Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | FreeStorm | Posted: | Sep 15, 2019 04:43 | Subject: | Inventory Change Request for Set 9008-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Yellow to Red} {x1316c01 Duplo Rattle Rocking Bottom with Red/Blue Wheels to x1316c02 Duplo Rattle Rocking Bottom with Yellow/Blue Wheels}
Comments from Submitter:
Explanation on the next message
|
|
Author: | calsbricks | Posted: | Sep 15, 2019 04:15 | Subject: | Re: Search setting: seller location filter | Viewed: | 41 times | Topic: | Suggestions | |
|
| In Suggestions, Nowaker writes:
| I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
Capability already exists
https://www.bricklink.com/searchAdvanced.asp
|
|
Author: | stergann | Posted: | Sep 15, 2019 04:02 | Subject: | Inventory Change Request for Set 70134-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part spa0036 (Not Applicable) Carnivorous Plant - Set 70134 (Counterpart)
|
Author: | FreeStorm | Posted: | Sep 15, 2019 03:47 | Subject: | Inventory Change Request for Set 2056-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x77b White String, Cord Thick (Undetermined Length)
Comments from Submitter:
You can see the string on original Box
|
|
Author: | Nowaker | Posted: | Sep 14, 2019 22:20 | Subject: | Search setting: seller location filter | Viewed: | 90 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
|
Author: | stergann | Posted: | Sep 14, 2019 16:49 | Subject: | Inventory Change Request for Set 76067-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 14769pb288 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Yellow Loop Arrows Pattern (Sticker) - Set 76067 (Counterpart)
* Add 1 Part 85984pb228 Dark Bluish Gray Slope 30 1 x 2 x 2/3 with Four Light Bluish Gray Gauges and Buttons Pattern (Sticker) - Set 76067 (Counterpart)
|
Author: | popsicle | Posted: | Sep 14, 2019 14:05 | Subject: | Re: 32064 variants | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, mfav writes:
The absolute best part-variation display I've seen. Beautiful!
You've got a real talent, Mark.
-Cory
|
Author: | Soviet | Posted: | Sep 14, 2019 13:18 | Subject: | Re: 40243 Stairs Spiral Step variants | Viewed: | 57 times | Topic: | Catalog | |
|
| In Catalog, Brickitty writes:
| Great catch!
I have a lot of these pieces, over 100, most in Light Gray from old Harry Potter
sets but also some newer ones in Dark Bluish Gray and Dark Tan. Not a single
one has the variant with the support facing toward the step. I'd assume that
one is rarer, but I'd love to see what others have to say.
|
Maybe it's worth millions D:
|
|
Author: | Brickitty | Posted: | Sep 14, 2019 12:37 | Subject: | Re: 40243 Stairs Spiral Step variants | Viewed: | 44 times | Topic: | Catalog | |
|
| Great catch!
I have a lot of these pieces, over 100, most in Light Gray from old Harry Potter
sets but also some newer ones in Dark Bluish Gray and Dark Tan. Not a single
one has the variant with the support facing toward the step. I'd assume that
one is rarer, but I'd love to see what others have to say.
|
|
Author: | paulvdb | Posted: | Sep 14, 2019 12:36 | Subject: | Inventory Change Request for Set 75810-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 2)
* Change 2 Part Light Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove {match ID 0 to 2}
Comments from Submitter:
My set has 44302b
|
|
Author: | Technologicat | Posted: | Sep 14, 2019 12:30 | Subject: | 40243 Stairs Spiral Step variants | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
|
| I noticed there are two variants of the 40243 spiral step that behave differently.
On the bottom side, there is a support ridge in the round part that may be located
(see picture):
- Facing away from the step
- Facing toward the step
Both parts have the same code, 40243.
When assembled with the 40244 support axle, with the steps fully spread out:
- The variant which has the support facing away from the step, will have
a part of each step overlapping the previous one (see second picture).
- The variant which has the support facing toward the step - as far I
can tell - will have no (or very little) overlap between adjacent steps.
See third picture, but note only the lowest 6 steps are of the second variant,
because I don't currently have a full set of 8 of them.
All of the steps pictured here are of the old light gray color.
So, does anyone happen to know if particular sets come with a particular variant,
or if it's just random?
|
|
|
Author: | HallBricks | Posted: | Sep 14, 2019 08:36 | Subject: | Re: Change time zone | Viewed: | 65 times | Topic: | Suggestions | |
|
| In Suggestions, hpoort writes:
Yeah, it might be quite complicated the very first time it's dealt with.
I'm not a programmer so I don't really know, but I that this problem
has been solved on many, many, other websites and I'm sure it could be implemented
on BrickLink as well.
|
Author: | Turez | Posted: | Sep 14, 2019 08:08 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 63 times | Topic: | Catalog | |
|
| Congratulations Paul and good luck with your new appointment! |
Author: | paulvdb | Posted: | Sep 14, 2019 06:44 | Subject: | Inventory Change Request for Set 75810-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2436c Medium Dark Flesh Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom (Alternate) (match ID 2)
* Change 2 Part Medium Dark Flesh 2436b Bracket 1 x 2 - 1 x 4 with Rounded Corners {match ID 0 to 1}
Comments from Submitter:
My set has 2436c
|
|
Author: | EnchantedBricks | Posted: | Sep 13, 2019 22:38 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 62 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
I know I am pretty new here, and I don't know a lot of the stories of the
"Good Ole Days" and I may not be a very large store.. YET, But for what its
worth Congrats !!
|
|
Author: | axaday | Posted: | Sep 13, 2019 21:20 | Subject: | Re: Inventory Change Request for Set 3243-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part Red {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
This one is really probably pretty obvious, but I do have a pic anyway.
|
|
|
|
Author: | axaday | Posted: | Sep 13, 2019 21:20 | Subject: | Inventory Change Request for Set 3243-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Red {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
This one is really probably pretty obvious, but I do have a pic anyway.
|
|
Author: | SezaR | Posted: | Sep 13, 2019 21:09 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 60 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congratulations Paul!
|
|
Author: | ElvisandBane | Posted: | Sep 13, 2019 20:15 | Subject: | Inventory Change Request for Set 41313-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6179pb164 Dark Pink Tile, Modified 4 x 4 with Studs on Edge with Beach Ball and Water Slide Pattern (Sticker) - Set 41313 (Counterpart)
|
|
Author: | axaday | Posted: | Sep 13, 2019 19:11 | Subject: | Re: Inventory Change Request for Set 3152-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Delete 4 Part 4624 Red Wheel 8mm D. x 6mm
* Delete 4 Part 3139 White Tire 14mm D. x 4mm Smooth Small Single
* Change 4 Part Red 4624c04 Wheel 8mm D. x 6mm with White Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
Comments from Submitter:
Sealed set
|
|
|
|
Author: | axaday | Posted: | Sep 13, 2019 19:10 | Subject: | Inventory Change Request for Set 3152-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 4 Part 4624 Red Wheel 8mm D. x 6mm
* Delete 4 Part 3139 White Tire 14mm D. x 4mm Smooth Small Single
* Change 4 Part Red 4624c04 Wheel 8mm D. x 6mm with White Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
Comments from Submitter:
Sealed set
|
|
Author: | BricksThatStick | Posted: | Sep 13, 2019 15:28 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 85 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Thanks everyone for the kind words
|
|
Author: | Adjour | Posted: | Sep 13, 2019 14:52 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 58 times | Topic: | Catalog | |
|
| Impressive contributions, welcome (back?) ! |
|
Author: | popsicle | Posted: | Sep 13, 2019 14:51 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 63 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
|
Welcome back, Paul.
And thank you. If you need any consideration from our store please let me know.
It would make me happy to be able to pay-it-back, what you and the others contribute.
-Cory
|
|
Author: | Adjour | Posted: | Sep 13, 2019 14:51 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 75 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
| In Catalog, crazylegoman writes:
Really? What a keyboard warrior you are.
|
Ironically, I've always seen that part for sale and wondered for long periods
of time what it would be good for.
|
Author: | randyf | Posted: | Sep 13, 2019 14:45 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 75 times | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
Really? What a keyboard warrior you are.
|
|
Author: | axaday | Posted: | Sep 13, 2019 14:45 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 55 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Welcome back, Paul #2. Thank you for helping Dan and thank you for helping Dan's
legacy. I never knew him at all, but the thing he made is a good thing and it
needs care. I'll be seeing you around.
|
|
Author: | Admin_Russell | Posted: | Sep 13, 2019 14:33 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 99 times | Topic: | Catalog | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| In Catalog, jennnifer writes:
| In Catalog, Admin_Russell writes:
|
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
Jen
|
This thread was supposed to be a joyful welcome for a new team member. I'm
sorry if it was offensive to anyone and I don't want to argue a point.
I will leave this thread as it is for now. But if people keep commenting on this
issue, I will be forced to lock it.
|
|
Author: | axaday | Posted: | Sep 13, 2019 14:23 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 67 times | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
Are you serious?
|
|
Author: | popsicle | Posted: | Sep 13, 2019 14:17 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 104 times | Topic: | Catalog | |
|
| In Catalog, jennnifer writes:
| In Catalog, Admin_Russell writes:
|
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
|
I think you make a valid point, I felt so when I first read Russell’s statement
yesterday. But if you’ll allow me just a moment of open mindedness to express
how I reasoned through that portion or Russell’s post…
Simply put, the 'attitude' Russell speaks of, and what you've taken
umbrage with, is for lack of a better term, site first. That is the idea
of BL, not any given people of it - at any given time. Yes, it’s a for-profit
venture, but it’s inception and all important developmental years, were steeped
in the idea of a site that is community for AFOL, according to what is now doctrine
but simply was what Daniel expressed.
I think Russell (understanding he’s partially responsible for the current direction
of BL) to use a metaphor, is attempting to correct course of the ship we all
have boarded
You were as dedicated a BL Inventories Admin as any, I thought. We never met,
but I think I remember you from the Seattle Round Table, sitting across from
my son and I. You’ve given a lot of yourself to the site and should be shown
appreciation, along with the several others that have given selflessly to better
our catalog, including the many non-admin contributors. Catalog is what makes
this site, IMHO.
All that being said, I understand Russell’s statement.
As to your statement "how they were treated by the management and members
of this site" you're no longer an admin, express yourself! I don't believe
unpaid positions are subject to the same enforceability of non-discloser agreements,
if any If you want people to understand the concern that you've taken
the time to post, you'll need to add more context.
Forum participants are less than a percent of the overall site membership, but
the percentage of those that read the forum is far greater.
Take your time, but tell your story, Jen. That is, if you haven't already
somewhere here in the forum.
-Cory
|
|
Author: | superchicken77 | Posted: | Sep 13, 2019 14:13 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 61 times | Topic: | Catalog | |
|
| I thought the same thing.
In Catalog, jennnifer writes:
| In Catalog, Admin_Russell writes:
|
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
Jen
|
|
|
Author: | Soviet | Posted: | Sep 13, 2019 13:56 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 67 times | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
I see what you did there
|
Author: | crazylegoman | Posted: | Sep 13, 2019 13:53 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 105 times | Topic: | Catalog | |
|
| |
Author: | samsam2 | Posted: | Sep 13, 2019 12:45 | Subject: | Inventory Change Request for Set 7477-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6573pb001L Dark Bluish Gray Technic, Gear Differential, 24-16 Teeth with Lime Containers Pattern Model Left Side (Sticker) - Set 7477 (Counterpart)
|
|
Author: | kaiser1401 | Posted: | Sep 13, 2019 10:20 | Subject: | Stud.io feature: background image or sketch | Viewed: | 51 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| First: Is this the right part of the forum to suggest features for stud.io? Where
else can I contact developers file bugs, propose features etc?
I think it would be nice to be able to import a sketch, drawing, photo as a background
plane (either xy-plane, one of the three or freely positioned) and scale it to
your needs. I think this would help me designing models way more easily if I
can base it on a drawing, blueprint, etc.
Any opinions on that?
-Kaiser
|
|
Author: | VOTB | Posted: | Sep 13, 2019 10:10 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 74 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Thanks for the announcement! And I am greatful for everyone's hard work!
|
|
Author: | jennnifer | Posted: | Sep 13, 2019 09:33 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 151 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
|
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
|
Sorry, but I must say that I take offense at this statement. You are passing
judgement on the previous admins and their reasons for leaving the site. You
are implying that the 'correct' attitude would be to maintain one's
dedication to a site even after you may have had a bad experience.
You don't know how they were treated by the management and members of this
site.
Jen
|
|
Author: | paulvdb | Posted: | Sep 13, 2019 05:12 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 61 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congrats and welcome.
|
|
Author: | Rob_and_Shelagh | Posted: | Sep 13, 2019 03:51 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Excellent news, excellent choice!
Thanks for taking this role Paul
Robert
|
|
Author: | Brickwilbo | Posted: | Sep 13, 2019 03:35 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congratulations.
|
|
Author: | Soviet | Posted: | Sep 13, 2019 03:30 | Subject: | Re: We have a new Catalog Associate! | Viewed: | 50 times | Topic: | Catalog | |
|
| In Catalog, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
Congratulations kind sir.
|
|
Author: | Admin_Russell | Posted: | Sep 13, 2019 01:14 | Subject: | We have a new Catalog Associate! | Viewed: | 338 times | Topic: | Catalog | Status: | Open | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| Hello everyone,
I'm very pleased to announce that we have appointed longtime member BricksThatStick
to the Catalog Associate position. Paul served as the site's 4th Inventories
Admin during 2010 to 2011 alongside Emma (SimplyBricks). He effectively replaced
Dan Jezek, the site's founder, who had a special fondness for inventories
work and who of course left very big shoes to fill.
If you take the time to scroll through Paul's 900+ inventories changes:
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=44744&v=3
...you will notice a sea of green, followed by a sea of blue, followed by another
sea of green. This means he continued to contribute to the catalog after having
once been an admin, which is (unfortunately) something rather uncommon. But it
demonstrates a great and correct attitude, the kind of attitude we wish to model
for all of our other contributors out there, especially the ones still cutting
their teeth.
Paul has, over the years, been very active as a seller and many of you will know
him also from his activity in the Forum. We look forward to his practical insights
and we are confident he will play a vital role in our growing catalog team.
Please welcome him back!
Russell
|
|
Author: | BricksShop | Posted: | Sep 13, 2019 00:01 | Subject: | Inventory Change Request for Set 7879-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 86059 Dark Bluish Gray Rein with Bridle Flexible
* Add 1 Part 86058 Tan Tauntaun / Wampa Horn Right
* Add 1 Part 86057 Tan Tauntaun / Wampa Horn Left
* Add 1 Part 86056 Light Bluish Gray Tauntaun Arm Right
* Add 1 Part 86055 Light Bluish Gray Tauntaun Arm Left
* Add 1 Part 64800pb01c01 Light Bluish Gray Tauntaun Body with Legs and Eyes Pattern
* Change 1 Part Light Bluish Gray 64800pb01c02 Tauntaun, Star Wars with Rigid Tail {Regular to Counterpart}
Comments from Submitter:
Tauntaun is provided in single parts according parts list in instruction
|
|
Author: | Teup | Posted: | Sep 12, 2019 20:15 | Subject: | Re: Change time zone | Viewed: | 46 times | Topic: | Suggestions | |
|
| In Suggestions, SylvainLS writes:
| In Suggestions, hpoort writes:
| In Suggestions, HallBricks writes:
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
Have you ever thought about it's complexity?
|
Very simple: everything is stored in UTC and presented in a local/chosen TZ.
The UTC → local TZ conversion is done with a standard, well tested library.
There. The complexity is outsourced.
Besides, it’s just about presentation. Official times are those in the database,
on the server, in UTC.
I stopped watching after he began talking about DST (“autumn in England”).
And that’s absurd. He talks about a programmer who:
1. doesn’t know what TZs are,
2. adds cases one by one instead of, finally, learning what’s it about,
3. and thus reinvents the wheel, spoke by spoke.
Yes, timezones are complex (and involve politics, therefore also totally insane)
and that’s why you don’t cobble up something in your garage.
Yes, timezones change frequently (remember, politics), but you just update the
TZ data the library uses.
One could do the same kind of video about 3D geometry or any other complex or
complicated but already well known feature.
Just showing a given UTC time in a chosen TZ should be easy peasy.
|
I thought it would be a sarcastic video. As you say, there's really no need
to reinvent the wheel, this has been done so many times over there must be plenty
of resources you can use very easily.
BrickOwl has timezones, other market platforms have timezones, forums have timezones,
social media have timezones.. and it all works without issues. Bricklink is really
the odd one out.
|
|
Author: | SylvainLS | Posted: | Sep 12, 2019 19:26 | Subject: | Re: Change time zone | Viewed: | 38 times | Topic: | Suggestions | |
|
| In Suggestions, hpoort writes:
| In Suggestions, HallBricks writes:
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
Have you ever thought about it's complexity?
|
Very simple: everything is stored in UTC and presented in a local/chosen TZ.
The UTC → local TZ conversion is done with a standard, well tested library.
There. The complexity is outsourced.
Besides, it’s just about presentation. Official times are those in the database,
on the server, in UTC.
I stopped watching after he began talking about DST (“autumn in England”).
And that’s absurd. He talks about a programmer who:
1. doesn’t know what TZs are,
2. adds cases one by one instead of, finally, learning what’s it about,
3. and thus reinvents the wheel, spoke by spoke.
Yes, timezones are complex (and involve politics, therefore also totally insane)
and that’s why you don’t cobble up something in your garage.
Yes, timezones change frequently (remember, politics), but you just update the
TZ data the library uses.
One could do the same kind of video about 3D geometry or any other complex or
complicated but already well known feature.
Just showing a given UTC time in a chosen TZ should be easy peasy.
|
|
Author: | JerseyGirl689 | Posted: | Sep 12, 2019 16:57 | Subject: | Re: Change NPB Timeline | Viewed: | 51 times | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| In Suggestions, JerseyGirl689 writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I completely agree, 7 days to open, 3 days to close, with or without a response.
If they have time to respond they can use that time to pay. If they can't
afford to pay, they shouldn't have made the purchase to start with.
Also, to those sellers who simply cancel and move on, you're leaving yourself
open to a retaliatory negative FB and enabling a NPB to continue doing the same
thing to other sellers. I have inventory held hostage right now for a NPB, despite
the fact his FB clearly shows this is a habit. If those sellers had used the
NPB process, as they should have, he would have been suspended and my inventory
would be free right now.
Darcy
|
Yes they can leave a neg, but 90% of the time it a a zero feedback buyer doing
this. When they get the negative back from the seller they will find themselves
at -1 and find it much more difficult to buy from anyone.
|
Yes 90% of the time it is zero or low FB buyers, but that really doesn't
matter, it's still an undeserved blemish on your record. This is strangers
dealing with strangers, IMHO your reputation is just as important as your customer
service and parts quality.
|
And I do agree that I am making the problem worse by not following the process,
but the process just plain sucks and I'm not wasting my time dealing with
it.
|
You're right, the NPB process sucks, but it's all we have right now,
so we have to deal with it. Otherwise NPB's are going to continue wasting
our time and tying up our inventory for nothing.
|
I wish I could figure out the instant payment for the single boxed sets I sell.
I know exactly how much they will weigh and how big the shipping box is for each
sealed set I have. But I am just too stupid to figure it out. I really wish it
would just calculate it for me like ebay does. I'm considering actually just
offering free shipping and having instant payment but I would be buried so far
in the listings I would never be seen.
|
As for IC, haven't even tried so IDK. I pull and recheck every part, weigh
and manually send invoices. I want to know everything is perfect and correct
before invoicing and shipping. Actually if they implement their proposed changes
it seems we'll be forced to use IC, which is why I've started exploring
other options. It sucks, I've been here a long time and really like it,
but if or when they do force it on us I'll be closing my store and moving
on. This nonsense of if they payed too much you have to refund, if they paid
too little you have to eat it, doesn't work for me.
Darcy
|
|
Author: | hpoort | Posted: | Sep 12, 2019 16:36 | Subject: | Re: Change time zone | Viewed: | 44 times | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
Have you ever thought about it's complexity? See Tom Scott's YouTube
episode about implementing time zones in programming:
https://www.youtube.com/watch?v=-5wpm-gesOY
Hans-Peter
|
|
Author: | popsicle | Posted: | Sep 12, 2019 15:09 | Subject: | Re: Change time zone | Viewed: | 45 times | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
You no doubt know of Greenwich mean time, now you get to participate in BL time!
Vad klagar du på?
You're part of a few!
-Cory
|
|
Author: | mscheaf | Posted: | Sep 12, 2019 14:31 | Subject: | Re: Change NPB Timeline | Viewed: | 39 times | Topic: | Suggestions | |
|
| In Suggestions, JerseyGirl689 writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I completely agree, 7 days to open, 3 days to close, with or without a response.
If they have time to respond they can use that time to pay. If they can't
afford to pay, they shouldn't have made the purchase to start with.
Also, to those sellers who simply cancel and move on, you're leaving yourself
open to a retaliatory negative FB and enabling a NPB to continue doing the same
thing to other sellers. I have inventory held hostage right now for a NPB, despite
the fact his FB clearly shows this is a habit. If those sellers had used the
NPB process, as they should have, he would have been suspended and my inventory
would be free right now.
Darcy
|
Yes they can leave a neg, but 90% of the time it a a zero feedback buyer doing
this. When they get the negative back from the seller they will find themselves
at -1 and find it much more difficult to buy from anyone.
And I do agree that I am making the problem worse by not following the process,
but the process just plain sucks and I'm not wasting my time dealing with
it.
I wish I could figure out the instant payment for the single boxed sets I sell.
I know exactly how much they will weigh and how big the shipping box is for each
sealed set I have. But I am just too stupid to figure it out. I really wish it
would just calculate it for me like ebay does. I'm considering actually just
offering free shipping and having instant payment but I would be buried so far
in the listings I would never be seen.
|
|
Author: | mscheaf | Posted: | Sep 12, 2019 14:23 | Subject: | Re: Change NPB Timeline | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, bje writes:
| In Suggestions, mscheaf writes:
| In Suggestions, bje writes:
| In Suggestions, calsbricks writes:
| In Suggestions, mscheaf writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
As a buyer you can file a paypal claim or a chargeback with your bank. Sellers
have no options except the npb system
|
?? If the seller has not invoiced, how do I have a claim? Because of exchange
controls I've had cancellations cost me 26% of the order value after three
weeks, with still no invoice from the seller concerned and no way to cancel and
move on except to wait it out.
Bear in mind also, BL is a contracts based systems, so even if a seller invoice
on day 20, he can still start an NPB after 7 days, irrespective of the time he
took to invoice or even if the buyer's circumstances have changed. Imagine
a wait of two weeks for an international order and exchange rate drop of 10%,
making the order 10% plus rate pips more expensive for the buyer. These are not
the most extreme examples.
Sellers also can cancel irrespective, buyers have to request a cancellation as
a favour from a seller who is not responding, go figure.
|
????If you haven't paid how is your money tied up for weeks?????????
|
|
Author: | calsbricks | Posted: | Sep 12, 2019 13:49 | Subject: | Re: Change NPB Timeline | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| | Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
That is probably why they will never do anything about it - it is another push
for non-IC adopters to adopt IC.
|
Sorry 1 more thing coming from someone who has spent a great many years in the
software development world. Software is normally designed to suit end users and
it is normally designed and developed in conjunction with them. That hasn't
happened here at Bricklink, On the other hand gaming software often comes from
the developers themselves rather than the end user - and quite often that works.
But when it comes to serious applications it never does unless the developers
have a rock solid systems spec which has been put together by a quality experienced
systems analyst - again doesn't happen here or at least it does not appear
so. When was the first, or last time as a seller or buyer you were asked what
you wanted to see in the software?
|
|
Author: | calsbricks | Posted: | Sep 12, 2019 13:39 | Subject: | Re: Change NPB Timeline | Viewed: | 36 times | Topic: | Suggestions | |
|
| In Suggestions, yorbrick writes:
| | Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
That is probably why they will never do anything about it - it is another push
for non-IC adopters to adopt IC.
|
There is a simple answer to that - make it applicable for all regions - redesign
it so those of us who use multiple boxes (3 large letter styles, and 11 small
parcel styles) do not have to set up a delivery method for each of those across
all boxes. 14 first class; 14 first class confirmed; 14 2nd class confirmed;
14 next day delivery; 14 air mail; 14 air mail confirmed. Good grief - all day
every day just setting up delivery methods and the design of that is totally
flawed - IC should have been regionalised to accommodate not just weight systems
but weight and volume systems. Yes I know we could try and reduce boxes but that
is not convenient for us nor our customers. We don't send out half full boxes.
In addition if the design had been better it would have allowed them to make
the simple changes to accommodate the changes in the US postal system where everything
is being done by workaround.
Forcing people to use a feature is a non-starter - usage should be up to the
individual not a method which doesn't work 100% of the time and also has
over 40,000 items in its catalogue without dimensions. but you are probably right
- yet another wonderful idea just like pp for marketplaces, dropping paypal offsite
- again to force IC. NO matter what the take-up is in real terms the feature
needs re-thinking.
What next force members to use their new Order detail page ; or their new My
BL page -- you must now use Stud.io to design anything. Oh and lest we forget
you must use the new wanted list (but after clamour we will leave the classic
one available, and we will reinstate paypal offsite).
|
|
Author: | yorbrick | Posted: | Sep 12, 2019 13:17 | Subject: | Re: Change NPB Timeline | Viewed: | 31 times | Topic: | Suggestions | |
|
| | Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
That is probably why they will never do anything about it - it is another push
for non-IC adopters to adopt IC.
|
|
Author: | JerseyGirl689 | Posted: | Sep 12, 2019 13:16 | Subject: | Re: Change NPB Timeline | Viewed: | 32 times | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I completely agree, 7 days to open, 3 days to close, with or without a response.
If they have time to respond they can use that time to pay. If they can't
afford to pay, they shouldn't have made the purchase to start with.
Also, to those sellers who simply cancel and move on, you're leaving yourself
open to a retaliatory negative FB and enabling a NPB to continue doing the same
thing to other sellers. I have inventory held hostage right now for a NPB, despite
the fact his FB clearly shows this is a habit. If those sellers had used the
NPB process, as they should have, he would have been suspended and my inventory
would be free right now.
Darcy
|
|
Author: | Teup | Posted: | Sep 12, 2019 12:52 | Subject: | Re: Change NPB Timeline | Viewed: | 30 times | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| In Suggestions, Teup writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I don't know about other countries but over here 14 days is a widely accepted
standard term for invoices to be paid. Sometimes it's longer, but it's
never less than 14 days. I wouldn't find it professional if a company gave
me an invoice that had to be paid in less than 14 days.
Also, inventory moves slowly and parts typically take over a year to sell. I
don't see how a few extra days for a fraction of the inventory are so important.
Bricklink downtime should be a way bigger concern.
|
In USA bills due upon receipt are quite common, especially for medical bills.
Also, I often get bills in the mail for various things that are due in less than
2 weeks. Again, if you can't afford it, don't buy it. This isn't
water or medicine or food. It's a freaking luxury item toy.
|
Maybe it's a cultural difference. If the code of conduct is different in
the US, then I do understand you'd expect Bricklink to match with that.
As for freaking luxury toys, today I got an invoice from Lego.com in the mail
that is due in 18 days. That's pretty usual to me. I wouldn't want to
seem less professional than Lego.com. An invoice with a number below 14 days
would feel pushy to me based on what I am used to.
Anyway I do question how big a deal it is. Customer service costs money. And
of all aspects of customer service, patience is pretty much the cheapest one.
The average value of a Bricklink order is approximately $20. Let's say you
are always having one NPB going on constantly all throughout your Bricklink career.
I would say: Spend $10 (part selling value: $20) one time on a set, and call
it the NPB buffer. That compensates the $20 worth of inventory that is constantly
being blocked by NPBs. Maybe I'm too clinical and calculating but as far
as I can see that solves the problem
|
|
|
Author: | bje | Posted: | Sep 12, 2019 12:00 | Subject: | Re: Change NPB Timeline | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| In Suggestions, bje writes:
| In Suggestions, calsbricks writes:
| In Suggestions, mscheaf writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
As a buyer you can file a paypal claim or a chargeback with your bank. Sellers
have no options except the npb system
|
?? If the seller has not invoiced, how do I have a claim? Because of exchange
controls I've had cancellations cost me 26% of the order value after three
weeks, with still no invoice from the seller concerned and no way to cancel and
move on except to wait it out.
Bear in mind also, BL is a contracts based systems, so even if a seller invoice
on day 20, he can still start an NPB after 7 days, irrespective of the time he
took to invoice or even if the buyer's circumstances have changed. Imagine
a wait of two weeks for an international order and exchange rate drop of 10%,
making the order 10% plus rate pips more expensive for the buyer. These are not
the most extreme examples.
Sellers also can cancel irrespective, buyers have to request a cancellation as
a favour from a seller who is not responding, go figure.
|
|
Author: | mscheaf | Posted: | Sep 12, 2019 11:53 | Subject: | Re: Change NPB Timeline | Viewed: | 33 times | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I don't know about other countries but over here 14 days is a widely accepted
standard term for invoices to be paid. Sometimes it's longer, but it's
never less than 14 days. I wouldn't find it professional if a company gave
me an invoice that had to be paid in less than 14 days.
Also, inventory moves slowly and parts typically take over a year to sell. I
don't see how a few extra days for a fraction of the inventory are so important.
Bricklink downtime should be a way bigger concern.
|
In USA bills due upon receipt are quite common, especially for medical bills.
Also, I often get bills in the mail for various things that are due in less than
2 weeks. Again, if you can't afford it, don't buy it. This isn't
water or medicine or food. It's a freaking luxury item toy.
|
|
Author: | mscheaf | Posted: | Sep 12, 2019 11:50 | Subject: | Re: Change NPB Timeline | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, bje writes:
| In Suggestions, calsbricks writes:
| In Suggestions, mscheaf writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
As a buyer you can file a paypal claim or a chargeback with your bank. Sellers
have no options except the npb system
|
|
Author: | bje | Posted: | Sep 12, 2019 11:37 | Subject: | Re: Change NPB Timeline | Viewed: | 38 times | Topic: | Suggestions | |
|
| In Suggestions, calsbricks writes:
| In Suggestions, mscheaf writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
And while we are at it, as a buyer, how come an NRS can tie up my buying money
for three weeks!? If a seller is not interested in selling, can I not please
just cancel the order myself after 3 days and go somewhere else? This is the
one part of Bricklink I have always found very unfair to buyers.
|
|
Author: | Turez | Posted: | Sep 12, 2019 11:36 | Subject: | Re: Inventory Change Request for Set 6273-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| Hello,
sorry for my late reply.
In Inventories Requests, neoleg writes:
| I own the entire collection for Pirates I up until 1991 and I got them right
when they came out (all new from sealed boxes). All treasure chests are there
and none of them is the A-type, all are the old B-Type (including set 6260 from
1989).
|
| So I guess there really must be alternates for all of these sets.
|
All other sets from 1989-1991 already have 4738b in their inventories. 6273 is
the first set which has 4738a as regular part. But thanks to your request, we
now know that some (most likely the very early) copies of 6273 still came with
4738b. So you can submit a new request:
- Add 4738b as regular item
- Move 4738a to alternate
- Add the next unused Match ID to both entries
If you have time and want to help a little bit more, it would be great if you
could check your pirates sets for undetermined parts or other part variants.
For example, the boat mast parts in 6274 or the palm trunks in a few sets are
still undetermined.
| The picture on the box also shows the B-type (see attachment).
|
Box photos are usually not a good source for information about part variants.
They are produced weeks or months before set production starts and may show variants
which are never included in any copy of the set.
Regards,
Jonas
|
|
Author: | Teup | Posted: | Sep 12, 2019 11:26 | Subject: | Re: Change NPB Timeline | Viewed: | 31 times | Topic: | Suggestions | |
|
| In Suggestions, manganschlamm writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
OK then in return I propose that we buyers can initiate and complete NRS and
NSS after proportionally shorter time. If sellers want to give us buyers less
time to make the payment, then they should also have less time to issue invoices
and ship. Something for something. As a side note, I would like to mention that
in Europe many payments are still made by conventional bank transfer, which may
take few days to complete (and will only be processed on business days).
Final comment: Sellers that want to push for high-speed payment should accept
the fact that for 99% of buyers this is a hobby whereas for a considerable fraction
of sellers it is a full- or part-time business. We buyers typically have a normal
job and need to find the time to do things related to BL.
|
+1
14 days is the basic level of customer service. And if nothing is defined in
the terms, the legal term is even 30 days.
14 days is also the legal amount of time a buyer has to change their mind about
an order and return it. It wouldn't make much sense to me to on the one hand
force a buyer to pay quicker than 14 days when after that they still have a couple
of days they can get their money back.
|
|
Author: | Teup | Posted: | Sep 12, 2019 11:21 | Subject: | Re: Change NPB Timeline | Viewed: | 41 times | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
I don't know about other countries but over here 14 days is a widely accepted
standard term for invoices to be paid. Sometimes it's longer, but it's
never less than 14 days. I wouldn't find it professional if a company gave
me an invoice that had to be paid in less than 14 days.
Also, inventory moves slowly and parts typically take over a year to sell. I
don't see how a few extra days for a fraction of the inventory are so important.
Bricklink downtime should be a way bigger concern.
|
|
Author: | OurBricks | Posted: | Sep 12, 2019 11:20 | Subject: | Re: Remark in PartOut | Viewed: | 27 times | Topic: | Suggestions | |
|
| Have you taken a look at the Brick Seller store management online app?
It has some nice part out features. It will even recommend a storage location
(in the remarks field) for items you already have in your inventory.
You can find a link to it on the BrickLink Links page here: https://www.bricklink.com/links.asp?catID=9
In Suggestions, BrickTobi writes:
| At the moment I have to search very time-consuming for the remarks when distributing
new parts, which are already in my invetory. Currently I always have to jump
into the inventory and take over the remark.
My suggestion would be to transfer the existing remarks already into the corresponding
fields. This function can also be optional (only if I want to transfer the old
remarks).
I would be very happy about this function.
Thanks and greetings
|
|
|
Author: | Teup | Posted: | Sep 12, 2019 11:16 | Subject: | Re: Change time zone | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
...and actually know when stuff happened on Bricklink? Like knowing when messages
between buyers and sellers were sent, or when an order status changed?! No
way, don't mess with cultural heritage! The internet's last forum without
timezones. It's like living in history! (also because, well, the time stamps
always indicate an earlier time than it is here)
|
|
Author: | calsbricks | Posted: | Sep 12, 2019 10:58 | Subject: | Re: Change NPB Timeline | Viewed: | 39 times | Topic: | Suggestions | |
|
| In Suggestions, mscheaf writes:
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
Once again a constant thread and everyone agrees with it except Bricklink for
some strange reason. Why should we have to let our inventory be tied up for two
weeks or longer when someone isn't going to pay for their order.
Bring the business side of the site into the 21st century, please - IC doesn't
work for all and for those that do not use it this is a real pain and totally
unnecessary.
|
|
Author: | mscheaf | Posted: | Sep 12, 2019 10:56 | Subject: | Re: Change NPB Timeline | Viewed: | 34 times | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| Could you imagine
how frustrating it would be if you went on Amazon or Walmart to buy something
and were restricted in anyway?
|
You mean like when I go to Amazon and the products I want to buy are for Prime
members only. Not the sale price, mind you, the actual item. If you aren't
in prime you can't buy it for any price. Yeah it sucks bad and is one of
the reasons why Amazon is always the last place I check now after exhausting
literally all other options.
|
|
Author: | calsbricks | Posted: | Sep 12, 2019 10:55 | Subject: | Re: Change time zone | Viewed: | 39 times | Topic: | Suggestions | |
|
| In Suggestions, HallBricks writes:
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
It isn't and this has been around since day 1. Nothing has ever been done
about it.
|
|
Author: | mscheaf | Posted: | Sep 12, 2019 10:52 | Subject: | Re: Change NPB Timeline | Viewed: | 41 times | Topic: | Suggestions | |
|
| In Suggestions, MidwestBrick writes:
| I had enough of these in the last few weeks that waiting 2 full weeks is painful
to complete them.
I don't mind the 1 week to pay before it is started. But another full 7 days
to complete the NPB is not necessary.
I would propose 3 additional days and that is it. Let us get our stock back
in our stores to sell to someone else instead of being held at our will for 14
full days when 10 is plenty enough.
I can't be the only one that feels this way and 14 days might have worked
10-15 years ago when access to Smart-Phones wasn't as widespread, but these
days, you can't go far without having the ability to respond. Thanks
|
This is exactly why I just cancel the order and never file NPB. It just takes
two long. 2 weeks is insane. It shouldn't take a week to pay. It shouldn't
take more than a few days to pay, if you don't have the money don't order
stuff, pretty simple. I know a lot of buyers are getting let off the hook by
this but I don't have the time or patience and I don't want my inventory
constantly tied up for a fortnight. I just cancel the order ban the buyer and
move on.
|
|
Author: | HallBricks | Posted: | Sep 12, 2019 10:44 | Subject: | Change time zone | Viewed: | 95 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
|
Author: | popsicle | Posted: | Sep 12, 2019 09:38 | Subject: | Re: How much does your pet mean to you? | Viewed: | 51 times | Topic: | Suggestions | |
|
| In Suggestions, JerseyGirl689 writes:
| In Suggestions, popsicle writes:
| Just had a stroke of genius (or just a stroke ) while replying to post
I would really like to see more pics of our member’s pet. What do you think about
showing or introduce your animal companion to the BL membership here on the forum?
I suggest a new forum subtopic, under Off Topic: Pets
Anecdotes and/or pics of your pets? Maybe of interrupting your lego work or other
mischief. Or just an introduction of your nonhuman companion, new or old. What
your pet did today
Even though we don't have furry companions (son's allergies) we really
enjoy animal pics and stories. Think most do, evidenced by it's popularity
on youtube.
What do think? Think there is enough interest to warrant a sub-topic in the forum?
|
|
Well done, Darcy!
We (I do) tend to forget all the ways they help us beyond just being the best,
loyal companion possible.
...and they've been carrying their own weight (in one form or another) since
they decided to throw-in with us hairless two legged types, long ago
|
|
Author: | paulvdb | Posted: | Sep 12, 2019 09:21 | Subject: | Re: Inventory Change Request for Set 76086-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, Ladyhawke74 writes:
| Please make changes to the following inventory:
* Add 2 Part 44225pb001a Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side A (Sticker) - Set 76086 (Counterpart)
* Add 2 Part 44225pb001b Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side B (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 3010pb274 Black Brick 1 x 4 with Grille and Red Headlights Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb083 Yellow Tile 1 x 3 with Red Gauges and Buttons Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb084 Yellow Tile 1 x 3 with Red Level Meter Pattern (Sticker) - Set 76086 (Counterpart)
|
Looks like the sticker is applied upside down on the image of 3010pb274.
Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched
between the two parts based on set images and instructions.
|
It also looks like technic half pins were left in the 44225 in both images.
|
I see that new images have been added to these part with stickers applied correctly.
I have accepted these request now that the images are correct.
|
|
Author: | paulvdb | Posted: | Sep 12, 2019 09:18 | Subject: | Re: Inventory Change Request for Set 7823-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 2 Part 3242c Light Gray Train, Track 12V Conducting Rail Straight without Cable Connection Holes (Alternate) (match ID 2)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports (match ID 5)
* Add 3 Part 3003old Red Brick 2 x 2 without Inside Supports (match ID 4)
* Add 2 Part 3002old Red Brick 2 x 3 without Cross Supports (match ID 6)
* Change 2 Part Light Gray 3242 Train, Track 12V Conducting Rail Straight {match ID 0 to 2}
* Change 1 Part White 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 5}
* Change 3 Part Red 3003 Brick 2 x 2 {Regular to Alternate} {match ID 0 to 4}
* Change 2 Part Red 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 6}
Comments from Submitter:
The evidence will be uploaded soon.
|
Did you forget to upload the evidence?
|
Hi Paul,
No I didn't forget. There are so many inv. changes, catalog changes, adding
items,...that I have plans to submit, take photos, upload them to my PC, and
then, upload them on BL. The only way I can handle all these is to do them step
by step, as my time allows me.
This NIB copy that I purchased should be from 1988 since the box is the first
version (1986-8) and the straight conducting rails don't have holes and have
reinforcements under their notches (1988-90).
I have never seen light gray hinges with solid stud with this set. I even have
one used copy that I bought from the first owner and was an early release too.
The (light gray) hinges with hollow studs were produced since very early 1985
https://www.bricklink.com/messageThread.asp?ID=235359
So I think we should remove them from this set. If we find a reliable source
that they were used for this set, then they should come back, but I doubt.
The length of the wire in this set
is 76cm.
|
Sorry it took me a while to get back to this request. My own set was in a location
that was a bit inconvenient to reach. I was planning to reorganize a bit here
so was planning to use that opportunity to check my set. But it took longer than
I expected to finally get around to that.
I can confirm that my set has the 3002old and 3003old. Also the 3242c and 4081b.
I had already added 4081b in blue as alternate long ago. I guess at that time
I forgot to add it in red because someone else added it later. But my set has
4081b in both colors.
For the solid stud hinges it seems very likely that they never came in this set.
The only other sets with them in light gray are from 1983 and none of the sets
from 1985 have them in their inventories so it seems unlikely that they would
suddenly show up again in 1986. So I think they can be removed.
|
|
Author: | BrickTobi | Posted: | Sep 12, 2019 07:17 | Subject: | Re: Remark in PartOut | Viewed: | 25 times | Topic: | Suggestions | |
|
| In Suggestions, NelisSolis writes:
| In Suggestions, BrickTobi writes:
| At the moment I have to search very time-consuming for the remarks when distributing
new parts, which are already in my invetory. Currently I always have to jump
into the inventory and take over the remark.
My suggestion would be to transfer the existing remarks already into the corresponding
fields. This function can also be optional (only if I want to transfer the old
remarks).
I would be very happy about this function.
Thanks and greetings
|
I think this is already available in the "consolidation" paragraph of the part-out
page.
|
Yes, but I have to write my remarks in the step before the consolidation. So
I think it would be helpful to have the remarks in this step already.
|
|
Author: | JerseyGirl689 | Posted: | Sep 11, 2019 23:56 | Subject: | Re: How much does your pet mean to you? | Viewed: | 61 times | Topic: | Suggestions | |
|
| In Suggestions, popsicle writes:
| Just had a stroke of genius (or just a stroke ) while replying to post
I would really like to see more pics of our member’s pet. What do you think about
showing or introduce your animal companion to the BL membership here on the forum?
I suggest a new forum subtopic, under Off Topic: Pets
Anecdotes and/or pics of your pets? Maybe of interrupting your lego work or other
mischief. Or just an introduction of your nonhuman companion, new or old. What
your pet did today
Even though we don't have furry companions (son's allergies) we really
enjoy animal pics and stories. Think most do, evidenced by it's popularity
on youtube.
What do think? Think there is enough interest to warrant a sub-topic in the forum?
|
|
|
|
Author: | NelisSolis | Posted: | Sep 11, 2019 16:54 | Subject: | Re: Remark in PartOut | Viewed: | 37 times | Topic: | Suggestions | |
|
| In Suggestions, BrickTobi writes:
| At the moment I have to search very time-consuming for the remarks when distributing
new parts, which are already in my invetory. Currently I always have to jump
into the inventory and take over the remark.
My suggestion would be to transfer the existing remarks already into the corresponding
fields. This function can also be optional (only if I want to transfer the old
remarks).
I would be very happy about this function.
Thanks and greetings
|
I think this is already available in the "consolidation" paragraph of the part-out
page.
|
|
Author: | Soviet | Posted: | Sep 11, 2019 16:24 | Subject: | Re: Remark in validation process | Viewed: | 21 times | Topic: | Suggestions | |
|
| In Suggestions, BrickTobi writes:
| In Suggestions, Soviet writes:
| In Suggestions, BrickTobi writes:
| I miss the remarks by adding a new part to my invetory. if I have the part in
the invetory there is shown the old price but not the old (and new) remarks.
thanks and regards
tobias
|
Did you try this:
|
Thanks for your real
I mean the remark should be shown in this view:
|
I see. Well, the quickest way too see the remark would be to clikc the "view
item" link. It will show you the Remark do you don't have to go and search
for it separately.
|
|
Author: | BrickTobi | Posted: | Sep 11, 2019 16:00 | Subject: | Re: Remark in validation process | Viewed: | 25 times | Topic: | Suggestions | |
|
| In Suggestions, Soviet writes:
| In Suggestions, BrickTobi writes:
| I miss the remarks by adding a new part to my invetory. if I have the part in
the invetory there is shown the old price but not the old (and new) remarks.
thanks and regards
tobias
|
Did you try this:
|
Thanks for your real
I mean the remark should be shown in this view:
|
|
|
Author: | BrickTobi | Posted: | Sep 11, 2019 15:55 | Subject: | Remark in PartOut | Viewed: | 64 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| At the moment I have to search very time-consuming for the remarks when distributing
new parts, which are already in my invetory. Currently I always have to jump
into the inventory and take over the remark.
My suggestion would be to transfer the existing remarks already into the corresponding
fields. This function can also be optional (only if I want to transfer the old
remarks).
I would be very happy about this function.
Thanks and greetings
|
|
|
Author: | hpoort | Posted: | Sep 11, 2019 13:37 | Subject: | Re: New Relationship - Items Reference Each Other | Viewed: | 37 times | Topic: | Suggestions | |
|
| Nice idea.
Another examples:
and
There should be more of those pattern-set or pattern-minifig relations.
Hans-Peter
In Suggestions, axaday writes:
| I would like to propose a new relationship for the catalog. Items that reference
each other. Some examples are below.
and
===
and
===
and
===
and
===
and
|
|
|
Author: | axaday | Posted: | Sep 11, 2019 13:12 | Subject: | Re: New Relationship - Items Reference Each Other | Viewed: | 38 times | Topic: | Suggestions | |
|
| If you are scratching your head on one of those, try:
and
In Suggestions, axaday writes:
| I would like to propose a new relationship for the catalog. Items that reference
each other. Some examples are below.
and
===
and
===
and
===
and
===
and
|
|
|
Author: | axaday | Posted: | Sep 11, 2019 13:11 | Subject: | New Relationship - Items Reference Each Other | Viewed: | 103 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I would like to propose a new relationship for the catalog. Items that reference
each other. Some examples are below.
and
===
and
===
and
===
and
===
and
|
|
Author: | Teup | Posted: | Sep 11, 2019 09:02 | Subject: | Re: Can we have another order status? | Viewed: | 47 times | Topic: | Suggestions | |
|
| In Suggestions, edk writes:
| In Suggestions, Teup writes:
| In Suggestions, irdroid3 writes:
| It would be useful to have an Order status to go between "Received" and "Complete"
- something like "Queried" or "Querying" - for when I have started a communication
with the vendor - it's almost complete, but maybe a part missing?
Cheers, Ian
.
|
Yes, this has been suggested several times over the years and it would definitely
have been a useful feature. Also (maybe especially?) for me from a seller's
perspective, because I feel uncomfortable when I've asked the buyer a question
and I am not sure if they are waiting for their order or if they are aware that
I am asking a question first.
I'd call it "awaiting response". Maybe a dual one to make it clear who's
the one who should be responding But I think just one should've worked
too. Could be connected to the green dot notification in the upper right corner,
to the party who's supposed to respond.
Not assuming Bricklink will change anything, but perhaps we'll see it in
some future under a different management or something like that.
|
Then add.
invoiced
payment pending
payment in the mail
payment iniated
awaiting buyer response
|
Those mostly already exist in the interface - invoiced by the invoice icon, payment
pending by the grand total in regular letters, payment initiated by the grand
total in bold letters (but it's a bit cryptic.. interface could've been
better..).
|
|
Author: | edk | Posted: | Sep 11, 2019 08:32 | Subject: | Re: Can we have another order status? | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| In Suggestions, irdroid3 writes:
| It would be useful to have an Order status to go between "Received" and "Complete"
- something like "Queried" or "Querying" - for when I have started a communication
with the vendor - it's almost complete, but maybe a part missing?
Cheers, Ian
.
|
Yes, this has been suggested several times over the years and it would definitely
have been a useful feature. Also (maybe especially?) for me from a seller's
perspective, because I feel uncomfortable when I've asked the buyer a question
and I am not sure if they are waiting for their order or if they are aware that
I am asking a question first.
I'd call it "awaiting response". Maybe a dual one to make it clear who's
the one who should be responding But I think just one should've worked
too. Could be connected to the green dot notification in the upper right corner,
to the party who's supposed to respond.
Not assuming Bricklink will change anything, but perhaps we'll see it in
some future under a different management or something like that.
|
Then add.
invoiced
payment pending
payment in the mail
payment iniated
awaiting buyer response
|
|
Author: | Teup | Posted: | Sep 11, 2019 07:59 | Subject: | Re: Can we have another order status? | Viewed: | 47 times | Topic: | Suggestions | |
|
| In Suggestions, irdroid3 writes:
| It would be useful to have an Order status to go between "Received" and "Complete"
- something like "Queried" or "Querying" - for when I have started a communication
with the vendor - it's almost complete, but maybe a part missing?
Cheers, Ian
.
|
Yes, this has been suggested several times over the years and it would definitely
have been a useful feature. Also (maybe especially?) for me from a seller's
perspective, because I feel uncomfortable when I've asked the buyer a question
and I am not sure if they are waiting for their order or if they are aware that
I am asking a question first.
I'd call it "awaiting response". Maybe a dual one to make it clear who's
the one who should be responding But I think just one should've worked
too. Could be connected to the green dot notification in the upper right corner,
to the party who's supposed to respond.
Not assuming Bricklink will change anything, but perhaps we'll see it in
some future under a different management or something like that.
|
|
Author: | yorbrick | Posted: | Sep 11, 2019 07:55 | Subject: | Re: Can we have another order status? | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, irdroid3 writes:
| It would be useful to have an Order status to go between "Received" and "Complete"
- something like "Queried" or "Querying" - for when I have started a communication
with the vendor - it's almost complete, but maybe a part missing?
Cheers, Ian
.
|
For something so specific, why not use the order notes and leave it as "received"?
|
|
Author: | irdroid3 | Posted: | Sep 11, 2019 06:35 | Subject: | Can we have another order status? | Viewed: | 138 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be useful to have an Order status to go between "Received" and "Complete"
- something like "Queried" or "Querying" - for when I have started a communication
with the vendor - it's almost complete, but maybe a part missing?
Cheers, Ian
.
|
|
Author: | bb53904 | Posted: | Sep 11, 2019 04:58 | Subject: | Re: Inventory Change Request for Set 41187-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 23989pb03 Dark Blue Dragon Wing 13 x 8, Trans-Light Purple Trailing Edge (Extra)
Comments from Submitter:
I got 3 of this set and each came with an extra wing.
|
A bit tardy with this reply, but I just inventoried my set, and I also had the
extra Dragon Wing.
Thea
Always An Adventure!
|
|
Author: | randyf | Posted: | Sep 10, 2019 21:38 | Subject: | Re: Inventory Change Request for Part 88765pb03c01 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Melik83 writes:
| Please make changes to the following inventory: [P=88765pb03c01]
* Add 1 Part 88765pb03c01 Red Duplo Cars Sports Car (Lightning McQueen Piston Cup Pattern)
Comments from Submitter:
The item number should be 88765
|
I don't know what you are trying to do here, unfortunately, but you can't
add the same part to the inventory that is that part. This request will not be
accepted.
Cheers,
Randy
|
|
Author: | bb1474427 | Posted: | Sep 10, 2019 18:19 | Subject: | Inventory Change Request for Part 88765pb03c01 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [P=88765pb03c01]
* Add 1 Part 88765pb03c01 Red Duplo Cars Sports Car (Lightning McQueen Piston Cup Pattern)
Comments from Submitter:
The item number should be 88765
|
Author: | ElvisandBane | Posted: | Sep 10, 2019 16:35 | Subject: | Inventory Change Request for Set 41314-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 46212pb019 Trans-Clear Brick 1 x 2 x 5 without Side Supports with Star and Number '72' Pattern (Sticker) - Set 41314 (Counterpart)
|
|
Author: | paulvdb | Posted: | Sep 10, 2019 15:34 | Subject: | Re: Inventory Change Request for Set 76086-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, Ladyhawke74 writes:
| Please make changes to the following inventory:
* Add 2 Part 44225pb001a Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side A (Sticker) - Set 76086 (Counterpart)
* Add 2 Part 44225pb001b Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side B (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 3010pb274 Black Brick 1 x 4 with Grille and Red Headlights Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb083 Yellow Tile 1 x 3 with Red Gauges and Buttons Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb084 Yellow Tile 1 x 3 with Red Level Meter Pattern (Sticker) - Set 76086 (Counterpart)
|
Looks like the sticker is applied upside down on the image of 3010pb274.
Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched
between the two parts based on set images and instructions.
|
It also looks like technic half pins were left in the 44225 in both images.
|
|
Author: | paulvdb | Posted: | Sep 10, 2019 15:31 | Subject: | Re: Inventory Change Request for Set 76086-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Ladyhawke74 writes:
| Please make changes to the following inventory:
* Add 2 Part 44225pb001a Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side A (Sticker) - Set 76086 (Counterpart)
* Add 2 Part 44225pb001b Light Bluish Gray Technic Rotation Joint Disk with Pin and 3L Liftarm Thick with Vents and Red Rectangle Pattern Side B (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 3010pb274 Black Brick 1 x 4 with Grille and Red Headlights Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb083 Yellow Tile 1 x 3 with Red Gauges and Buttons Pattern (Sticker) - Set 76086 (Counterpart)
* Add 1 Part 63864pb084 Yellow Tile 1 x 3 with Red Level Meter Pattern (Sticker) - Set 76086 (Counterpart)
|
Looks like the sticker is applied upside down on the image of 3010pb274.
Stickers are also wrong on 44225pb001a and 44225pb001b. Stickers should be switched
between the two parts based on set images and instructions.
|
|
Author: | samsam2 | Posted: | Sep 10, 2019 10:51 | Subject: | Inventory Change Request for Set 7477-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6573pb001R Dark Bluish Gray Technic, Gear Differential, 24-16 Teeth with Lime Containers Pattern Model Right Side (Sticker) - Set 7477 (Counterpart)
|
Author: | msSquirrel | Posted: | Sep 10, 2019 02:43 | Subject: | Inventory Change Request for Set 10756-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 44567b Blue Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove
* Delete 1 Part 44567 Blue Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type)
|
|
Author: | taxan | Posted: | Sep 9, 2019 23:24 | Subject: | Re: Inventory Change Request for Set 8641-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, stergann writes:
| Please make changes to the following inventory:
* Add 1 Part 6091pb017 Orange Brick, Modified 1 x 2 x 1 1/3 with Curved Top with '2' on Checkered Background Pattern (Sticker) - Set 8641 (Counterpart)
|
Based on instructions, set images and image of the stickersheet I believe that
the wrong sticker is applied on [p=6091pb017]
This is the same sticker that is also on [p=3069bpb085]
Looking at the sticker sheet it is the second sticker from the
left in the top row. The correct sticker should be the one all the way to the
right on the top row and that sticker also partially goes on a black 1x1 plate.
So a stickered assembly should be added to the catalog for that sticker.
|
After checking the instructions a say it going on to the 1x3 plate to.
So a 3 way sticker assemble is needed here.
|
|
Author: | Teup | Posted: | Sep 9, 2019 16:51 | Subject: | Re: More stockrooms! | Viewed: | 47 times | Topic: | Suggestions | |
|
| In Suggestions, calsbricks writes:
| In Suggestions, Teup writes:
| In Suggestions, calsbricks writes:
| We won't be signing up for xp either - it isn't aimed at our type of
store - its target is a large one - the 'Soccer Moms' so to speak who
want a set for little Johnny for xmas and do not need the complications of Bricklink
to hamper them.
|
(...)
| Apparently xp requires Instant Checkout (not a problem for some), also requires
Paypal for Marketplaces (Again not a problem for some) but little else is known
about it.
|
And this is where it goes totally wrong. On the one hand, they seem to aim at
the broad casual consumer market, on the other hand, they force a highly specific
online-business-insiders-only payment method. If I would go to the local supermarket
and ask random people if they have bought something online last week, lots of
them are going to say "yes". If I ask them if they used PayPal, pretty much all
of them are going to respond "what's PayPal?"
And then I haven't even touched on PayPal's plan to dramatically increase
transaction fees by next month, which ruins their competitiveness compared to
other payment methods (but they are trying to circumvent the free market principle
by forcing sellers not to disclose the fees to buyers in as many countries as
possible, and encouraging the buyers to ask for PayPal because it is "free")
If they will implement a relevant payment method, then I will participate in
XP (for the Dutch market, the 4th largest country on Bricklink, this is iDeal).
If they don't, I won't. I'm done trying to make Bricklink see reason.
iDeal is one of the main reasons that I set up my own webshop, and now that I
have it, I don't really care what Bricklink does anymore. If they are not
going to add iDeal, that's just going to be more Dutch consumers for me in
my webshop
|
Hi Teup
Never heard of Ideal - is that Dutch only? Irrespective of that the business
model of xp does not suit our store and we wouldn't adopt it whatever happens.
We are not into selling large one-off sets at bargain prices - ours is a part
shop from top to bottom. Our orders average several hundred items and over 50
lots - that isn't going to be bought by a google search result which is what
we believe BL are trying to bring about. Instant checkout doesn't' work
for our store either and with over 40,000 items without dimensions in the catalogue
it is fair to say, probably never will - it is not designed well around shipping
methods and was not built to be adaptable (zip code pricing in the USA - The
largest market on BL), volume and weight based in the UK and most of Europe.
We have 14 different box sizes 3 large letters, and 11 small parcels, we never
ship a medium parcel as that is too costly so we are using multiple small parcels
to deal with weights over 2Kg and yes I know this could be set up but what a
hassle a different delivery method for each box type (each box has a different
tare).
We also have no concept of Bricklink dealing with our funds by way of Marketplace.
Far too many things against it for us to even consider it,((we know they have
claimed they are not into that, but who knows what might happen if we all give
them the right to do that)). but then it might suit some - that will only be
found out as and when they launch it, as unfortunately no communications is the
norm for the site - so no one will know what it is about til they launch it and
based on previous launches it will be some time before it would be 'bug free'
so to speak.
IC, in our view, needed to be regionalised and much more flexible in its design.
It works for some and that is great, and not for others, which is a shame, but
that is how they have done it. No talking, no discussion, no customer agreement,
here it is - if you don't like it tough, - that is what you are getting.
And the funny thing is BO launched with it and it is much smoother over there
and far fewer complaints about missing bits.
I can say without reservation that we will not be adopting xp at any time.
|
I see, I think all in all it's a fair bottom line that this is just a plan
that was cooked up at someone's desk who just figured this would be kinda
cool - ignoring the massive wealth of knowledge, needs, suggestions, etc etc
that the community can offer, if you are looking for inspiration of what direction
to take Bricklink.
IDeal is Dutch only, yes. It's not a 3rd party by the way, it's simply
the default online interface for bank transfer, which is the preferred (and free!)
payment method. So every Dutch citizen has it, it does not require setting up
an account (other than a bank account), it does not require anything, all people
readily have it and can use it very easily. The transaction costs that I pay
for it in my webshop are €0.29 fixed price. Way cheaper than PayPal, and for
larger businesses I think it's virtually free.
That's my example of Bricklink doing its own thing without caring to listen,
and I am sure a lot of us have such examples. That's why I prefer Bricklink
just keeps on sleeping and not come up with ideas. They just don't seem to
be thought through in a professional way. An admin recently mentioned that Bricklink
is considering prices here to be really low. If anything, a bit too low. What
do you think will happen with XP where the individual store is all but taken
out of the equation? Even more downward pressure on prices. If you want higher
prices, you need to give stores space to profile themselves as unique individuals,
instead of stripping all that away and comparing them by price only.
I'm not talking about what I want here, I just see that Bricklink
wishes prices to be higher and at the same time develop something which will
push prices down. The MOC shop, the Chinese translation if anyone remembers that,
Bricklink XP, and - according to some of the members - the AFOL Designer program:
Just random side projects that weren't thought through and don't have
any consistent vision behind them in terms of what direction to take Bricklink.
Well enough talk about Bricklink from me for now, I'm back to order picking
and I don't want to be framed like someone who just complains. Alot about
Bricklink is pretty awesome. I just prefer it to be left alone if the alternative
is random changes that are not serious and not professional. And I have some
good hope it will. XP is not here yet, so so far everything is just fine and
business as usual
|
|
Author: | Teup | Posted: | Sep 9, 2019 16:30 | Subject: | Re: More stockrooms! | Viewed: | 29 times | Topic: | Suggestions | |
|
| In Suggestions, runner.caller writes:
| | In Suggestions, Teup writes:
And then I haven't even touched on PayPal's plan to dramatically increase
transaction fees by next month,
|
WHAT!? Are you talking the 2.2% to 2.9%?
|
Nope, the 3% to 5%
|
|
Author: | popsicle | Posted: | Sep 9, 2019 15:17 | Subject: | Re: Either a bonafide brain-fart, or a seizure... | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, BricxaLot writes:
| The "Reverse want list" is a very nice idea.
I guess, especially, buyers with a lot of different wanted lists would be interested
in to opt-in, if they are trying to save some time gathering their parts from
too many stores out there...
|
+1
|
In Suggestions, popsicle writes:
| Wayne's post and others like it, https://www.bricklink.com/message.asp?ID=1150409
brings to mind an idea that briefly visited my headspace some time ago:
A type of reverse want list. That is, a way that sellers could peruse the current
want lists to specific buyer's needs, to then as a seller, proactively engage
members like Wayne with offers on items they have on their want list.
Kinda like amping-up the want list and selling process, by getting the sellers
more involved in increasing their sales by actually selling
It's just a rough draft of an idea. Limitations, restriction and other refinements
of the idea, expected.
But hey, BL shot-callers, it speaks directly to upping the sales numbers!
-Cory
|
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|