Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | normann1974 | Posted: | Aug 10, 2019 09:10 | Subject: | Re: Help with inventory | Viewed: | 25 times | Topic: | Inventories | |
| I do think I'm capable of creating the parts/minifigs/inventory correctly,
but as previously stated, I don't know what names I should use for the parts
and minifigs, and I can't supply correct weight of all of them, neither can
I supply professional photos. I need help with that.
BTW, I found the hat. It's part 17349 (previously only been released with
print, e.g. ).
/Jan
|
Author: | normann1974 | Posted: | Aug 10, 2019 08:45 | Subject: | Re: Help with inventory | Viewed: | 26 times | Topic: | Inventories | |
| Here's the right other side of Peter Pettigrew's head (the first two
images show the same side).
|
|
|
Author: | normann1974 | Posted: | Aug 10, 2019 08:43 | Subject: | Help with inventory | Viewed: | 89 times | Topic: | Inventories | Status: | Open | |
| Hello
After having been on BL for a couple of years, both as a buyer and seller and
submitter to the catalog, I wanted to take up the challenge of making an inventory
for a set, and I chose set because I just bought it. At this point,
I have only submitted the sticker sheet to the catalog, and I'm stuck with
10 parts that seem to be new (their PCCs don't exist on BrickLink and I can't
find them through search). I have a few questions for the upcoming work.
1) Should I leave it to a professional to do all this work? I'm thinking
that I can't provide professional pictures of the new parts and I can't
name the remaining parts or supply weight for them.
2) If the answer to 1) is "no", could someone please help me identify the remaining
10 parts or provide me with good names for the parts so I can add them to the
catalog? What do I do with the weight of the parts? I don't have a weight
with the precision needed.
Attached are pictures of the 10 new parts.
/Jan
|
|
|
Author: | normann1974 | Posted: | Aug 2, 2019 18:53 | Subject: | Re: Inventory Change Request for Set 9398-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 1 Part 62531pb031R White Technic, Panel Curved 11 x 3 with Filler Cap and Black and Orange Rhombuses and '4X4' Pattern Model Right Side (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87080pb049 Orange Technic, Panel Fairing # 1 Small Smooth Short, Side A with XXX Pattern (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87086pb049 Orange Technic, Panel Fairing # 2 Small Smooth Short, Side B with XXX Pattern (Sticker) - Set 9398 (Counterpart)
Comments from Submitter:
Only one counterpart is now missing, but the last sticker on the set I have is applied incorrectly.
|
Admin, please correct the name of these two parts (I didn't know what to
write).
/Jan
|
I don't know if we should have parts in the catalog with XXX content in them.
|
Apparently they were accepted into the catalogue before an admin could change
them.
/Jan
|
Someone fixed it.
/Jan
|
|
Author: | normann1974 | Posted: | Aug 2, 2019 17:33 | Subject: | Re: Inventory Change Request for Set 9398-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 1 Part 62531pb031R White Technic, Panel Curved 11 x 3 with Filler Cap and Black and Orange Rhombuses and '4X4' Pattern Model Right Side (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87080pb049 Orange Technic, Panel Fairing # 1 Small Smooth Short, Side A with XXX Pattern (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87086pb049 Orange Technic, Panel Fairing # 2 Small Smooth Short, Side B with XXX Pattern (Sticker) - Set 9398 (Counterpart)
Comments from Submitter:
Only one counterpart is now missing, but the last sticker on the set I have is applied incorrectly.
|
Admin, please correct the name of these two parts (I didn't know what to
write).
/Jan
|
I don't know if we should have parts in the catalog with XXX content in them.
|
Apparently they were accepted into the catalogue before an admin could change
them.
/Jan
|
|
Author: | normann1974 | Posted: | Aug 2, 2019 14:39 | Subject: | Re: Inventory Change Request for Set 9398-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 1 Part 62531pb031R White Technic, Panel Curved 11 x 3 with Filler Cap and Black and Orange Rhombuses and '4X4' Pattern Model Right Side (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87080pb049 Orange Technic, Panel Fairing # 1 Small Smooth Short, Side A with XXX Pattern (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87086pb049 Orange Technic, Panel Fairing # 2 Small Smooth Short, Side B with XXX Pattern (Sticker) - Set 9398 (Counterpart)
Comments from Submitter:
Only one counterpart is now missing, but the last sticker on the set I have is applied incorrectly.
|
Admin, please correct the name of these two parts (I didn't know what to
write).
/Jan
|
|
Author: | normann1974 | Posted: | Aug 2, 2019 14:38 | Subject: | Inventory Change Request for Set 9398-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 62531pb031R White Technic, Panel Curved 11 x 3 with Filler Cap and Black and Orange Rhombuses and '4X4' Pattern Model Right Side (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87080pb049 Orange Technic, Panel Fairing # 1 Small Smooth Short, Side A with XXX Pattern (Sticker) - Set 9398 (Counterpart)
* Add 1 Part 87086pb049 Orange Technic, Panel Fairing # 2 Small Smooth Short, Side B with XXX Pattern (Sticker) - Set 9398 (Counterpart)
Comments from Submitter:
Only one counterpart is now missing, but the last sticker on the set I have is applied incorrectly.
|
|
Author: | normann1974 | Posted: | Aug 1, 2019 11:38 | Subject: | Re: 928 wrong plate? | Viewed: | 41 times | Topic: | Catalog | |
| In Catalog, legoman77 writes:
| In Catalog, normann1974 writes:
| When I got set as a child, I remember clearly it had one plate of wrong
size in it (different from the one shown in the instructions), and from my recollection
it was the plate that held the control patterned slopes (it should be a 4 x 10
plate). The plate in my set was either 2 studs too long or too short, but I don't
remember which. Unfortunately, I switched the plate to a correct one long time
ago, so I can't prove anything about this today.
Does anyone else remember something like this?
/Jan
|
Could you have had 497?
|
No, my instructions say 928. But 497 doesn't seem to change anything with
respect to these plates.
/Jan
|
|
Author: | normann1974 | Posted: | Aug 1, 2019 10:58 | Subject: | 928 wrong plate? | Viewed: | 117 times | Topic: | Catalog | Status: | Open | |
| When I got set as a child, I remember clearly it had one plate of wrong
size in it (different from the one shown in the instructions), and from my recollection
it was the plate that held the control patterned slopes (it should be a 4 x 10
plate). The plate in my set was either 2 studs too long or too short, but I don't
remember which. Unfortunately, I switched the plate to a correct one long time
ago, so I can't prove anything about this today.
Does anyone else remember something like this?
/Jan
|
|
Author: | normann1974 | Posted: | Jul 25, 2019 11:32 | Subject: | Re: Old (classic) light gray | Viewed: | 69 times | Topic: | Colors | |
| In Colors, RecycledBrick writes:
| | Does anyone else out there recall issues with Lego having off color batches on old light grays in
the past like they have trouble with now on the new light bluish grays and yellows?
|
I have seen 2 different shades of Light Gray and not all of it is yellowing or
age but could be. Occasionally if I have a lot of the off color I will list
with a note but unless it is a piece I want I usually put them in the donate
pile.
|
I'm having the same problem. I most often see this issue with part ,
technic pins and gears. Example image attached (about 50% of all parts 3651 are
"yellowish").
/Jan
|
|
|
Author: | normann1974 | Posted: | Jul 19, 2019 12:32 | Subject: | Re: Inventory Change Request for Set 9305-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| | There you go.
Cheers,
Randy
|
Thanks, but shouldn't it be a note on the set instead of a note on the inventory?
/Jan
|
|
Author: | normann1974 | Posted: | Jul 19, 2019 10:04 | Subject: | Re: Inventory Change Request for Set 9305-1 | Viewed: | 42 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, normann1974 writes:
| Yesterday, when I checked the box contents, I verified that all the bricks in the box
and bags are exactly the ones in the current set inventories for the four sets, so the
total number of bricks is 174. The box label says 177, I don't know why.
|
I was also wondering this when I was going through the sets yesterday. Here are
the piece counts listed on the boxes of the constituent sets:
4600-1 - 23 pieces (BrickLink has 22 Parts, 1 Minifig ... seems right)
4604-1 - 20 pieces (BrickLink has 16 Parts, 2 Minifigs ... seems not right)
4606-1 - 40 pieces (BrickLink has 38 Parts, 2 Minifigs ... seems right)
4609-1 - 94 pieces (BrickLink has 90 Parts, 3 Minifigs ... seems not right)
When the piece counts listed on the boxes of the constituent sets are all added
together, you get 177 pieces which is the number listed on the box of 9305-1.
So the current BrickLink inventories do not match up in all cases, and I am trying
to figure out why.
I am going to look into this further later before moving ahead with the change
requests.
Cheers,
Randy
|
I found the two rubber bands that I previously stated were missing as extras.
They are put around the winch assemblies.
/Jan
|
Thank you for checking this for me, Jan!
Cheers,
Randy
|
Could a note be added to the set with a reference to the four sets that it contains?
/Jan
|
|
Author: | normann1974 | Posted: | Jul 18, 2019 08:19 | Subject: | Re: Inventory Change Request for Set 9305-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, normann1974 writes:
| Yesterday, when I checked the box contents, I verified that all the bricks in the box
and bags are exactly the ones in the current set inventories for the four sets, so the
total number of bricks is 174. The box label says 177, I don't know why.
|
I was also wondering this when I was going through the sets yesterday. Here are
the piece counts listed on the boxes of the constituent sets:
4600-1 - 23 pieces (BrickLink has 22 Parts, 1 Minifig ... seems right)
4604-1 - 20 pieces (BrickLink has 16 Parts, 2 Minifigs ... seems not right)
4606-1 - 40 pieces (BrickLink has 38 Parts, 2 Minifigs ... seems right)
4609-1 - 94 pieces (BrickLink has 90 Parts, 3 Minifigs ... seems not right)
When the piece counts listed on the boxes of the constituent sets are all added
together, you get 177 pieces which is the number listed on the box of 9305-1.
So the current BrickLink inventories do not match up in all cases, and I am trying
to figure out why.
I am going to look into this further later before moving ahead with the change
requests.
Cheers,
Randy
|
I found the two rubber bands that I previously stated were missing as extras.
They are put around the winch assemblies.
/Jan
|
|
|
Author: | normann1974 | Posted: | Jul 15, 2019 11:36 | Subject: | Re: Inventory Change Request for Set 9305-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| Here's the slope with bottom tube in Dark Gray.
/Jan
|
|
|
Author: | normann1974 | Posted: | Jul 15, 2019 11:36 | Subject: | Inventory Change Request for Set 9305-1 | Viewed: | 69 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Set 4606-1 Aqua Res-Q Transport
* Delete 1 Set 4609-1 Fire Attack Team
* Delete 1 Set 4604-1 Police Copter
* Delete 1 Set 4604-1 Police Copter
* Add 1 Part 4083 Black Bar 1 x 4 x 2 with Studs
* Add 1 Part 30086 Black Boat, Rubber Raft, Small
* Add 1 Part 30621 Black Brick, Modified 2 x 12 with 2 Side Pins and 2 End Pins, Technic Holes, and 4W Flared End
* Add 1 Part 30248 Black Helicopter Sled Rails 12 x 6
* Add 1 Part 30396 Black Hinge 1 x 2 Locking with 2 Fingers and Towball Socket
* Add 2 Part x277 Black Hinge 1 x 4 Triangle with Two Pins, Locking 1 Finger
* Add 3 Part 30625 Black Hinge Panel 1 x 4 x 3 2/3 with 6 holes, 2 studs on top, Locking 2 Fingers
* Add 1 Part 3835 Black Minifigure, Utensil Axe
* Add 2 Part 4477 Black Plate 1 x 10
* Add 1 Part 30644 Black Propeller 2 Blade 4 x 22
* Add 1 Part 4617 Black Propeller 3 Blade 5.5 Diameter
* Add 1 Part 30180 Black Slope 45 10 x 2 x 2 Double
* Add 1 Part x127c11 Black String with End Studs 11L Overall (8.6 cm)
* Add 4 Part 30646a Black Support 2 x 2 x 8 with Grooves and Top Peg, Lattice on 2 Sides
* Add 1 Part 2376 Black Tile, Round 2 x 2 with Lifting Ring Thin
* Add 4 Part 30648 Black Tire 24 x 14 Shallow Tread
* Add 16 Part 30391 Black Tire 30.4 x 14 Offset Tread
* Add 1 Part 30642 Black Vehicle, Base 4 x 14 x 2 1/3
* Add 1 Part 30632 Black Vehicle, Grille 6 x 4 x 3 with Two Pins and Two Pin Holes
* Add 1 Part 30626 Black Vehicle, Spoiler 3 x 4 x 6
* Add 2 Part 30663 Black Vehicle, Steering Wheel Small, 2 Studs Diameter
* Add 1 Part 30322 Blue Antenna Whip with Flag
* Add 1 Part 3003 Blue Brick 2 x 2
* Add 1 Part 4349 Blue Minifigure, Utensil Loudhailer / Megaphone / SW Blaster
* Add 1 Part 2376 Blue Tile, Round 2 x 2 with Lifting Ring Thin
* Add 1 Part 2412b Chrome Silver Tile, Modified 1 x 2 Grille with Bottom Groove / Lip
* Add 3 Part 71137b Chrome Silver Vehicle, Exhaust Pipe with Technic Pin
* Add 1 Part 2456 Dark Gray Brick 2 x 6
* Add 1 Part 30645 Dark Gray Brick, Modified 12 x 12 Base
* Add 2 Part 30395 Dark Gray Hook with Towball
* Add 1 Part 4000 Dark Gray Ladder 16 x 4 with Semi-Circular Pivot
* Add 3 Part 3962b Dark Gray Minifigure, Utensil Radio with Extended Handle
* Add 2 Part 6583 Dark Gray Plate, Modified 1 x 6 with Train Wagon End
* Add 1 Part 3678b Dark Gray Slope 65 2 x 2 x 2 with Bottom Tube
* Add 1 Part 30636c01 Dark Gray String Reel 1 x 4 x 2 Complete with String and Dark Gray Hook with Towball
* Add 1 Part 30643 Dark Gray Vehicle, Base 4 x 10 x 1 1/3 with 8 x 2 Recessed Center, 4 Pins, Technic Holes
* Add 1 Part 3069bpx7 Green Tile 1 x 2 with Groove with 100 Dollar Bill Money Pattern
* Add 2 Part 4202 Light Gray Brick 4 x 12
* Add 1 Part 30387 Light Gray Hinge Brick 1 x 4 Locking with 1 Finger Vertical End and 2 Fingers Vertical End
* Add 1 Part 30388 Light Gray Hinge Brick 1 x 6 Locking with 1 Finger Vertical End and 2 Fingers Vertical End
* Add 1 Part 4360 Light Gray Minifigure, Utensil Camera with Side Sight (Space Gun)
* Add 1 Part 4349 Light Gray Minifigure, Utensil Loudhailer / Megaphone / SW Blaster
* Add 1 Part x93 Light Gray Minifigure, Utensil Tool Pipe Wrench
* Add 1 Part 32324 Light Gray Technic, Brick 4 x 4 Open Center
* Add 1 Part 30632 Light Gray Vehicle, Grille 6 x 4 x 3 with Two Pins and Two Pin Holes
* Add 4 Part 30285 Light Gray Wheel 18mm D. x 14mm
* Add 1 Part 3003 Red Brick 2 x 2
* Add 1 Part 30619 Red Cockpit 6 x 6 x 5 with Hinge
* Add 1 Part 30639 Red Container, Box Open Ended 4 x 4 x 4 with 1 Locking Hinge Finger on Each End
* Add 2 Part 30387 Red Hinge Brick 1 x 4 Locking with 1 Finger Vertical End and 2 Fingers Vertical End
* Add 1 Part 5 Red Ladder Holder for Ladder 16 x 4 with Semi-Circular Pivot
* Add 1 Part 3039 Red Slope 45 2 x 2
* Add 1 Part 30636c02 Red String Reel 1 x 4 x 2 Complete with String and Light Gray Hose Nozzle T Handle
* Add 2 Part 30516c02 Red Turntable 4 x 4 Locking Grooved Base with Black Top
* Add 1 Part 30642 Red Vehicle, Base 4 x 14 x 2 1/3
* Add 1 Part 30622 Red Vehicle, Grille 1 x 4 with Two Pins
* Add 1 Part 30620 Red Vehicle, Trailer Base 8 x 30 x 3 1/3
* Add 1 Part 30633px3 Trans-Black Windscreen 4 x 6 x 4 Canopy with Hinge and Flames Headlights Pattern
* Add 1 Part 30633pb04 Trans-Black Windscreen 4 x 6 x 4 Canopy with Hinge and Res-Q Pattern
* Add 3 Part 40996 Trans-Dark Blue Brick, Modified 1 x 4 with Sloped Ends and 2 Top Studs
* Add 3 Part 3062b Trans-Dark Blue Brick, Round 1 x 1 Open Stud
* Add 1 Part 30650 Trans-Dark Blue Panel 2 x 8 x 8
* Add 1 Part 6238 Trans-Dark Blue Windscreen 4 x 4 x 1
* Add 1 Part 30633px2 Trans-Dark Blue Windscreen 4 x 6 x 4 Canopy with Hinge and White Star and Vents Pattern
* Add 1 Part 30639 Trans-Light Blue Container, Box Open Ended 4 x 4 x 4 with 1 Locking Hinge Finger on Each End
* Add 1 Part 6126 Trans-Light Blue Wave Rounded with Base Pins (Castle Dragon Flame, Seaweed, Water)
* Add 1 Part 40996 Trans-Neon Green Brick, Modified 1 x 4 with Sloped Ends and 2 Top Studs
* Add 1 Part 40996 Trans-Neon Orange Brick, Modified 1 x 4 with Sloped Ends and 2 Top Studs
* Add 2 Part 3062b Trans-Neon Orange Brick, Round 1 x 1 Open Stud
* Add 3 Part 3941 Trans-Neon Orange Brick, Round 2 x 2 with Axle Hole
* Add 3 Part 6126 Trans-Neon Orange Wave Rounded with Base Pins (Castle Dragon Flame, Seaweed, Water)
* Add 2 Part 2486 White Bar 1 x 8 x 2
* Add 1 Part 3010pb021 White Brick 1 x 4 with Octan Pattern
* Add 2 Part 3003 White Brick 2 x 2
* Add 1 Part 4729 White Brick, Modified 2 x 2 No Studs, Top Pin
* Add 1 Part 30619 White Cockpit 6 x 6 x 5 with Hinge
* Add 2 Part 3942c White Cone 2 x 2 x 2 - Open Stud
* Add 1 Part 30396 White Hinge 1 x 2 Locking with 2 Fingers and Towball Socket
* Add 1 Part 3900 White Minifigure, Utensil Signal Paddle
* Add 2 Part 4286 White Slope 33 3 x 1
* Add 1 Part 3039px4 White Slope 45 2 x 2 with Buttons and 15.00 Pattern
* Add 1 Part 6239px1 White Tail Shuttle with Police Blue Checkered Pattern
* Add 2 Part 3701 White Technic, Brick 1 x 4 with Holes
* Add 1 Part 32324 White Technic, Brick 4 x 4 Open Center
* Add 1 Part 3068px4 White Tile 2 x 2 with Gauges Pattern
* Add 1 Part 30647pb05 White Vehicle, Fairing 1 x 4 Side Flaring Intake with Two Pins and Firefighter Pattern Left
* Add 1 Part 30647pb04 White Vehicle, Fairing 1 x 4 Side Flaring Intake with Two Pins and Firefighter Pattern Right
* Add 1 Part 30647pb01 White Vehicle, Fairing 1 x 4 Side Flaring Intake with Two Pins and Police Blue Checkered Pattern Left
* Add 1 Part 30647pb02 White Vehicle, Fairing 1 x 4 Side Flaring Intake with Two Pins and Police Blue Checkered Pattern Right
* Add 1 Part 30622 White Vehicle, Grille 1 x 4 with Two Pins
* Add 1 Part 30626 White Vehicle, Spoiler 3 x 4 x 6
* Add 1 Part 30640 White Vehicle, Steering Wheel Holder 2 x 2
* Add 10 Part 30285 White Wheel 18mm D. x 14mm
* Add 1 Part 3003 Yellow Brick 2 x 2
* Add 1 Part 30237 Yellow Brick, Modified 1 x 2 with Vertical Clip
* Add 1 Part 30619 Yellow Cockpit 6 x 6 x 5 with Hinge
* Add 2 Part 30180 Yellow Slope 45 10 x 2 x 2 Double
* Add 1 Part 30263 Yellow Vehicle, Trailer Base 6 x 12 x 1 1/3
* Add 6 Part 30285 Yellow Wheel 18mm D. x 14mm
* Add 1 Minifig js001 Fireman in Hat #01
* Add 1 Minifig js007 Fireman in Hat #07
* Add 1 Minifig js028 Jack Stone - Black Jacket, Blue Legs
* Add 1 Minifig js013 Jack Stone - Black Jacket, Blue Legs, Blue Vest
* Add 1 Minifig js002 Jack Stone - Blue Jacket, Blue Pants, Gray Shirt
* Add 1 Minifig js016 Police - Blue Legs, Black Jacket, Black Cap with Star
* Add 1 Minifig js005 Police - Blue Legs, Black Jacket, Blue Helmet (Female)
* Add 1 Minifig js010 Res-Q - Closed Faced Helmet
Comments from Submitter:
Discussion can be found here:
https://www.bricklink.com/message.asp?ID=1149096
The only changes made from the current inventory is that the four sets have been broken, 3678a has been changed to 3678b (yes, this will be the first set to contain 3678b in DG) and all extras have been removed. Yesterday, when I checked the box contents, I verified that all the bricks in the box and bags are exactly the ones in the current set inventories for the four sets, so the total number of bricks is 174. The box label says 177, I don't know why.
|
|
Author: | normann1974 | Posted: | Jul 7, 2019 11:31 | Subject: | Inventory Change Request for Set 79101-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 53451 Black Barb / Claw / Horn - Small (Extra)
* Change 1 Part Black 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Regular to Alternate} {match ID 1 to 1}
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {Alternate to Regular} {match ID 1 to 1}
* Change 1 Part Dark Bluish Gray {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
Comments from Submitter:
Found these variants and extra extras during part out.
|
|
Author: | normann1974 | Posted: | Jun 17, 2019 18:02 | Subject: | Inventory Change Request for Set 7725-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 4181pb061 Red Red Door 1 x 4 x 5 Train Left with White 'DSB 7725' Pattern (Sticker) - Set 7725 (Counterpart)
* Add 3 Part 4182pb061 Red Red Door 1 x 4 x 5 Train Right with White 'DSB 7725' Pattern (Sticker) - Set 7725 (Counterpart)
|
Author: | normann1974 | Posted: | Jun 15, 2019 16:32 | Subject: | Other counterparts for set 7725-1? | Viewed: | 53 times | Topic: | Catalog | Status: | Open | |
|
Will you accept other counterparts (stickered doors) for this set? The sticker
sheet comes with many different railway names, and I have doors with "DSB" stickers.
/Jan
|
Author: | normann1974 | Posted: | Jun 10, 2019 14:09 | Subject: | Inventory Change Request for Set 7937-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4032b Yellow Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 6)
* Change 2 Part Yellow {4032b Plate, Round 2 x 2 with Axle Hole - X Opening to 4032 Plate, Round 2 x 2 with Axle Hole} {match ID 0 to 6}
Comments from Submitter:
I have just checked my own collection where I have this set that was never mixed with other bricks. Both parts were 4032.
|
|
Author: | normann1974 | Posted: | May 31, 2019 18:39 | Subject: | Inventory Change Request for Set 75202-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 75c09 Black Hose, Rigid 3mm D. 9L / 7.2cm (Extra)
* Change {1 to 2} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Change {1 to 2} Part Light Bluish Gray 85861 Plate, Round 1 x 1 with Open Stud (Extra)
Comments from Submitter:
I just parted out this set and found 12 pins, 10 plates and 3 hoses.
|
|
Author: | normann1974 | Posted: | May 27, 2019 18:21 | Subject: | Inventory Change Request for Set 7240-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Red 3754pb19 Brick 1 x 6 x 5 with Fire Logo and White 'FEUERWEHR' Pattern (Stickers) - Set 7240 {Alternate to Counterpart}
Comments from Submitter:
This part is a counterpart, not an alternate.
|
|
Author: | normann1974 | Posted: | May 27, 2019 18:19 | Subject: | Inventory Change Request for Set 8420-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 45 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Alternate) (match ID 99)
* Add 6 Part 32002 Dark Bluish Gray Technic, Pin 3/4 (Alternate) (match ID 99)
* Change 41 Part Black 2780 Technic, Pin with Friction Ridges Lengthwise WITH Center Slots {match ID 0 to 99}
* Change 10 Part Dark Bluish Gray 32002 Technic, Pin 3/4 {match ID 0 to 99}
Comments from Submitter:
These changes corresponds to the correction sheet posted as instruction image: 4 DGB short pins are replaced with 4 black long pins.
|
|
Author: | normann1974 | Posted: | May 27, 2019 12:08 | Subject: | Re: Inventory Change Request for Set 7993-1 | Viewed: | 10 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 1 Part 4495b Green Flag 4 x 1 Wave Right (match ID 3)
* Add 1 Part 4495b Red Flag 4 x 1 Wave Right (match ID 4)
* Change 1 Part Green 4495a Flag 4 x 1 Wave Left {match ID 0 to 3}
* Change 1 Part Red 4495a Flag 4 x 1 Wave Left {match ID 0 to 4}
Comments from Submitter:
Unboxing here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=356612
|
For future reference (lightened up screenshot from http://www.brickshelf.com/cgi-bin/gallery.cgi?i=3595778).
/Jan
|
|
|
Author: | normann1974 | Posted: | May 27, 2019 12:06 | Subject: | Inventory Change Request for Set 7993-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4495b Green Flag 4 x 1 Wave Right (match ID 3)
* Add 1 Part 4495b Red Flag 4 x 1 Wave Right (match ID 4)
* Change 1 Part Green 4495a Flag 4 x 1 Wave Left {match ID 0 to 3}
* Change 1 Part Red 4495a Flag 4 x 1 Wave Left {match ID 0 to 4}
Comments from Submitter:
Unboxing here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=356612
|
|
Author: | normann1974 | Posted: | May 25, 2019 11:05 | Subject: | Inventory Change Request for Set 60054-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 14520 Dark Bluish Gray Brick, Modified 2 x 4 - 1 x 4 with 2 Recessed Studs and Thin Side Arches (Alternate) (match ID 3)
* Add 1 Part 3794b Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 52038 Brick, Modified 2 x 4 - 1 x 4 with 2 Recessed Studs and Thick Side Arches {match ID 0 to 3}
Comments from Submitter:
Found these variants during part-out. I've double-checked the number printed on the 14520 part.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|