Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | MidwestBrick | Posted: | Sep 17, 2019 12:58 | Subject: | Re: Request a Quote | Viewed: | 48 times | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| In Suggestions, kelmgo writes:
| I am after a few pieces to complete a few kits and am going from one checkout
to another, then to another and then cancelling the orders (before payment) because
the vendors haven't got the "Request a Quote" provision set up.
Clearly it would save a lot of stuffing around if you know the full cost incl
P&H before hand.
Even better - there should be a little icon or something next to the vendors
name to indicate whether they send quotes or not so you don't have to go
through the checkouts to find out right at the end.
This is what I'm experiencing in Australia
|
Part of what you suggest exists: Stores with a thunderbolt icon have instant
checkout, which means that you see the grand total before you order. There isn't
an icon to distinguish quote sellers from non-quote sellers, however. But even
if there would be such an icon, I'm not sure it would do sellers justice,
as a non quote seller may have a very clear table of shipping costs, which could
be just as good or better than asking a quote.
|
I disagree and think it is a valid request to include an icon so shoppers know
they can get a quote from that store immediately instead of having to look for
it or go through the check-out phase.
Using IC is impossible to hit on every scenario and even sometimes the IC may
work, but a buyer still wants to use the Quote system because maybe the IC is
charging too much. There is nothing wrong with a buyer double-checking to see
if their order actually fits in a cheaper shipping option than what IC is calculating.
|
|
Author: | Turez | Posted: | Sep 17, 2019 12:52 | Subject: | Re: Inventory Change Request for Set 2507-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End}
* Change 2 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Flat Silver {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
Unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=478630
and at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=497207
and at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=503110
I believe this is the same case as we already had in sets 2504 and 2520.
|
|
|
|
Author: | Turez | Posted: | Sep 17, 2019 12:51 | Subject: | Inventory Change Request for Set 2507-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End}
* Change 2 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Flat Silver {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
Unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=478630
and at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=497207
and at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=503110
I believe this is the same case as we already had in sets 2504 and 2520.
|
|
Author: | Brickwilbo | Posted: | Sep 17, 2019 12:50 | Subject: | Re: Request a Quote | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, kelmgo writes:
| I am after a few pieces to complete a few kits and am going from one checkout
to another, then to another and then cancelling the orders (before payment) because
the vendors haven't got the "Request a Quote" provision set up.
|
You can always use the Contact Store button and inquire about the shipping costs.
| Clearly it would save a lot of stuffing around if you know the full cost incl
P&H before hand.
Even better - there should be a little icon or something next to the vendors
name to indicate whether they send quotes or not so you don't have to go
through the checkouts to find out right at the end.
This is what I'm experiencing in Australia
|
|
|
Author: | Teup | Posted: | Sep 17, 2019 12:38 | Subject: | Re: Request a Quote | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, kelmgo writes:
| I am after a few pieces to complete a few kits and am going from one checkout
to another, then to another and then cancelling the orders (before payment) because
the vendors haven't got the "Request a Quote" provision set up.
Clearly it would save a lot of stuffing around if you know the full cost incl
P&H before hand.
Even better - there should be a little icon or something next to the vendors
name to indicate whether they send quotes or not so you don't have to go
through the checkouts to find out right at the end.
This is what I'm experiencing in Australia
|
Part of what you suggest exists: Stores with a thunderbolt icon have instant
checkout, which means that you see the grand total before you order. There isn't
an icon to distinguish quote sellers from non-quote sellers, however. But even
if there would be such an icon, I'm not sure it would do sellers justice,
as a non quote seller may have a very clear table of shipping costs, which could
be just as good or better than asking a quote.
|
|
Author: | kelmgo | Posted: | Sep 17, 2019 12:33 | Subject: | Request a Quote | Viewed: | 124 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I am after a few pieces to complete a few kits and am going from one checkout
to another, then to another and then cancelling the orders (before payment) because
the vendors haven't got the "Request a Quote" provision set up.
Clearly it would save a lot of stuffing around if you know the full cost incl
P&H before hand.
Even better - there should be a little icon or something next to the vendors
name to indicate whether they send quotes or not so you don't have to go
through the checkouts to find out right at the end.
This is what I'm experiencing in Australia
|
|
Author: | Turez | Posted: | Sep 17, 2019 12:14 | Subject: | Inventory Change Request for Set 60139-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 59349pb162 White Panel 1 x 6 x 5 with Blue 'POLICE' on White Background and Gold Police Badge Pattern (Sticker) - Set 60139 (Counterpart)
* Add 1 Part 52031pb133 White Wedge 4 x 6 x 2/3 Triple Curved with Blue 'POLICE' and '04' on White Background Pattern (Sticker) - Set 60139 (Counterpart)
Comments from Submitter:
https://www.lego.com/biassets/bi/6188728.pdf
(page 31)
https://www.lego.com/biassets/bi/6188737.pdf
(page 64)
|
|
Author: | Turez | Posted: | Sep 17, 2019 12:14 | Subject: | Inventory Change Request for Set 41310-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87079pb632 White Tile 2 x 4 with Gift Box, Envelope and Arrow Pattern (Sticker) - Set 41310 (Counterpart)
* Add 1 Part 87079pb631 White Tile 2 x 4 with Party Hats, Bow, Envelope and Bouquet Pattern (Sticker) - Set 41310 (Counterpart)
Comments from Submitter:
https://www.lego.com/biassets/bi/6195937.pdf
(page 24 & 26)
|
|
Author: | Turez | Posted: | Sep 17, 2019 12:13 | Subject: | Inventory Change Request for Set 70607-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1262 Tan Tile 2 x 2 with Groove with Red Cherry Pattern (Sticker) - Set 70607 (Counterpart)
Comments from Submitter:
https://www.lego.com/biassets/bi/6213448.pdf
(page 41)
|
|
Author: | axaday | Posted: | Sep 17, 2019 12:13 | Subject: | Re: Inventory Change Request for Set 9648-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Alternate) (match ID 7)
* Change 2 Part Yellow x89 Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 {Regular to Alternate} {match ID 0 to 7}
|
There were originally 2x x89 in this inventory. You added 1x x90. Should that
be 2? Or was there only 1 in this set?
|
2 on a belt holder
|
|
Author: | Turez | Posted: | Sep 17, 2019 12:13 | Subject: | Inventory Change Request for Set 75882-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 88930pb105 Black Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes with Green Graph and Buttons on Silver Background Pattern (Sticker) - Set 75882 (Counterpart)
* Add 1 Part 88930pb104 Black Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes with Red Ferrari on Green and White Background Pattern (Sticker) - Set 75882 (Counterpart)
Comments from Submitter:
https://www.lego.com/biassets/bi/6216895.pdf
(page 65)
|
|
Author: | randyf | Posted: | Sep 17, 2019 09:16 | Subject: | Re: Inventory Change Request for Set 9648-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Alternate) (match ID 7)
* Change 2 Part Yellow x89 Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 {Regular to Alternate} {match ID 0 to 7}
|
There were originally 2x x89 in this inventory. You added 1x x90. Should that
be 2? Or was there only 1 in this set?
|
It's fixed. Thanks for the catch. I was thinking about the rubber band project
too much.
|
|
Author: | paulvdb | Posted: | Sep 17, 2019 09:11 | Subject: | Re: Inventory Change Request for Set 9648-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Alternate) (match ID 7)
* Change 2 Part Yellow x89 Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 {Regular to Alternate} {match ID 0 to 7}
|
There were originally 2x x89 in this inventory. You added 1x x90. Should that
be 2? Or was there only 1 in this set?
|
|
Author: | randyf | Posted: | Sep 17, 2019 08:32 | Subject: | Re: Inventory Change Request for Set 9648-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Alternate) (match ID 7)
* Change 2 Part Yellow x89 Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 {Regular to Alternate} {match ID 0 to 7}
|
I never took any bands off their holders and even sold some that way. But he
is right. Mine are 5x5 too.
|
This is one of the things that needs to be fixed with the rubber belt project
for the catalog. I don't believe that the x89 exists in yellow.
|
|
Author: | axaday | Posted: | Sep 17, 2019 07:05 | Subject: | Re: Inventory Change Request for Set 9648-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Alternate) (match ID 7)
* Change 2 Part Yellow x89 Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 {Regular to Alternate} {match ID 0 to 7}
|
I never took any bands off their holders and even sold some that way. But he
is right. Mine are 5x5 too.
|
|
Author: | bb53904 | Posted: | Sep 17, 2019 04:45 | Subject: | Re: Countdown calendar (40222 and others?) | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, sonnich writes:
| Hi
There has been 2 countdown calendars as I know it - one is 40222, there was another
one?
I cannot find it can anyone help?
They are meant to be rebuilt every day, not like the city/star wars calendards,
and were not on sale, but as a bonus on purchase
|
|
|
Author: | Soviet | Posted: | Sep 17, 2019 04:11 | Subject: | Re: Countdown calendar (40222 and others?) | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, sonnich writes:
| Hi
There has been 2 countdown calendars as I know it - one is 40222, there was another
one?
I cannot find it can anyone help?
They are meant to be rebuilt every day, not like the city/star wars calendards,
and were not on sale, but as a bonus on purchase
|
Maybe this?
|
|
Author: | sonnich | Posted: | Sep 17, 2019 04:05 | Subject: | Countdown calendar (40222 and others?) | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
|
| Hi
There has been 2 countdown calendars as I know it - one is 40222, there was another
one?
I cannot find it can anyone help?
They are meant to be rebuilt every day, not like the city/star wars calendards,
and were not on sale, but as a bonus on purchase
|
Author: | xoshimin | Posted: | Sep 17, 2019 02:52 | Subject: | Inventory Change Request for Set 9648-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5 (Alternate) (match ID 7)
* Change 2 Part Yellow x89 Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 {Regular to Alternate} {match ID 0 to 7}
|
|
Author: | xoshimin | Posted: | Sep 17, 2019 02:50 | Subject: | Inventory Change Request for Set 9686-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 62821b Dark Bluish Gray Technic, Gear Differential with Inner Tabs and Closed Center, 28 Bevel Teeth (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 62821a Technic, Gear Differential with Inner Tabs and Open Center, 28 Bevel Teeth {Regular to Alternate} {match ID 0 to 1}
|
|
Author: | paulvdb | Posted: | Sep 16, 2019 23:04 | Subject: | Re: Inventory Change Request for Set 6373-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 2 Part 3024 Yellow Plate 1 x 1
* Add 1 Part 3794a Yellow Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Change {1 to 2} Part Red 3069b Tile 1 x 2 with Groove
Comments from Submitter:
I got a used copy in very good condition. Even the sprues are there. These parts were extra in the box. I found almost all of them on the models on back of the box.
|
- The yellow jumper can be seen in two models.
- Two yellow 1*1 plate can be seen on the ship (left-side top) Sorry for the
quality of the image. The yellow plates 4*1, 1*1 and 10*1 are used on each side
of the ship, on the edge.
- Two 1*2 red tiles are used on various red or yellow motorcycles.
- It is likely that on the bottom left-side of model, three yellow 1*1 plates
are used. But the box art is not clear.
I believe three yellow plates 1*1 came with this set. Whether the third is extra
is used on an alternate model is not clear.
|
|
Based on your photos the presence of the red 3069b and yellow 3794a is clearly
visible in the alternate models. Can you post photos showing a bit more detail
of the alternate models where the yellow 3024 are used? It would probably be
a bit better visible if you posted close-ups of just those models instead of
the whole back of the box.
|
|
Author: | Turez | Posted: | Sep 16, 2019 15:43 | Subject: | Re: Inventory Change Request for Set 70014-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Add 2 Part 93789 Pearl Dark Gray Minifigure, Weapon Pike / Spear - Flat End (Alternate) (match ID 1)
* Change 2 Part Pearl Dark Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End} {match ID 0 to 1}
Comments from Submitter:
4497: https://youtu.be/PWiub_-RSgM?t=372
(unboxing and building at https://youtu.be/w0b4rCDRkn4 )
93789: https://youtu.be/YQlYf3HgjPs?t=227
|
|
|
|
Author: | Turez | Posted: | Sep 16, 2019 15:43 | Subject: | Inventory Change Request for Set 70014-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 93789 Pearl Dark Gray Minifigure, Weapon Pike / Spear - Flat End (Alternate) (match ID 1)
* Change 2 Part Pearl Dark Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End} {match ID 0 to 1}
Comments from Submitter:
4497: https://youtu.be/PWiub_-RSgM?t=372
(unboxing and building at https://youtu.be/w0b4rCDRkn4 )
93789: https://youtu.be/YQlYf3HgjPs?t=227
|
|
Author: | randyf | Posted: | Sep 16, 2019 15:21 | Subject: | Re: Inventory Change Request for Book 9780756672812 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory: [B=9780756672812]
* Change 1 Part Pearl Light Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End}
Comments from Submitter:
Set unboxing and building at https://youtu.be/o5VsotsT2u4?t=371
|
|
The sword and spear are definitely Flat Silver in this video. I have a feeling
the original book had Pearl Light Gray parts and they were replaced by the new
Flat Silver parts in 2010. Therefore, I will add Flat Silver parts as alternates.
Cheers,
Randy
|
I'm sure you're right. I had only checked the mold, not the color.
What do you think about the language variants of these books? Should I submit
change requests according to the english version? (I haven't found any photos
or videos of them yet.)
|
I wouldn't yet. Different markets have different parts, and I do not know
if all of these books were produced and packaged in the same location at the
same time.
Cheers,
Randy
|
|
Author: | Turez | Posted: | Sep 16, 2019 14:51 | Subject: | Re: Inventory Change Request for Book 9780756672812 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, Turez writes:
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory: [B=9780756672812]
* Change 1 Part Pearl Light Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End}
Comments from Submitter:
Set unboxing and building at https://youtu.be/o5VsotsT2u4?t=371
|
|
The sword and spear are definitely Flat Silver in this video. I have a feeling
the original book had Pearl Light Gray parts and they were replaced by the new
Flat Silver parts in 2010. Therefore, I will add Flat Silver parts as alternates.
Cheers,
Randy
|
I'm sure you're right. I had only checked the mold, not the color.
What do you think about the language variants of these books? Should I submit
change requests according to the english version? (I haven't found any photos
or videos of them yet.)
https://www.bricklink.com/catalogItemIn.asp?P=4497u&in=B
Regards,
Jonas
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|