identifying the string thickness
& different lengths/types? Or are you using substitute string/cord since it always
seems to be gone? And if so whats your thoughts on substitution string on a vintage
set?
|
Author: | peregrinator | Posted: | Aug 29, 2022 17:12 | Subject: | 76912 Fast and Furious - odd part | Viewed: | 70 times | Topic: | Inventories | Status: | Open | |
|
| Anyone else find a
[P=3070b,7]
in theirs?
It doesn't appear to be in the instructions. And normally one wouldn't
expect to find just one of this piece.
|
Author: | Jaynecav | Posted: | Aug 23, 2022 13:49 | Subject: | Minifig parts | Viewed: | 72 times | Topic: | Inventories | Status: | Open | |
|
| What stores inventory large selections of minifigure parts...head, hair, torso,
legs?
|
Author: | Stuart9 | Posted: | Aug 23, 2022 08:21 | Subject: | Changes to 314-2 | Viewed: | 80 times | Topic: | Inventories | Status: | Open | |
|
| Please change 132old light grey from 8 to 4.
Add 132old white x 4.
Please change counterpart 7039c02 from 8 to 4.
Add 7039c05 x 4
|
Author: | Tinge1tange1.dg | Posted: | Aug 21, 2022 09:15 | Subject: | Which inventory is correct for sw0202 | Viewed: | 113 times | Topic: | Inventories | Status: | Open | |
|
| Hi!
Anyone who could help me figure out what is going on with sw0202?
I can't figure out the correct inventory.
When I look at sw0202, the minifig has grey pauldron, grey kama and gray visor,
but when I look at the picures of the set in which sw0202 was included, the minifigure
lacks visor and pauldron, but is now instead equiped with a helmet antenna.
So which setup is the "real" Commnader Fox?
|
|
Author: | natuzzo | Posted: | Aug 20, 2022 11:54 | Subject: | Missing counterpart in set 70639 | Viewed: | 77 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
I am trying to complete NinjaGo set 70639 and I am missing a part composed by
a black slope curved 3X2 (24309) and a specific sticker (see picture attached
from the instructions manual).
There is no way I can search this part in Bricklink as this part is missing in
the "counterparts" of 70639 set inventory.
As I don't have a real picture of this part, I cannot make a formal request
for an inventory change for set 70639.
Is there any alternative solution to add this part to the inventory ?
Otherwise there is no way to buy (or sell) this part on Bricklink, apart from
buying a 24309 part and the full sheet of stickers.
Thanks in advance for your help.
Cheers
|
|
|
Author: | krystensprouse | Posted: | Aug 20, 2022 00:12 | Subject: | "My Cost" Math isn't mathing... HELP?? | Viewed: | 84 times | Topic: | Inventories | Status: | Open | |
|
| So I get the concept of the My Cost thing. I can appreciate that. I take the
amount of money I have spent of whatever I am putting in my inventory, divide
it by the number of parts and boom.. cost. Except when I go to my inventory page,
the cost at the bottom isn't adding up to my cost. I'm sure the system
accounts for multiples of one part.. so what is happening.
Example:
Today I spent $20 on 1100 parts that I entered into my inventory. Rounding up,
that puts me at $.02 per part. But when I go to my inventory, the computer calculated
cost is all kinds of messed up...
|
|
Author: | yellowcake | Posted: | Aug 18, 2022 13:03 | Subject: | trans-black plate color difference | Viewed: | 115 times | Topic: | Inventories | Status: | Open | |
|
| Hi all,
As I was parting out a set I stumbled upon 3 trans-black 1x1 plates. The only
problem is, one of them looks like it got a little too much coloring in its plastic.
As you can see on the first image the third one looks plain black, but when held
against the light it's visible it really is transparant.
https://i.ibb.co/MG0YdBq/20220818-184833.jpg
https://i.ibb.co/M9LF1QV/20220818-185045.jpg
Is there a diffrent color for ultra dark transparant or how schould I list these,
fellow store owners?
|
|
Author: | Pippysblocks | Posted: | Aug 13, 2022 11:30 | Subject: | Figure CTY1138 | Viewed: | 67 times | Topic: | Inventories | Status: | Open | |
|
| Re this fig
Should he not have a fair part instead of a helmet (as in the set image)? Just
sold him on BO and it is listed with hair there, luckily I had another fig I
could rob the hair from.
|
Author: | Harryslego | Posted: | Aug 10, 2022 13:59 | Subject: | Minifigures | Viewed: | 85 times | Topic: | Inventories | Status: | Open | |
|
| When adding an inventory do I need to add the minifigure as well as the minifigure
parts or just the minifigure?
Thanks in advance
|
|
Author: | StreamyBrick | Posted: | Aug 10, 2022 07:12 | Subject: | Automate Set inventory from lego data feed? | Viewed: | 141 times | Topic: | Inventories | Status: | Open | |
|
| Hi, i have (alomost) performed a set partout for 76912 which is not a very big
set. Its has a few new items, some color additions to existing designs and a
new minifig torso/head. Sorting, counting, checking numbers, checking what is
what etc etc
I must say it is a hell of a lot of work !! I must not even think of doing a
really large set... respect for the people doing that !!
SO -- i notice that there is a very LARGE backlog in set partouts on Bricklink
for newer sets! And also the approval process is not very fast it seems. I understand
that it has to be done very carefully.
BUT - I also notice that on BRICKSET i very quickly find a set inventory for
also NEW sets ? How can that be the case ?? It is missing the addl parts etc
but for the rest they seem mostly correct.
SO -- as bricklink is my favorite for selling stuff, and bricklink is OWNED
BY the LEGO group im am still wondering wqhy we cannot automate the process of
creating set inventories based on data coming out of LEGO itself and create set
inventories in Bricklink automatically (surely with correct item numbers etc
- but that can be automated too i guess !! Pretty sure they have all data present
, numbers , counts, addl parts etc etc
just my 2 cts
reg koen
|
|
Author: | gchl77 | Posted: | Aug 9, 2022 11:02 | Subject: | NEW PARTS FOR SALE TODAY | Viewed: | 15 times | Topic: | Inventories | Status: | Open | |
|
| new pieces for sale from today.
shipments everywhere.
store in Spain
|
Author: | Yo_Yo_Flamingo | Posted: | Aug 8, 2022 14:55 | Subject: | Parting out sets with Counterparts | Viewed: | 66 times | Topic: | Inventories | Status: | Open | |
|
| Is there any way in which to part out sets including their counterparts (such
as Groot, Fluffy, etc) as a single assembly, and not have those parts listed
twice (once as the counterpart, once from the main set inventory? Either Brickstore
or Bricklink parting out would be fine.
Thanks!
|
|
Author: | NicksVintage | Posted: | Aug 5, 2022 14:33 | Subject: | 6980 Galaxy Commander - parts 4081a & 4085a | Viewed: | 124 times | Topic: | Inventories | Status: | Open | |
|
| I recently picked up a 6980 with its box and it appears to be all original pieces
in like new condition. The puzzling thing is that it has a mixture of 4081a and
4081b (1x1 plate with thin and thick ring) and a mixture of 4085a and 4085b (1x1
plate with thin open-O gray and thin U clip - white). The set is complete and
doesn't have any evidence of other pieces swapped out. Mold details like
solid pins are correct for this age of a set. It feels like these pieces have
been in the box for decades. This leads me to believe that Lego might have shipped
6980 with both part variations for each of those 1x1 modified plate types. Can
anyone verify this? If that's the case, could we get the 4081b and 4085b
listed as alternates?
Thank you
Nick
|
|
|
Author: | StreamyBrick | Posted: | Aug 5, 2022 02:42 | Subject: | Part Out for new sets missing is that policy? | Viewed: | 85 times | Topic: | Inventories | Status: | Open | |
|
| Hi, i notice that there is seems not (yet) to be a partout for several newer
(2022) sets.
Is that a policy currently for newer sets ? Or is the work to partout and document
a set still to be done (by someone) in that case ?
I guess, as bricklink is owned by lego, that could be done fairly easy / automatically
?
On for example brickset i see the sets beoing partout alreay -- so gues the
work has been done already ..
thanks koen
|
|
|
Author: | PlanetEarthToys | Posted: | Jul 26, 2022 20:45 | Subject: | Used vs Used Parts | Viewed: | 164 times | Topic: | Inventories | Status: | Open | |
|
| seen notations about this subject via another thread.
Moderator stated NOT to use phrasing like " as new" to describe a Used brick
with no flaws.
but bricks with flaws like scratches, dents, etc are allowed to be described
as so.
my suggestion for flawless Used bricks was " Looks Brand New"..
after reviewing the Cnodition aspects for listing bricks, there are only 2 choices,
New or Used, with no 'Condition Grading System mentioned for used bricks..
is there an Official Brinklink way to decribe 'Used' bricks with no flaws
on them?
|
|
Author: | PlanetEarthToys | Posted: | Jul 24, 2022 14:22 | Subject: | winnning internet auctions while people sleep | Viewed: | 180 times | Topic: | Inventories | Status: | Open | |
|
| won this over the weekend for the cost of a full tank of gas in the US
thoughts....
|
|
|
Author: | Nubs_Select | Posted: | Jul 19, 2022 13:37 | Subject: | Is my life a lie?!?!?!?! | Viewed: | 196 times | Topic: | Inventories | Status: | Open | |
|
| I thought we weren't allowed to use images that we didn't take for parts
but I just read this line in the email from bricklink
"Quickly download official LEGO images for elements"
So does that mean I didn't need to take low-quality photos of parts with
official images.
I thought I read somewhere one time I couldn't do that I don't know where
or when I saw that but I never questioned it but if I was actually allowed to
then my life has been a lie even though I haven't submitted many inventories
that would have saved so much time... sometimes the most obvious things just
slip right on by
|
|
Author: | tnbrrobinson | Posted: | Jul 12, 2022 11:40 | Subject: | Entering Inventory Shortcuts | Viewed: | 58 times | Topic: | Inventories | Status: | Open | |
|
| Is there someone who could step me through the process of mass uploading parts
lists to my inventory?
|
|
Author: | WOLKsite | Posted: | Jul 7, 2022 16:44 | Subject: | Kraata in 6620 | Viewed: | 70 times | Topic: | Inventories | Status: | Open | |
|
| As currently listed, this set contains specific numbers of individual stages
of purple Kraata, as well as Kraata with a red head and... unspecified tail color?
However, given that Kraata (and Krana) are randomized based on mold position,
not seperate molds like the Kanohi Masks from 2001, I find it doubtful that ever
copy of this set has this specific arrangement...?
I.e. should it not be 7x purple Kraata1, with alternate 7x purple Kraata2, Kraata3,
etc. like the collectible packs?
Also... Not listing the tail color in the set inventories seems problematic?
The same applies to the Rahkshi, where for instance Vorahk would always have
Pearl Dark Gray head and Light Gray tail, it is listed with Pearl Dark Gray with
an undetermined tail color?...
|
|
Author: | fantechnic | Posted: | Jul 4, 2022 09:30 | Subject: | Holdup with Inventory for 60337 | Viewed: | 80 times | Topic: | Inventories | Status: | Open | |
|
| Hiya guys, any reason for the holdup on the approval for this set ?
Is there anything else that needs to be submitted etc that I can help with ?
Have a bunch of these sets I need to part out.
Thanks
Matt
|
Author: | PlanetEarthToys | Posted: | Jun 30, 2022 12:55 | Subject: | so i bought a random 2 pound lot online... | Viewed: | 213 times | Topic: | Inventories | Status: | Open | |
|
| so i ordered a random $30 "2 pound lot of Lego guys" online last week, this is
what i got today....
thoughts...?
|
|
Author: | danielclark | Posted: | Jun 28, 2022 23:19 | Subject: | modular builds inventory by floor? | Viewed: | 58 times | Topic: | Inventories | Status: | Open | |
|
| Does anyone have a good resource for xml files for the Modular Buildings part
inventory by individual floor?
|
Author: | aarekk | Posted: | Jun 27, 2022 07:54 | Subject: | Inventory for 60335 Train Station - making | Viewed: | 68 times | Topic: | Inventories | Status: | Open | |
|
| I am interested 60335 train station from 2022. Is anybody preparing this part
list? Why does it take so long?
|
Author: | Nubs_Select | Posted: | Jun 25, 2022 21:09 | Subject: | Inventory edit glitch? | Viewed: | 88 times | Topic: | Inventories | Status: | Open | |
|
| I accidentally deleted part
from an inventory i'm adding and every time I try to add it back it keeps
instead adding [G=1126]
and I can't figure out how to add the correct version.
I have included some photos and any help would be appreciated.
|
|
|
Author: | jennnifer | Posted: | Jun 23, 2022 16:41 | Subject: | PSA for inventory submitters | Viewed: | 145 times | Topic: | Inventories | Status: | Open | |
|
| File this one under: You can learn something new every day...
You can quickly and efficiently add Extras to your pending inventory by entering
the quantity in the EXT column on the Edit Inventory page and then hitting Submit
Changes. So, you can add ALL the extras for a set in just a few clicks.
{{{she contemplates the number of inventories she has submitted without realizing
this info}}}
As always, if anyone is interested in learning how to submit new inventories
to BL, just drop me a message. It's easier than you think.
Jen
|
|
|
Author: | yuksel | Posted: | Jun 20, 2022 01:12 | Subject: | Why do some comicon figures have no inventory | Viewed: | 94 times | Topic: | Inventories | Status: | Open | |
|
| some comic con figures have inventory, but there are so many that dont, but they
are of varying value. what is the deal with this?
|
Author: | fantechnic | Posted: | Jun 17, 2022 08:41 | Subject: | Inventory for 76948 | Viewed: | 66 times | Topic: | Inventories | Status: | Open | |
|
| Does any body know why set 76948 'Inventory in Progress' seems to be
stalled ?
Have 12 of these sets Im keen to part while the new Jurassic movie still has
some traction
|
Author: | LEGOfan1138 | Posted: | Jun 9, 2022 15:53 | Subject: | Sw0566 | Viewed: | 132 times | Topic: | Inventories | Status: | Open | |
|
| Does the 2014 Tatooine Luke come with a lightsaber? On the entry for the Visual
Dictionary ( Updated and Expanded), it says it comes with the Luke fig, but if
I recall correctly I’m almost certain that he came with a lightsaber.
|
Author: | sixf00t4 | Posted: | Jun 6, 2022 12:33 | Subject: | Something broke 1x1 tiles with black 4 | Viewed: | 137 times | Topic: | Inventories | Status: | Open | |
|
| I just had a buyer get mad about expecting a 1x1 tiles in yellow, when I don't
have them, I just have the black. It would appear, that over 100 people have
the same 'non existent' color in their inventory. Seems like some batch
inventory update broke these, agreed?
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3070bp04#T=C
|
Author: | PepeBrick | Posted: | May 30, 2022 07:30 | Subject: | Inventory change request for set 60050-1 | Viewed: | 38 times | Topic: | Inventories | Status: | Open | |
|
| Please make changes to the following inventory:
Delete 4x Part 3298, Black, Slope 33 3 x 2
Add 4x Part 30636 Black, Slope 18 4 x 2
|
|
Author: | LeeGo73 | Posted: | May 25, 2022 18:01 | Subject: | Set 2506 | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
|
| I bought a bulk lego lot which contained four sealed bags.
After a small search it turns out these are part of the set 2506
The wheel and tires where not in a sealed bag., but mixed between the bulk lego.
Does someone know if these parts where originally shipped in a sealed bag or
loose in the box? I downloaded the building instructions, and it does not mention
a 5th bag.
If shipped loose, can I still list this set as new/sealed, even if the wheels
and tires where mixed in between the bulk lot and the box/instructions are not
present? There is no visible damage/scratching on the wheels.
I will need to clarify in the description of the set that box/instructions are
not present and the wheel/tires are unused, but not 'mint' because of
being mixed in the bulk lego lot.
|
|
Author: | scud80 | Posted: | May 23, 2022 16:46 | Subject: | Item ID Invalid errors for inventory 75341 | Viewed: | 50 times | Topic: | Inventories | Status: | Open | |
|
| I am having a frustrating experience trying to add the inventory for 75341 Luke
Skywalker’s Landspeeder. I have gotten several "Item ID Invalid" for items that
are in the catalog. I have been able to find workarounds for several, but on
the most recent there are no alternates I can find to enter.
The item is 35044 in Nougat. This is a new color for an existing part. The
image for the new color has been added to the catalog. 35044 is the number on
the part and there are no alternate part numbers appearing in the catalog entry.
These errors are especially frustrating because they are only revealed individually
when you hit "Verify items" and I have no way of knowing how many more I will
have to work through.
|
|
Author: | FigFan.com | Posted: | May 22, 2022 00:48 | Subject: | How do you add a Minifig realtito a set? | Viewed: | 51 times | Topic: | Inventories | Status: | Open | |
|
| I am trying to add a Minifig from a set into the “Item Consists of” where you
would normally see the minifigs in a set - instead of the N/A that is currently
there. I must admit it is very hard to figure out for new people lol any help??
|
Author: | janzenroth | Posted: | May 19, 2022 12:40 | Subject: | Why does set 76399 only have one figure? | Viewed: | 158 times | Topic: | Inventories | Status: | Open | |
|
| Just wondering why only one figure is listed in this set as the pictures seems
to show multiple figures.
Thanks
|
Author: | rbritton31 | Posted: | May 14, 2022 16:22 | Subject: | 42140 | Viewed: | 95 times | Topic: | Inventories | Status: | Open | |
|
| Anybody know when Technic set 42140 is going to get past pending approval on
inventory status??
|
Author: | drskyscraperx4 | Posted: | May 13, 2022 19:26 | Subject: | copper masks? | Viewed: | 118 times | Topic: | Inventories | Status: | Open | |
|
| The bionicle toa mata masks no longer seem to be available to list in the color
copper. I know the copper masks exist (separate from "bionicle gold"), I used
to own some and they're very easy to find on Ebay, but now I can't even
select copper as a color for these parts. What happened?
|
|
Author: | ImperialFleet | Posted: | May 11, 2022 17:58 | Subject: | Inventory Change Request for Set 7591-1 | Viewed: | 40 times | Topic: | Inventories | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3049 Red Slope 45 2 x 1 Double / Inverted (Undetermined Type) (match ID 2)
* Add 2 Part 3049c Red Slope 45 2 x 1 Double / Inverted with Bottom Stud Holder (match ID 1)
* Delete 2 Part 3049c Red Slope 45 2 x 1 Double / Inverted with Bottom Stud Holder (Alternate) (match ID 2)
Comments from Submitter:
Hope this helps.
|
|
Author: | TitAnick | Posted: | May 6, 2022 04:46 | Subject: | Color Mangenta | Viewed: | 117 times | Topic: | Inventories | Status: | Open | |
|
| Hello
Appenrently the magenta color is not well referenced on this item 3961.
I have noticed that many more items are affected by this.
Many thanks
Anick
|
|
Author: | TitAnick | Posted: | May 6, 2022 04:39 | Subject: | Inventorie of one item of the set 3116 | Viewed: | 31 times | Topic: | Inventories | Status: | Open | |
|
| Lego Scala -
I have found this item which is not listed in the
3116 Cool Ice Cream Cafe
Many thanks
Anick
|
|
|
Author: | tmtomh | Posted: | May 2, 2022 21:38 | Subject: | Open vs Closed-stud 3062a/b (1x1 cylinder) | Viewed: | 61 times | Topic: | Inventories | Status: | Open | |
|
| In the process of organizing my childhood sets and comparing with BL(and Rebrickable)
inventories, I've noticed that I have a lot of 1978-1979 Classic Space and
Town sets with the open-stud version of the 3062 1x1 cylinder element - 3062b
- but the BL inventories for these sets list the older, closed-stud version,
3062a.
To be clear, my parts are not mixed up with later sets, replacements, etc: I've
kept my 1970s/early '80s sets intact and isolated from later sets; I have
never purchased this element separately from Lego , BL, or anywhere else; and
the number of each color of this element in my collection precisely matches the
total number BL says I should have given the sets that I own.
The only difference is that for most colors I have more of the open-stud "b"
variant of this element than the BL inventories say I should have. In one case
- trans-blue - all 16 of my pieces are the open-stud variant while BL inventories
say all 16 should be closed-stud. For every other color, BL says I should have
a mix of open and closed-stud versions, and I do have a mix - but for almost
every color my mix is different than BL says it should be - I invariably have
more open-stud versions and fewer closed-stud versions than BL says I should
have.
My guess is that Lego was transitioning from the close-stud to the open-stud
version in 1978 and 1979, and perhaps those of us in the US got more of the open-stud
version in our sets during those years than our friends in Europe did, where
many sets seem to have come out slightly earlier than they did in the U.S. But
in that case I would expect the BL inventories for many of these sets' US
versions to list the open-stud version as an alternate inventory item. But a
spot-check of a couple of sets indicates that's not the case.
Would love to hear others' thoughts and experiences with this. Thanks so
much!
|
|
Author: | randyipp | Posted: | Apr 30, 2022 23:14 | Subject: | Question about set 1258-1 | Viewed: | 61 times | Topic: | Inventories | Status: | Open | |
|
| So I cracked open a few tiny technic sets
And inventory seems good, I did have an extra rubber band in each but the issue
I am having is that it appears that 1258 actually has
see comparison photo, these were sealed boxes, sealed bags. Does it make sense
to change it or add it as an alternate?
|
|
|
Author: | LEGOfan1138 | Posted: | Apr 22, 2022 14:43 | Subject: | Change request for inventory of sw0216s | Viewed: | 61 times | Topic: | Inventories | Status: | Open | |
|
| Dear Bricklink Admin,
Please remove part 4735 Light Bluish Gray Bar 1x3 with clip and stud receptacle
on sw0216s. It is not used anywhere on the figure and therefore should not be
part of the figure’s inventory.
|
|
Author: | Dave_Hoogy | Posted: | Apr 12, 2022 04:49 | Subject: | Add correct minifig to set please. | Viewed: | 61 times | Topic: | Inventories | Status: | Open | |
|
| Hey guys, I recently purchased set 6824 from a Bricklink store purely for the
minifig.
Well the blue spaceman had a sticker on it instead of printed on.
I contacted the seller and told him the minifig isn’t the one that was in the
set on BrickLink.
He informed me that it was his own personal set from when he was a kid and didn’t
know how it could have been swapped but refunded the full order for this error.
Well today I found that there is minifig sp069, which is the one with the sticker
but no one knew which set it came from.
So I can confidently say sp069 came from set 6824, and would ask that this be
fixed in Bricklink.
Thank you
Dave.
|
|
Author: | Tiggy2 | Posted: | Apr 3, 2022 13:57 | Subject: | Can I print out my inventory | Viewed: | 118 times | Topic: | Inventories | Status: | Open | |
|
| Here's the issue.
I closed up shop to move, when I moved parts were moved around or lost. I need
to check my BL inventory against my physical inventory...tedious.
Is there a way to print out my BL inventory so I can check off what I have in
relation to what is listed?
Thanks
|
Author: | Svap | Posted: | Mar 29, 2022 06:30 | Subject: | the difference between parts 6628 and 6628a | Viewed: | 99 times | Topic: | Inventories | Status: | Open | |
|
| What is the difference between parts 6628 and 6628a? |
Author: | WildBricks | Posted: | Mar 28, 2022 15:12 | Subject: | Light-up star wars figs | Viewed: | 86 times | Topic: | Inventories | Status: | Open | |
|
| What color is the 1x1 round plate that is on the back of the lightsabers? Is
it pearl light gray or flat silver?
|
Author: | legomalego | Posted: | Mar 25, 2022 19:34 | Subject: | Set 42063. Sticker #11 any idea? | Viewed: | 71 times | Topic: | Inventories | Status: | Open | |
|
| Inventory only shows 2 part #24116 but counterparts shows 3 stickered.
I'm missing something.... I just don't know what.
Can somebody make me feel dumb and explain.
|
Author: | BunteSteinewelt | Posted: | Mar 16, 2022 04:27 | Subject: | Inventory of 76399-1 | Viewed: | 46 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
just a quick question about the inventory of Set 76399-1.
In the inventory, there is only 1 minifig listed while the other minifigures
are listed as parts. Shouldn't these also be listed as minifigs or is there
any specific reason why they are listed as parts?
Thanks!
|
|
Author: | platinum_lego | Posted: | Mar 14, 2022 05:00 | Subject: | black or dark brown hair for dp009? | Viewed: | 67 times | Topic: | Inventories | Status: | Open | |
|
| Hi all,
The image for
shows what looks like black hair, but the inventory lists the hair piece in dark
brown. Looking at the pictures of the two sets this figure appears in, it looks
like the black hair variant appears in
while a dark brown version appears in
assuming the pictures are correct.
Does anyone have these sets to confirm there are two different hair color variants?
Steve
|
|
Author: | Roxyncz | Posted: | Mar 11, 2022 08:32 | Subject: | Inventory 77943-1 | Viewed: | 43 times | Topic: | Inventories | Status: | Open | |
|
| Done |
Author: | Witch1229 | Posted: | Mar 2, 2022 03:23 | Subject: | Need list | Viewed: | 82 times | Topic: | Inventories | Status: | Open | |
|
| Hi, I'm trying to inventory my legos. Can anyone tell me where I can find
a printable list of all legos?
|
Author: | squad472 | Posted: | Mar 1, 2022 16:07 | Subject: | Imperial Star Destroyer 75252-1 Bag Count | Viewed: | 52 times | Topic: | Inventories | Status: | Open | |
|
| Hello. Can anyone tell me how to get an itemized list of contents for each numbered
bag? I believe it is supposed to have 52 or 54 bags numbered 1-19. I would
like to know how many of each number are supposed to be in the complete kit (e.g.
five #19 bags, two #7 bags, one #3 bag etc...). I tried LEGO CS to no avail.
Many thanks!
|
|
Author: | psusaxman2000 | Posted: | Feb 28, 2022 23:58 | Subject: | Question on Extra Parts for Set 910016 | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
|
| So I'm in the process of doing the inventory for the new
In doing so, I print out an inventory so that I can count the pieces as I'm
building from the bags. I can check off the parts when sorting out the bags
and then confirm extras when I'm done with the instructions for that bag
number. In doing so I've found that there are two pieces that are included
in bag 4 for this set that are never used at all:
and
I though maybe I missed something in the build at first, but when I went back
and looked at all the instruction, I never see them in use at all. I thought
maybe I had an incorrectly packed set but then I then went and looked at the
Rebrickable site and they appear directly as "Extras". These are not typical
"Extra" parts by any means. Can anyone else confirm that they have these parts
as well?
|
|
Author: | bricedue | Posted: | Feb 20, 2022 18:56 | Subject: | Delayed by LEGO? 42130 BMW 1000RR Inventory | Viewed: | 96 times | Topic: | Inventories | Status: | Open | |
|
| Hi, this is a curiosity question only. Wondering if LEGO is delaying the selling
of parts from the BMW motorcycle set, perhaps because it is an exclusive high-profile
brand? Does LEGO have oversight of BL inventories now? Do they sign off on some
new parts and not others?
I was able to purchase the 1000rr unique parts through B&P back on January 11,
yet BL still doesn't list these parts almost two months after release (for
example: 71711, the large disc brake rotor). I know Lego has exclusive sales
rights through March or April, after which other retailers will have access to
the set. Is the delayed inventory related to this second release date? Curious
because full sets are available on BL now. Will the upcoming McLaren F1 technic
set inventory be delayed also?
Or it this simply not enough volunteers to move the work along through the BL
process?
Just curious. Thanks!
|
|
|
Author: | dearlydeparted | Posted: | Feb 19, 2022 14:29 | Subject: | Incorrect inventory set 7259 | Viewed: | 56 times | Topic: | Inventories | Status: | Open | |
|
| Not sure who to report this to - inventorying set 7259 from our collection and
there are two errors on BL inventory.
BL. Shows quantity of 2 white 1x10 technic bricks 2730 - should be 4
Quantity of 4 White Technic, Liftarm Thick 1 x 9 40490 - should be 2
|
Author: | LeeGo73 | Posted: | Feb 18, 2022 16:18 | Subject: | ID part | Viewed: | 122 times | Topic: | Inventories | Status: | Open | |
|
| Can't find this part.
1x1 plate with a stepped stud, bottom of stud is normal diameter/height. On top
another 'stud' with smaller diameter and normal height.
|
|
Author: | Leftoverbricks | Posted: | Feb 16, 2022 09:52 | Subject: | pls change weight of min109 | Viewed: | 45 times | Topic: | Inventories | Status: | Open | |
|
| I previously changed weight of min109 from 0 to 3.45. This should be 3.83 because
I forgot the neck bracket 18986.
|
Author: | Leftoverbricks | Posted: | Feb 15, 2022 11:21 | Subject: | Question about 21180 animals | Viewed: | 75 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
I already successfully submitted 4 animals (as counter parts) for set
but there are two more to go. I submitted mineguardian01a and mineguardian02a
and made a couple of notes/questions.
Please contact me so I can get this job done.
Thanks
|
Author: | Graham. | Posted: | Feb 14, 2022 09:43 | Subject: | 71390 what happened? | Viewed: | 132 times | Topic: | Inventories | Status: | Open | |
|
| inventory was showing as pending for a long while now it shows "N/A"
? Thanks
|
Author: | YoHowie | Posted: | Feb 8, 2022 00:27 | Subject: | Order for part I have never had in inventory | Viewed: | 108 times | Topic: | Inventories | Status: | Open | |
|
| Has anyone else ever received an order for a part that has never been in their
inventory. I went back 4 months in old brickstore inventories and I could not
find where I had a Green Plate, Round 1 x 1 with Flower Edge (4 Knobs / Petals)
33291. But today I received an order for 40. Didn't show a remark for location
either.
|
|
Author: | apollo350 | Posted: | Feb 7, 2022 15:02 | Subject: | adding owned pieces to a wanted list | Viewed: | 39 times | Topic: | Inventories | Status: | Open | |
|
| I have recently inventoried all of the spare pieces I own. How do I add/apply
them to wanted lists that I have on this site without doing it manualy? I had
created the invnetory on rebrickable and then tried to upload here but is just
shows up as a wanted list to purchase for the quantity of parts I have.
Thanks
|
Author: | LeeGo73 | Posted: | Feb 4, 2022 16:52 | Subject: | Trans-red 6126b | Viewed: | 102 times | Topic: | Inventories | Status: | Open | |
|
| Does this part exist in trans-red?
I got one, but it does not have the small flat side in the base ring and no LEGO
logo or other markings visible. Fake?
|
|
Author: | Ziegelmeister | Posted: | Feb 4, 2022 15:53 | Subject: | Color shift or alternates? 71741 | Viewed: | 79 times | Topic: | Inventories | Status: | Open | |
|
| I parting out some 71741’s today and stopped when I saw this.
Two sets. Bags 4 and 24 are loaded with them. Set on the left is more blue,
set on right is more teal. Laptop is in use by wife for a while so I can’t
access brickstore. Is this a know issue? are they considered different colors
or are theee alternates?
|
|
|
|
Author: | mdreier | Posted: | Feb 3, 2022 16:01 | Subject: | Identifying a piece in set 5887 instructions | Viewed: | 132 times | Topic: | Inventories | Status: | Open | |
|
| Hello, I am hoping someone can help me identify a piece in set 5887 (Dino Defense
HQ, circled in the attached page from the instructions' inventory). I've
got a complete set except for these pieces and I'm wondering what I'm
missing. I don't think these pieces are listed in the Bricklink parts list
for this set, and I also can't find where they're used in the building
instructions. Many thanks to anyone who is able to help!
|
|
|
Author: | jgrossman1025 | Posted: | Feb 2, 2022 07:42 | Subject: | Help Buying from own store inventory | Viewed: | 106 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
I was thinking about building a MOC from my own inventory and would like some
help with how to go about that. I have about 70% of the parts needed, what i
would like to do is take those pieces, and make it so no one can buy them from
my store, but they are still in bricklink so i can see what drawer they are in.
How would i go about doing this? Is this what the stockroom feature is for?
Thanks, NG
|
|
Author: | Betteroffburnt | Posted: | Jan 31, 2022 15:57 | Subject: | Transfer one store inventory to another store | Viewed: | 92 times | Topic: | Inventories | Status: | Open | |
|
| Good morning,
I am considering selling my store and will be curious if we are able to transfer
the complete inventory from my store to the other store . This would save alot
of time re adding everything to the inventory list
Thanks
Dylan
|
Author: | Leftoverbricks | Posted: | Jan 31, 2022 11:03 | Subject: | Help needed with inv of 21178-1? | Viewed: | 62 times | Topic: | Inventories | Status: | Open | |
|
| I see that this set
is in pending approval status for quite a while.
Don't know if there are any issues, but I'm glad to help. You can contact
me with a private msg or in the Forum (but I'm not very active here lately).
Martin
|
Author: | aboyer | Posted: | Jan 22, 2022 15:22 | Subject: | Export computer-friendly inventory of a set? | Viewed: | 63 times | Topic: | Inventories | Status: | Open | |
|
| Before I spend any time trying to parse the HTML you get from the printer-friendly
version - is there any way to export the inventory of a set? Just the part number,
description, color, quantity, etc., without the formatting etc.
-Andrew
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|