Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | SezaR  | | Posted: | Sep 16, 2019 04:06 | | Subject: | Inventory Change Request for Set 6373-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3024 Yellow Plate 1 x 1
* Add 1 Part 3794a Yellow Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
* Change {1 to 2} Part Red 3069b Tile 1 x 2 with Groove
Comments from Submitter:
I got a used copy in very good condition. Even the sprues are there. These parts were extra in the box. I found almost all of them on the models on back of the box.
|
 |
| Author: | paulvdb | | Posted: | Sep 16, 2019 00:17 | | Subject: | Re: Inventory Change Request for Set 9499-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, mgiglio writes:
| | Please make changes to the following inventory:
* Change {8 to 14} Part Trans-Orange 4073 Plate, Round 1 x 1 Straight Side
Comments from Submitter:
'm not sure i'm submitting this correctly, but what I am trying to accomplish is changing inventory of set 9499 for part 4073 in trans-orange from 8 to 14.
i have built this set twice. both times instructions called for 14 trans-orange 4073.
|
Are there different versions of instructions for this set? I just did a quick
glance through the instructions that I found at Brick set and only found 8.
|
|
| Author: | normann1974 | | Posted: | Sep 15, 2019 18:08 | | Subject: | Inventory Change Request for Set 76087-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 53451 Red Barb / Claw / Horn - Small (Extra)
* Change {1 to 2} Part Light Bluish Gray 48729b Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
Comments from Submitter:
I just parted out this set and found red 7 teeth and 10 LBG bars.
|
|
| Author: | Turez | | Posted: | Sep 15, 2019 16:59 | | Subject: | Re: Inventory Change Request for Set 7187-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 4 Part Reddish Brown {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 8 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Pearl Light Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End}
* Change 2 Part Flat Silver {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
Set unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=503905
The alternate Flat Silver spear was added in December 2011. Since the flat end version did not appear until 2012, I am changing both entries to the round end version. See also https://www.bricklink.com/messageThread.asp?ID=211103
|
|
|
|
| Author: | Turez | | Posted: | Sep 15, 2019 16:58 | | Subject: | Inventory Change Request for Set 7187-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Reddish Brown {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 8 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Pearl Light Gray {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End}
* Change 2 Part Flat Silver {4497u Minifigure, Weapon Pike / Spear - Undetermined End Version to 4497 Minifigure, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
Set unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=503905
The alternate Flat Silver spear was added in December 2011. Since the flat end version did not appear until 2012, I am changing both entries to the round end version. See also https://www.bricklink.com/messageThread.asp?ID=211103
|
|
| Author: | Turez | | Posted: | Sep 15, 2019 16:14 | | Subject: | Re: Inventory Change Request for Set 7879-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 6 Part White {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Set unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=479204
|
|
|
|
| Author: | Turez | | Posted: | Sep 15, 2019 16:13 | | Subject: | Inventory Change Request for Set 7879-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 6 Part White {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
* Change 2 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Set unboxing and building at http://www.brickshelf.com/cgi-bin/gallery.cgi?f=479204
|
|
| Author: | mgiglio | | Posted: | Sep 15, 2019 16:08 | | Subject: | Inventory Change Request for Set 9499-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {8 to 14} Part Trans-Orange 4073 Plate, Round 1 x 1 Straight Side
Comments from Submitter:
'm not sure i'm submitting this correctly, but what I am trying to accomplish is changing inventory of set 9499 for part 4073 in trans-orange from 8 to 14.
i have built this set twice. both times instructions called for 14 trans-orange 4073.
|
|
| Author: | paulvdb | | Posted: | Sep 15, 2019 15:47 | | Subject: | Re: Inventory Change Request for Set 702-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Delete 1 Part 2913 Blue Electric, Train Track Contact Base with Wire (97 cm)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Add 4 Part wheel2ac01 Red Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim)
* Change {2 to 1} Part Blue bb0236ac01 Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins
* Change 1 Part Blue 2913c01 Electric, Train Track Contact Base with Wire (97 cm) and Connector {Counterpart to Regular}
Comments from Submitter:
From sealed set contents, Catawiki 29351443.
Since I don't know anything about the blue 12V train era (This set is exactly twice my age!  ) I hope someone else can help here:
|
It's a bit before my time as well
| | - Should the wheels with gray rims be alternate parts?
|
If I remember correctly someone did write something about the transition between
the two colors of rims in another change request for a set from that time. Probably
Reza because he knows a lot about these older train sets. I'll have to look
it up when I have some more time.
| | - What is the wire with two connectors for? The photo shows it with 1x bb0236ac01 and 1x bb0093ac01, but the catalog image shows 2x bb0236ac01.
|
Probably for when you use the motor to build a car instead of a train. You can
see that the set includes the necessary wheels and tires for that. The train
track contact base is used to connect to the conducting rails when you use the
motor for a train, but when using it is a car you'd need a wire with two
connectors to connect it to the transformer. It appears that transformer 740
needs the bb093ac01 connector while the bb0236ac01 connector would go in the
motor.
Based on that it seems that the wire with two different connectors should be
correct for this set, but I am not familiar enough with the sets from that time
to be completely confident about that. Especially when the box art shows a wire
with two connectors bb0236ac01. So I would appreciate input from people more
familiar with these sets from the late 1960s.
|
|
| Author: | Turez | | Posted: | Sep 15, 2019 15:26 | | Subject: | Re: Inventory Change Request for Set 7642-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
|
|
|
|
| Author: | Turez | | Posted: | Sep 15, 2019 15:13 | | Subject: | Re: Inventory Change Request for Set 702-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| | Please make changes to the following inventory:
* Delete 1 Part 2913 Blue Electric, Train Track Contact Base with Wire (97 cm)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Add 4 Part wheel2ac01 Red Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim)
* Change {2 to 1} Part Blue bb0236ac01 Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins
* Change 1 Part Blue 2913c01 Electric, Train Track Contact Base with Wire (97 cm) and Connector {Counterpart to Regular}
Comments from Submitter:
From sealed set contents, Catawiki 29351443.
Since I don't know anything about the blue 12V train era (This set is exactly twice my age! ) I hope someone else can help here:
- Should the wheels with gray rims be alternate parts?
- What is the wire with two connectors for? The photo shows it with 1x bb0236ac01 and 1x bb0093ac01, but the catalog image shows 2x bb0236ac01.
|
|
|
|
| Author: | Turez | | Posted: | Sep 15, 2019 15:10 | | Subject: | Inventory Change Request for Set 702-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2913 Blue Electric, Train Track Contact Base with Wire (97 cm)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Add 4 Part wheel2ac01 Red Train Wheel Spoked for Motor with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2a / trainrim)
* Change {2 to 1} Part Blue bb0236ac01 Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins
* Change 1 Part Blue 2913c01 Electric, Train Track Contact Base with Wire (97 cm) and Connector {Counterpart to Regular}
Comments from Submitter:
From sealed set contents, Catawiki 29351443.
Since I don't know anything about the blue 12V train era (This set is exactly twice my age! ) I hope someone else can help here:
- Should the wheels with gray rims be alternate parts?
- What is the wire with two connectors for? The photo shows it with 1x bb0236ac01 and 1x bb0093ac01, but the catalog image shows 2x bb0236ac01.
|
|
| Author: | Teup | | Posted: | Sep 15, 2019 14:24 | | Subject: | Re: Search setting: seller location filter | | Viewed: | 57 times | | Topic: | Suggestions | |
|
| In Suggestions, Nowaker writes:
| | I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
If it would make that much difference, it sounds like you are constantly searching
US only. While I get that it is useful to filter on your own country some of
the time, are you sure that you never want to order something from sellers
in other countries? From what I understood US shipping is expensive, there are
no import duties (correct me if I'm wrong), you don't have to pay VAT,
so ordering abroad can get you some pretty good deals. You might be blocking
out a huge part of Bricklink that could have just what you are looking for.
|
|
| Author: | axaday | | Posted: | Sep 15, 2019 14:03 | | Subject: | Re: Inventory Change Request for Set 5807-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 4073 Blue Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 71861 Dark Pink Belville Handle for Basket / Bucket
* Add 1 Part 48245 Dark Pink Belville Utensil Bucket Round
* Add 1 Minifig belvFair10 Belville Fairy - Pink with Stars Pattern (Alternate) (match ID 1)
* Change 1 Part {Green to Bright Green} 33051 Apple
* Change 1 Part {Green to Bright Green} 4032 Plate, Round 2 x 2 with Axle Hole
* Change 1 Part Dark Pink 70973c01 Belville Utensil Bucket Round with Same Color Belville Handle for Basket / Bucket (48245 / 71861) {Regular to Counterpart}
* Change 1 Part White {6171 Horse, Belville (Undetermined Pattern) to 6171pb07 Horse, Belville with Black Rimmed Eyes with White and Dark Orange Irises Pattern}
* Change 1 Minifig belvFair01 Belville Fairy - Pink with Moon Pattern (Millimy) {match ID 0 to 1}
|
|
|
|
|
| Author: | axaday | | Posted: | Sep 15, 2019 14:02 | | Subject: | Re: Inventory Change Request for Set 5807-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 4073 Blue Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 71861 Dark Pink Belville Handle for Basket / Bucket
* Add 1 Part 48245 Dark Pink Belville Utensil Bucket Round
* Add 1 Minifig belvFair10 Belville Fairy - Pink with Stars Pattern (Alternate) (match ID 1)
* Change 1 Part {Green to Bright Green} 33051 Apple
* Change 1 Part {Green to Bright Green} 4032 Plate, Round 2 x 2 with Axle Hole
* Change 1 Part Dark Pink 70973c01 Belville Utensil Bucket Round with Same Color Belville Handle for Basket / Bucket (48245 / 71861) {Regular to Counterpart}
* Change 1 Part White {6171 Horse, Belville (Undetermined Pattern) to 6171pb07 Horse, Belville with Black Rimmed Eyes with White and Dark Orange Irises Pattern}
* Change 1 Minifig belvFair01 Belville Fairy - Pink with Moon Pattern (Millimy) {match ID 0 to 1}
|
|
|
|
| Author: | axaday | | Posted: | Sep 15, 2019 14:02 | | Subject: | Inventory Change Request for Set 5807-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Blue Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 71861 Dark Pink Belville Handle for Basket / Bucket
* Add 1 Part 48245 Dark Pink Belville Utensil Bucket Round
* Add 1 Minifig belvFair10 Belville Fairy - Pink with Stars Pattern (Alternate) (match ID 1)
* Change 1 Part {Green to Bright Green} 33051 Apple
* Change 1 Part {Green to Bright Green} 4032 Plate, Round 2 x 2 with Axle Hole
* Change 1 Part Dark Pink 70973c01 Belville Utensil Bucket Round with Same Color Belville Handle for Basket / Bucket (48245 / 71861) {Regular to Counterpart}
* Change 1 Part White {6171 Horse, Belville (Undetermined Pattern) to 6171pb07 Horse, Belville with Black Rimmed Eyes with White and Dark Orange Irises Pattern}
* Change 1 Minifig belvFair01 Belville Fairy - Pink with Moon Pattern (Millimy) {match ID 0 to 1}
|
|
| Author: | calsbricks | | Posted: | Sep 15, 2019 10:19 | | Subject: | Re: Search setting: seller location filter | | Viewed: | 32 times | | Topic: | Suggestions | |
|
| In Suggestions, Brickman4you writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, Nowaker writes:
| | I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
Capability already exists
https://www.bricklink.com/searchAdvanced.asp
|
How to save these check boxes so they default? That is how I understood the
question.
|
You are right - missed that. Ignore my response.
|
|
| Author: | axaday | | Posted: | Sep 15, 2019 10:14 | | Subject: | Re: Belville Fairy - new color or change of color | | Viewed: | 30 times | | Topic: | Catalog | |
|
| In Catalog, Juster_Bricks writes:
I found your fairy in 5807.
|
|
| Author: | Brickman4you | | Posted: | Sep 15, 2019 09:04 | | Subject: | Re: Search setting: seller location filter | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, calsbricks writes:
| | In Suggestions, Nowaker writes:
| | I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
Capability already exists
https://www.bricklink.com/searchAdvanced.asp
|
How to save these check boxes so they default? That is how I understood the
question.
|
|
|
| Author: | stergann | | Posted: | Sep 15, 2019 08:26 | | Subject: | Inventory Change Request for Set 70638-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 64225pb032L Bright Light Orange Wedge 4 x 3 No Studs with Red Flame and Black Asian Character on Bright Light Orange Background Pattern Model Left Side (Sticker) - Set 70638 (Counterpart)
|
|
| Author: | stergann | | Posted: | Sep 15, 2019 07:08 | | Subject: | Inventory Change Request for Set 76049-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 41767pb06 White Wedge 4 x 2 Right with Red 'AV-12112' Pattern (Sticker) - Set 76049 (Counterpart)
* Add 1 Part 41768pb06 White Wedge 4 x 2 Left with Red 'AV-12112' Pattern (Sticker) - Set 76049 (Counterpart)
|
|
| Author: | normann1974 | | Posted: | Sep 15, 2019 06:54 | | Subject: | Re: Inventory Change Request for Set 8397-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 1 Part 6126b Trans-Orange Wave Rounded with Base Rim (Castle Dragon Flame, Seaweed, Water) (Alternate) (match ID 1)
* Change 1 Part Trans-Orange 6126 Wave Rounded with Base Pins (Castle Dragon Flame, Seaweed, Water) {match ID 0 to 1}
Comments from Submitter:
I just parted out this set and found this variant.
|
|
|
|
| Author: | normann1974 | | Posted: | Sep 15, 2019 06:45 | | Subject: | Inventory Change Request for Set 8397-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6126b Trans-Orange Wave Rounded with Base Rim (Castle Dragon Flame, Seaweed, Water) (Alternate) (match ID 1)
* Change 1 Part Trans-Orange 6126 Wave Rounded with Base Pins (Castle Dragon Flame, Seaweed, Water) {match ID 0 to 1}
Comments from Submitter:
I just parted out this set and found this variant.
|
|
| Author: | FreeStorm | | Posted: | Sep 15, 2019 04:50 | | Subject: | Re: Inventory Change Request for Set 9008-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| | Please make changes to the following inventory:
* Change 1 Part {Yellow to Red} {x1316c01 Duplo Rattle Rocking Bottom with Red/Blue Wheels to x1316c02 Duplo Rattle Rocking Bottom with Yellow/Blue Wheels}
Comments from Submitter:
Explanation on the next message
|
I do not have a good evidence, but something look wrong for me on this set inventory.
You can see on the attached picture a red part that is partially hidden.
(I know set picture from catalog are not a good prove, but it's the only
picture that we can found)
The two others sets with horse have part
Maybe someone who own this set can confirm or reject this inventory change.
-Fred
|
|
|
| Author: | FreeStorm | | Posted: | Sep 15, 2019 04:43 | | Subject: | Inventory Change Request for Set 9008-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Yellow to Red} {x1316c01 Duplo Rattle Rocking Bottom with Red/Blue Wheels to x1316c02 Duplo Rattle Rocking Bottom with Yellow/Blue Wheels}
Comments from Submitter:
Explanation on the next message
|
|
| Author: | calsbricks | | Posted: | Sep 15, 2019 04:15 | | Subject: | Re: Search setting: seller location filter | | Viewed: | 41 times | | Topic: | Suggestions | |
|
| In Suggestions, Nowaker writes:
| | I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
Capability already exists
https://www.bricklink.com/searchAdvanced.asp
|
|
| Author: | stergann | | Posted: | Sep 15, 2019 04:02 | | Subject: | Inventory Change Request for Set 70134-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part spa0036 (Not Applicable) Carnivorous Plant - Set 70134 (Counterpart)
|
| Author: | FreeStorm | | Posted: | Sep 15, 2019 03:47 | | Subject: | Inventory Change Request for Set 2056-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x77b White String, Cord Thick (Undetermined Length)
Comments from Submitter:
You can see the string on original Box
|
|
| Author: | Nowaker | | Posted: | Sep 14, 2019 22:20 | | Subject: | Search setting: seller location filter | | Viewed: | 90 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
|
| Author: | stergann | | Posted: | Sep 14, 2019 16:49 | | Subject: | Inventory Change Request for Set 76067-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 14769pb288 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Yellow Loop Arrows Pattern (Sticker) - Set 76067 (Counterpart)
* Add 1 Part 85984pb228 Dark Bluish Gray Slope 30 1 x 2 x 2/3 with Four Light Bluish Gray Gauges and Buttons Pattern (Sticker) - Set 76067 (Counterpart)
|
| Author: | popsicle | | Posted: | Sep 14, 2019 14:05 | | Subject: | Re: 32064 variants | | Viewed: | 50 times | | Topic: | Catalog | |
|
| In Catalog, mfav writes:
The absolute best part-variation display I've seen. Beautiful!
You've got a real talent, Mark.
-Cory
|
| Author: | Soviet | | Posted: | Sep 14, 2019 13:18 | | Subject: | Re: 40243 Stairs Spiral Step variants | | Viewed: | 57 times | | Topic: | Catalog | |
|
| In Catalog, Brickitty writes:
| | Great catch!
I have a lot of these pieces, over 100, most in Light Gray from old Harry Potter
sets but also some newer ones in Dark Bluish Gray and Dark Tan. Not a single
one has the variant with the support facing toward the step. I'd assume that
one is rarer, but I'd love to see what others have to say.
|
Maybe it's worth millions D:
|
|
| Author: | Brickitty | | Posted: | Sep 14, 2019 12:37 | | Subject: | Re: 40243 Stairs Spiral Step variants | | Viewed: | 44 times | | Topic: | Catalog | |
|
| Great catch!
I have a lot of these pieces, over 100, most in Light Gray from old Harry Potter
sets but also some newer ones in Dark Bluish Gray and Dark Tan. Not a single
one has the variant with the support facing toward the step. I'd assume that
one is rarer, but I'd love to see what others have to say.
|
|
| Author: | paulvdb | | Posted: | Sep 14, 2019 12:36 | | Subject: | Inventory Change Request for Set 75810-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 2)
* Change 2 Part Light Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove {match ID 0 to 2}
Comments from Submitter:
My set has 44302b
|
|
| Author: | Technologicat | | Posted: | Sep 14, 2019 12:30 | | Subject: | 40243 Stairs Spiral Step variants | | Viewed: | 107 times | | Topic: | Catalog | | Status: | Open | |
|
| I noticed there are two variants of the 40243 spiral step that behave differently.
On the bottom side, there is a support ridge in the round part that may be located
(see picture):
- Facing away from the step
- Facing toward the step
Both parts have the same code, 40243.
When assembled with the 40244 support axle, with the steps fully spread out:
- The variant which has the support facing away from the step, will have
a part of each step overlapping the previous one (see second picture).
- The variant which has the support facing toward the step - as far I
can tell - will have no (or very little) overlap between adjacent steps.
See third picture, but note only the lowest 6 steps are of the second variant,
because I don't currently have a full set of 8 of them.
All of the steps pictured here are of the old light gray color.
So, does anyone happen to know if particular sets come with a particular variant,
or if it's just random?
|
|
|
| Author: | HallBricks | | Posted: | Sep 14, 2019 08:36 | | Subject: | Re: Change time zone | | Viewed: | 65 times | | Topic: | Suggestions | |
|
| In Suggestions, hpoort writes:
Yeah, it might be quite complicated the very first time it's dealt with.
I'm not a programmer so I don't really know, but I that this problem
has been solved on many, many, other websites and I'm sure it could be implemented
on BrickLink as well.
|
| Author: | Turez | | Posted: | Sep 14, 2019 08:08 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 63 times | | Topic: | Catalog | |
|
| | Congratulations Paul and good luck with your new appointment! |
| Author: | paulvdb | | Posted: | Sep 14, 2019 06:44 | | Subject: | Inventory Change Request for Set 75810-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2436c Medium Dark Flesh Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 2)
* Change 2 Part Medium Dark Flesh 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}
Comments from Submitter:
My set has 2436c
|
|
| Author: | EnchantedBricks | | Posted: | Sep 13, 2019 22:38 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 62 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
I know I am pretty new here, and I don't know a lot of the stories of the
"Good Ole Days" and I may not be a very large store.. YET, But for what its
worth Congrats !!
|
|
| Author: | axaday | | Posted: | Sep 13, 2019 21:20 | | Subject: | Re: Inventory Change Request for Set 3243-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Change 1 Part Red {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
This one is really probably pretty obvious, but I do have a pic anyway.
|
|
|
|
| Author: | axaday | | Posted: | Sep 13, 2019 21:20 | | Subject: | Inventory Change Request for Set 3243-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Red {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
This one is really probably pretty obvious, but I do have a pic anyway.
|
|
| Author: | SezaR | | Posted: | Sep 13, 2019 21:09 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 60 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congratulations Paul!
|
|
| Author: | ElvisandBane | | Posted: | Sep 13, 2019 20:15 | | Subject: | Inventory Change Request for Set 41313-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6179pb164 Dark Pink Tile, Modified 4 x 4 with Studs on Edge with Beach Ball and Water Slide Pattern (Sticker) - Set 41313 (Counterpart)
|
|
| Author: | axaday | | Posted: | Sep 13, 2019 19:11 | | Subject: | Re: Inventory Change Request for Set 3152-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Delete 4 Part 4624 Red Wheel 8mm D. x 6mm
* Delete 4 Part 3139 White Tire 14mm D. x 4mm Smooth Small Single
* Change 4 Part Red 4624c04 Wheel 8mm D. x 6mm with White Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
Comments from Submitter:
Sealed set
|
|
|
|
| Author: | axaday | | Posted: | Sep 13, 2019 19:10 | | Subject: | Inventory Change Request for Set 3152-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 4624 Red Wheel 8mm D. x 6mm
* Delete 4 Part 3139 White Tire 14mm D. x 4mm Smooth Small Single
* Change 4 Part Red 4624c04 Wheel 8mm D. x 6mm with White Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
Comments from Submitter:
Sealed set
|
|
| Author: | BricksThatStick | | Posted: | Sep 13, 2019 15:28 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 85 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Thanks everyone for the kind words
|
|
| Author: | Adjour | | Posted: | Sep 13, 2019 14:52 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 58 times | | Topic: | Catalog | |
|
| | Impressive contributions, welcome (back?) ! |
|
| Author: | popsicle | | Posted: | Sep 13, 2019 14:51 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 63 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
|
Welcome back, Paul.
And thank you. If you need any consideration from our store please let me know.
It would make me happy to be able to pay-it-back, what you and the others contribute.
-Cory
|
|
| Author: | Adjour | | Posted: | Sep 13, 2019 14:51 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 75 times | | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| | In Catalog, crazylegoman writes:
Really? What a keyboard warrior you are.
|
Ironically, I've always seen that part for sale and wondered for long periods
of time what it would be good for.
|
| Author: | randyf | | Posted: | Sep 13, 2019 14:45 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 75 times | | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
Really? What a keyboard warrior you are.
|
|
| Author: | axaday | | Posted: | Sep 13, 2019 14:45 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 55 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Welcome back, Paul #2. Thank you for helping Dan and thank you for helping Dan's
legacy. I never knew him at all, but the thing he made is a good thing and it
needs care. I'll be seeing you around.
|
|
| Author: | Admin_Russell | | Posted: | Sep 13, 2019 14:33 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 99 times | | Topic: | Catalog | |
|
|
BrickLink
ID CardAdmin_Russell
|
Location:  USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
 |
Admin |
|
|
| BrickLink Administrator |
|
| In Catalog, jennnifer writes:
| | In Catalog, Admin_Russell writes:
| |
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
Jen
|
This thread was supposed to be a joyful welcome for a new team member. I'm
sorry if it was offensive to anyone and I don't want to argue a point.
I will leave this thread as it is for now. But if people keep commenting on this
issue, I will be forced to lock it.
|
|
| Author: | axaday | | Posted: | Sep 13, 2019 14:23 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 67 times | | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
Are you serious?
|
|
| Author: | popsicle | | Posted: | Sep 13, 2019 14:17 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 104 times | | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| | In Catalog, Admin_Russell writes:
| |
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
|
I think you make a valid point, I felt so when I first read Russell’s statement
yesterday. But if you’ll allow me just a moment of open mindedness to express
how I reasoned through that portion or Russell’s post…
Simply put, the 'attitude' Russell speaks of, and what you've taken
umbrage with, is for lack of a better term, site first. That is the idea
of BL, not any given people of it - at any given time. Yes, it’s a for-profit
venture, but it’s inception and all important developmental years, were steeped
in the idea of a site that is community for AFOL, according to what is now doctrine
but simply was what Daniel expressed.
I think Russell (understanding he’s partially responsible for the current direction
of BL) to use a metaphor, is attempting to correct course of the ship we all
have boarded
You were as dedicated a BL Inventories Admin as any, I thought. We never met,
but I think I remember you from the Seattle Round Table, sitting across from
my son and I. You’ve given a lot of yourself to the site and should be shown
appreciation, along with the several others that have given selflessly to better
our catalog, including the many non-admin contributors. Catalog is what makes
this site, IMHO.
All that being said, I understand Russell’s statement.
As to your statement "how they were treated by the management and members
of this site" you're no longer an admin, express yourself! I don't believe
unpaid positions are subject to the same enforceability of non-discloser agreements,
if any  If you want people to understand the concern that you've taken
the time to post, you'll need to add more context.
Forum participants are less than a percent of the overall site membership, but
the percentage of those that read the forum is far greater.
Take your time, but tell your story, Jen. That is, if you haven't already
somewhere here in the forum.
-Cory
|
|
| Author: | superchicken77 | | Posted: | Sep 13, 2019 14:13 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 61 times | | Topic: | Catalog | |
|
| I thought the same thing.
In Catalog, jennnifer writes:
| | In Catalog, Admin_Russell writes:
| |
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
Jen
|
|
|
| Author: | Soviet | | Posted: | Sep 13, 2019 13:56 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 67 times | | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
I see what you did there
|
| Author: | crazylegoman | | Posted: | Sep 13, 2019 13:53 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 105 times | | Topic: | Catalog | |
|
| |
| Author: | samsam2 | | Posted: | Sep 13, 2019 12:45 | | Subject: | Inventory Change Request for Set 7477-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6573pb001L Dark Bluish Gray Technic, Gear Differential, 24-16 Teeth with Lime Containers Pattern Model Left Side (Sticker) - Set 7477 (Counterpart)
|
|
| Author: | kaiser1401 | | Posted: | Sep 13, 2019 10:20 | | Subject: | Stud.io feature: background image or sketch | | Viewed: | 51 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| First: Is this the right part of the forum to suggest features for stud.io? Where
else can I contact developers file bugs, propose features etc?
I think it would be nice to be able to import a sketch, drawing, photo as a background
plane (either xy-plane, one of the three or freely positioned) and scale it to
your needs. I think this would help me designing models way more easily if I
can base it on a drawing, blueprint, etc.
Any opinions on that?
-Kaiser
|
|
| Author: | VOTB | | Posted: | Sep 13, 2019 10:10 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 74 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Thanks for the announcement! And I am greatful for everyone's hard work!
|
|
| Author: | jennnifer | | Posted: | Sep 13, 2019 09:33 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 151 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| |
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
Jen
|
|
| Author: | paulvdb | | Posted: | Sep 13, 2019 05:12 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 61 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congrats and welcome.
|
|
| Author: | Rob_and_Shelagh | | Posted: | Sep 13, 2019 03:51 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 44 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Excellent news, excellent choice!
Thanks for taking this role Paul
Robert
|
|
| Author: | Brickwilbo | | Posted: | Sep 13, 2019 03:35 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 50 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congratulations.
|
|
| Author: | Soviet | | Posted: | Sep 13, 2019 03:30 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 50 times | | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| | Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congratulations kind sir.
|
|
| Author: | Admin_Russell | | Posted: | Sep 13, 2019 01:14 | | Subject: | We have a new Catalog Associate! | | Viewed: | 338 times | | Topic: | Catalog | | Status: | Open | |
|
|
BrickLink
ID CardAdmin_Russell
|
| Location: USA, California |
| Member Since |
Contact |
Type |
Status |
| May 9, 2017 |
|
Admin |
|
|
| BrickLink Administrator |
|
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
|
| Author: | BricksShop | | Posted: | Sep 13, 2019 00:01 | | Subject: | Inventory Change Request for Set 7879-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 86059 Dark Bluish Gray Rein with Bridle Flexible
* Add 1 Part 86058 Tan Tauntaun / Wampa Horn Right
* Add 1 Part 86057 Tan Tauntaun / Wampa Horn Left
* Add 1 Part 86056 Light Bluish Gray Tauntaun Arm Right
* Add 1 Part 86055 Light Bluish Gray Tauntaun Arm Left
* Add 1 Part 64800pb01c01 Light Bluish Gray Tauntaun Body with Legs and Eyes Pattern
* Change 1 Part Light Bluish Gray 64800pb01c02 Tauntaun, Star Wars with Rigid Tail {Regular to Counterpart}
Comments from Submitter:
Tauntaun is provided in single parts according parts list in instruction
|
|
| Author: | Teup | | Posted: | Sep 12, 2019 20:15 | | Subject: | Re: Change time zone | | Viewed: | 46 times | | Topic: | Suggestions | |
|
| In Suggestions, SylvainLS writes:
| | In Suggestions, hpoort writes:
| | In Suggestions, HallBricks writes:
| | It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
Have you ever thought about it's complexity?
|
Very simple: everything is stored in UTC and presented in a local/chosen TZ.
The UTC → local TZ conversion is done with a standard, well tested library.
There. The complexity is outsourced.
Besides, it’s just about presentation. Official times are those in the database,
on the server, in UTC.
I stopped watching after he began talking about DST (“autumn in England”).
And that’s absurd. He talks about a programmer who:
1. doesn’t know what TZs are,
2. adds cases one by one instead of, finally, learning what’s it about,
3. and thus reinvents the wheel, spoke by spoke.
Yes, timezones are complex (and involve politics, therefore also totally insane)
and that’s why you don’t cobble up something in your garage.
Yes, timezones change frequently (remember, politics), but you just update the
TZ data the library uses.
One could do the same kind of video about 3D geometry or any other complex or
complicated but already well known feature.
Just showing a given UTC time in a chosen TZ should be easy peasy.
|
I thought it would be a sarcastic video. As you say, there's really no need
to reinvent the wheel, this has been done so many times over there must be plenty
of resources you can use very easily.
BrickOwl has timezones, other market platforms have timezones, forums have timezones,
social media have timezones.. and it all works without issues. Bricklink is really
the odd one out.
|
|
| Author: | SylvainLS | | Posted: | Sep 12, 2019 19:26 | | Subject: | Re: Change time zone | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, hpoort writes:
| | In Suggestions, HallBricks writes:
| | It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
Have you ever thought about it's complexity?
|
Very simple: everything is stored in UTC and presented in a local/chosen TZ.
The UTC → local TZ conversion is done with a standard, well tested library.
There. The complexity is outsourced.
Besides, it’s just about presentation. Official times are those in the database,
on the server, in UTC.
I stopped watching after he began talking about DST (“autumn in England”).
And that’s absurd. He talks about a programmer who:
1. doesn’t know what TZs are,
2. adds cases one by one instead of, finally, learning what’s it about,
3. and thus reinvents the wheel, spoke by spoke.
Yes, timezones are complex (and involve politics, therefore also totally insane)
and that’s why you don’t cobble up something in your garage.
Yes, timezones change frequently (remember, politics), but you just update the
TZ data the library uses.
One could do the same kind of video about 3D geometry or any other complex or
complicated but already well known feature.
Just showing a given UTC time in a chosen TZ should be easy peasy.
|
|
| Author: | JerseyGirl689 | | Posted: | Sep 12, 2019 16:57 | | Subject: | Re: Change NPB Timeline | | Viewed: | 51 times | | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| | In Suggestions, JerseyGirl689 writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I completely agree, 7 days to open, 3 days to close, with or without a response.
If they have time to respond they can use that time to pay. If they can't
afford to pay, they shouldn't have made the purchase to start with.
Also, to those sellers who simply cancel and move on, you're leaving yourself
open to a retaliatory negative FB and enabling a NPB to continue doing the same
thing to other sellers. I have inventory held hostage right now for a NPB, despite
the fact his FB clearly shows this is a habit. If those sellers had used the
NPB process, as they should have, he would have been suspended and my inventory
would be free right now.
Darcy
|
Yes they can leave a neg, but 90% of the time it a a zero feedback buyer doing
this. When they get the negative back from the seller they will find themselves
at -1 and find it much more difficult to buy from anyone.
|
Yes 90% of the time it is zero or low FB buyers, but that really doesn't
matter, it's still an undeserved blemish on your record. This is strangers
dealing with strangers, IMHO your reputation is just as important as your customer
service and parts quality.
| |
And I do agree that I am making the problem worse by not following the process,
but the process just plain sucks and I'm not wasting my time dealing with
it.
|
You're right, the NPB process sucks, but it's all we have right now,
so we have to deal with it. Otherwise NPB's are going to continue wasting
our time and tying up our inventory for nothing.
| |
I wish I could figure out the instant payment for the single boxed sets I sell.
I know exactly how much they will weigh and how big the shipping box is for each
sealed set I have. But I am just too stupid to figure it out. I really wish it
would just calculate it for me like ebay does. I'm considering actually just
offering free shipping and having instant payment but I would be buried so far
in the listings I would never be seen.
|
As for IC, haven't even tried so IDK. I pull and recheck every part, weigh
and manually send invoices. I want to know everything is perfect and correct
before invoicing and shipping. Actually if they implement their proposed changes
it seems we'll be forced to use IC, which is why I've started exploring
other options. It sucks, I've been here a long time and really like it,
but if or when they do force it on us I'll be closing my store and moving
on. This nonsense of if they payed too much you have to refund, if they paid
too little you have to eat it, doesn't work for me.
Darcy
|
|
| Author: | hpoort | | Posted: | Sep 12, 2019 16:36 | | Subject: | Re: Change time zone | | Viewed: | 44 times | | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| | It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
Have you ever thought about it's complexity? See Tom Scott's YouTube
episode about implementing time zones in programming:
https://www.youtube.com/watch?v=-5wpm-gesOY
Hans-Peter
|
|
| Author: | popsicle | | Posted: | Sep 12, 2019 15:09 | | Subject: | Re: Change time zone | | Viewed: | 45 times | | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| | It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
You no doubt know of Greenwich mean time, now you get to participate in BL time!
Vad klagar du på?
You're part of a few!
-Cory
|
|
| Author: | mscheaf | | Posted: | Sep 12, 2019 14:31 | | Subject: | Re: Change NPB Timeline | | Viewed: | 39 times | | Topic: | Suggestions | |
|
| In Suggestions, JerseyGirl689 writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I completely agree, 7 days to open, 3 days to close, with or without a response.
If they have time to respond they can use that time to pay. If they can't
afford to pay, they shouldn't have made the purchase to start with.
Also, to those sellers who simply cancel and move on, you're leaving yourself
open to a retaliatory negative FB and enabling a NPB to continue doing the same
thing to other sellers. I have inventory held hostage right now for a NPB, despite
the fact his FB clearly shows this is a habit. If those sellers had used the
NPB process, as they should have, he would have been suspended and my inventory
would be free right now.
Darcy
|
Yes they can leave a neg, but 90% of the time it a a zero feedback buyer doing
this. When they get the negative back from the seller they will find themselves
at -1 and find it much more difficult to buy from anyone.
And I do agree that I am making the problem worse by not following the process,
but the process just plain sucks and I'm not wasting my time dealing with
it.
I wish I could figure out the instant payment for the single boxed sets I sell.
I know exactly how much they will weigh and how big the shipping box is for each
sealed set I have. But I am just too stupid to figure it out. I really wish it
would just calculate it for me like ebay does. I'm considering actually just
offering free shipping and having instant payment but I would be buried so far
in the listings I would never be seen.
|
|
| Author: | mscheaf | | Posted: | Sep 12, 2019 14:23 | | Subject: | Re: Change NPB Timeline | | Viewed: | 43 times | | Topic: | Suggestions | |
|
| In Suggestions, bje writes:
| | In Suggestions, mscheaf writes:
| | In Suggestions, bje writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, mscheaf writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
As a buyer you can file a paypal claim or a chargeback with your bank. Sellers
have no options except the npb system
|
?? If the seller has not invoiced, how do I have a claim? Because of exchange
controls I've had cancellations cost me 26% of the order value after three
weeks, with still no invoice from the seller concerned and no way to cancel and
move on except to wait it out.
Bear in mind also, BL is a contracts based systems, so even if a seller invoice
on day 20, he can still start an NPB after 7 days, irrespective of the time he
took to invoice or even if the buyer's circumstances have changed. Imagine
a wait of two weeks for an international order and exchange rate drop of 10%,
making the order 10% plus rate pips more expensive for the buyer. These are not
the most extreme examples.
Sellers also can cancel irrespective, buyers have to request a cancellation as
a favour from a seller who is not responding, go figure.
|
????If you haven't paid how is your money tied up for weeks?????????
|
|
| Author: | calsbricks | | Posted: | Sep 12, 2019 13:49 | | Subject: | Re: Change NPB Timeline | | Viewed: | 34 times | | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| | | | Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
That is probably why they will never do anything about it - it is another push
for non-IC adopters to adopt IC.
|
Sorry 1 more thing coming from someone who has spent a great many years in the
software development world. Software is normally designed to suit end users and
it is normally designed and developed in conjunction with them. That hasn't
happened here at Bricklink, On the other hand gaming software often comes from
the developers themselves rather than the end user - and quite often that works.
But when it comes to serious applications it never does unless the developers
have a rock solid systems spec which has been put together by a quality experienced
systems analyst - again doesn't happen here or at least it does not appear
so. When was the first, or last time as a seller or buyer you were asked what
you wanted to see in the software?
|
|
| Author: | calsbricks | | Posted: | Sep 12, 2019 13:39 | | Subject: | Re: Change NPB Timeline | | Viewed: | 36 times | | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| | | | Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
That is probably why they will never do anything about it - it is another push
for non-IC adopters to adopt IC.
|
There is a simple answer to that - make it applicable for all regions - redesign
it so those of us who use multiple boxes (3 large letter styles, and 11 small
parcel styles) do not have to set up a delivery method for each of those across
all boxes. 14 first class; 14 first class confirmed; 14 2nd class confirmed;
14 next day delivery; 14 air mail; 14 air mail confirmed. Good grief - all day
every day just setting up delivery methods and the design of that is totally
flawed - IC should have been regionalised to accommodate not just weight systems
but weight and volume systems. Yes I know we could try and reduce boxes but that
is not convenient for us nor our customers. We don't send out half full boxes.
In addition if the design had been better it would have allowed them to make
the simple changes to accommodate the changes in the US postal system where everything
is being done by workaround.
Forcing people to use a feature is a non-starter - usage should be up to the
individual not a method which doesn't work 100% of the time and also has
over 40,000 items in its catalogue without dimensions. but you are probably right
- yet another wonderful idea just like pp for marketplaces, dropping paypal offsite
- again to force IC. NO matter what the take-up is in real terms the feature
needs re-thinking.
What next force members to use their new Order detail page ; or their new My
BL page -- you must now use Stud.io to design anything. Oh and lest we forget
you must use the new wanted list (but after clamour we will leave the classic
one available, and we will reinstate paypal offsite).
|
|
| Author: | yorbrick | | Posted: | Sep 12, 2019 13:17 | | Subject: | Re: Change NPB Timeline | | Viewed: | 31 times | | Topic: | Suggestions | |
|
| | | Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
That is probably why they will never do anything about it - it is another push
for non-IC adopters to adopt IC.
|
|
| Author: | JerseyGirl689 | | Posted: | Sep 12, 2019 13:16 | | Subject: | Re: Change NPB Timeline | | Viewed: | 32 times | | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I completely agree, 7 days to open, 3 days to close, with or without a response.
If they have time to respond they can use that time to pay. If they can't
afford to pay, they shouldn't have made the purchase to start with.
Also, to those sellers who simply cancel and move on, you're leaving yourself
open to a retaliatory negative FB and enabling a NPB to continue doing the same
thing to other sellers. I have inventory held hostage right now for a NPB, despite
the fact his FB clearly shows this is a habit. If those sellers had used the
NPB process, as they should have, he would have been suspended and my inventory
would be free right now.
Darcy
|
|
| Author: | Teup | | Posted: | Sep 12, 2019 12:52 | | Subject: | Re: Change NPB Timeline | | Viewed: | 30 times | | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| | In Suggestions, Teup writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I don't know about other countries but over here 14 days is a widely accepted
standard term for invoices to be paid. Sometimes it's longer, but it's
never less than 14 days. I wouldn't find it professional if a company gave
me an invoice that had to be paid in less than 14 days.
Also, inventory moves slowly and parts typically take over a year to sell. I
don't see how a few extra days for a fraction of the inventory are so important.
Bricklink downtime should be a way bigger concern.
|
In USA bills due upon receipt are quite common, especially for medical bills.
Also, I often get bills in the mail for various things that are due in less than
2 weeks. Again, if you can't afford it, don't buy it. This isn't
water or medicine or food. It's a freaking luxury item toy.
|
Maybe it's a cultural difference. If the code of conduct is different in
the US, then I do understand you'd expect Bricklink to match with that.
As for freaking luxury toys, today I got an invoice from Lego.com in the mail
that is due in 18 days. That's pretty usual to me. I wouldn't want to
seem less professional than Lego.com. An invoice with a number below 14 days
would feel pushy to me based on what I am used to.
Anyway I do question how big a deal it is. Customer service costs money. And
of all aspects of customer service, patience is pretty much the cheapest one.
The average value of a Bricklink order is approximately $20. Let's say you
are always having one NPB going on constantly all throughout your Bricklink career.
I would say: Spend $10 (part selling value: $20) one time on a set, and call
it the NPB buffer. That compensates the $20 worth of inventory that is constantly
being blocked by NPBs. Maybe I'm too clinical and calculating but as far
as I can see that solves the problem
|
|
|
| Author: | bje | | Posted: | Sep 12, 2019 12:00 | | Subject: | Re: Change NPB Timeline | | Viewed: | 43 times | | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| | In Suggestions, bje writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, mscheaf writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
As a buyer you can file a paypal claim or a chargeback with your bank. Sellers
have no options except the npb system
|
?? If the seller has not invoiced, how do I have a claim? Because of exchange
controls I've had cancellations cost me 26% of the order value after three
weeks, with still no invoice from the seller concerned and no way to cancel and
move on except to wait it out.
Bear in mind also, BL is a contracts based systems, so even if a seller invoice
on day 20, he can still start an NPB after 7 days, irrespective of the time he
took to invoice or even if the buyer's circumstances have changed. Imagine
a wait of two weeks for an international order and exchange rate drop of 10%,
making the order 10% plus rate pips more expensive for the buyer. These are not
the most extreme examples.
Sellers also can cancel irrespective, buyers have to request a cancellation as
a favour from a seller who is not responding, go figure.
|
|
| Author: | mscheaf | | Posted: | Sep 12, 2019 11:53 | | Subject: | Re: Change NPB Timeline | | Viewed: | 33 times | | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I don't know about other countries but over here 14 days is a widely accepted
standard term for invoices to be paid. Sometimes it's longer, but it's
never less than 14 days. I wouldn't find it professional if a company gave
me an invoice that had to be paid in less than 14 days.
Also, inventory moves slowly and parts typically take over a year to sell. I
don't see how a few extra days for a fraction of the inventory are so important.
Bricklink downtime should be a way bigger concern.
|
In USA bills due upon receipt are quite common, especially for medical bills.
Also, I often get bills in the mail for various things that are due in less than
2 weeks. Again, if you can't afford it, don't buy it. This isn't
water or medicine or food. It's a freaking luxury item toy.
|
|
| Author: | mscheaf | | Posted: | Sep 12, 2019 11:50 | | Subject: | Re: Change NPB Timeline | | Viewed: | 28 times | | Topic: | Suggestions | |
|
| In Suggestions, bje writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, mscheaf writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
As a buyer you can file a paypal claim or a chargeback with your bank. Sellers
have no options except the npb system
|
|
| Author: | bje | | Posted: | Sep 12, 2019 11:37 | | Subject: | Re: Change NPB Timeline | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, calsbricks writes:
| | In Suggestions, mscheaf writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
|
| Author: | Turez | | Posted: | Sep 12, 2019 11:36 | | Subject: | Re: Inventory Change Request for Set 6273-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| Hello,
sorry for my late reply.
In Inventories Requests, neoleg writes:
| | I own the entire collection for Pirates I up until 1991 and I got them right
when they came out (all new from sealed boxes). All treasure chests are there
and none of them is the A-type, all are the old B-Type (including set 6260 from
1989).
|
| | So I guess there really must be alternates for all of these sets.
|
All other sets from 1989-1991 already have 4738b in their inventories. 6273 is
the first set which has 4738a as regular part. But thanks to your request, we
now know that some (most likely the very early) copies of 6273 still came with
4738b. So you can submit a new request:
- Add 4738b as regular item
- Move 4738a to alternate
- Add the next unused Match ID to both entries
If you have time and want to help a little bit more, it would be great if you
could check your pirates sets for undetermined parts or other part variants.
For example, the boat mast parts in 6274 or the palm trunks in a few sets are
still undetermined.
| | The picture on the box also shows the B-type (see attachment).
|
Box photos are usually not a good source for information about part variants.
They are produced weeks or months before set production starts and may show variants
which are never included in any copy of the set.
Regards,
Jonas
|
|
| Author: | Teup | | Posted: | Sep 12, 2019 11:26 | | Subject: | Re: Change NPB Timeline | | Viewed: | 31 times | | Topic: | Suggestions | |
|
| In Suggestions, manganschlamm writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
OK then in return I propose that we buyers can initiate and complete NRS and
NSS after proportionally shorter time. If sellers want to give us buyers less
time to make the payment, then they should also have less time to issue invoices
and ship. Something for something. As a side note, I would like to mention that
in Europe many payments are still made by conventional bank transfer, which may
take few days to complete (and will only be processed on business days).
Final comment: Sellers that want to push for high-speed payment should accept
the fact that for 99% of buyers this is a hobby whereas for a considerable fraction
of sellers it is a full- or part-time business. We buyers typically have a normal
job and need to find the time to do things related to BL.
|
+1
14 days is the basic level of customer service. And if nothing is defined in
the terms, the legal term is even 30 days.
14 days is also the legal amount of time a buyer has to change their mind about
an order and return it. It wouldn't make much sense to me to on the one hand
force a buyer to pay quicker than 14 days when after that they still have a couple
of days they can get their money back.
|
|
| Author: | Teup | | Posted: | Sep 12, 2019 11:21 | | Subject: | Re: Change NPB Timeline | | Viewed: | 41 times | | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I don't know about other countries but over here 14 days is a widely accepted
standard term for invoices to be paid. Sometimes it's longer, but it's
never less than 14 days. I wouldn't find it professional if a company gave
me an invoice that had to be paid in less than 14 days.
Also, inventory moves slowly and parts typically take over a year to sell. I
don't see how a few extra days for a fraction of the inventory are so important.
Bricklink downtime should be a way bigger concern.
|
|
| Author: | OurBricks | | Posted: | Sep 12, 2019 11:20 | | Subject: | Re: Remark in PartOut | | Viewed: | 27 times | | Topic: | Suggestions | |
|
| Have you taken a look at the Brick Seller store management online app?
It has some nice part out features. It will even recommend a storage location
(in the remarks field) for items you already have in your inventory.
You can find a link to it on the BrickLink Links page here: https://www.bricklink.com/links.asp?catID=9
In Suggestions, BrickTobi writes:
| | At the moment I have to search very time-consuming for the remarks when distributing
new parts, which are already in my invetory. Currently I always have to jump
into the inventory and take over the remark.
My suggestion would be to transfer the existing remarks already into the corresponding
fields. This function can also be optional (only if I want to transfer the old
remarks).
I would be very happy about this function.
Thanks and greetings
|
|
|
| Author: | Teup | | Posted: | Sep 12, 2019 11:16 | | Subject: | Re: Change time zone | | Viewed: | 42 times | | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| | It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
...and actually know when stuff happened on Bricklink? Like knowing when messages
between buyers and sellers were sent, or when an order status changed?! No
way, don't mess with cultural heritage! The internet's last forum without
timezones. It's like living in history! (also because, well, the time stamps
always indicate an earlier time than it is here) 
|
|
| Author: | calsbricks | | Posted: | Sep 12, 2019 10:58 | | Subject: | Re: Change NPB Timeline | | Viewed: | 39 times | | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| | In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
|
| Author: | mscheaf | | Posted: | Sep 12, 2019 10:56 | | Subject: | Re: Change NPB Timeline | | Viewed: | 34 times | | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| | Could you imagine
how frustrating it would be if you went on Amazon or Walmart to buy something
and were restricted in anyway?
|
You mean like when I go to Amazon and the products I want to buy are for Prime
members only. Not the sale price, mind you, the actual item. If you aren't
in prime you can't buy it for any price. Yeah it sucks bad and is one of
the reasons why Amazon is always the last place I check now after exhausting
literally all other options.
|
|
| Author: | calsbricks | | Posted: | Sep 12, 2019 10:55 | | Subject: | Re: Change time zone | | Viewed: | 39 times | | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| | It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
It isn't and this has been around since day 1. Nothing has ever been done
about it.
|
|
| Author: | mscheaf | | Posted: | Sep 12, 2019 10:52 | | Subject: | Re: Change NPB Timeline | | Viewed: | 41 times | | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| | I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
|
| Author: | HallBricks | | Posted: | Sep 12, 2019 10:44 | | Subject: | Change time zone | | Viewed: | 95 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
|
| Author: | popsicle | | Posted: | Sep 12, 2019 09:38 | | Subject: | Re: How much does your pet mean to you? | | Viewed: | 51 times | | Topic: | Suggestions | |
|
| In Suggestions, JerseyGirl689 writes:
| | In Suggestions, popsicle writes:
| | Just had a stroke of genius (or just a stroke ) while replying to post
I would really like to see more pics of our member’s pet. What do you think about
showing or introduce your animal companion to the BL membership here on the forum?
I suggest a new forum subtopic, under Off Topic: Pets
Anecdotes and/or pics of your pets? Maybe of interrupting your lego work or other
mischief. Or just an introduction of your nonhuman companion, new or old. What
your pet did today
Even though we don't have furry companions (son's allergies) we really
enjoy animal pics and stories. Think most do, evidenced by it's popularity
on youtube.
What do think? Think there is enough interest to warrant a sub-topic in the forum?
|
|
Well done, Darcy!
We (I do) tend to forget all the ways they help us beyond just being the best,
loyal companion possible.
...and they've been carrying their own weight (in one form or another) since
they decided to throw-in with us hairless two legged types, long ago
|
|
| Author: | paulvdb | | Posted: | Sep 12, 2019 09:21 | | Subject: | Re: Inventory Change Request for Set 76086-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, Ladyhawke74 writes:
| | Please make changes to the following inventory:
* Add 2 Part 44225pb001a Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side A (Sticker) - Set 76086 (Counterpart)
* Add 2 Part 44225pb001b Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side B (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 3010pb274 Black Brick 1 x 4 with Grille and Red Headlights Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb083 Yellow Tile 1 x 3 with Red Gauges and Buttons Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb084 Yellow Tile 1 x 3 with Red Level Meter Pattern (Sticker) - Set 76086 (Counterpart)
|
Looks like the sticker is applied upside down on the image of 3010pb274.
Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched
between the two parts based on set images and instructions.
|
It also looks like technic half pins were left in the 44225 in both images.
|
I see that new images have been added to these part with stickers applied correctly.
I have accepted these request now that the images are correct.
|
|
| Author: | paulvdb | | Posted: | Sep 12, 2019 09:18 | | Subject: | Re: Inventory Change Request for Set 7823-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 2 Part 3242c Light Gray Train, Track 12V Conducting Rail Straight without Cable Connection Holes (Alternate) (match ID 2)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports (match ID 5)
* Add 3 Part 3003old Red Brick 2 x 2 without Inside Supports (match ID 4)
* Add 2 Part 3002old Red Brick 2 x 3 without Cross Supports (match ID 6)
* Change 2 Part Light Gray 3242 Train, Track 12V Conducting Rail Straight {match ID 0 to 2}
* Change 1 Part White 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 5}
* Change 3 Part Red 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 4}
* Change 2 Part Red 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 6}
Comments from Submitter:
The evidence will be uploaded soon.
|
Did you forget to upload the evidence?
|
Hi Paul,
No I didn't forget. There are so many inv. changes, catalog changes, adding
items,...that I have plans to submit, take photos, upload them to my PC, and
then, upload them on BL. The only way I can handle all these is to do them step
by step, as my time allows me.
This NIB copy that I purchased should be from 1988 since the box is the first
version (1986-8) and the straight conducting rails don't have holes and have
reinforcements under their notches (1988-90).
I have never seen light gray hinges with solid stud with this set. I even have
one used copy that I bought from the first owner and was an early release too.
The (light gray) hinges with hollow studs were produced since very early 1985
https://www.bricklink.com/messageThread.asp?ID=235359
So I think we should remove them from this set. If we find a reliable source
that they were used for this set, then they should come back, but I doubt.
The length of the wire in this set
is 76cm.
|
Sorry it took me a while to get back to this request. My own set was in a location
that was a bit inconvenient to reach. I was planning to reorganize a bit here
so was planning to use that opportunity to check my set. But it took longer than
I expected to finally get around to that.
I can confirm that my set has the 3002old and 3003old. Also the 3242c and 4081b.
I had already added 4081b in blue as alternate long ago. I guess at that time
I forgot to add it in red because someone else added it later. But my set has
4081b in both colors.
For the solid stud hinges it seems very likely that they never came in this set.
The only other sets with them in light gray are from 1983 and none of the sets
from 1985 have them in their inventories so it seems unlikely that they would
suddenly show up again in 1986. So I think they can be removed.
|
|
| Author: | BrickTobi | | Posted: | Sep 12, 2019 07:17 | | Subject: | Re: Remark in PartOut | | Viewed: | 25 times | | Topic: | Suggestions | |
|
| In Suggestions, NelisSolis writes:
| | In Suggestions, BrickTobi writes:
| | At the moment I have to search very time-consuming for the remarks when distributing
new parts, which are already in my invetory. Currently I always have to jump
into the inventory and take over the remark.
My suggestion would be to transfer the existing remarks already into the corresponding
fields. This function can also be optional (only if I want to transfer the old
remarks).
I would be very happy about this function.
Thanks and greetings
|
I think this is already available in the "consolidation" paragraph of the part-out
page.
|
Yes, but I have to write my remarks in the step before the consolidation. So
I think it would be helpful to have the remarks in this step already.
|
|
| Author: | JerseyGirl689 | | Posted: | Sep 11, 2019 23:56 | | Subject: | Re: How much does your pet mean to you? | | Viewed: | 61 times | | Topic: | Suggestions | |
|
| In Suggestions, popsicle writes:
| | Just had a stroke of genius (or just a stroke ) while replying to post
I would really like to see more pics of our member’s pet. What do you think about
showing or introduce your animal companion to the BL membership here on the forum?
I suggest a new forum subtopic, under Off Topic: Pets
Anecdotes and/or pics of your pets? Maybe of interrupting your lego work or other
mischief. Or just an introduction of your nonhuman companion, new or old. What
your pet did today
Even though we don't have furry companions (son's allergies) we really
enjoy animal pics and stories. Think most do, evidenced by it's popularity
on youtube.
What do think? Think there is enough interest to warrant a sub-topic in the forum?
|
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Canada, British Columbia
Netherlands, Overijssel
Denmark
Germany, Niedersachsen
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
United Kingdom, England
Norway, Rogaland
Switzerland, Vaud
Poland, w. Pomorskie
Finland, Pirkanmaa
)
)
)
Sweden, Västra Götaland
France, Nouvelle-Aquitaine
South Africa, Western Cape
)
)