Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | paulvdb | Posted: | Jun 18, 2019 15:00 | Subject: | Re: Inventory Change Request for Set 6338-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| The appearance of 4085b in this inventory seems very strange and may be a mistake. All other sets from that time have 4085c, so I think we should delete all 4085b until we have proof that they came in a sealed copy. Any thoughts?
|
It is strange that it's the only set with 4085b so many years after its last
appearance and even more years before it was brought back. But it was specifically
added in earlier change requests long ago.
Unfortunately the attached messages from back then are no longer available. So
we don't know the source for those requests. Could possibly be used sets
that didn't have original part variants. Or soneone not familiar with the
variants may have thought the clip was thin when it was really thick. Or maybe
a few stray parts from old stock were left somewhere and made their way into
this set.
|
|
Author: | paulvdb | Posted: | Jun 18, 2019 01:02 | Subject: | Re: Inventory Change Request for Set 7864-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Change 1 Part Light Gray {7864 Electric, Train 12V Transformer for 220V - Type 3 to 7864c01 Electric, Train 12V Transformer for 220V - Type 3 with Output Cover Plug}
Comments from Submitter:
see: https://www.bricklink.com/message.asp?ID=1145375
|
Thanks for adding the new part. But the image for part 7864 still shows the output
cover plug. It should probably be replaced with an image of a transformer without
the output cover plug.
|
|
Author: | paulvdb | Posted: | Jun 18, 2019 00:29 | Subject: | Re: Inventory Change Request for Set 9797-1 | Viewed: | 11 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 8 Part 4716 Light Bluish Gray Technic, Gear Worm Screw, Long (Alternate) (match ID 11)
* Add 8 Part 32269 Tan Technic, Gear 20 Tooth Double Bevel (Alternate) (match ID 12)
* Add 36 Part 6558 Blue Technic, Pin 3L with Friction Ridges Lengthwise (Alternate) (match ID 13)
* Add 1 Part 3713 Light Bluish Gray Technic Bush (Extra)
* Add 4 Part 3647 Dark Bluish Gray Technic, Gear 8 Tooth Type 1 (Alternate) (match ID 14)
* Add 1 Part 3647 Dark Bluish Gray Technic, Gear 8 Tooth Type 1 (Extra)
* Change 2 Part Black 4716 Technic, Gear Worm Screw, Long {match ID 0 to 11}
* Change 2 Part Light Bluish Gray 32269 Technic, Gear 20 Tooth Double Bevel {match ID 0 to 12}
* Change 36 Part Black 6558 Technic, Pin 3L with Friction Ridges Lengthwise {match ID 0 to 13}
* Change 4 Part Light Bluish Gray 3647 Technic, Gear 8 Tooth Type 1 {match ID 7 to 14}
Comments from Submitter:
I got blindsided again here. I've parted out this set several times and I didn't expect to learn anything more. So I hope these will go through, but I don't have a picture.
I'm not sure how to add an extra in an alternate color.
|
For parts 4716 and 32269 you are adding the alternate colors with quantity 8.
The items in the regular section have quantity 2. Is this correct or should the
alternates also have quantity 2?
|
|
Author: | paulvdb | Posted: | Jun 18, 2019 00:23 | Subject: | Re: Inventory Change Request for Set 4070-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mkschristy writes:
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
Got this set recently. I found out that the 1 x 1 trans red goes on the back of the camera and there is also one extra.
|
For additional evidence I found a Youtube video showing the opening of a sealed
set https://www.youtube.com/watch?v=8ugq_4j0WAw
|
|
Author: | paulvdb | Posted: | Jun 18, 2019 00:16 | Subject: | Re: Inventory Change Request for Set 4010-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Add 1 Part 3002old Blue Brick 2 x 3 without Cross Supports (match ID 1)
* Change {4 to 2} Part Trans-Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
* Change 1 Part Blue 3002 Brick 2 x 3 {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
Source: sealed set contents, found on Catawiki, Lot reference 27453349. Note that the batch code can be seen.
I am not sure if 3002 should stay as an alternate, so feel free to delete it.
|
I have deleted 3002. It can always be added again if we find evidence that it
was included in this set.
|
|
Author: | paulvdb | Posted: | Jun 17, 2019 07:16 | Subject: | Re: Inventory Change Request for Set 7864-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| Please make changes to the following inventory:
* Delete 1 Part bb529 Light Gray 12VAC Output Cover for Train 12V Transformer Type 3
Comments from Submitter:
This cover come with (plugged) and not separated.
[p=bb529] exist on catalog as a replacement part.
It should not appear on inventories.
Like battery cover.
As example:
* | | 40533 Electric, Train 9V RC Train Remote Control, Battery Compartment Cover with Non-Removable Screws Parts: Electric, Train |
|
The cover does come plugged into the transformer and is also shown as such on
the image of the transformer. Based on that I agree that it should not be listed
as a separate part in the inventory of this set.
|
|
Author: | paulvdb | Posted: | Jun 17, 2019 07:12 | Subject: | Re: Inventory Change Request for Set 7745-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| Please make changes to the following inventory:
* Add 2 Part 4170pb02 Red Electric, Train Light Prism 1 x 6 Holder with Swiss Federal Railways Logo Pattern (Sticker) (Counterpart)
Comments from Submitter:
As Sticker-sheet also contain Swiss Rails stickers.
(same as inventory 7740-1)
|
As far as I can see on the image of the stickersheet the stickers with white
print are all DB. For the other railways there are only stickers for the doors
with the logo in black and the number 7745 in white.
That means that this stickered part should not be added to the inventory for
set 7745.
|
|
Author: | paulvdb | Posted: | Jun 14, 2019 08:02 | Subject: | Re: Inventory Change Request for Set 1489-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 2 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Delete 4 Part 4073 Yellow Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Yellow Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 2346 Black Tire 30 x 10.5 Offset Tread
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
You requested to delete the wrong tires. I have deleted the correct tires (part
number 3641).
|
|
Author: | paulvdb | Posted: | Jun 14, 2019 06:24 | Subject: | Re: Inventory Change Request for Set 9376-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Minifig cas552 Royal Knights - King, Chrome Gold Crown, Lion Crest, Black Hips, Blue Legs (Counterpart)
* Change 2 Minifig cas060a Royal Knights - King, with Blue Legs without Cape and Plume {match ID 0 to 2}
Comments from Submitter:
This VERY nearly slipped by me. I was actually pack it for a customer and saw it. He graciously said he didn't mind if I assembled the minifig for the catalog.
|
There are two of cas060a in the inventory so I'm assuming there should also
be two of the alternate cas552. I changed the quantity.
|
|
Author: | paulvdb | Posted: | Jun 13, 2019 15:00 | Subject: | Re: Inventory Change Request for Set 6971-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 3942c White Cone 2 x 2 x 2 - Open Stud (Alternate) (match ID 5)
* Add 10 Part 4476b Blue Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts (match ID 6)
* Change 1 Part White 3942a Cone 2 x 2 x 2 - Solid Stud {match ID 0 to 5}
* Change 10 Part Blue 4476a Support 2 x 4 x 5 Stanchion Inclined, 3mm Wide Posts {match ID 0 to 6}
|
I checked the set in my personal collection that was built from a sealed set
and never mixed with parts from other sets. I can confirm that 3942c and 4476b
are both in my set. But I have the old version 4081a.
|
What catalog was there in the box? (Id?)
Is you box American, Canadian or European?
|
I bought this set a long time ago and no longer have the box and catalog. So
unfortunately I can't answer your questions.
|
|
Author: | paulvdb | Posted: | Jun 13, 2019 08:31 | Subject: | Re: Inventory Change Request for Set 6971-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 1 Part 3942c White Cone 2 x 2 x 2 - Open Stud (Alternate) (match ID 5)
* Add 10 Part 4476b Blue Support 2 x 4 x 5 Stanchion Inclined, 5mm Wide Posts (match ID 6)
* Change 1 Part White 3942a Cone 2 x 2 x 2 - Solid Stud {match ID 0 to 5}
* Change 10 Part Blue 4476a Support 2 x 4 x 5 Stanchion Inclined, 3mm Wide Posts {match ID 0 to 6}
|
I checked the set in my personal collection that was built from a sealed set
and never mixed with parts from other sets. I can confirm that 3942c and 4476b
are both in my set. But I have the old version 4081a.
|
|
Author: | paulvdb | Posted: | Jun 13, 2019 04:56 | Subject: | Re: How to add instruction weight? | Viewed: | 28 times | Topic: | Catalog | |
|
| In Catalog, brickconnector writes:
| I cannot add the weight of instruction book 8307-1. (177 grams). If I go to https://www.bricklink.com/catalogReq.asp
which category should I choose?
Set | Part | Minifig | Book | Gear | Catalog
Whichever I choose it doesn't work.
|
Category sets https://www.bricklink.com/catalogReq.asp?itemType=S in the top
field ("item no") enter the set number and enter the weight in grams in the field
"Change weight of instructions to."
|
|
Author: | paulvdb | Posted: | Jun 9, 2019 06:16 | Subject: | Re: Inventory Change Request for Set 9605-2 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, axaday writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Add 2 Part 73090b Red Brick, Modified 2 x 6 x 2 Weight - Bottom Sealed, Dimple on Ends (Alternate) (match ID 2)
* Change 2 Part Red 73090a Brick, Modified 2 x 6 x 2 Weight - Bottom Openings, Center Seam on Ends {match ID 0 to 2}
|
I was unaware of the variant. Actually totally unaware of weighted bricks before
I got this set. But I still have 2 of the 4 that I had and they have dimples.
I don't think there is any reason to keep the non-dimple in the inventory.
|
Thanks for checking your set. I have removed 73090a from the inventory and changed
73090b to regular.
|
|
Author: | paulvdb | Posted: | Jun 8, 2019 06:19 | Subject: | Re: Weird blue duplo parts. | Viewed: | 21 times | Topic: | Colors | |
|
| In Colors, crxefx writes:
| I've read about brittle blue being a period in time where the plastic turned
'weird' i suppose for whatever reason? However in my experience as a
seller, I fully believe it is a result of exposure to sunlight and such. Nothing
more. Blue, white, yellow and grey's turn all sorts of weird shades over
time. It's inevitable... I don't understand why we always talk about
brittle blue but not brittle yellow? If the part is not the right shade i'd
just throw it in the trash.
|
The term brittle blue is not just a discoloration. It is a bad quality plastic
that breaks easily. Other color bricks may discolor, but they don't just
break apart like the brittle blue pieces.
|
|
Author: | paulvdb | Posted: | Jun 4, 2019 23:05 | Subject: | Re: Inventory Change Request for Set 4555-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, FreeStorm writes:
| In Inventories Requests, FreeStorm writes:
| Please make changes to the following inventory:
* Change 8 Part Light Gray 3228b Train, Track Slotted Rail Straight {Regular to Alternate}
* Change 8 Part Light Gray 3228c Train, Track Plain Rail Straight (no slots, no notches on end) {Alternate to Regular}
Comments from Submitter:
I think the part 3228b was added as regular because it appear on the box.
Picture of sealed content will follow
|
I cannot link the pictures url
You can ask me by PM
|
Why should 3228b be alternate? By principle "first come first serves", the earlier
variant 3228b should be regular and 3228c be alternate. Am I missing something?
|
According to our guidelines the earlier variant is normally added as regular
and the later variant as alternate. So this request to switch the regular and
alternate part will be rejected.
|
Hi,
Did you find an evidence of existence of 3228b in this set?
The picture I found is from 1997, I did not found an earlier picture of this
set sealed.
|
I have seen several pictures of used sets with 3228b. No sealed sets unfortunately.
But it is likely that Lego would use leftover stock of 3228b in the first production
runs of this set before they started using the new variant 3228c.
|
|
Author: | paulvdb | Posted: | Jun 4, 2019 22:42 | Subject: | Re: Inventory Change Request for Set 6382-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, mhortar writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 6100pb01 Light Gray Baseplate, Road 32 x 32 with 3 Driveways, Joined Outer Lanes with 1,2 Pattern (6382-1981) (Alternate) (match ID 1)
* Change 1 Part Light Gray 6100px2 Baseplate, Road 32 x 32 with 3 Driveways, Open Outer Lanes with 1,2 Pattern (6382-1983) {match ID 1 to 0}
Comments from Submitter:
The baseplate 6100pb01 appeared only on the instructions. It does not exist. I contacted the two sellers selling them, and one of them checked and confirmed he has 6100pb02. The other didn't reply yet.
No 6100pb01 has been sold for the last 6 months.
I checked about 50 copies of the set 6382 in various markets but the baseplate were always 6100pb02.
|
I have a sealed copy of this set, but I don't know when it was produced.
What exactly is the difference between the 2 baseplate versions? I may be able
to check mine tonight when I get home.
Josh
|
Hi Josh,
Compare the white lines:
https://img.bricklink.com/ItemImage/PN/9/6100px2.png
http://www.peeron.com/scans/6382-1/3
ButI believe the one on the instructions does not exist. For the last 15 years,
nobody added any photo of it on BL, none is sold, none is find... it should be
just a prototype, but never produced for the market.
Bests
Reza
|
Lack of image certainly points to the fact that it was never included in the
final product. The only evidence I have found of its existance is in the instructions
and box art. So we can conclude that it must have been a prototype part and the
print was changed before the set went into production.
|
|
Author: | paulvdb | Posted: | Jun 4, 2019 02:51 | Subject: | Re: Inventory Change Request for Set 4555-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, FreeStorm writes:
| In Inventories Requests, FreeStorm writes:
| Please make changes to the following inventory:
* Change 8 Part Light Gray 3228b Train, Track Slotted Rail Straight {Regular to Alternate}
* Change 8 Part Light Gray 3228c Train, Track Plain Rail Straight (no slots, no notches on end) {Alternate to Regular}
Comments from Submitter:
I think the part 3228b was added as regular because it appear on the box.
Picture of sealed content will follow
|
I cannot link the pictures url
You can ask me by PM
|
Why should 3228b be alternate? By principle "first come first serves", the earlier
variant 3228b should be regular and 3228c be alternate. Am I missing something?
|
According to our guidelines the earlier variant is normally added as regular
and the later variant as alternate. So this request to switch the regular and
alternate part will be rejected.
|
|
Author: | paulvdb | Posted: | Jun 2, 2019 02:49 | Subject: | Re: Inventory Change Request for Set 118-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, wannes. writes:
| Please make changes to the following inventory:
* Delete 1 Part x870a Black Electric, Train 4.5V Whistle Thick (match ID 5)
* Delete 1 Part x870cc02 Black Electric, Train 4.5V Whistle Thin with Black Base (Alternate) (match ID 5)
* Add 1 Part x870cc02 Black Electric, Train 4.5V Whistle Thin with Black Base
Comments from Submitter:
This set has never contained a thick Whistle. The think whistle has only existed in prototype form, and was used to make the pictures for the box and catalogs.
The picture of the Bricklink listing is just a scan from a catalog, from the box or from the instructions.
The whistle has not been listed for sale on bricklink for at least the last 6 yeas. Non of my contacts who know this set very well have ever seen this whistle, so I think we can conclude that set 118 has never been released with a thick whistle.
|
I will accept this request to remove x870a due to lack of evidence for its appearance
in this set. It can always be added back as an alternate if someone finds evidence
that it did appear in this set.
|
|
Author: | paulvdb | Posted: | May 30, 2019 05:31 | Subject: | Re: Inventory Change Request for Set 8458-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| Please make changes to the following inventory:
* Add 1 Part 32190pb013 Metallic Silver Technic, Panel Fairing # 1 Large Short, Large Holes, Side A with Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32191pb013 Metallic Silver Technic, Panel Fairing # 2 Large Short, Large Holes, Side B with Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32188pb05 Metallic Silver Technic, Panel Fairing # 3 Large Long, Large Holes, Side A with Blue Faded in Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32188pb08 Metallic Silver Technic, Panel Fairing # 3 Large Long, Large Holes, Side A with Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32188pb07 Metallic Silver Technic, Panel Fairing # 3 Large Long, Large Holes, Side A with White 'Silver Champion' and Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32188pb06 Metallic Silver Technic, Panel Fairing # 3 Large Long, Large Holes, Side A with White 'Technic' Logo and Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32189pb05 Metallic Silver Technic, Panel Fairing # 4 Large Long, Large Holes, Side B with Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32189pb08 Metallic Silver Technic, Panel Fairing # 4 Large Long, Large Holes, Side B with Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32189pb07 Metallic Silver Technic, Panel Fairing # 4 Large Long, Large Holes, Side B with White 'Silver Champion' and Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 32189pb06 Metallic Silver Technic, Panel Fairing # 4 Large Long, Large Holes, Side B with White 'Technic' Logo and Fading Blue Checkered Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 2431pb560L Black Tile 1 x 4 with Double Yellow Headlight Left Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 2431pb560R Black Tile 1 x 4 with Double Yellow Headlight Right Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 2431pb563L Black Tile 1 x 4 with Fading Blue Checkered Pattern Left (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 2431pb563R Black Tile 1 x 4 with Fading Blue Checkered Pattern Right (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 2431pb559 Black Tile 1 x 4 with Fuel, Temperature, Speed and RPM Gauges Pattern (Sticker) - Set 8458 (Counterpart)
* Add 1 Part 2431pb558 Black Tile 1 x 4 with Yellow 'V10' Pattern (Sticker) - Set 8458 (Counterpart)
|
There should be two of 2431pb558. I changed the quantity.
|
|
Author: | paulvdb | Posted: | May 29, 2019 16:07 | Subject: | Inventory Change Request for Set 374-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part BA66pb01 Yellow Stickered Assembly 6 x 1 x 3 with Clock Pattern (Sticker) - Set 590-1 - 2 Bricks 1 x 6, 1 Brick 1 x 4 (Counterpart)
* Add 1 Part BA67pb01 Red Stickered Assembly 2 x 4 x 1 with Classic Fire Logo Pattern on Both Sides (Stickers) - Set 590 - 1 Plate 1 x 4, 2 Plates 1 x 1, 1 Plate 2 x 2, 1 Plate, Modified 1 x 4 with Towball Socket, Long (Counterpart)
|
|
Author: | paulvdb | Posted: | May 29, 2019 14:00 | Subject: | Re: Inventory Change Request for Set 7771-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, FreeStorm writes:
I see Paul already accepted these requests, but I am not sure about the black
44567b. The images are actually not in good enough positions to see the groove
or not, and it actually looks to me like it has the groove. I will need to see
more examples where the part is clear and in a position to see the groove or
not, and this change may be reversed or altered.
Cheers,
Randy
|
You might be right about that. On closer inspection it does look like it could
have a groove.
|
|
Author: | paulvdb | Posted: | May 29, 2019 10:07 | Subject: | Re: First time addition, how long | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, C0lsanders_ writes:
| I made 2 additions to the catalog the other day (2 tiles, from https://www.bricklink.com/message.asp?ID=1141099).
How long is typical for them to be approved and added? And, can I perhaps expect
a message or some other notification that "your item has been added", or similar?
Thanks,
Miles (C0lsanders_)
|
They were already approved on Monday if you're talking about these two.
[p=3068bpb1232]
[p=3068bpb1233]
|
|
Author: | paulvdb | Posted: | May 29, 2019 07:38 | Subject: | Re: Inventory Change Request for Set 60181-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| Please make changes to the following inventory:
* Add 1 Part 30387pb016 Red Hinge Brick 1 x 4 Locking with Red and White Danger Stripes Pattern on Both Sides (Stickers) - Set 60181 (Counterpart)
* Add 1 Part 32523pb13 Red Technic, Liftarm 1 x 3 Thick with 'MAX 2T' Pattern (Sticker) - Set 60181 (Counterpart)
* Add 1 Part 93606pb081 Lime Slope, Curved 4 x 2 No Studs with 'GRIP 60181' (Sticker) - Set 60181 (Counterpart)
|
There are two of 30387pb016 in this set. I changed the quantity after I approved
this request.
|
|
Author: | paulvdb | Posted: | May 29, 2019 00:24 | Subject: | Re: Inventory Change Request for Set 70612-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| Please make changes to the following inventory:
* Add 1 Part 43710pb15 Sand Green Wedge 4 x 2 Triple Left with Five Black Triangles on a Sand Green Background Pattern (Sticker) - Set 70612 (Counterpart)
* Add 1 Part 43710pb16 Sand Green Wedge 4 x 2 Triple Left with Gold Arrow on a Sand Green Background Pattern (Sticker) - Set 70612 (Counterpart)
* Add 1 Part 43711pb15 Sand Green Wedge 4 x 2 Triple Right with Five Black Triangles on a Sand Green Background Pattern (Sticker) - Set 70612 (Counterpart)
* Add 1 Part 43711pb16 Sand Green Wedge 4 x 2 Triple Right with Gold Arrow on Sand Green Background Pattern (Sticker) - Set 70612 (Counterpart)
|
There should be two each for 43710pb016 and 43711pb016. I changed quantity for
both.
|
|
Author: | paulvdb | Posted: | May 27, 2019 11:26 | Subject: | Re: 62436c01pb01 - year released | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, aladar123 writes:
| Hi,
I just have a 62436c01pb01 in my hands also its pair and both have 2006 as the
year on them. Do I have a different part or the catalog needs an update?
Thanks,
Tamas
|
The year on the part is the copyright year. The year in the Bricklink catalog
is when it was first included in a set. This is often a year later because of
the time it takes to design and then produce parts.
|
|
Author: | paulvdb | Posted: | May 26, 2019 04:03 | Subject: | Inventory Change Request for Set 10257-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig twn292a Carousel Ticket Vendor with Back Print (Alternate) (match ID 1)
* Change 1 Minifig twn292 Carousel Ticket Vendor {match ID 0 to 1}
|
|
Author: | paulvdb | Posted: | May 26, 2019 03:17 | Subject: | Inventory Change Request for Set 71043-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1228 Dark Red Tile 2 x 2 with Groove with Gryffindor Crest Pattern (Sticker) - Set 71043 (Counterpart)
* Add 1 Part 3068bpb1229 Yellow Tile 2 x 2 with Groove with Hufflepuff Crest Pattern (Sticker) - Set 71043 (Counterpart)
* Add 1 Part 3068bpb1230 Dark Blue Tile 2 x 2 with Groove with Ravenclaw Crest Pattern (Sticker) - Set 71043 (Counterpart)
* Add 1 Part 3068bpb1231 Dark Green Tile 2 x 2 with Groove with Slytherin Crest Pattern (Sticker) - Set 71043 (Counterpart)
|
|
Author: | paulvdb | Posted: | May 25, 2019 07:13 | Subject: | Inventory Change Request for Set 75894-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Dark Green {50305 Wedge, Plate 8 x 3 Left to 43723 Wedge, Plate 3 x 2 Left}
Comments from Submitter:
See https://www.bricklink.com/message.asp?ID=1142196
This was a mistake in the Lego replacement parts site. The correct part is shown in the parts list in the instructions.
|
|
Author: | paulvdb | Posted: | May 25, 2019 04:17 | Subject: | Re: Inventory Change Request for Set 8570-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, samsam2 writes:
| Please make changes to the following inventory:
* Add 1 Part 4265c Light Gray Technic Bush 1/2 Smooth (Extra)
* Change {4 to 3} Part Black 4519 Technic, Axle 3
Comments from Submitter:
I have just opened a sealed set today and it's in front of me. I was intending to sell it sealed until I got water inside through the holes in the lid..... oops.
You can verify in the instructions, the intermediate and final build, no need for a fourth 3L axle. It's not even here to keep as an extra. There are only three.
|
The official piece count on the packaging is 44. This change brings the piece
count down to 43 on BrickLink, so we are now somehow missing a part. I went and
checked the data from the online LEGO database, and they have three Light Gray
4265c listed as coming in the set, but the BrickLink inventory only shows two.
How many are in your set?
Cheers,
Randy
|
In this request one was added as extra, so that would mean that there were three
in the set.
|
I was checking to see if there were three or really four. I found evidence that
the set came with four, which would mean three as regular and one as extra. The
online LEGO database backs this up, but I wanted to see if an error was made
here or not. In any case, something fishy is going on and an inventory note may
need to made.
Cheers,
Randy
|
I went through the instructions and it appears that only two 4265c are needed
to build this. Unless I overlooked one. So it could be a mistake in the Lego
database.
|
|
Author: | paulvdb | Posted: | May 25, 2019 03:05 | Subject: | Re: Inventory Change Request for Set 8570-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, samsam2 writes:
| Please make changes to the following inventory:
* Add 1 Part 4265c Light Gray Technic Bush 1/2 Smooth (Extra)
* Change {4 to 3} Part Black 4519 Technic, Axle 3
Comments from Submitter:
I have just opened a sealed set today and it's in front of me. I was intending to sell it sealed until I got water inside through the holes in the lid..... oops.
You can verify in the instructions, the intermediate and final build, no need for a fourth 3L axle. It's not even here to keep as an extra. There are only three.
|
The official piece count on the packaging is 44. This change brings the piece
count down to 43 on BrickLink, so we are now somehow missing a part. I went and
checked the data from the online LEGO database, and they have three Light Gray
4265c listed as coming in the set, but the BrickLink inventory only shows two.
How many are in your set?
Cheers,
Randy
|
In this request one was added as extra, so that would mean that there were three
in the set.
|
|
Author: | paulvdb | Posted: | May 25, 2019 00:04 | Subject: | Re: Inventory Change Request for Set 6543-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Yoshizard64 writes:
| Please make changes to the following inventory:
* Change 4 Part Green {2518 Plant, Tree Palm Leaf Large 10 x 5 to 6148 Plant, Tree Palm Leaf Small 8 x 3}
Comments from Submitter:
Part is listed as 2518 Plant, Tree Palm Leaf Large 10 x 5. Correct part is actually 6148 Plant, Tree Palm Leaf Small 8 x 3. Look at box artwork and first page of instructions, it is using the smaller size leaf.
|
I checked the set in my personal collection and can confirm that part 6148 is
in this set.
|
|
Author: | paulvdb | Posted: | May 24, 2019 00:44 | Subject: | Inventory Change Request for Set 7747-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Source: sealed set contents.
|
|
|
Author: | paulvdb | Posted: | May 17, 2019 13:05 | Subject: | Re: Inventory Change Request for Set 1-12 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, grotigni writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, grotigni writes:
| Please make changes to the following inventory:
* Change {1 to 2} Part Black 3853mi Minitalia Window 1 x 4 x 3 with 12 Panes
* Change {2 to 4} Part Green 3856mi Minitalia Window 1 x 2 x 3 Shutter (17 slats, 29 x 17 mm)
* Change {10 to 4} Part White 3004 Brick 1 x 2
* Change {6 to 7} Part White 3003old Brick 2 x 2 without Inside Supports
* Change {18 to 19} Part White 3001old Brick 2 x 4 without Cross Supports
* Change {7 to 3} Part Yellow 3003old Brick 2 x 2 without Inside Supports
* Change {15 to 9} Part Yellow 3001old Brick 2 x 4 without Cross Supports
Comments from Submitter:
I own three of this sets. I am absolutely sure about bricks quantities. Thanks. Giovanni
|
Hi there, Giovanni!
Were all three of these sets originally purchased new by you and not mixed with
the contents of other sets?
|
Hi Randy,
yes, sets I purchased were all sealed and bricks inside were new. I am very interested
in Minitalia and I checked sets accurately to exclude variations in bricks inside.
Actually, I discovered the existence of two slightly different boxes, I will
post photos in catalog next days.
Thanks, Giovanni.
|
Hi Giovanni,
The original inventory was based on the box art. Box art is not always clear
about the exact parts that are in the set. In this case there must be a window
in the back of the house that was not visible on the box art. That explains an
additional window and less bricks. Thank you for checking and updating this inventory
based on sealed set contents.
|
|
Author: | paulvdb | Posted: | May 12, 2019 15:13 | Subject: | Re: Inventory Change Request for Set 75202-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mvdheide writes:
| Please make changes to the following inventory:
* Add 1 Part 44676pb041 Dark Bluish Gray Flag 2 x 2 Trapezoid with SW Dark Red and Dark Gray Markings Pattern on Both Sides (Stickers) - Set 75202 (Counterpart)
* Add 1 Part 2335pb188 Light Bluish Gray Flag 2 x 2 Square with SW Dark Red and Dark Gray Markings Pattern on Both Sides (Stickers) - Set 75202 (Counterpart)
* Add 1 Part 3297pb045 White Slope 33 3 x 4 with Dark Bluish Gray Hexagonal Pattern 2 (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 3297pb045 White Slope 33 3 x 4 with Dark Bluish Gray Hexagonal Pattern 2 (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 15068pb171 Light Bluish Gray Slope, Curved 2 x 2 No Studs with SW Perforated Plate Pattern (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 15068pb169 Light Bluish Gray Slope, Curved 2 x 2 No Studs with SW Vent and Black Line Pattern (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 15068pb170 Light Bluish Gray Slope, Curved 2 x 2 No Studs with SW Vent Pattern (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 93606pb086 Light Bluish Gray Slope, Curved 4 x 2 No Studs with SW Hoses and Vent Pattern 2 (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 93606pb085 Light Bluish Gray Slope, Curved 4 x 2 No Studs with SW Hoses and Vent Pattern 1 (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 93606pb087 Light Bluish Gray Slope, Curved 4 x 2 No Studs with SW Pipes Pattern (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 64225pb028 Light Bluish Gray Wedge 4 x 3 No Studs with SW Panels, Pipes and Grill Pattern (Sticker) - Set 75202 (Counterpart)
* Add 1 Part 93606pb084 Light Bluish Gray Slope, Curved 4 x 2 No Studs with SW Vent and Peeling Dark Red Paint Pattern (Sticker) - Set 75202 (Counterpart)
|
You added 3297pb045 twice. I'm assuming one of those should be 3297pb044.
I added that one for you.
|
|
Author: | paulvdb | Posted: | May 12, 2019 01:20 | Subject: | Re: Inventory Change Request for Set 41188-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jerzeeg writes:
| Please make changes to the following inventory:
* | | 41188-1 (Inv) Breakout from the Goblin King's Fortress 681 Parts, 4 Minifigures, 2017 Sets: Elves |
* Delete 1 Part 27965 Pearl Gold Hose, Flexible 22L with 2 Connector Ends (Zipline) (Extra)
|
From the Additional Information About Extra Items section of the Inventory
Sections: Regular, Extra, Counterpart, and Alternate help page:
https://www.bricklink.com/help.asp?helpID=1562#extraItems
Removing or Changing Extra Items - Extra parts can vary depending on when
and where a set was manufactured, meaning that some new sets may include them
and others may not. The quantity of these extra parts can also vary. Extra parts
are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error.
This extra part was found in some sealed copies of this set so it will not be
removed.
|
|
Author: | paulvdb | Posted: | May 12, 2019 01:15 | Subject: | Re: Inventory Change Request for Set 7259-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Maximilien writes:
| Please make changes to the following inventory:
* Add 2 Part 2730 White Technic, Brick 1 x 10 with Holes
* Delete 4 Part 40490 White Technic, Liftarm 1 x 9 Thick (match ID 99)
Comments from Submitter:
Part 2730 should be 4 (2 on step 9, page 5, and 2 on step 14, page 8). Parte 40490 should be only 2 (1 on step 4, page 23, and 1 on step 4, page 34 - I can't find any other use of this part)
|
This set was redesigned as mentioned in the inventory note below the inventory:
"There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.
Quick overview of redesign: In the central gear system two white 1 x 9 liftarms
are replaced by two white 1 x 10 Technic bricks."
|
|
|
Author: | paulvdb | Posted: | May 10, 2019 03:46 | Subject: | Re: Inventory Change Request for Gear 851627 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, bje writes:
| Please make changes to the following inventory:
* Add 1 Part 3070bpb131 Black Tile 1 x 1 with Letter Capital Q Pattern - Smaller Font and Rectangular Line (Alternate) (match ID 1)
* Change 1 Part Black 3070bpb025 Tile 1 x 1 with Letter Capital Q Pattern - Larger Font and Parallelogram Line {match ID 0 to 1}
Comments from Submitter:
From sealed set parted out. Also see https://www.bricklink.com/message.asp?ID=1138646
|
Should 3070bpb025 stay in this inventory? Is there any evidence that it ever
came in this set?
|
|
Author: | paulvdb | Posted: | May 7, 2019 10:28 | Subject: | Re: Inventory Change Request for Set 75954-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Turez writes:
| Please make changes to the following inventory:
* Add 1 Part 2453bpb02L Bright Light Orange Brick 1 x 1 x 5 - Solid Stud with HP Mirror of Erised Ornament Pattern Model Left Side (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 2453bpb02R Bright Light Orange Brick 1 x 1 x 5 - Solid Stud with HP Mirror of Erised Ornament Pattern Model Right Side (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 3040pb022L Bright Light Orange Slope 45 2 x 1 with HP Mirror of Erised Ornament Pattern Model Left Side (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 3040pb022R Bright Light Orange Slope 45 2 x 1 with HP Mirror of Erised Ornament Pattern Model Right Side (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 15571pb02 Pearl Gold Slope 45 2 x 1 Triple with Bottom Stud Holder with 'Erised' and HP Mirror of Erised Ornament Pattern (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 57895pb056 Black Glass for Window 1 x 4 x 6 with Mirrored Quirinus Quirrell / Ron Weasley Pattern (Stickers) - Set 75954 (Counterpart)
* Add 1 Part 57895pb057 Black Glass for Window 1 x 4 x 6 with Mirrored Albus Dumbledore / Harry Potter with Parents Pattern (Stickers) - Set 75954 (Counterpart)
* Add 1 Part 14769pb271 White Tile, Round 2 x 2 with Bottom Stud Holder with HP Hogwarts Great Hall Clock Face Pattern (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 87421pb051 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Brown Bricks with Moss Pattern (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 30292pb039 Black Flag 7 x 3 with Rod with HP Slytherin Banner / Ravenclaw Banner Pattern (Stickers) - Set 75954 (Counterpart)
* Add 1 Part 30292pb039 Black Flag 7 x 3 with Rod with HP Slytherin Banner / Ravenclaw Banner Pattern (Stickers) - Set 75954 (Counterpart)
* Add 1 Part 30562pb053 Tan Cylinder Quarter 4 x 4 x 6 with Brown Brick Wall Pattern on Upper Left Type 1 (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 30562pb054 Tan Cylinder Quarter 4 x 4 x 6 with Brown Brick Wall Pattern on Upper Left Type 2 (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 30562pb055 Tan Cylinder Quarter 4 x 4 x 6 with Brown Brick Wall Pattern on Upper Right (Sticker) - Set 75954 (Counterpart)
* Add 1 Part 30153 Trans-Bright Green Rock 1 x 1 Jewel 24 Facet (Extra)
* Add 1 Part 30153 Trans-Clear Rock 1 x 1 Jewel 24 Facet (Extra)
* Add 1 Part 30153 Trans-Dark Blue Rock 1 x 1 Jewel 24 Facet (Extra)
* Add 1 Part 30153 Trans-Green Rock 1 x 1 Jewel 24 Facet (Extra)
* Add 1 Part 30153 Trans-Purple Rock 1 x 1 Jewel 24 Facet (Extra)
* Add 1 Part 30153 Trans-Red Rock 1 x 1 Jewel 24 Facet (Extra)
* Add 1 Part 30153 Trans-Yellow Rock 1 x 1 Jewel 24 Facet (Extra)
Comments from Submitter:
Extra parts from sealed set.
|
You added 30292pb039 twice. I'm assuming one of those should be 30292pb038.
I added that one for you.
|
|
Author: | paulvdb | Posted: | May 7, 2019 03:54 | Subject: | Re: Inventory Change Request for Set 724-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 801 Yellow Door 1 x 3 x 3 Left with Window and Vertical Handle
* Delete 1 Part 802 Yellow Door 1 x 3 x 3 Right with Window and Vertical Handle
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2ac01 Red Train Wheel Spoked (for motor), with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2A / trainrim) (Counterpart)
* Add 1 Part 802a Yellow Door 1 x 3 x 3 Right with Window and Horizontal Handle
* Add 1 Part 801a Yellow Door 1 x 3 x 3 Left with Window and Horizontal Handle
* Add 4 Part wheel2ac01 Red Train Wheel Spoked (for motor), with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2A / trainrim)
|
The trainrims came always assembled before 1980.
The first photo is a sealed one. In all the other photos I found, the doors 802a
and 801a appear with stickers applied on them. So I guess this was the only variant
used for this set. (not 100% sure though)
|
I have accepted your request for the wheels with rims. I would like to take a
bit more time to decide about the doors.
I know that old set inventories are not always reliable when it comes to part
variants, but I would like to give other people a chance to weigh in on this
before I delete a part variant from a set inventory.
|
I considered the doors 803 and 804 "undetermined" so why I requested to remove
them. Since my request, I found two used sets coming with the other version (that
looks like the photo of 803 and 804: with vertical handles) In each used copy,
we can see one door with sticker "724" applied. The stickers of both copies look
old and in bad condition, make me believe they were applied many years ago
I attach photos of one copy, which is incomplete (missing few parts or replaced
by other part) The other copy is removed from Markplaats.
|
Based on this I'll leave the 801 and 802 doors in the inventory and I'll
make the 801a and 802a doors alternates.
|
|
Author: | paulvdb | Posted: | May 6, 2019 10:21 | Subject: | Re: Inventory Change Request for Set 7810-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* | | 7810-1 (Inv) Push-Along Steam Engine (Locomotive without motor) 91 Parts, 1 Minifigure, 1980 Sets: Train: 4.5V |
* Delete 2 Part 3002 Red Brick 2 x 3 (Alternate) (match ID 2)
* Delete 2 Part 3002old Red Brick 2 x 3 without Cross Supports (match ID 2)
* Add 2 Part 3002old Red Brick 2 x 3 without Cross Supports
Comments from Submitter:
The brick with cross supports was released first sometime near 1987-8 but this set was released between 1980-2. So I think it should be removed.
Concerning functionality of Change request: get this error in order to change 3002old:
Oops! There was a problem processing your request:
Entry #2: Item No Required if Item Type is Entered.
If I enter 3002old for Item No, I get
"Oops! There was a problem processing your request:
Entry #2: New Item Type & Item No is same as Existing Item Type & Item No."
|
I think it is likely that the 3002 with cross supports was never in this set.
But I'll give it a few days to see if anyone has a convincing argument to
keep it in this inventory.
|
|
Author: | paulvdb | Posted: | May 5, 2019 02:52 | Subject: | Re: Inventory Change Request for Set 8851-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, jack_xp writes:
| Please make changes to the following inventory:
* Change 1 Part Black {3705b Technic, Axle 4 Threaded to 3705 Technic, Axle 4} (Extra)
Comments from Submitter:
Are you suore that extra item is 3705b (threaded) and not a 3705 (normal)? In the instruction of the kit neve use the 3705b item
|
Nope, not sure at all!
This part was added as an extra in 2010. Unfortunately, the Inventory Change
Requests from back then were not saved indefinitely in the forums like they are
today, so we have no information as to why this change was asked for or approved.
I honestly can't see a reason for it being in there.
Our guidelines for Extras in an inventory state:
Removing or Changing Extra Items - Extra parts can vary depending on when
and where a set was manufactured, meaning that some new sets may include them
and others may not. The quantity of these extra parts can also vary. Extra parts
are typically not removed or reduced in quantity unless it can be determined
that they were originally added or increased in error.
So, to make a decision concerning whether to remove this as an extra part, I
have to somehow determine if it was originally added in error. That is going
to be tough to do after nine years removed from the actual change being made.
Any ideas on how you would proceed with this, Paul?
Cheers,
Randy
|
Part 3705b first appeared as a regular part in sets in 1986 according to our
catalog. So it seems strange that it appeared as an extra part in another set
two years before that. Based on that it seems that a mistake was probably made
when adding this extra.
The only way to be sure would be to ask the person who added it in the first
place. But even they might not remember it after so many years.
|
|
Author: | paulvdb | Posted: | May 4, 2019 10:00 | Subject: | Re: Inventory Change Request for Set 721-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| Maybe [p=bb299] should also be moved from extra to regular.
This screwdriver is used to build the motor.
|
I guess it should be regular if it is needed to build the set. Randy, what do
you think?
|
|
Author: | paulvdb | Posted: | May 4, 2019 09:58 | Subject: | Re: Inventory Change Request for Set 721-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| The production date of motor in one of the photos attached is 15 7 69 (Mid July
1969) coming with black train rims. This set was released in 1969. All the other
photos of sealed copies come also with black rims. Maybe we can remove the light
gray one?
|
As with your other request I don't feel comfortable removing these parts
just yet. I'd like some more input on that from people who own the set and/or
are knowledgeable about these old trains.
|
|
Author: | paulvdb | Posted: | May 4, 2019 02:02 | Subject: | Re: Inventory Change Request for Set 724-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 801 Yellow Door 1 x 3 x 3 Left with Window and Vertical Handle
* Delete 1 Part 802 Yellow Door 1 x 3 x 3 Right with Window and Vertical Handle
* Delete 4 Part wheel2a Red Train Wheel Spoked for Motor
* Delete 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel2ac01 Red Train Wheel Spoked (for motor), with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2A / trainrim) (Counterpart)
* Add 1 Part 802a Yellow Door 1 x 3 x 3 Right with Window and Horizontal Handle
* Add 1 Part 801a Yellow Door 1 x 3 x 3 Left with Window and Horizontal Handle
* Add 4 Part wheel2ac01 Red Train Wheel Spoked (for motor), with Black Train Rim for 4.5V & 12V Locomotive Wheels (wheel2A / trainrim)
|
The trainrims came always assembled before 1980.
The first photo is a sealed one. In all the other photos I found, the doors 802a
and 801a appear with stickers applied on them. So I guess this was the only variant
used for this set. (not 100% sure though)
|
I have accepted your request for the wheels with rims. I would like to take a
bit more time to decide about the doors.
I know that old set inventories are not always reliable when it comes to part
variants, but I would like to give other people a chance to weigh in on this
before I delete a part variant from a set inventory.
|
|
Author: | paulvdb | Posted: | May 4, 2019 01:33 | Subject: | Re: Inventory Change Request for Set 310-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, palenjo writes:
| Please make changes to the following inventory:
* Add 2 Part 3009pb039 Blue Brick 1 x 6 with White 'TRANSPORT' Stencil Pattern (Alternate)
|
Could you please let me know what your source is for making this request?
Thanks,
Paul
|
|
Author: | paulvdb | Posted: | May 2, 2019 15:16 | Subject: | Inventory Change Request for Set 4842-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 13 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
After approving gvbricks request these are the only undetermined jumpers left in the set. I found a review on Eurobricks that clearly shows reddish brown jumpers without groove. https://www.eurobricks.com/forum/index.php?/forums/topic/57719-review-4842-hogwarts-castle/
|
|
Author: | paulvdb | Posted: | May 1, 2019 09:59 | Subject: | Re: Inventory Change Request for Set 231-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
Also 'A' sticker on a 1x6x5 brick http://peeron.com/scans/231-1/13/
Very confusing instructions when it comes to placing the stickers. But the 1x3x5
brick with 'A' sticker is the first appearance of this sticker in the
instructions so I'll go with that as the correct placement.
|
|
Author: | paulvdb | Posted: | Apr 30, 2019 15:34 | Subject: | Re: Inventory Change Request for Set 70595-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, BrickoBob writes:
| Please make changes to the following inventory:
* Add 1 Part 2431pb574 White Tile 1 x 4 with Red Double Arrow and Red and White Danger Stripes Pattern (Sticker) - Set 70595 (Counterpart)
|
Instructions show two of this stickered part. I changed the quantity after I
approved your request.
|
|
Author: | paulvdb | Posted: | Apr 30, 2019 03:05 | Subject: | Re: Inventory Change Request for Set 316-2 | Viewed: | 13 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, trchapman67 writes:
| Please make changes to the following inventory:
* Add 4 Part 7049b White Brick, Modified 2 x 4 with Wheels Holder Old and Trans-Clear Bottom (Alternate) (match ID 105853)
Comments from Submitter:
Late 1960s Samsonite Model Maker sets came with 7049b axle bricks.
|
Could you please let me know what your source is for making this request? And
also the other request for this set?
Thanks,
Paul
|
|
Author: | paulvdb | Posted: | Apr 30, 2019 03:04 | Subject: | Re: Inventory Change Request for Set 41323-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, ElvisandBane writes:
| Please make changes to the following inventory:
* Add 1 Part 13459pb007 Dark Blue Road Sign Round on Pole with Mountains and Cabin Pattern on Both Sides (Stickers) - Set 41323 (Counterpart)
* Add 1 Part 87079pb576 Medium Azure Tile 2 x 4 with Medium Azure Bedspread with Snowflakes Pattern (Sticker) - Set 41323 (Counterpart)
* Add 1 Part 87079pb575 Magenta Tile 2 x 4 with Magenta Bedspread with Snowflakes and Corner Pulled Back Pattern (Sticker) - Set 41323 (Counterpart)
* Add 1 Part 14769pb268 Lime Tile, Round 2 x 2 with Bottom Stud Holder with Cushion with Triangles and Stitching Pattern (Sticker) - Set 41323 (Counterpart)
* Add 1 Part 3245cpb100 White Brick 1 x 2 x 2 with Inside Stud Holder with Dog and Stars in Dog Bowl Pattern (Sticker) - Set 41323 (Counterpart)
* Add 1 Part 3069bpb712 White Tile 1 x 2 with Mountains and Snowflake Pattern (Sticker) - Set 41324 (Counterpart)
* Add 1 Part 3069bpb711 White Tile 1 x 2 with Mountain and Deer Pattern (Sticker) - Set 41323 (Counterpart)
* Add 1 Part 26603pb040 White Tile 2 x 3 with 'SNOW' and Mountains Pattern (Sticker) - Set 41323 (Counterpart)
|
There are two of 14769pb268 in this set. I changed the quantity after I approved
your request.
|
|
|
|
Author: | paulvdb | Posted: | Apr 27, 2019 04:27 | Subject: | Re: Inventory Change Request for Part 765c01 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, FreeStorm writes:
| I also wanted to add elecpin-screw , but it seems that ADD option for inventory
change is broken. (always return error 500)
Same error for [Add inventory] for parts.
|
This was caused by the dash (-) in the part number. Marek has changed it to remove
the dash so it should be possible to add it now.
|
|
Author: | paulvdb | Posted: | Apr 26, 2019 23:35 | Subject: | Re: Inventory Change Request for Set 44018-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mvdheide writes:
| Please make changes to the following inventory:
* Add 1 Part 15361pb005 Trans-Neon Orange Cylinder Half 3 x 5 x 8 with Pin Holes with 'LOCK', '207 C' and Pipes Pattern (Sticker) - Set 44018 (Counterpart)
|
Based on instructions there should be two of these in this set. I changed the
quantity after I approved this request.
|
|
Author: | paulvdb | Posted: | Apr 25, 2019 23:24 | Subject: | Re: Inventory Change Request for Set 7259-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, lastnameonhere writes:
| Please make changes to the following inventory:
* Add 4 Part 2730 White Technic, Brick 1 x 10 with Holes
Comments from Submitter:
checklist for set shows x2 of this piece 2730 white technic brick 1x10 with holes and 4 are needed for the build
|
These are already listed in the alternate section of the inventory. See also
the inventory note at the bottom of the inventory:
"There are at least 2 different versions of instructions for this set. The differences
for the second version are indicated in this inventory in the Alternate Items
section with Match ID 99.
Quick overview of redesign: In the central gear system two white 1 x 9 liftarms
are replaced by two white 1 x 10 Technic bricks."
|
|
Author: | paulvdb | Posted: | Apr 25, 2019 00:09 | Subject: | Re: Help identify 2 pieces | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, Quaysretire writes:
| I have 2 pieces : 44570 dark grey and light grey and on the back they say 2002
however the catalog only starts from 2003 . Help please . Very new to all of
this thanks .
|
The piece was probably first produced in 2002. It takes some time from the first
design of a new piece until it actually shows up in a set. So it's not unusual
for a piece to have a copyright year on it that is a year before it first appears
in a set.
|
|
Author: | paulvdb | Posted: | Apr 20, 2019 03:52 | Subject: | Re: Inventory Change Request for Set 1560-2 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brick_Base writes:
| Please make changes to the following inventory:
* Add 1 Part 3001oldpb03 White Brick 2 x 4 with Plane Windows 8 in Thin Blue Stripe Pattern (Counterpart)
Comments from Submitter:
I have a brick 2x4 "White Brick 2 x 4 with Plane Windows 8 in Thin Blue Stripe Pattern" with a "Lufthansa" Sticker on both sides. I was looking for the set in which this part occurs. As it looks in the picture from this set, it can only be from this set. Unfortunately the entry for this part is missing so far. Could you please add it so that I can include it in my inventory? Of course, I can also provide a picture of the part. Thank you very much!
|
You can submit the stickered part to the catalog yourself. Here is the procedure
to add a stickered part to the catalog and get it added as a counterpart to the
set inventory:
(1) Add the stickered part to the BrickLink catalog:
https://www.bricklink.com/wantedCatalog.asp?catType=P
Help on adding an item to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=71
(2) Add an image to the BrickLink catalog for the stickered part:
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=P
Help on adding an image to the BrickLink catalog:
https://www.bricklink.com/help.asp?helpID=87
(3) Fill out an Inventory Change Request to add the stickered part to the inventory
after it is approved by the Catalog Administrators.
Cheers,
Paul
P.S. The following thread may also be of help:
https://www.bricklink.com/message.asp?ID=1085264
|
|
Author: | paulvdb | Posted: | Apr 16, 2019 06:55 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
Before approving this I would like confirmation that the print really is dark
brown. In the other discussion topic I only saw people saying that the print
on their parts is not reddish brown. But printed colors can sometimes look a
bit different because of the background color on which it is printed. So please
compare the print on your parts with both reddish brown and dark brown parts
to make sure that this request is correct.
|
|
Author: | paulvdb | Posted: | Apr 12, 2019 03:50 | Subject: | Re: Inventory Change Request for Set 183-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right (Counterpart)
* Delete 1 Part bb72 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
* Add 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right
|
You forgot to also delete the string from the inventory. I did that for you.
That leaves only one set with part bb72c01 as counterpart. It is a bit before
my time, so I don't know if it would also have come assembled in that set.
Maybe I'll like into that when I have some free time, but not sure when that
will be.
|
|
Author: | paulvdb | Posted: | Apr 12, 2019 03:33 | Subject: | Re: Inventory Change Request for Set 4201-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, laulainendebra writes:
| Please make changes to the following inventory:
* Add 1 Part 3069b White Tile 1 x 2 with Groove (Counterpart)
Comments from Submitter:
Sticker with black letter "JL 4201" on white 1x2 tile. It shows that it is part of the sticker group but not listed as a counterpart.
|
As Stefaan mentioned, this sticker does not go on a 1x2 tile. The sticker goes
on a 2x10 brick and is already in the inventory as a counterpart.
|
|
Author: | paulvdb | Posted: | Apr 11, 2019 12:56 | Subject: | Re: Set 70822 | Viewed: | 43 times | Topic: | Catalog | |
|
| In Catalog, Vampi writes:
| Almost half of the past are not listed.Please complete
Thanks
Best Regards Vampi
|
Are you talking about the parts that are in the minifigs?
If you want to see their individual parts in the set inventory you can click
on the link at the top of the set inventory that says "Break Minifigs."
|
|
Author: | paulvdb | Posted: | Apr 10, 2019 11:56 | Subject: | Re: Inventory Change Request for Set 70327-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, good_old_bricks writes:
| Please make changes to the following inventory:
* Add 1 Part 3069bpb686 Light Bluish Gray Tile 1 x 2 with Black Lines and 3 Yellow and Orange Dots Pattern (Sticker) - Set 70327
|
There should be two of these in the set and they should be added as counterparts,
not regular items. I have accepted this request and made those changes.
|
|
Author: | paulvdb | Posted: | Apr 10, 2019 09:04 | Subject: | Re: We have a new Inventories Administrator! | Viewed: | 65 times | Topic: | Inventories | |
|
| In Inventories, Admin_Russell writes:
| Hello everyone,
I'm very pleased to announce that we have appointed a new Inventories Administrator,
to fill in the place that Marek left when he was promoted to Catalog Associate.
For this position we have selected member Paulvdb (Paul), whom many of you may
know as a catalog contributor, inventories contributor, and Forum participant.
He is also an established seller (since 2011, I believe) so many of you may know
him also through that channel.
Paul has distinguished himself especially by his work with older inventories,
sharing many sealed set contents data with the site for some of our precious
old vintage sets. We have found his contributions to be ultra reliable and think
he is going to do very well in this new role.
Congratulations are in order!
Russell
|
Thank you all. I hope to do well in this new position.
|
|
|
Author: | paulvdb | Posted: | Mar 22, 2019 13:11 | Subject: | Re: Are 8x10 remote controls identical inside? | Viewed: | 35 times | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| Hi
I have a 8x10 remote control without buttons that I want to sell in case anyone
can use it as spare parts (e.g. reuse the springs). But because I can't identify
it by the buttons, I need to know: Are the inside of all five variants the same
(e.g. only the print different)?
/Jan
|
On three of the images you can see them from the side where you plug in the wires.
Those three all look diffeent so that's one way to tell them apart. Unfortunately
the other two are photographed from the opposite side but maybe you can do a
Google search to see if you can find more images.
|
|
Author: | paulvdb | Posted: | Mar 9, 2019 02:30 | Subject: | Re: Inventory Change Request for Set 41326-12 | Viewed: | 38 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, timenet writes:
| There should only be 1 red flower in the inventory, I couldn't enter the
correction properly, sorry.
|
The set image shows two of them.
|
|
Author: | paulvdb | Posted: | Feb 24, 2019 04:57 | Subject: | Inventory Change Request for Set 6199-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 2599c01 Black Minifigure, Footgear Flippers, 2 on Sprue
* Change 1 Minifig {aqu009 Hydronaut 1 to aqu030 Hydronaut 1 with Black Flippers}
* Change 1 Minifig {aqu010 Hydronaut 2 to aqu031 Hydronaut 2 with Black Flippers}
Comments from Submitter:
Adding correct minifigs. Instructions show them being assembled with flippers.
|
|
Author: | paulvdb | Posted: | Feb 23, 2019 06:35 | Subject: | Inventory Change Request for Set 6199-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
|
|
Author: | paulvdb | Posted: | Feb 23, 2019 04:15 | Subject: | Re: Inventory Change Request for Set 6930-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
|
|
Interesting I checked some photos of a sealed copy of this set today.
If this is your copy, are the blue or light gray ring clips thin or thick?
What catalog (from what year) was included in this set?
Thanks in advance
|
|
|
Author: | paulvdb | Posted: | Feb 23, 2019 03:56 | Subject: | Re: Inventory Change Request for Set 6930-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
|
|
|
Author: | paulvdb | Posted: | Feb 23, 2019 03:55 | Subject: | Inventory Change Request for Set 6930-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
|
|
Author: | paulvdb | Posted: | Feb 23, 2019 00:04 | Subject: | Re: Inventory Change Request for Set 6657-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Delete 1 Part 3062b Light Gray Brick, Round 1 x 1 Open Stud (Extra)
* Change {1 to 2} Part Light Gray 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
Both should be regular because they are both used in some of the alternate models on the back of the box.
|
|
|
|
Author: | paulvdb | Posted: | Feb 23, 2019 00:04 | Subject: | Inventory Change Request for Set 6657-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3062b Light Gray Brick, Round 1 x 1 Open Stud (Extra)
* Change {1 to 2} Part Light Gray 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
Both should be regular because they are both used in some of the alternate models on the back of the box.
|
|
Author: | paulvdb | Posted: | Feb 16, 2019 05:41 | Subject: | Re: Inventory Change Request for Set 6659-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Hi,
I have worked with the inventory of this set.
Could you please share what catalog was included in the box? (what is the ID
number of the catalog?)
Thanks
Reza
|
117608-JA
|
Author: | paulvdb | Posted: | Feb 16, 2019 04:38 | Subject: | Re: Inventory Change Request for Set 6659-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| Please make changes to the following inventory:
* Change {2 to 1} Part Trans-Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Sealed set content. See photos in next post.
|
|
|
|
Author: | paulvdb | Posted: | Feb 16, 2019 04:38 | Subject: | Inventory Change Request for Set 6659-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 1} Part Trans-Yellow {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}
Comments from Submitter:
Sealed set content. See photos in next post.
|
|
Author: | paulvdb | Posted: | Feb 14, 2019 20:26 | Subject: | Inventory Change Request for Set 5985-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 48729 Black Bar 1L with Clip Mechanical Claw (match ID 3)
* Delete 2 Part 48729b Black Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Alternate) (match ID 3)
* Delete 2 Part 53989 White Arm Mechanical, Exo-Force / Bionicle
* Delete 1 Part 30375 White Torso Mechanical, Battle Droid
* Change {2 to 1} Part Trans-Dark Blue 4073 Plate, Round 1 x 1 Straight Side
* Change {15 to 14} Part Trans-Red 4073 Plate, Round 1 x 1 Straight Side
* Change {9 to 8} Part White 4740 Dish 2 x 2 Inverted (Radar)
* Change {8 to 6} Part White 2555 Tile, Modified 1 x 1 with Clip
Comments from Submitter:
These are in the inventory of the new droid/robot.
|
|
Author: | paulvdb | Posted: | Feb 14, 2019 20:25 | Subject: | Inventory Change Request for Set 5985-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig sp129 Space Police 3 Droid - K99 Robot
Comments from Submitter:
Adding new droid/robot minifig.
|
|
Author: | paulvdb | Posted: | Feb 14, 2019 00:46 | Subject: | Re: Inventory Change Request for Set 7288-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
2453b is already an alternate, so the regular can only be 2453a.
|
Not necessarily. If the alternate part was caught late and added to the catalog
late, then this set may have originally come with only 2453b. I will try to find
some evidence for this, but if I can't, this request will be rejected.
Cheers,
Randy
|
I checked this set in my personal collection. It has 2453a. It was bought new
sealed and never mixed with parts from other sets.
|
|
Author: | paulvdb | Posted: | Feb 13, 2019 10:26 | Subject: | Inventory Change Request for Set 5985-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Verified in sealed set contents.
Also, should the X99 robot be included in the inventory as a minifigure? The set description lists him as one of five minifigures in this set.
|
|
Author: | paulvdb | Posted: | Jan 20, 2019 00:27 | Subject: | Inventory Change Request for Set 6361-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 4215apb06 Blue Panel 1 x 4 x 3 - Solid Studs with Box and Arrows Pattern (Sticker) (Counterpart)
Comments from Submitter:
Instructions and other set images clearly show that the sticker is applied partially on the 1x2x3 panel so that it is centered on the container.
|
|
Author: | paulvdb | Posted: | Jan 5, 2019 08:31 | Subject: | Inventory Change Request for Set 7994-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3403 Black Turntable 4 x 4 Square Base
* Add 1 Part 3404 Black Turntable 4 x 4 Top
* Change 8 Part Dark Bluish Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
* Change 1 Part Black 3403c01 Turntable 4 x 4 Square Base with Top, Complete Assembly {Regular to Counterpart}
Comments from Submitter:
Sealed set contents. Turntable does not come assembled in this set and the 1x1x5 brick has a blocked open stud.
|
|
Author: | paulvdb | Posted: | Dec 31, 2018 00:05 | Subject: | Inventory Change Request for Set 7994-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3009pb214 Red Brick 1 x 6 with Blue 'CITY LINES' on White Background Pattern (Sticker) - Set 7994 (Counterpart)
|
|
Author: | paulvdb | Posted: | Dec 25, 2018 04:48 | Subject: | Please approve new sets | Viewed: | 134 times | Topic: | Catalog | Status: | Open | |
|
| According to the newsletter of a Dutch webshop the following new sets are now
available. Please approve them.
LEGO® Friends
41354
41355
41356
41357
41358
41359
41360
41361
41363
41364
41365
41366
41367
41368
41369
41383
LEGO® Technic
42088
42089
42090
42091
42092
42093
42094
42095
42096
LEGO® City
60206
60207
60208
60209
60210
60212
60213
60214
60215
60216
60218
60219
60220
60221
60222
60223
60239
60240
LEGO® DE LEGO FILM 2™
70820
70821
70822
70823
70824
70825
70826
70827
70828
70829
70830
70831
70832
70836
70841
|
|
Author: | paulvdb | Posted: | Dec 18, 2018 14:53 | Subject: | Re: 3865 official or homemade parts? | Viewed: | 49 times | Topic: | Catalog | |
|
| In Catalog, normann1974 writes:
| Hi
I just bought used that was almost complete. But I noticed that the
four baseplates seems to have been custom made from a larger baseplate,
because the two sides are clearly a lighter shade of green (I guess this is where
the cuts have been made), and that three corners are not round, but have been
trimmed to give a rounded look.
Are these homemade, or it is possible that LEGO produced these plates from larger
plates (e.g. 1x 16x32 into 4x 8x16) in the late 70's to save the price of
making a 8x16 baseplate mold?
/Jan
|
There was another recent discussion about this where it was confirmed that Lego
would produce large baseplates and cut them into smaller baseplates.
|
|
Author: | paulvdb | Posted: | Dec 16, 2018 04:06 | Subject: | Re: Extra Sticker set in Indoraptor Rampage | Viewed: | 24 times | Topic: | Inventories | |
|
| In Inventories, StormChaser writes:
| In Inventories, randyf writes:
| It's not unheard of to get a duplicate sticker sheet in a set here or there.
It has happened to me two or three times.
|
We may have differing opinions on this - not sure because we've never discussed
it. My opinion is that a sticker is a part. We consider it a part and TLG considers
it a part and includes it in the part count.
If you have an extra one of these parts, then I believe it fits the definition
of an extra part and should be included in the set inventory as such:
Were sticker sheets systematically included as extras in some sets in the way
that other parts are? We really don't know, since we haven't been keeping
data on extra appearances. The current inventory guidelines don't address
how frequently an extra must appear in order to be added to the inventory, but
the unwritten rule has been one time.
What are your thoughts?
|
In my experience extra sticker sheets are caused by packing errors and they are
not systematically included as extras. This is supported by the fact that I've
bought multiples of the same set from the same supplier and found an extra sheet
in only one of the sets.
In my opinion extras should only be extra parts that Lego put in sets for at
least one production run of the set. For example there are some sets that were
first produced before 1x1 plates were included as extras but later production
runs did include them as extras. For those sets I support the inclusion of them
as extra parts.
But the sticker sheets were clearly not intended to be included as extra parts
and don't appear often enough to justify including them as extra parts.
|
|
Author: | paulvdb | Posted: | Dec 9, 2018 01:28 | Subject: | Re: Inventory Change Request for Set 10230-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
I got this set when it was new and have looked for it several times to fix the inventory. Today I stumbled upon it by accident.
Concerning taps, what is our endgame? I have LBG nozzle with no hole and that is in the inventory as alternates. (no information on the white ones because I never built that building) But no one has come forward with a no nozzle for many years. I tried to study the change log to figure out a clear timeline and I got lost. But I think the undetermined taps should either be turned to hole in nozzle or taken out of the inventory.
|
As you didn't build it from sealed contents I just formaly confirm "a" variant
of this part. It is visible in this review fro sealed set contents
https://www.youtube.com/watch?v=KQjEOw3FWx8
LBG tap is in this review also visible as "b" variant (unfortunetly there is
no way to confirm white one, way of use in the build make it almost impossible)
So about this tap I looked at this problem.
As I see we are getting close to finsh sorting them. Only 26 sets, 1 book ant
3 gears left to check and sort. Other almost 900 sets have particular variant
in their inventory So I think we have a pattern and a time line for this
part quite checked and some conclusions can be made for this part
When you comparing timline there is some interesting pattern.
As you can see undetermined one is left in sets from following years:
https://www.bricklink.com/catalogItemIn.asp?P=4599&v=3&in=S
2009 - 11 sets
2010 - 7 sets
2011 - 4 sets
2012 - 4 sets
In the meantime when dealing with your request I corrected undetermined for two
sets from 2012 (to look if something could be done here) these two set hadn't
alternate tap in their inventories so it was simple checking what variant is
confirmed there in sealed set content.
https://www.bricklink.com/message.asp?ID=1118887
https://www.bricklink.com/message.asp?ID=1118885
So from 2012 we have only four left. Three sets (10230 - set you are asking,
4205, 9463) have confirmed variant in alternate section and it is "b". Fourth
one have only undetermined variant but is tough one, it is now rare set and I
couldn't be able to find any reliable source to check it.
As you check timeline for "a" variant
https://www.bricklink.com/catalogItemIn.asp?P=4599a&in=S
you will see that confirmed appearance of this older one is only in a few sets
in above years:
2009 - 9 sets
2010 - 3 sets
2011 - 2 sets only! (and both have it in alternate section)
no confirmed sets with "a" from 2012 so far.
So check timline for "b" you will see that confirmed appearance of this new one
is in many sets in above years:
2009- 30 sets
2010 - 32 sets
2011 - 39 sets
2012 - 46 sets!
So there are 46 sets from 2012 with confirmed "b" variant an none found with
"a" variant. We have three now with undetermined which are also confirmed having
"b" but in alternate section. So in this case seeing also that in 2011 only two
were confirmed (from 39 having "b") with "a" I think in this three sets we can
delete undetermine and move "b" to regular section. If somone find "a" variant
in them confirmed from sealed set contents we can always add it to alternate
as in those from 2011.
I didn't have time to check the others left from other years. But in free
time I will come back to this problem and see if more can be cleared here from
undetermine to finally finish sorting these taps, as I said we are very near
the end here.
But before I make such change for these three from 2012:
I will wait for Randy opinion if he agree with me. Or maybe he have different
idea how to deal in this case or some more sources to check.
Randy your opinion?
Or we still wait for a proof for "a" ?
I know I writen this
https://www.bricklink.com/message.asp?ID=1103839 but after above analysis
I've changed my mind. First we could try to once again maybe confirm "b"
for these three sets and then get rid of undetermined from them.
P.S.
about above message link from mentioned threat https://www.bricklink.com/message.asp?ID=1103746.
There was a try to get rid of these undetermine but it was wrong because submitter
tried without a prof change simple undetermined to old variant "a" and for this
we must have proof from reliable sources. Especially in this case for 2012 set
when no 2012 was yet confired having this variant even as alternate.
|
Based on the change log for 10230 it seems that both variants were found in that
set. The white 4599 was added to the inventory in December 2013 by TMX37 when
4599b was already in the inventory. Unfortunately the forum messages from that
time are lost, butthis seems to indicate that TMX37 found a tap with hole.
Based on the log we can also conclude that the set was originally inventoried
was white 4599b and light bluish gray 4599. The fact that it was inventoried
with different variants in the two colors probably means that the light bluish
gray tap had was the variant with the hole.
|
|
Author: | paulvdb | Posted: | Dec 3, 2018 14:09 | Subject: | Re: Inventory Change Request for Set 6648-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
|
So according to your information and the unboxing from the link in this thread,
there seem to be two versions of the set that break down as follows:
--------------------------------------------------------------------------------
First Version included:
in White (1x)
[p=4073c01] in Trans-Yellow (2x) and Black (2x)
in White (1x)
--------------------------------------------------------------------------------
Second Version included:
* | | 2440pb005 Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge with Red and Green Stripes and 'Octan' Pattern Parts: Vehicle |
in Trans-Yellow (5x - 1 extra) and Black (5x - 1 extra)
in White (1x)
--------------------------------------------------------------------------------
All right, I think we got this figured out. I will get the inventory adjusted.
Thanks for your help everyone!
Cheers,
Randy
|
Can we be sure that all those part variants were changed at the same time? Lego
usually doesn't throw away old parts, so it's possible that there were
sets where some parts were the old variants while others were already replaced
with the new variants.
|
|
Author: | paulvdb | Posted: | Dec 3, 2018 04:50 | Subject: | Re: Inventory Change Request for Set 6681-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
|
(3) I am trying to establish a very firm timeline for the 4073s on sprue. As
of right now, my timeline stretches from 1984-1991. This set is a few years outside
of that current timeline, so I don't want to add in any information yet that
is not concrete.
|
This set is before the beginning of your timeline, so should certainly have them
on a sprue. As far as I remember in the earlier sets they always came on a sprue.
Somewhere around 1990 (give or take a few years) they no longer came with the
sprue.
|
|
Author: | paulvdb | Posted: | Dec 3, 2018 04:44 | Subject: | Inventory Change Request for Set 60154-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 15210pb044 White Road Sign Clip-on 2 x 2 Square Open O Clip with Bus and 'BUS STOP' on Green Background Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 3069bpb678 White Tile 1 x 2 with 'CK60154' License Plate Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 30350bpb072 Dark Bluish Gray Tile, Modified 2 x 3 with 2 Clips with Black Baby Carriage and Bicycle on White Background Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 30350bpb073 Dark Bluish Gray Tile, Modified 2 x 3 with 2 Clips with 'CK60154' License Plate Pattern (Sticker) - Set 60154 (Counterpart)
|
|
Author: | paulvdb | Posted: | Dec 2, 2018 08:22 | Subject: | Inventory Change Request for Set 60154-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 3)
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove} {match ID 0 to 3}
Comments from Submitter:
Found both variants in sealed sets.
|
|
Author: | paulvdb | Posted: | Dec 2, 2018 02:31 | Subject: | Inventory Change Request for Set 60154-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 46212pb017 Trans-Clear Brick 1 x 2 x 5 without Side Supports with Music Notes, Palm Tree and 'BEACH PARTY' Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 4181pb056 Black Door 1 x 4 x 5 Train Left with Baby Carriage and Green Horizontal Line Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 4182pb057 Black Door 1 x 4 x 5 Train Right with Minifigure in Wheelchair and Green Horizontal Line Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 4182pb056 Black Door 1 x 4 x 5 Train Right with Train Logo and Green Horizontal Line Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 2431pb551 Green Tile 1 x 4 with 'ELECTRIC HYBRID' Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 6636pb171 White Tile 1 x 6 with 'NEWSSTAND' on Black and Lime Background Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 3068bpb1192 Green Tile 2 x 2 with Lime Recycling Arrows Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 87079pb530 Black Tile 2 x 4 with '242 BRICK SQ. VIA CITY CENTER' Pattern (Sticker) - Set 60154 (Counterpart)
* Add 1 Part 87079pb529 Light Bluish Gray Tile 2 x 4 with Bus Map and Schedule Pattern (Sticker) - Set 60154 (Counterpart)
|
|
Author: | paulvdb | Posted: | Dec 1, 2018 04:55 | Subject: | Inventory Change Request for Set 60154-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 35157 Trans-Black Glass for Train Door with Lip on All Sides (Alternate) (match ID 2)
* Change 3 Part Trans-Black 4183 Glass for Train Door with Lip on Top and Bottom {match ID 0 to 2}
Comments from Submitter:
I found 35157 in sealed sets.
|
|
Author: | paulvdb | Posted: | Nov 21, 2018 13:44 | Subject: | Re: 4x4 dish with open stud | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, leopard37 writes:
| In Catalog, paulvdb writes:
| In Catalog, StormChaser writes:
| In Catalog, Admiral_Brick writes:
| 35394 is not an alternative design number of the old 4x4 dish.
It's a new design with a hole/open stud in the middle.
|
We'd need to see some hard evidence. I've just now looked at a number
of different sources and have found none.
|
I think it's just an optical illusion caused be the lighting of that render.
If you look at the image for trans light blue on that page you can clearly see
that it has a closed stud with Lego logo.
|
Curiosity: How are these renders made? Are they pulled from LEGO's website?
Thanks,
Tyson.
|
Brickset uses the images from Lego's replacement parts website.
|
|
Author: | paulvdb | Posted: | Nov 21, 2018 13:37 | Subject: | Re: 4x4 dish with open stud | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, Admiral_Brick writes:
| 35394 is not an alternative design number of the old 4x4 dish.
It's a new design with a hole/open stud in the middle.
|
We'd need to see some hard evidence. I've just now looked at a number
of different sources and have found none.
|
I think it's just an optical illusion caused be the lighting of that render.
If you look at the image for trans light blue on that page you can clearly see
that it has a closed stud with Lego logo.
|
|
Author: | paulvdb | Posted: | Nov 1, 2018 07:15 | Subject: | Re: New Catalog Roadmap | Viewed: | 39 times | Topic: | Catalog | |
|
| In Catalog, randyf writes:
|
Found another one in the notes on my desk!
I would like to see a part category created called "Cardboard Sleeve". This category
would include any cardboard sleeves that originally come in sets. Why is this
important?
(1) These cardboard sleeves could be numbered according to the number on the
cardboard sleeve so that they are searchable.
(2) These cardboard sleeves could then be added to set inventories as they originally
came packaged.
(3) These cardboard sleeves could then be inventoried so they would not need
to be opened to know what is in them.
(4) Additional notes on catalog entries could be completely removed and cleaned
up (such as the ones on part 522).
(5) People would have no reason to keep trying to add the codes on the cardboard
sleeves as PCCs to catalog entries (such as the ones on part 522).
Cheers,
Randy
|
Good idea. We already recently added all the tool packs that came packed in plastic
bags. This seems like a similar thing.
|
|
Author: | paulvdb | Posted: | Oct 24, 2018 04:58 | Subject: | Re: Inventory Change Request for Set 9525-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, Hygrotus writes:
Thanks. There are probably also some sets where I submitted inventory change
requests to add 3794 as alternate. Those can also be changed. I don't know
if there's an easy way to find those sets.
|
https://www.bricklink.com/catalogInvChangeItem.asp?chgUserID=109612&v=3
I dig through this
There where you add 3794 as an alternate I changed. Sometimes also when adding
3794b as an alternate in change request you wrote that you found both variants
when parting particular sets so there I also changed undetermine to a. Currently
to all requests before the 22th of April 2014 no additional information in masseages
were preserved. So there I changed only when you added 3794 as an alternate.
Finally 34 sets could be changed https://www.bricklink.com/catalogInvChangeItem.asp
|
Thanks for doing all that. I knew about that page to find all my approved inventory
change requests, but I didn't want to go through all of them so I was hoping
that there was a way to narrow it down to find only the ones that involve a specific
part.
|
|
Author: | paulvdb | Posted: | Oct 23, 2018 23:20 | Subject: | Re: Inventory Change Request for Set 9525-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
Thanks. There are probably also some sets where I submitted inventory change
requests to add 3794 as alternate. Those can also be changed. I don't know
if there's an easy way to find those sets.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|