Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | BrickCastle60 | Posted: | Jun 20, 2019 03:39 | Subject: | Inventory not excist of 75890, 70673... | Viewed: | 52 times | Topic: | Inventories | Status: | Open | |
|
| Hi,
when do you want to add the inventories from the sets
75890 listed in February 2019
70673 listed in May 2019
and other sets?
We wanted to put the parts in our store...
Thanks, Tanja
|
Author: | axaday | Posted: | Jun 15, 2019 23:47 | Subject: | Re: Inventory Pending Approval (?) Toy Story: 4 | Viewed: | 22 times | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| Been waiting for Inventory of these Toy Story 4 .
Can't part out since inventory still not done.
Sets available since end of april...
No part to sell,no money coming in for me or Bricklink.
|
I did another one this afternoon. Maybe it is the one you need.
|
|
Author: | randyf | Posted: | Jun 15, 2019 22:35 | Subject: | Re: Inventory Pending Approval (?) Toy Story: 4 | Viewed: | 36 times | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| Been waiting for Inventory of these Toy Story 4 .
Can't part out since inventory still not done.
Sets available since end of april...
No part to sell,no money coming in for me or Bricklink.
|
BrickLink relies on volunteers to contribute inventories to the site. If someone
does not volunteer to do a given inventory, then that inventory doesn't get
done. Normally, sellers who are interested in parting out sets that are not yet
inventoried will do the inventories because it behooves them to do so. If you
are waiting on a given inventory that has not been done and have the set on hand,
I would be more than happy to walk you through the process of getting an inventory
into the system for not only you, but for everyone, to use.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Jun 15, 2019 17:38 | Subject: | Re: Inventory Pending Approval (?) Toy Story: 4 | Viewed: | 33 times | Topic: | Inventories | |
|
| In Inventories, StoreToys4Boys writes:
| Been waiting for Inventory of these Toy Story 4 .
Can't part out since inventory still not done.
Sets available since end of april...
No part to sell,no money coming in for me or Bricklink.
|
Which set?
|
Author: | StoreToys4Boys | Posted: | Jun 15, 2019 17:27 | Subject: | Inventory Pending Approval (?) Toy Story: 4 | Viewed: | 49 times | Topic: | Inventories | Status: | Open | |
|
| Been waiting for Inventory of these Toy Story 4 .
Can't part out since inventory still not done.
Sets available since end of april...
No part to sell,no money coming in for me or Bricklink.
|
Author: | The_Brick_Freak | Posted: | Jun 14, 2019 05:08 | Subject: | Re: 70839 | Viewed: | 41 times | Topic: | Inventories | |
|
| In Inventories, Hygrotus writes:
| In Inventories, The_Brick_Freak writes:
| Thanks for the fast response axaday - I just need to hope Hygrotus sees this
message and can make it a priority haha
I would certainly give it a shot myself if i had more confidence in what to do
Regards
James
|
I will see what I can do
|
Woo Hoo - Thank You So Much
|
Author: | Hygrotus | Posted: | Jun 13, 2019 17:25 | Subject: | Re: 70839 | Viewed: | 43 times | Topic: | Inventories | |
|
| In Inventories, The_Brick_Freak writes:
| Thanks for the fast response axaday - I just need to hope Hygrotus sees this
message and can make it a priority haha
I would certainly give it a shot myself if i had more confidence in what to do
Regards
James
|
I will see what I can do
|
Author: | The_Brick_Freak | Posted: | Jun 13, 2019 00:48 | Subject: | Re: 70839 | Viewed: | 35 times | Topic: | Inventories | |
|
| Thanks for the fast response axaday - I just need to hope Hygrotus sees this
message and can make it a priority haha
I would certainly give it a shot myself if i had more confidence in what to do
Regards
James
|
Author: | axaday | Posted: | Jun 12, 2019 21:37 | Subject: | Re: 70839 | Viewed: | 30 times | Topic: | Inventories | |
|
| In Inventories, The_Brick_Freak writes:
| Any idea when 70839 The Rexcelsior will be inventoried? been keeping an eye on
this one for a while, not sure if anyone had plans to get it done.
Thanks
|
No one has reserved it. I don't think I'll be doing it. Most likely
guy to do a Lego Movie 2 is probably Hygrotus.
|
Author: | The_Brick_Freak | Posted: | Jun 12, 2019 21:34 | Subject: | 70839 | Viewed: | 85 times | Topic: | Inventories | Status: | Open | |
|
| Any idea when 70839 The Rexcelsior will be inventoried? been keeping an eye on
this one for a while, not sure if anyone had plans to get it done.
Thanks
|
|
Author: | randyf | Posted: | Jun 11, 2019 14:57 | Subject: | Re: Part 2739b in sets from 2012-2014 | Viewed: | 26 times | Topic: | Inventories | |
|
| Jonas -
I am more than happy to look into these on a case-by-case basis if you submit
the change requests. The change requests give me a record of things that need
looking into, so it is the easiest way for me to remember!
Cheers,
Randy
P.S. As Russell said, I always had a feeling something was up with these variants.
In Inventories, Turez writes:
| Hello everybody,
before I (maybe) do some proper requests, I'd like to clarify the following
issue regarding part 2739a/2739b in black.
Set 8110 came with 2739b in August 2011. That is correct: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5134871
In November 2011, 2739a was added as alternate. That is correct, too: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5256458
According to the catalog, five sets from 2012-2014 still had 2739b. I think that's
wrong because...
- I tried to find images or videos showing 2739b, but didn't find a single
one.
- All those sets were inventoried by the same person and always with Source:
Parts List.
- The following sets from 2012 and 2013 have 2739a as regular and these sets
were inventoried with Source: Sealed Set Contents.
Images of new sets with 2739a:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5549146
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5583833
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5706003
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5886402
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6026821
Summary: I think 2739b never appeared in any set from 2012 and later, so I suggest
to delete it from the inventories of 9398, 9396, 9393, 42005 and 42021.
Regards,
Jonas
|
|
|
Author: | Admin_Russell | Posted: | Jun 11, 2019 12:51 | Subject: | Re: Part 2739b in sets from 2012-2014 | Viewed: | 31 times | Topic: | Inventories | |
|
|
BrickLink ID CardAdmin_Russell
|
Location: USA, California |
Member Since |
Contact |
Type |
Status |
May 9, 2017 |
|
Admin |
|
|
BrickLink Administrator |
|
| Hi Jonas,
I myself have wondered about this part in our BrickLink inventories for several
years. Confusion seems to have come from images that did not show the differences
clearly enough.
In Inventories, Turez writes:
| Hello everybody,
before I (maybe) do some proper requests, I'd like to clarify the following
issue regarding part 2739a/2739b in black.
Set 8110 came with 2739b in August 2011. That is correct: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5134871
In November 2011, 2739a was added as alternate. That is correct, too: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5256458
According to the catalog, five sets from 2012-2014 still had 2739b. I think that's
wrong because...
- I tried to find images or videos showing 2739b, but didn't find a single
one.
- All those sets were inventoried by the same person and always with Source:
Parts List.
- The following sets from 2012 and 2013 have 2739a as regular and these sets
were inventoried with Source: Sealed Set Contents.
Images of new sets with 2739a:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5549146
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5583833
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5706003
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5886402
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6026821
Summary: I think 2739b never appeared in any set from 2012 and later, so I suggest
to delete it from the inventories of 9398, 9396, 9393, 42005 and 42021.
Regards,
Jonas
|
|
|
Author: | Turez | Posted: | Jun 11, 2019 08:41 | Subject: | Part 2739b in sets from 2012-2014 | Viewed: | 55 times | Topic: | Inventories | Status: | Open | |
|
| Hello everybody,
before I (maybe) do some proper requests, I'd like to clarify the following
issue regarding part 2739a/2739b in black.
Set 8110 came with 2739b in August 2011. That is correct: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5134871
In November 2011, 2739a was added as alternate. That is correct, too: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5256458
According to the catalog, five sets from 2012-2014 still had 2739b. I think that's
wrong because...
- I tried to find images or videos showing 2739b, but didn't find a single
one.
- All those sets were inventoried by the same person and always with Source:
Parts List.
- The following sets from 2012 and 2013 have 2739a as regular and these sets
were inventoried with Source: Sealed Set Contents.
Images of new sets with 2739a:
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5549146
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5583833
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5706003
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5886402
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=6026821
Summary: I think 2739b never appeared in any set from 2012 and later, so I suggest
to delete it from the inventories of 9398, 9396, 9393, 42005 and 42021.
Regards,
Jonas
|
|
Author: | randyipp | Posted: | Jun 9, 2019 16:58 | Subject: | Re: Lost Remarks and inventories after Bricksync | Viewed: | 40 times | Topic: | Inventories | |
|
| In Inventories, ThunderBricks writes:
| Hello,
I just restarted Bricksync, the synchronization took place but to my surprise,
it was reversed. All the changes made over the last two months via Bricklink
have disappeared and Bricksync has taken inventory of Brickowl as a reference.
I end up with a HUGE inventory problem. That never happened to me before ....
Usually when I run bricksync, it does sync commands and mate those of Bricklink
and Brickowl. He then uses Bricklink as a reference to update the changes on
Brickowl and not the other way around?
Is there a way back on Bricksync?
If you had a solution to this problem, I would be extremely grateful.
Lancelot (France)
|
Yes, use a backup.
Close bricksync, move a good backup to the data folder and name it bricksync.inventory.bsx
(you can add a .bak to the old one). Open bricksync and type sync.
Do not run bricksync when your bricklink store is closed. Bricksync doesn't
just malfunction, something was done wrong, just try to find out what happened
and learn from it for the future. It's a great program just takes some time
to get used to. Always know you have backups upon backups if an issue arises.
It takes a backup before making any changes.
The author is also amazing if you run into an issue as well.
|
|
Author: | WhiteHorseMatt | Posted: | Jun 9, 2019 16:11 | Subject: | Re: Lost Remarks and inventories after Bricksync | Viewed: | 38 times | Topic: | Inventories | |
|
| In Inventories, ThunderBricks writes:
| Hello,
I just restarted Bricksync, the synchronization took place but to my surprise,
it was reversed. All the changes made over the last two months via Bricklink
have disappeared and Bricksync has taken inventory of Brickowl as a reference.
I end up with a HUGE inventory problem. That never happened to me before ....
Usually when I run bricksync, it does sync commands and mate those of Bricklink
and Brickowl. He then uses Bricklink as a reference to update the changes on
Brickowl and not the other way around?
Is there a way back on Bricksync?
If you had a solution to this problem, I would be extremely grateful.
Lancelot (France)
|
Have a look at a couple of your recent Bricksync backups in the data folder,
you should be able to use one to roll back your inventory.
|
|
Author: | ThunderBricks | Posted: | Jun 9, 2019 15:10 | Subject: | Lost Remarks and inventories after Bricksync | Viewed: | 62 times | Topic: | Inventories | Status: | Open | |
|
| Hello,
I just restarted Bricksync, the synchronization took place but to my surprise,
it was reversed. All the changes made over the last two months via Bricklink
have disappeared and Bricksync has taken inventory of Brickowl as a reference.
I end up with a HUGE inventory problem. That never happened to me before ....
Usually when I run bricksync, it does sync commands and mate those of Bricklink
and Brickowl. He then uses Bricklink as a reference to update the changes on
Brickowl and not the other way around?
Is there a way back on Bricksync?
If you had a solution to this problem, I would be extremely grateful.
Lancelot (France)
|
|
Author: | randyf | Posted: | Jun 2, 2019 14:11 | Subject: | Re: Basic MUJI set | Viewed: | 35 times | Topic: | Inventories | |
|
| In Inventories, WhiteVanMan writes:
| Hi all.
I managed to pick up one of these sets today, and I remember seeing an article
on-line about how this would combine the playability of the LEGO parts with the
Japanese love of working with paper, so I snaffled it.
Now, looking through the contents, I note that the original submitter did NOT
include the paper sheets, nor is there a picture of the instruction sheet/booklet
Would it really be in the interests of the catalogue to include this via the
inventory?
|
Yes, very much so. The inventory would include the original paper sheets as they
came in the set. These would need to be added to the Paper category of the Parts
catalog. Any cut-out paper designs could also be added to the Paper category
of the Parts catalog, but these items would end up in the Counterparts section
of the set inventory.
| There are extra elements as well, which I will add shortly
|
Fantastic.
| I'm just concerned about the paper elements.
There are 8 different designs to be built, and the first design had been cut
out (badly), and, to my surprise, a purposely made hole puncher had been made
for use with this line, but wasn't included, so an ordinary one had been
used, which shows, as the holes are not in the right places....
Can the Cat admin(s) chime in over this?
Thanks in advance!
Paul
|
|
|
Author: | WhiteVanMan | Posted: | Jun 2, 2019 12:13 | Subject: | Basic MUJI set | Viewed: | 101 times | Topic: | Inventories | Status: | Open | |
|
| Hi all.
I managed to pick up one of these sets today, and I remember seeing an article
on-line about how this would combine the playability of the LEGO parts with the
Japanese love of working with paper, so I snaffled it.
Now, looking through the contents, I note that the original submitter did NOT
include the paper sheets, nor is there a picture of the instruction sheet/booklet
Would it really be in the interests of the catalogue to include this via the
inventory?
There are extra elements as well, which I will add shortly
I'm just concerned about the paper elements.
There are 8 different designs to be built, and the first design had been cut
out (badly), and, to my surprise, a purposely made hole puncher had been made
for use with this line, but wasn't included, so an ordinary one had been
used, which shows, as the holes are not in the right places....
Can the Cat admin(s) chime in over this?
Thanks in advance!
Paul
|
|
Author: | jameso321xyz | Posted: | May 28, 2019 01:19 | Subject: | Re: Identify set number from only three parts | Viewed: | 28 times | Topic: | Inventories | |
|
| Nice! well, at least we are all on the same page sorta
In Inventories, Admin_Russell writes:
| In Inventories, jameso321xyz writes:
| I had a hundred or so parts bags that became a bit tedious to identify where
they were from although not impossible, but I was thinking grind a database against
them.
tldr
used the rebrickable public csv files in MS Access to create a crude Query where
given three parts and their specific color can more often than not narrow down
set origin or narrow to 2 or 3
I am not a database expert, I am a novice, but I work with consumer level computer
consulting for small businesses for 20 year etc.
I dont know how to serve it up on the Internet, but I am looking.
I have not written the front end to it because I dont know how yet (should be
easy)
I just thought this might be useful to other people in some capacity
Thanks for reading
|
Just use this:
https://www.bricklink.com/catalogIn.asp?viewMulti=Y
|
|
|
|
Author: | jameso321xyz | Posted: | May 27, 2019 23:36 | Subject: | Identify set number from only three parts | Viewed: | 80 times | Topic: | Inventories | Status: | Open | |
|
| I had a hundred or so parts bags that became a bit tedious to identify where
they were from although not impossible, but I was thinking grind a database against
them.
tldr
used the rebrickable public csv files in MS Access to create a crude Query where
given three parts and their specific color can more often than not narrow down
set origin or narrow to 2 or 3
I am not a database expert, I am a novice, but I work with consumer level computer
consulting for small businesses for 20 year etc.
I dont know how to serve it up on the Internet, but I am looking.
I have not written the front end to it because I dont know how yet (should be
easy)
I just thought this might be useful to other people in some capacity
Thanks for reading
|
|
|
Author: | DeLuca | Posted: | May 27, 2019 14:54 | Subject: | Re: 41005 Heartlake High - Why a soccer ball? | Viewed: | 43 times | Topic: | Inventories | |
|
| In Inventories, superca writes:
| Inventory for 41005 Heartlake High contains only a plain soccer ball x45, but this set includes a basketball hoop. Did Lego intentionally change the ball type for this set, or is this possibly an inventory error and the part should be a plain basketball 43702.
|
LEGO has not produced a basketball element since 2006, so I assume that it is
easier/less expensive to simply recolour an existing piece than to make a new,
single-purpose, mould (or to revive the old one).
|
|
Author: | M_R | Posted: | May 27, 2019 14:09 | Subject: | Re: 41005 Heartlake High - Why a soccer ball? | Viewed: | 36 times | Topic: | Inventories | |
|
| In Inventories, superca writes:
| Inventory for 41005 Heartlake High contains only a plain soccer ball x45, but
this set includes a basketball hoop. Did Lego intentionally change the ball
type for this set, or is this possibly an inventory error and the part should
be a plain basketball 43702.
|
The part number in the inventory on Lego S&H is
Specifically number 6023209.
|
|
Author: | superca | Posted: | May 27, 2019 12:41 | Subject: | 41005 Heartlake High - Why a soccer ball? | Viewed: | 94 times | Topic: | Inventories | Status: | Open | |
|
| Inventory for 41005 Heartlake High contains only a plain soccer ball x45, but
this set includes a basketball hoop. Did Lego intentionally change the ball
type for this set, or is this possibly an inventory error and the part should
be a plain basketball 43702.
|
|
Author: | Brickwilbo | Posted: | May 21, 2019 07:25 | Subject: | Re: wanted list with the help of my store room | Viewed: | 23 times | Topic: | Inventories | |
|
| In Inventories, Broodyfour writes:
| I thought that when I make a wanted list of things I wish to buy that any items
already in my store's stockroom that appear on this new wanted list would
show up as a quantity I have already in-stock? I see this feature on my lists
but the spot is always left blank even when i know I have some in my stockroom......Is
there a setting I may have wrong or not turned on?
|
No, the Have is not about the inventory but after applying an order to a Wantlist.
To search your My inventory click on the extended search options and select Items
on my Wantlist click. Then you can manually adjust the quantities of the Wantlist.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|