Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | maggiec | Posted: | Apr 29, 2022 18:23 | Subject: | Re: From years of working with Lego on BrickLink | Viewed: | 70 times | Topic: | General | |
| In General, popsicle writes:
| 16 years already? Ouch! The only thing still moving fast as you age, seems to
be time.
Anyway, in those years I’ve developed what could be termed: category likes. Certain
categories within the catalog I tend to buy from when bored, simply because I
enjoy or appreciate the items. I would call it collecting, but it’s not really
that. I have collections, none Lego related.
No, I spend money on these Lego, rationalizing the expenditure with “I’ll sell
it someday in our normal course of doing business here." I guess the perceived
difference for me, is that simple fact; the intention to sell at some point
Well this morning, after several cups of jo, I started pondering those categories
I’ve come to enjoy, and asked myself why? That is, why do I appreciate them,
say over others?
Are there items of particular categories within the BL catalog, you tend to
enjoy more than others? If so, what are they and why the affinity?
I’d enjoy reading your thoughts on this, and have mischievously omitted a personally
salient bit for now: my categories. I will post them, but I would kinda like
to read some of your thoughts, first
-Thanks
|
I always loved the trees. I remember when LEGO Shop at Home had
on sale for something like $5.99 a bag and I bought a bunch. I also stocked
up on when they had them (at Pick a Brick IIRC). My kids' LEGO
table had these wonderful tree-lined streets, and I also had a ton more that
I thought I would gradually sell, but I never got the chance. Oh well.
Enjoy your LEGO while you have it.
|
|
Author: | maggiec | Posted: | Dec 31, 2021 19:52 | Subject: | Re: Help finding Mega Block mini figures... | Viewed: | 58 times | Topic: | General | |
| In General, Seekerskywarp7 writes:
| So I was going through my remaining childhood legos I'm going to give my
son in a few years. It's a mix of Both Lego and Mega blocks. I'm curious
if theirs a Mega Blocks equivalent to Bricklink? Specifically I'm looking
into getting replacement parts for my Dragons from Megablocks Dragon line from
the early 2000's. Plus theirs a few mini figures from that line I want to
re own for the nostalgia.
|
You could browse this forum:
https://bloksforum.freeforums.net/
They have a marketplace board and you might be able to find info on where to
find what you are looking for there.
Maggie
|
|
Author: | maggiec | Posted: | Aug 11, 2021 21:04 | Subject: | Re: Second Clue for Latest Contest | Viewed: | 49 times | Topic: | Contests | |
| In Contests, jbroman writes:
| Hello contest fans,
There have been a lot of good guesses, but no winner yet.
The first clue was that the four digit number started with a 1.
Here's your second clue:
The sum of the numbers is 14.
Please put your guess over on the original post:
https://www.bricklink.com/message.asp?ID=1296781
Johan
Your contest moderator
|
1157
|
Author: | maggiec | Posted: | Jun 25, 2021 17:26 | Subject: | Re: Happy Birthday, Dan | Viewed: | 38 times | Topic: | Announce | |
| In Announce, Danielsmom writes:
| Happy Birthday, Dan Jezek. Your BrickBay dream has come a long way and are making
people all around the world very happy. Nice going, Level88, you're still
remembered on this, June 25, 2021, your 44th birthday.
All my love,
Your Mom (Eliska)
|
Happy birthday, Dan! We are forever grateful for the way you touched our lives.
Maggie
|
|
Author: | maggiec | Posted: | Jun 22, 2021 12:11 | Subject: | Re: We have a new Inventories Admin! | Viewed: | 75 times | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| Dear BrickLink members,
We are very pleased to announce that we are adding member Maggiec to the Community
Expert Program. She is being appointed as a BrickLink Inventories Administrator
and will be serving alongside current Inventories Admins Paulvdb and Turez.
For most of you, Maggie needs no introduction. She is a long-time member of the
site, and has served as a Catalog Administrator for 14 years. She has worked
with several well-known catalog administrators including Firefly and Therobo,
and also Dan Jezek himself.
https://www.bricklink.com/memberAdmins.asp
Most people will associate Maggie with the "catalog" side of the Catalog, but
she has also been active as a contributor on the "inventories" side over the
years as well. In fact, she logged the very first inventory change requests back
in June 2004:
https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=4535-1&viewDate=Y&viewStatus=1
Maggie has been a stabilizing force during some very critical times for the BrickLink
site. And we are very pleased she is joining us now for this next journey, and
we feel she will be an excellent addition to our Catalog team.
Please join me in welcoming her!
|
Thank you all for the warm welcome! I hope to be able to help Paul and Jonas
out in the wonderful work they're doing. Also, this will be a great excuse
for me to begin to rebuild my LEGO collection.
Maggie
|
|
Author: | maggiec | Posted: | Jun 20, 2021 20:27 | Subject: | Re: BrickLink's legal now!! Happy Anniversary :) | Viewed: | 103 times | Topic: | General | |
| In General, JulieK writes:
| Happy 21st Anniversary to BrickLink (a day late).
Big thanks to everybody who has helped in anyway to keep this site going.
And to the non US readers, I say "legal" because 21 is the legal age for drinking
in the US
As always, raise a glass to Dan
https://www.danjezek.com/
Julie
|
Yes, and cheers to you, Julie, one of the beta testers who helped Dan verify
that the site was good to go!
Maggie
|
|
Author: | maggiec | Posted: | Jun 17, 2021 21:20 | Subject: | Re: Mega Bloks reference site | Viewed: | 68 times | Topic: | Off Topic | |
| In Off Topic, peregrinator writes:
| In Off Topic, LegoSpaceForce writes:
| I have some unopened bags of mega bloks that i got with my lego that i bought.
Is there a reference like this one to id the parts?
|
If you're asking if there is something like BrickLink for Megablox, not as
far as I know. I don't think so.
|
Actually the Bloks Forum may be helpful:
https://bloksforum.freeforums.net/
HTH,
Maggie
|
|
Author: | maggiec | Posted: | Oct 12, 2018 18:49 | Subject: | Re: Brickheadz keyword search | Viewed: | 34 times | Topic: | Catalog | |
| In Searching, mwright5 writes:
| When you type brickheadz in the search box, only 7 sets popup. You can then
click on the hyperlink for brickheadz to see all of the sets listed on BL, but
seems like they should all popup with the keyword search.
The following link is what you see when you put in the keyword "brickheadz"
https://www.bricklink.com/v2/search.page?q=brickheadz#T=S
|
You are correct that this isn't consistent. However, BrickHeadz should
not be in the set names, as the catalog doesn't normally include the theme
name in front of the official set name. Thanks for pointing out the inconsistency.
Maggie
|
|
Author: | maggiec | Posted: | Sep 29, 2018 18:25 | Subject: | Re: Help identifying part. | Viewed: | 36 times | Topic: | Catalog | |
| In Catalog Identification, qwertyboy writes:
| In Catalog Identification, jblock writes:
| In Catalog Identification, TheBrickGuys writes:
| I can not for the life of me figure out what this is or where in the catalog
it exists.
Any ideas?
|
[P=bbw008]
I tell you, for as often as I see questions about what this part it in the forums,
BL should put its picture and identifier on the front page for all to see...
|
There are a few parts that come up with some regularity:
http://www.qwertyboy.org/files/parts.php
Niek.
|
Duly bookmarked.
|
|
Author: | maggiec | Posted: | Aug 1, 2018 16:29 | Subject: | Re: Inventory Change Request for Set 4865-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, zaskar writes:
| Removing undetermined items in inventory
|
Please share a little information about the source you're using to determine
which parts were included.
|
Hi Robert!
I just had a look at my set (bought new) and can verify the requested changes.
(Okay, you can't tell from my sad pic, but those parts are there in those
variations.)
Maggie
|
|
Author: | maggiec | Posted: | Jul 27, 2018 18:00 | Subject: | Re: BrickLink's First Ever Inventory | Viewed: | 75 times | Topic: | Inventories | |
| In Catalog Inventories, StormChaser writes:
| In Catalog Inventories, StormChaser writes:
| So what was the very first BrickLink inventory?
|
The attached photo shows the very first inventory change requests on BrickLink.
|
Wow. I made the very first.
|
Author: | maggiec | Posted: | Jul 25, 2018 21:39 | Subject: | Re: Why 3068bpb2000? | Viewed: | 31 times | Topic: | Catalog | |
| In Catalog, samsam2 writes:
| It was me. I thought I had seen somewhere, that if one didn't know the next
sequence number, to just pick a higher one and then a Catmin could fix it. Now
in retrospect, I suppose I should have added a note to point out this still needed
to be set correctly?
|
Yes. We normally check but sometimes we forget.
|
|
Author: | maggiec | Posted: | Jul 17, 2018 10:09 | Subject: | Re: Inventory Change Request for Set 5858-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, axaday writes:
| I had no idea to be watching for a variant, but the pic I will upload of regular
trans-green is the part that came from my set.
|
Trans-green is how Maggie originally inventoried the set from MISB contents.
Someone came along in 2008 and changed the door colors to trans-bright green.
Considering that the purple/silver box edition of this set also includes trans-green
doors, I have approved your requests and then changed the trans-green to regular.
As to whether the trans-bright green doors should be in the inventory at all:
I rather strongly doubt it, but will leave them there as alternates.
|
Thanks for changing Trans-Green back to the regular color.
Maggie
|
|
Author: | maggiec | Posted: | Jul 5, 2018 16:15 | Subject: | Re: New Stickered Assembly Request | Viewed: | 37 times | Topic: | Catalog | |
| In Catalog, Acorn04 writes:
| Thanks for the instructional help. I processed the add.
|
Nicely done! [P=BA52pb03]
Now if you feel intrepid you can submit an inventory change for
It works off the same Add or Change page, but this time you would make
a request to change the inventory and add the assembly as a counterpart.
Thanks for your contribution to the catalog!
Maggie
|
|
Author: | maggiec | Posted: | Jul 3, 2018 18:48 | Subject: | Re: New Stickered Assembly Request | Viewed: | 35 times | Topic: | Catalog | |
| In Catalog, Acorn04 writes:
| Stickered Assembly 6 x 2 x 3 1/3 with Flowers and Homemaker Figure on TV Screen
Pattern (Sticker) - Set 268 - 1 Bricks 2 x 4, 3 Bricks 2 x 2, 3 Tiles 2 x 2
think part # would be BA52pb03 after BA52pb02
|
Hi Acorn,
You can go to this page:
https://www.bricklink.com/catalogAdd.asp
Select Part under Add Item
and then fill out the fields using [P=BA52pb02]
as a guide (you are correct, it appears it would be the number you gave). Then
on the same page cited above there is a link to adding the image. Holler if
you run into issues. Thanks!
Maggie
|
|
Author: | maggiec | Posted: | Jul 1, 2018 22:16 | Subject: | Re: Image not displayed when item has no colour? | Viewed: | 26 times | Topic: | Catalog | |
| In Catalog, _djm writes:
| In Catalog, Admin_Russell writes:
| In Catalog, _djm writes:
| Arrgghh,
Sorry, this set
David
|
Do a hard refresh and try it now.
|
Thank you. Whatever is was that was done has corrected it without the need for
any refresh.
For my future reference, if I see something like this for another item, was this
a catalog quirk that to be resolved needs some form of manual intervention?
Regards,
David
|
No, you were correct, it needed manual intervention. I copied the image from
the Not Applicable color to the Black color this morning, enabling you to see
it, but didn't have time to deal with the xref moves, inventory considerations
or post about it this morning.
Maggie
|
|
Author: | maggiec | Posted: | Jun 27, 2018 14:22 | Subject: | Re: Catalog Error? Part 47394pb167 | Viewed: | 31 times | Topic: | Catalog | |
| In Catalog, Heartbricker writes:
| I parted out Duplo Set 10810.
The Catalog says that the minifig has tan shirt but on 4 sets i parted he looks
the same with a white shirt- it seems to be a catalog error, who do i contact
to solve?
Thank you.
|
Start by submitting a new figure to the catalog. It is likely they are two distinct
figs. If we find out with certainty that
does not exist in a tan shirt as currently described we can always merge him
to the new fig.
|
|
Author: | maggiec | Posted: | Jun 26, 2018 22:15 | Subject: | Re: Verifying Clickits 7518 | Viewed: | 27 times | Topic: | Inventories | |
| In Catalog Inventories, StormChaser writes:
| However, we cannot know what Maggie's
set showed since the part listings weren't split until just 4 years ago.
|
Yes. And also yes, inventory was from a sealed set. I believe I parted it out,
but if I find the parts around intact I'll check.
|
|
Author: | maggiec | Posted: | May 10, 2018 17:49 | Subject: | Re: Inventory Change Request for Set 7817-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, SylvainLS writes:
| If I may add my brick: an inventory isn’t gospel truth, it’s a crowd-sourced
work-in-progress.
We might never know an inventory is “complete” / won’t ever change anymore: fifty
years from now, someone might dig up and open a sealed set with another variant
or extra.
|
Of course you're right. Your observation relates to all matters, though,
and touches on the very nature of truth itself. I am of the opinion that absolute
assurance is foolhardy and the wiser position to take regarding any fact is varying
degrees of certainty.
There is a celestial body we have named the Sun which casts light onto the Earth,
for example, but I am only 99% sure of that. I do not say it is a certainty
because it could be shown wrong one day.
|
Yep, we could all be looking at shadows on the wall of a cave.
|
|
Author: | maggiec | Posted: | Apr 6, 2018 23:17 | Subject: | Re: Inventory Change Request for Set 6411-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, ParisianStore writes:
| Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
I have bought the set 6411 on Ebay and the real palm trunk seems to be 2436b (empty hole, no slots inside).
All the parts are original because many of them were still clutched together and some of them are yellowed.
|
Unfortunately, I decided not to approve this request. I think you're probably
right and I'd like to get the undetermined entry out of the set inventory,
but there's no point in doing so if it's based on a source that I consider
unreliable.
If you find more reliable information in the future, then please resubmit the
request.
|
Aha, so when I took my Poolside Paradise back to the basement, I found a sealed
Sand Dollar Café. So lifting up the flap I can see that three of the segments
are 2536b (I can't make out the others). That should be enough to show that
6411 did come with the B-type.
Maggie
|
|
Author: | maggiec | Posted: | Apr 6, 2018 23:05 | Subject: | Re: Inventory Change Request for Set 6411-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, maggiec writes:
| but I did find three open
|
Thanks for checking! I updated the inventory of that set to 2536a, although
I didn't put 2536b as an alternate. If you think it would be reasonable
to include the alternate also, then let me know and I can do it.
|
Okay, so I went down to the basement (which I hate to do after dark even though
it's just as dark down there during midday) to take a look at a sealed one
in my shop figuring I'd find 2536b, as these sets were from a later run purchased
from KB Toy Liquidators a year or two after they were at other stores, but the
four trunk segments I can see through the window under the flap are all 2536a.
My gut feeling is that both variations appeared in Paradisa sets, and I'd
probably have them as alternates, but I can understand if you want to wait for
more definitive evidence.
|
|
Author: | maggiec | Posted: | Apr 6, 2018 14:05 | Subject: | Re: Inventory Change Request for Set 6411-1 | Viewed: | 41 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, ParisianStore writes:
| Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
I have bought the set 6411 on Ebay and the real palm trunk seems to be 2436b (empty hole, no slots inside).
All the parts are original because many of them were still clutched together and some of them are yellowed.
|
I'm torn on this one between my desire to get the undetermined entries out
of set inventories and the knowledge that used sets on eBay are not reliable
sources.
I did submit a catalog change request to change the title of
to show that it was an undetermined entry. I'll be looking through parts
today and submitting title change requests for any other parts like this which
are undetermined, but don't state that in the title.
|
I just looked in my closet couldn't find any
but I did find three open
One (which I bought new) has the trunk segments still sealed in an inner bag.
They are all
One (which has all the parts to the set and nothing else) has all
but the poster is a bit wrinkled and the price tag looks like it's from a
store I never shopped at, so I suspect I got this from a garage sale. The third
has all the parts and has been built, but still has some of the original inner
bags (open) in the box. It has three
and three
I know I have more Paradisa sets, but these are just a few I found right away
in my bedroom closet. FWIW,
Maggie
|
|
Author: | maggiec | Posted: | Feb 16, 2018 21:44 | Subject: | Re: Inventory Change Request for Set 70102-1 | Viewed: | 42 times | Topic: | Inventories Requests | |
| In Inventories Requests, WoutR writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, Brixalotl writes:
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Brixalotl writes:
| Please make changes to the following inventory:
* Add 1 Part 54821 Trans-Dark Blue Bionicle Zamor Sphere (Ball) (Alternate) (match ID 2)
* Change 1 Part Trans-Medium Blue 54821 Bionicle Zamor Sphere (Ball) {match ID 0 to 2}
Comments from Submitter:
found both color variants during part out. Thanks
|
Would you mind posting a side-by-side comparison photo of the two different color
variants you found?
Thanks in advance.
|
Sure, Thanks again
|
As far as I know many Zamor spheres are actually multicolored. The mix causes
the different appearance. I think that there are at least four "shades" of all
the transparent-multicolor spheres.
There is a catalog note on these parts, but the color causes much confusion.
We might need additional catalog images for all of them, showing the variation.
|
A quick image - probably not the complete range that can be found.
|
We've gone ahead and added it to the additional images for
Please let us know if you prefer we didn't use it, otherwise, thanks!
Maggie
|
|
Author: | maggiec | Posted: | Feb 7, 2018 23:05 | Subject: | Inventory Change Request for Set 4613985-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
Author: | maggiec | Posted: | Feb 7, 2018 22:55 | Subject: | Inventory Change Request for Set 3746-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
Author: | maggiec | Posted: | Feb 7, 2018 22:48 | Subject: | Inventory Change Request for Set 5857-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
Author: | maggiec | Posted: | Feb 7, 2018 22:24 | Subject: | Inventory Change Request for Set 1374-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
Author: | maggiec | Posted: | Feb 7, 2018 22:21 | Subject: | Inventory Change Request for Set 7009-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
Author: | maggiec | Posted: | Feb 7, 2018 22:19 | Subject: | Inventory Change Request for Set 4701-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
Author: | maggiec | Posted: | Feb 7, 2018 22:17 | Subject: | Inventory Change Request for Set 5378-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Tan {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
|
Author: | maggiec | Posted: | Feb 6, 2018 23:18 | Subject: | Inventory Change Request for Set 7194-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 8 Part Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 26 Part Sand Green {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
|
Author: | maggiec | Posted: | Feb 6, 2018 23:11 | Subject: | Inventory Change Request for Set 4706-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
Author: | maggiec | Posted: | Feb 6, 2018 23:00 | Subject: | Inventory Change Request for Set 4729-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
|
Author: | maggiec | Posted: | Sep 17, 2017 23:40 | Subject: | Re: Inventory Change Request for Set 6111-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, admin_russell writes:
| In Inventories Requests, maggiec writes:
| In Inventories Requests, cptnruthless writes:
| In Inventories Requests, admin_russell writes:
| In Inventories Requests, cptnruthless writes:
| Please make changes to the following inventory:
* Add 1 Part 50947pb028L Blue Vehicle, Mudguard 1 x 4 1/2 with 'TURBO OIL' Pattern Model Left Side (Sticker) - Set 6111 (Counterpart)
* Add 1 Part 50947pb028R Blue Vehicle, Mudguard 1 x 4 1/2 with 'TURBO OIL' Pattern Model Right Side (Sticker) - Set 6111 (Counterpart)
* Add 1 Part 6081pb022 Black Brick, Modified 2 x 4 x 1 1/3 with Curved Top with 'POLICE', Taillights and Highway Patrol 'GS-4080' License Plate Pattern (Sticker) - Set 6111 (Counterpart)
|
WARNING: For those of you with dyslectic tendencies, the following discussion
may make your head spin.
The 2 blue stickered parts are correct, and they are also correct for a related
set which I have added them to.
The black stickered part is a bit of an enigma. First, there are no 6111-1 instructions.
There were just the four instructions from the related sets included in one box:
Second, the 8665-1 instructions never show the back of the racer where the "tailights"
sticker is applied. Maybe there is an official box picture somewhere that shows
it, but I haven't been able to find one yet. Still, it's pretty safe
to say the sticker was applied to that piece - we don't have to be pedantic.
However, and this is where things get sticky, the stickered part in the catalog
doesn't match the ones on the sticker sheets of either set:
[p=8665stk01]
[p=6111stk03]
Furthermore, there are double numbers for the sticker sheet, meaning that apparently
either version could have have come in either set.
What would really help at this point is a nice image of the GS-4080 sticker sheet,
and also a knowledge of which set it came from.
Anyone, anyone...?
Russell
|
Now I'm thinking it came from . But there's not a large sticker
image to confirm.
|
We've changed the entry to indicate that, as it does appear the most likely
source when you peruse the category. Please let us know if you get further confirmation.
Thanks!
Maggie
|
I agree, that is the best we can do for now. I found an interesting quote in
a Brickset review of 8665-1:
This car was redone ever so slightly in the Tuner Garage set (different patrol
car # on the stickers).
The patrol car number in 8665-1 is 5472, but in the Tuner Garage it is 4275
[p=3069bpb601]
So I think it highly probable they transposed the license plate numbers as well.
|
Yeah, I've heard items like the license plates often have little easter eggs
like designers' initials. etc.
|
|
Author: | maggiec | Posted: | Sep 17, 2017 23:34 | Subject: | Re: Inventory Change Request for Set 6111-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, maggiec writes:
| In Inventories Requests, cptnruthless writes:
| In Inventories Requests, admin_russell writes:
| In Inventories Requests, cptnruthless writes:
| Please make changes to the following inventory:
* Add 1 Part 50947pb028L Blue Vehicle, Mudguard 1 x 4 1/2 with 'TURBO OIL' Pattern Model Left Side (Sticker) - Set 6111 (Counterpart)
* Add 1 Part 50947pb028R Blue Vehicle, Mudguard 1 x 4 1/2 with 'TURBO OIL' Pattern Model Right Side (Sticker) - Set 6111 (Counterpart)
* Add 1 Part 6081pb022 Black Brick, Modified 2 x 4 x 1 1/3 with Curved Top with 'POLICE', Taillights and Highway Patrol 'GS-4080' License Plate Pattern (Sticker) - Set 6111 (Counterpart)
|
WARNING: For those of you with dyslectic tendencies, the following discussion
may make your head spin.
The 2 blue stickered parts are correct, and they are also correct for a related
set which I have added them to.
The black stickered part is a bit of an enigma. First, there are no 6111-1 instructions.
There were just the four instructions from the related sets included in one box:
Second, the 8665-1 instructions never show the back of the racer where the "tailights"
sticker is applied. Maybe there is an official box picture somewhere that shows
it, but I haven't been able to find one yet. Still, it's pretty safe
to say the sticker was applied to that piece - we don't have to be pedantic.
However, and this is where things get sticky, the stickered part in the catalog
doesn't match the ones on the sticker sheets of either set:
[p=8665stk01]
[p=6111stk03]
Furthermore, there are double numbers for the sticker sheet, meaning that apparently
either version could have have come in either set.
What would really help at this point is a nice image of the GS-4080 sticker sheet,
and also a knowledge of which set it came from.
Anyone, anyone...?
Russell
|
Now I'm thinking it came from . But there's not a large sticker
image to confirm.
|
We've changed the entry to indicate that, as it does appear the most likely
source when you peruse the category. Please let us know if you get further confirmation.
Thanks!
Maggie
|
Brickowl has a better image of the sticker sheet for set 8681. If you zoom in
a bit you can see that it says GS-4080 on that sticker sheet.
|
Cool, thanks for verifying!
|
|
Author: | maggiec | Posted: | Sep 17, 2017 22:16 | Subject: | Re: Inventory Change Request for Set 6111-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, cptnruthless writes:
| In Inventories Requests, admin_russell writes:
| In Inventories Requests, cptnruthless writes:
| Please make changes to the following inventory:
* Add 1 Part 50947pb028L Blue Vehicle, Mudguard 1 x 4 1/2 with 'TURBO OIL' Pattern Model Left Side (Sticker) - Set 6111 (Counterpart)
* Add 1 Part 50947pb028R Blue Vehicle, Mudguard 1 x 4 1/2 with 'TURBO OIL' Pattern Model Right Side (Sticker) - Set 6111 (Counterpart)
* Add 1 Part 6081pb022 Black Brick, Modified 2 x 4 x 1 1/3 with Curved Top with 'POLICE', Taillights and Highway Patrol 'GS-4080' License Plate Pattern (Sticker) - Set 6111 (Counterpart)
|
WARNING: For those of you with dyslectic tendencies, the following discussion
may make your head spin.
The 2 blue stickered parts are correct, and they are also correct for a related
set which I have added them to.
The black stickered part is a bit of an enigma. First, there are no 6111-1 instructions.
There were just the four instructions from the related sets included in one box:
Second, the 8665-1 instructions never show the back of the racer where the "tailights"
sticker is applied. Maybe there is an official box picture somewhere that shows
it, but I haven't been able to find one yet. Still, it's pretty safe
to say the sticker was applied to that piece - we don't have to be pedantic.
However, and this is where things get sticky, the stickered part in the catalog
doesn't match the ones on the sticker sheets of either set:
[p=8665stk01]
[p=6111stk03]
Furthermore, there are double numbers for the sticker sheet, meaning that apparently
either version could have have come in either set.
What would really help at this point is a nice image of the GS-4080 sticker sheet,
and also a knowledge of which set it came from.
Anyone, anyone...?
Russell
|
Now I'm thinking it came from . But there's not a large sticker
image to confirm.
|
We've changed the entry to indicate that, as it does appear the most likely
source when you peruse the category. Please let us know if you get further confirmation.
Thanks!
Maggie
|
|
Author: | maggiec | Posted: | Sep 14, 2017 22:39 | Subject: | Re: Inventory Change Request for Set 6991-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, simonkinchow writes:
| Please make changes to the following inventory:
* Delete 2 Part 4504 Blue Hinge Plate 1 x 6 with 2 and 3 Fingers On Ends
Comments from Submitter:
I got this set but didn't found this parts in it , even in my instruction.
|
Please see the note on the inventory.
|
Author: | maggiec | Posted: | Jun 21, 2017 13:04 | Subject: | Inventory Change Request for Set 8117-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3068bpb0405 Black Tile 2 x 2 with Black Robot Face and Yellow Splatter Pattern (Sticker) - Set 8117 (Counterpart)
Comments from Submitter:
Sticker appears to be misapplied and properly belongs on the Trans-Black panel
Thanks!
|
|
Author: | maggiec | Posted: | Apr 18, 2017 18:17 | Subject: | Re: Inventory Change Request for Set 60150-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 2 Part 6180pb103R Yellow Tile, Modified 4 x 6 with Studs on Edges with 'CITY PIZZA' and Store Hours Upper Right, Chef and Italian Flag Colors Pattern (Sticker) - Set 60150 (Counterpart)
|
There should be only one of this part in the inventory because the chef is on
the right on one panel and on the left on the other. [P=60150stk01a]
This is why we changed the number of the submitted panel. If the panel for
the other side gets submitted, it should be numbered "6180pb103L". Thanks!
Maggie
|
|
Author: | maggiec | Posted: | Apr 12, 2017 12:02 | Subject: | Re: Inventory Change Request for Minifig col271 | Viewed: | 36 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| I apologize if I just made a giant mess this morning. I may have run past what
I "know", but it seems like there was a significant time gap between the Paradisa
sets with the old print and when new minifigures started showing up in the new
mold. I made inventory change requests only on the ones that started showing
up in 2005, which was 8 years after the mold change according to information
shown below. I saw these replies now as I was pondering if there was some way
to let hundreds of people know that their inventory may contain a newly created
part.
|
It's not your fault, Jon, I should have thought more before approving this
torso in particular. And no, unfortunately the system was set up to make it
very difficult to send a mass notification to sellers listing the items because
of the worry about spamming people.
| In Inventories Requests, maggiec writes:
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Delete 1 Part 973px126c01 White Torso Paradisa Windsurf Board with Sunset Pattern / Yellow Arms / Yellow Hands
* Add 1 Part 973px126newc01 White Torso Paradisa Windsurf Board with Sunset Pattern, Inside with Ribs (Reissue) / Yellow Arms / Yellow Hands
|
May I ask what the difference is on this 'Inside with ribs' torsos compared
to the same torsos that are 10 years old?
|
The original torsos first appeared in 1994, so those are ~23 years old. The torsos
back then had short ribs inside the torso (like a jumper with bottom stud holder)
instead of the long ribs that appeared around 1998 and continue into today. Therefore,
there would be no difference between a modern torso and one 10 years ago, but
there would be a difference between a modern torso and the original version of
this torso. I believe this helps to set up a nice precedent to get more modern
torsos with classic prints into the catalog, so that vintage minifigs and modern
minifigs both have the proper torso mold for the time period they were released.
Cheers,
Randy
|
The large X-rib on that particular torso has been around for at least 8 years...
So what is the intention? Change the inventories of all the minfigs attached
to it
That would cause quite a lot of problems with listed ones, which means new minifigs
would need to be created, old ones marked for deletion, and the same would need
to be done with the torsos themselves...
And then some of you wanna do the same for hundreds of minifigs
I think it would be a really bad precedent, as it's gonna clutter up to catalog
if done 'the right way'. And any other way is gonna mess up peoples listings.
Count to that the many figs that might have been made with both torsos (transitions
periods) and it's gonna be hell to manage it, not to mention it's gonna
mess peoples collections who have figs sorted 'by number', when suddently
they are going to be renumbered or marked for deletion, and +20% of minifigs
will need to be added in catalog...
The catalog should not handle such (and that was Dan's desire as he made
the initial rules about minifigs), people can handle that for themselves if they
want to.
This is a marketplace in the first place, not a 'collectors database'
place, there are other sites for that...
|
Actually Eric, with the Paradisa fig you're right. We originally added the
different torsos because it would be wrong (in the eyes of sticklers for accuracy,
anyway) to have a fig reproduction torso in an original Blacktron set, say.
They are easily distinguished because of the print/lack of print on the neck.
But the range of years over which
definitely raises issues because some of the newer figs have the neck print as
well as the new style ribs so there are more than two distinct variations. We
may have to rethink this one.
Maggie
| | | It ain't clear on the images (no comparison image between 'old' version
and 're-issue':
|
|
|
|
|
|
|
Author: | maggiec | Posted: | Apr 12, 2017 11:45 | Subject: | Re: Inventory Change Request for Minifig col271 | Viewed: | 33 times | Topic: | Inventories Requests | |
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Delete 1 Part 973px126c01 White Torso Paradisa Windsurf Board with Sunset Pattern / Yellow Arms / Yellow Hands
* Add 1 Part 973px126newc01 White Torso Paradisa Windsurf Board with Sunset Pattern, Inside with Ribs (Reissue) / Yellow Arms / Yellow Hands
|
May I ask what the difference is on this 'Inside with ribs' torsos compared
to the same torsos that are 10 years old?
|
The original torsos first appeared in 1994, so those are ~23 years old. The torsos
back then had short ribs inside the torso (like a jumper with bottom stud holder)
instead of the long ribs that appeared around 1998 and continue into today. Therefore,
there would be no difference between a modern torso and one 10 years ago, but
there would be a difference between a modern torso and the original version of
this torso. I believe this helps to set up a nice precedent to get more modern
torsos with classic prints into the catalog, so that vintage minifigs and modern
minifigs both have the proper torso mold for the time period they were released.
Cheers,
Randy
|
The large X-rib on that particular torso has been around for at least 8 years...
So what is the intention? Change the inventories of all the minfigs attached
to it
That would cause quite a lot of problems with listed ones, which means new minifigs
would need to be created, old ones marked for deletion, and the same would need
to be done with the torsos themselves...
And then some of you wanna do the same for hundreds of minifigs
I think it would be a really bad precedent, as it's gonna clutter up to catalog
if done 'the right way'. And any other way is gonna mess up peoples listings.
Count to that the many figs that might have been made with both torsos (transitions
periods) and it's gonna be hell to manage it, not to mention it's gonna
mess peoples collections who have figs sorted 'by number', when suddently
they are going to be renumbered or marked for deletion, and +20% of minifigs
will need to be added in catalog...
The catalog should not handle such (and that was Dan's desire as he made
the initial rules about minifigs), people can handle that for themselves if they
want to.
This is a marketplace in the first place, not a 'collectors database'
place, there are other sites for that...
|
Actually Eric, with the Paradisa fig you're right. We originally added the
different torsos because it would be wrong (in the eyes of sticklers for accuracy,
anyway) to have a fig reproduction torso in an original Blacktron set, say.
They are easily distinguished because of the print/lack of print on the neck.
But the range of years over which
definitely raises issues because some of the newer figs have the neck print as
well as the new style ribs so there are more than two distinct variations. We
may have to rethink this one.
Maggie
| | | It ain't clear on the images (no comparison image between 'old' version
and 're-issue':
|
|
|
|
|
Author: | maggiec | Posted: | Mar 17, 2017 16:37 | Subject: | Inventory Change Request for Set 4696-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Orange {3049 Slope 45 2 x 1 Double / Inverted - Undetermined Underside to 3049b Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder} (Extra)
* Change 1 Part Dark Orange {3044 Slope 45 2 x 1 Double - Undetermined Underside to 3044b Slope 45 2 x 1 Double - with Inside Bar} (Extra)
|
|
Author: | maggiec | Posted: | Nov 10, 2016 22:38 | Subject: | Re: Inventory Change Request for Set 7645-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, karenries writes:
| Please make changes to the following inventory:
* Add 1 Part 41883pb006 Trans-Orange Windscreen 6 x 4 x 2 Wedge Curved with Silver Bar and Crosshairs Pattern (Sticker) - Set 7645
* Add 2 Part 3069bpb527 Black Tile 1 x 2 with Red Nexo Knights Monster Minifig Head with Yellow Eyes and Fangs Pattern
|
You mean [P=3069bpb528]
We held your pending number (...pb527) while we were waiting for your image,
and meanwhile an item with that number was submitted and approved, so we assigned
your part the next number up.
|
|
Author: | maggiec | Posted: | Nov 7, 2016 14:14 | Subject: | Re: Add reason for closing store | Viewed: | 74 times | Topic: | Suggestions | |
| In Suggestions, JulieK writes:
| We now need to explain to BL why we are closing our store.
I am closing for a few days this week because I want to get the current orders
out and take a few days off from Lego. The options given don't include that
choice. They do say "vacation" so I'll choose that one.
How about an this for an option: "Just taking some time off".
|
or simply "Other".
| Really, I don't think I need to explain myself, but whatever, their sandbox.
Julie
|
|
|
Author: | maggiec | Posted: | Apr 25, 2016 14:23 | Subject: | Re: Inventory Change Request for Set 3409-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Brockmeister writes:
| Please make changes to the following inventory:
* Change 26 Part Red 3020 Plate 2 x 4 {Extra to Regular}
Comments from Submitter:
The 26 Red Plate 2x4 are Regular parts needed to secure the field together in the main model. They are used in step 7 of the Instructions. They should not be listed as Extra.
|
Looks like there is a note at the bottom of the inventory related to this.
|
|
Author: | maggiec | Posted: | Apr 10, 2016 19:42 | Subject: | Re: Price Manipulating - What Prevention? | Viewed: | 68 times | Topic: | Suggestions | |
| In Suggestions, ToriHada writes:
| Voted no. As others have repeatedly mentioned, BrickLink should not be in the
business of policing, limiting, dictating, challenging or questioning prices,
or punishing sellers for their prices. Apart from the obvious legal constraints,
there is the arbitrary subjective element of defining what is an "absurd" price.
There are better ways to handle this so-called "problem" that don't involve
legal risks or arbitrariness:
http://www.bricklink.com/message.asp?ID=483330
http://www.bricklink.com/message.asp?ID=483378
Thor
|
I agree. I also would vote no but this shouldn't even be a suggestion. IANAL
but I can't imagine it would be legal to dictate the prices at which sellers
can list their items, no matter how outrageous.
|
|
Author: | maggiec | Posted: | Mar 14, 2016 14:34 | Subject: | Re: Inventory Change Request for Set 316-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| In Inventories Requests, heikoloogi writes:
| Please make changes to the following inventory:
* Add 1 Part x146c01pb05 Red Boat Hull Smooth Middle 8 x 6 x 3 1/3, Deck Color Light Gray with White 'FIRE FIGHTER' Pattern on Both Sides (Stickers) - Sets 316 and (Counterpart)
|
misleading instructions where the sticker is over 3 parts
http://www.peeron.com/scans/316-1/8
|
*sigh*
|
|
Author: | maggiec | Posted: | Mar 7, 2016 15:27 | Subject: | Re: Inventory Change Request for Set 6359-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| snip
|
Hmm, you would think, wouldn't you? I just had a look at the instructions,
and they only show the sticker being applied to one side. So to me it
is ambiguous, as it could be considered implicit that it is one both sides because
of the existence of the other sticker and the fact that the back of the assembly
is visible on the built stable. If we don't get more concrete evidence one
way or another, we could add a note to the entry for sellers to indicate whether
they have the sticker on one or both sides.
|
Hi
Spoken about both sides, this one has a 'police' sticker on the outside
same as
but my request months/years ago was not accept
also viewable on box but not on instructions steps, stickersheet has 4 'police'
stickers
Stefaan
|
I suspect you are right Stefaan, we've added a similar note to the entry
as well as your image as an additional image. Hopefully having the additional
image with the police sticker on the other side won't be too confusing to
people (at least not if they read the additional notes! ). Thanks!
Maggie
|
|
Author: | maggiec | Posted: | Mar 7, 2016 14:07 | Subject: | Re: Inventory Change Request for Set 6359-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, RobErNat writes:
|
Yes, that would be nice, something similar to:
Cheers, Eric
|
Thanks for finding that, it makes the perfect "model" for what to say in the
notes! [P=BA06pb02]
|
|
Author: | maggiec | Posted: | Mar 7, 2016 13:46 | Subject: | Re: Inventory Change Request for Set 6359-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, maggiec writes:
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, StormChaser writes:
| Please make changes to the following inventory:
* Add 1 Part 6359stk01 (Not Applicable) Sticker for Set 6359 - (190425)
|
I'm a bit puzzled:
obviously a nice catch in regards to the sheet, but
is holding a picture with the exact same number as
[p=6359stk01u]
So it's not really solving the matter
Why not add the picture you posted before?
http://www.bricklink.com/message.asp?ID=975474
Obviously incomplete, but it's not the only sheet like that in catalog.
And, it could also be 'altered' quite easely
|
The pictures were replaced with a proper (unaltered!) one, but may not show up
if you click on the large image in the forum post, even after a hard refresh.
It should show up in the entry though.
Maggie
|
Hi Maggie,
Thanks for pointing towards it.
I cleared my browser history, logged off and in again, now it shows properly
for me (nice image btw), if others have the same error they might need to do
the same thing.
so problem solved on the image
While where at it
I have an unlisted
[p=BA06pb02]
However mine comes with stickers both sides (as there are 2 stickers on the sheet)
However the entry for the assembly does not say 'both sides' (stickers).
Another seller is also selling with stickers both sides.
Is it plausible this assembly should have stickers both sides.
Eric
|
Hmm, you would think, wouldn't you? I just had a look at the instructions,
and they only show the sticker being applied to one side. So to me it
is ambiguous, as it could be considered implicit that it is one both sides because
of the existence of the other sticker and the fact that the back of the assembly
is visible on the built stable. If we don't get more concrete evidence one
way or another, we could add a note to the entry for sellers to indicate whether
they have the sticker on one or both sides.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|