Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | axaday | Posted: | Apr 18, 2019 11:40 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
This is very likely something so massive that we don't even want to think
about it...but a possible solution to the minifig definition problem on the road
map is to create plain and deluxe minifigs. For any minifig wearing something
on its neck, hands, or feet there could be two entries: Plain with only strictly
minifig pars and one with everything that the instructions or box shows. If
we did that then this set could have the Deluxe Ursula and an extra amulet and
then a plain Ursula and a spued amulet as an alternate. It would give those
silly dressed up Belville dolls some actual legitimacy and would make room in
the catalog for the absolutely stunning Firefly seen on the box for 76117. If
you haven't seen that guy blasting off with his jetpack and firing a killshot
from his hand cannon go see it right now.
|
A lot of people like to sell Thor with a hammer or axe, Batman with a Batarang
and such. And all those minifigs with neck brackets attached to nothing but
their necks make sense only as a technicality to our rules. Practically any
customer would rather buy it either without the neck bracket or with whatever
was supposed to connect to it.
|
|
Author: | randyf | Posted: | Apr 18, 2019 11:37 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
Does it meet the definition of anything else? It is all alone out in a cold,
cruel world.
|
Yes, it does. It meets the definition of a Regular Item. However, it follows
a stipulation from that same help page above:
"Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprue are used in minifigures. In that case, the parts from
the sprue that are not used in minifigures are included in this section."
This is how these parts are handled in the inventories. Until a later time when
minifigs are just considered another possible assembly from a set and all of
their parts are included separately in the Regular Items section, these parts
follow the above guideline.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Apr 18, 2019 11:37 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
This is very likely something so massive that we don't even want to think
about it...but a possible solution to the minifig definition problem on the road
map is to create plain and deluxe minifigs. For any minifig wearing something
on its neck, hands, or feet there could be two entries: Plain with only strictly
minifig pars and one with everything that the instructions or box shows. If
we did that then this set could have the Deluxe Ursula and an extra amulet and
then a plain Ursula and a spued amulet as an alternate. It would give those
silly dressed up Belville dolls some actual legitimacy and would make room in
the catalog for the absolutely stunning Firefly seen on the box for 76117. If
you haven't seen that guy blasting off with his jetpack and firing a killshot
from his hand cannon go see it right now.
|
|
Author: | axaday | Posted: | Apr 18, 2019 11:32 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
Does it meet the definition of anything else? It is all alone out in a cold,
cruel world.
|
|
Author: | randyf | Posted: | Apr 18, 2019 11:25 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
|
Author: | axaday | Posted: | Apr 18, 2019 10:14 | Subject: | Inventory Change Request for Set 41145-1 | Viewed: | 61 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
|
Author: | Turez | Posted: | Apr 18, 2019 04:48 | Subject: | Inventory Change Request for Set 10258-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30292pb036L Dark Blue Flag 7 x 3 with Rod with 'EXPLORE LONDON' / Brick-Built Biscuits Pattern Model Left Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb036R Dark Blue Flag 7 x 3 with Rod with 'EXPLORE LONDON' / Brick-Built Biscuits Pattern Model Right Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb035L Dark Blue Flag 7 x 3 with Rod with 'High Tea Requires' / Partial United Kingdom Flag (Union Jack) Pattern Model Left Front Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb035R Dark Blue Flag 7 x 3 with Rod with 'High Tea Requires' / Partial United Kingdom Flag (Union Jack) Pattern Model Right Back Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb037L Dark Blue Flag 7 x 3 with Rod with 'Quality Biscuits' / Partial United Kingdom Flag (Union Jack) Pattern Model Left Back Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb037R Dark Blue Flag 7 x 3 with Rod with 'Quality Biscuits' / Partial United Kingdom Flag (Union Jack) Pattern Model Right Front Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 4346pb38 Black Container, Box 2 x 2 x 2 Door with Slot and 'USED TICKETS' Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 60601pb019 Trans-Black Glass for Window 1 x 2 x 2 with White '9' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 60602pb10 Trans-Black Glass for Window 1 x 2 x 3 with '9', 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 60602pb11 Trans-Black Glass for Window 1 x 2 x 3 with 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 85984pb211 Red Slope 30 1 x 2 x 2/3 with 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' on White Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 85984pb212 Red Slope 30 1 x 2 x 2/3 with White '9' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 2 Part 15068pb168 Tan Slope, Curved 2 x 2 No Studs with Two Black Hash Marks Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 2431pb571 Black Tile 1 x 4 with White 'MGW 10258' License Plate on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 2 Part 6636pb191 Black Tile 1 x 6 with 'BRICKSTON' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 26603pb039 Black Tile 2 x 3 with 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 26603pb038 Yellow Tile 2 x 3 with Black 'MGW 10258' License Plate on Yellow Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 24607pb02 Trans-Clear Windscreen 2 x 10 x 3 with Red Vertical Stripe Pattern (Sticker) - Set 10258 (Counterpart)
|
|
Author: | Turez | Posted: | Apr 18, 2019 04:33 | Subject: | Inventory Change Request for Set 60159-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 14719pb001L Bright Light Orange Tile 2 x 2 Corner with Silver Tread Plate Pattern Model Left Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 14719pb001R Bright Light Orange Tile 2 x 2 Corner with Silver Tread Plate Pattern Model Right Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3622pb108L Bright Light Orange Brick 1 x 3 with Door Handle and Black Stripe Pattern Model Left Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3622pb108R Bright Light Orange Brick 1 x 3 with Door Handle and Black Stripe Pattern Model Right Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3009pb216L Bright Light Orange Brick 1 x 6 with Black '60159', Panther Head and Black Stripe Pattern Model Left Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3009pb216R Bright Light Orange Brick 1 x 6 with Black '60159', Panther Head and Black Stripe Pattern Model Right Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 13269pb005 Bright Light Orange Slope 45 6 x 4 Double / 33 (Train Roof) with Leopard Head, Leaves and Grille Pattern (Sticker) - Set 60159 (Counterpart)
* Add 2 Part 2431pb570 Bright Light Orange Tile 1 x 4 with Silver Tread Plate Pattern (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3069bpb710 Black Tile 1 x 2 with Bright Light Orange '60159' on Black Background Pattern (Sticker) - Set 60159 (Counterpart)
|
|
Author: | dmaster.hu | Posted: | Apr 18, 2019 04:00 | Subject: | Inventory Change Request for Set 70650-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 64567 Black Minifigure, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 21459 Black Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 20482 Black Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Add 1 Part 15392 Dark Bluish Gray Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter (Extra)
* Add 1 Part 54200 Dark Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
|
|
Author: | randyf | Posted: | Apr 17, 2019 14:36 | Subject: | Re: Inventory Change Request for Book 9781591747697 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, guardiangames writes:
| Please make changes to the following inventory:
* Add 2 Part x89 Black Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 (Alternate) (match ID 6)
Comments from Submitter:
These thick round rubberbands are in my sealed set as an alternative to the black technic wedge belt tire.
|
I am sorry that it has taken me a bit to get back to you concerning this request,
but thank you for bringing this to my attention.
I have been doing a lot of research about this book, and I have found that there
are a couple of large errors in the inventory which should never have been accepted.
I have reviewed at least 40-50 of these books as a sealed set over the last few
days, and I will be taking a little time to first correct the original inventory
before making any other changes.
Judging from many of these books that I have reviewed, the black belts do not
seem to be either part x89 in your request or part 2815 that was added to the
inventory in August 2017:
https://www.bricklink.com/messageThread.asp?ID=224516
What gives me confidence in this conclusion is also a prior thread attached to
a prior change request for this book:
https://www.bricklink.com/messageThread.asp?ID=176325
Thanks for your patience as I try to figure all of this out. I may have to purchase
a couple of the copies I was looking at to get the complete picture.
Cheers,
Randy
|
Okay, I purchased two of these books, one with the black large wheels and one
with the light bluish gray large wheels. The books have different back covers
and some different pages inside. Therefore, I believe these two books are from
different print runs of the book over a period of years. In both of them, the
black rubber belts are the same. It is quite obvious at first glance that these
belts are neither part x89 or any other belt currently in the catalog. I have
never seen one like it. I will get this new belt added to the catalog and then
correct the inventory. After that, this request will be rejected since it is
not correct.
Cheers,
Randy
|
The new rubber belt has been added to the catalog as
[p=bb890]
and has been added to the inventory of
This request is now complete and will be closed.
Cheers,
Randy
|
|
Author: | Turez | Posted: | Apr 17, 2019 07:01 | Subject: | Inventory Change Request for Set 75953-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87421pb045 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 1 Outside and Portrait of Wizard Type 1 Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb046 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 2 Outside and Gryffindor Banner Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb047 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 1 Outside and Portrait of Men with Dog Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb048 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 2 Outside and Portrait of Woman and Dog Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb049 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 1 Outside and Portrait of Wizard Type 2 Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb050 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 2 Outside and Portrait of Puppet Player Inside Pattern (Stickers) - Set 75953 (Counterpart)
|
|
Author: | elias3 | Posted: | Apr 17, 2019 05:43 | Subject: | Inventory Change Request for Set 60128-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
Author: | Maximilien | Posted: | Apr 17, 2019 04:55 | Subject: | Re: Inventory Change Request for Set 7146-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| Thanks again.
I'm definitively blind.
|
Author: | Hygrotus | Posted: | Apr 17, 2019 02:48 | Subject: | Inventory Change Request for Set 75953-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 6259pb037 Reddish Brown Cylinder Half 2 x 4 x 4 with Tree Bark Lines Pattern 1 (Sticker) - Set 75953 (Counterpart)
* Add 1 Part 6259pb038 Reddish Brown Cylinder Half 2 x 4 x 4 with Tree Bark Lines Pattern 2 (Sticker) - Set 75953 (Counterpart)
|
|
Author: | randyipp | Posted: | Apr 16, 2019 18:04 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
Before approving this I would like confirmation that the print really is dark
brown. In the other discussion topic I only saw people saying that the print
on their parts is not reddish brown. But printed colors can sometimes look a
bit different because of the background color on which it is printed. So please
compare the print on your parts with both reddish brown and dark brown parts
to make sure that this request is correct.
|
Thanks for taking the lead on this, Paul. I have been reviewing some YouTube
set reviews. It is hard to tell colors from many of them, but I think I have
seen both versions. If the OP is correct (and there is no reason to doubt otherwise),
I would like to have confirmation from someone who has a Reddish Brown version
in the set before we add an alternate instead of do an outright change.
Cheers,
Randy
|
I have a Batcave set but it is sealed still so I don't want to open it yet
to add that to the comparison, but I have the town hall. Town hall globe is
the reddish brown on right and the one from the ship in a bottle on left, with
a dark brown tile.
|
|
|
Author: | randyf | Posted: | Apr 16, 2019 17:33 | Subject: | Re: Inventory Change Request for Set 7146-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, Maximilien writes:
| Please make changes to the following inventory:
* Delete 43 Part 2412b Blue Tile, Modified 1 x 2 Grille with Bottom Groove / Lip
Comments from Submitter:
I only have 42 blue parts 2412b in my set and I only see 42 of them on the instructions. 18 on each wings, 3 around the Dark Gray Support, 2 under the Dark Gray Dish 4 x 4 Inverted and 1 in the back. Where is the 43th ?
|
The 43rd is on Step 3 of Page 2 (the floor of the cockpit).
Since the inventory is correct concerning this part, this request will not be
accepted.
Cheers,
Randy
|
|
Author: | Maximilien | Posted: | Apr 16, 2019 16:45 | Subject: | Inventory Change Request for Set 7146-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 43 Part 2412b Blue Tile, Modified 1 x 2 Grille with Bottom Groove / Lip
Comments from Submitter:
I only have 42 blue parts 2412b in my set and I only see 42 of them on the instructions. 18 on each wings, 3 around the Dark Gray Support, 2 under the Dark Gray Dish 4 x 4 Inverted and 1 in the back. Where is the 43th ?
|
|
Author: | normann1974 | Posted: | Apr 16, 2019 14:27 | Subject: | Inventory Change Request for Set 42078-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3070b Trans-Clear Tile 1 x 1 with Groove (3070) (Extra)
* Add 2 Part 3070b Trans-Clear Tile 1 x 1 with Groove (3070) (Extra)
Comments from Submitter:
I just parted out this set and found 5 tiles. Delete/add instead of change because form is still broken. One wonders if this will ever be fixed.
|
|
Author: | randyf | Posted: | Apr 16, 2019 12:33 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
Before approving this I would like confirmation that the print really is dark
brown. In the other discussion topic I only saw people saying that the print
on their parts is not reddish brown. But printed colors can sometimes look a
bit different because of the background color on which it is printed. So please
compare the print on your parts with both reddish brown and dark brown parts
to make sure that this request is correct.
|
Thanks for taking the lead on this, Paul. I have been reviewing some YouTube
set reviews. It is hard to tell colors from many of them, but I think I have
seen both versions. If the OP is correct (and there is no reason to doubt otherwise),
I would like to have confirmation from someone who has a Reddish Brown version
in the set before we add an alternate instead of do an outright change.
Cheers,
Randy
|
|
Author: | elias3 | Posted: | Apr 16, 2019 10:38 | Subject: | Inventory Change Request for Set 60054-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate) {match ID 1 to 2}
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | paulvdb | Posted: | Apr 16, 2019 06:55 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
Before approving this I would like confirmation that the print really is dark
brown. In the other discussion topic I only saw people saying that the print
on their parts is not reddish brown. But printed colors can sometimes look a
bit different because of the background color on which it is printed. So please
compare the print on your parts with both reddish brown and dark brown parts
to make sure that this request is correct.
|
|
Author: | elias3 | Posted: | Apr 16, 2019 05:14 | Subject: | Inventory Change Request for Set 4434-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | randyipp | Posted: | Apr 15, 2019 16:53 | Subject: | Inventory Change Request for Set 21313-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
|
Author: | Brixalotl | Posted: | Apr 15, 2019 13:48 | Subject: | Inventory Change Request for Set 70403-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 10 Part 15571 Red Slope 45 2 x 1 Triple with Bottom Stud Holder (Alternate) (match ID 3)
Comments from Submitter:
found both variants during part out, thanks
|
|
Author: | Gargan | Posted: | Apr 14, 2019 13:21 | Subject: | Inventory Change Request for Set 75185-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 30377 Black Arm Mechanical, Battle Droid (Extra)
* Add 1 Part 64567 Black Minifigure, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 30170 Dark Bluish Gray Minifigure, Visor Goggles (Extra)
* Add 1 Part 61482 Light Bluish Gray Minifigure, Utensil Handcuffs (Extra)
* Add 1 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 64567 Metallic Silver Minifigure, Weapon Lightsaber Hilt Straight (Extra)
* Add 2 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra)
* Add 1 Part 60849 Black Minifigure, Utensil Hose Nozzle Elaborate (Extra)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
Source: Sealed Set
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:57 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| Checked again, one additional missile there, 8 regular used for building.
In Inventories Requests, 1977_mauro writes:
| OK, I will recheck, if I have forgotten to add the missile somewhere in the set...
In Inventories Requests, SylvainLS writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:45 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| OK, I will recheck, if I have forgotten to add the missile somewhere in the set...
In Inventories Requests, SylvainLS writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
|
Author: | SylvainLS | Posted: | Apr 14, 2019 12:35 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:19 | Subject: | Inventory Change Request for Set 70620-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
|
Author: | randyf | Posted: | Apr 12, 2019 19:10 | Subject: | Re: Inventory Change Request for Set 163-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, aefferen writes:
| Please make changes to the following inventory:
* Add 1 Part 3020 Blue Plate 2 x 4
Comments from Submitter:
Inventory says 2 pieces of blue plate 2x4. In the instruction 3 are used.
|
Great catch!
There are indeed three used to build the crane-car model (model C). One is used
in Step 1, one is used in Step 5, and one is used in Step 7. They are highlighted
in the finished build below.
Thanks for contributing to the accuracy of the BrickLink inventories.
Cheers,
Randy
|
|
|
Author: | FreeStorm | Posted: | Apr 12, 2019 16:01 | Subject: | Re: Inventory Change Request for Set 163-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, aefferen writes:
| Please make changes to the following inventory:
* Add 1 Part 3020 Blue Plate 2 x 4
Comments from Submitter:
Inventory says 2 pieces of blue plate 2x4. In the instruction 3 are used.
|
I would say 2 parts is right.
You can build 3 different models with this set.
For model A
2 on step 1
For model B
0
For model c
1 on step 1
1 on step 7
-Fred
|
Author: | aefferen | Posted: | Apr 12, 2019 15:08 | Subject: | Inventory Change Request for Set 163-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3020 Blue Plate 2 x 4
Comments from Submitter:
Inventory says 2 pieces of blue plate 2x4. In the instruction 3 are used.
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:41 | Subject: | Inventory Change Request for Set 8041-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87086pb043 Black Technic, Panel Fairing # 2 Small Smooth Short, Side B with LEGO Logo, 'SMOOTH OIL' and 'V8' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:41 | Subject: | Inventory Change Request for Set 8041-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87080pb043 Black Technic, Panel Fairing # 1 Small Smooth Short, Side A with 'light@night' and '52' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:40 | Subject: | Inventory Change Request for Set 42041-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87086pb043 Black Technic, Panel Fairing # 2 Small Smooth Short, Side B with LEGO Logo, 'SMOOTH OIL' and 'V8' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:39 | Subject: | Inventory Change Request for Set 42041-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87080pb043 Black Technic, Panel Fairing # 1 Small Smooth Short, Side A with 'light@night' and '52' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
|
Author: | paulvdb | Posted: | Apr 12, 2019 03:50 | Subject: | Re: Inventory Change Request for Set 183-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right (Counterpart)
* Delete 1 Part bb72 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
* Add 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right
|
You forgot to also delete the string from the inventory. I did that for you.
That leaves only one set with part bb72c01 as counterpart. It is a bit before
my time, so I don't know if it would also have come assembled in that set.
Maybe I'll like into that when I have some free time, but not sure when that
will be.
|
|
Author: | paulvdb | Posted: | Apr 12, 2019 03:33 | Subject: | Re: Inventory Change Request for Set 4201-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, laulainendebra writes:
| Please make changes to the following inventory:
* Add 1 Part 3069b White Tile 1 x 2 with Groove (Counterpart)
Comments from Submitter:
Sticker with black letter "JL 4201" on white 1x2 tile. It shows that it is part of the sticker group but not listed as a counterpart.
|
As Stefaan mentioned, this sticker does not go on a 1x2 tile. The sticker goes
on a 2x10 brick and is already in the inventory as a counterpart.
|
|
Author: | SezaR | Posted: | Apr 12, 2019 03:23 | Subject: | Re: Inventory Change Request for Set 183-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right (Counterpart)
* Delete 1 Part bb72 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
* Add 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right
|
The hook came assembled in my photos of three sealed copies of this set(photos
1,2,6). In one photo, we cannot clearly see the hook but it is certainly there.
In all my photos, sealed copy or used copy, the hook is the right version.
|
|
|
Author: | elias3 | Posted: | Apr 12, 2019 03:12 | Subject: | Re: Inventory Change Request for Set 4201-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
Hi
And also... both stickers are already in the catalog as counterpart.
the OP has a sticker on a wrong part
Stefaan
|
|
Author: | joesecc | Posted: | Apr 12, 2019 03:04 | Subject: | Inventory Change Request for Set 7713-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 47759pb13 Black Wedge 2 x 4 Triple with Yellow and Black Stripes Pattern (Sticker) - Set 7713 (Counterpart)
Comments from Submitter:
part 47759 with sticker applied.
|
|
Author: | SezaR | Posted: | Apr 12, 2019 03:01 | Subject: | Inventory Change Request for Set 183-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right (Counterpart)
* Delete 1 Part bb72 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
* Add 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right
|
|
Author: | randyf | Posted: | Apr 12, 2019 02:59 | Subject: | Re: Inventory Change Request for Set 3669-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Add 1 Part 4000 Yellow Ladder 16 x 4 with Semi-Circular Pivot
* Add 1 Part 5 Red Fabuland Fire Ladder Holder 2 x 4 x 2 1/2
* Add 1 Part fabal6 Yellow Fabuland Fire Ladder (Counterpart)
* Delete 1 Part fabal6 Yellow Fabuland Fire Ladder
Comments from Submitter:
The ladder and ladder holder came as separate parts in a sealed set. Image to follow.
|
|
|
|
Author: | randyf | Posted: | Apr 12, 2019 02:58 | Subject: | Inventory Change Request for Set 3669-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4000 Yellow Ladder 16 x 4 with Semi-Circular Pivot
* Add 1 Part 5 Red Fabuland Fire Ladder Holder 2 x 4 x 2 1/2
* Add 1 Part fabal6 Yellow Fabuland Fire Ladder (Counterpart)
* Delete 1 Part fabal6 Yellow Fabuland Fire Ladder
Comments from Submitter:
The ladder and ladder holder came as separate parts in a sealed set. Image to follow.
|
|
Author: | laulainendebra | Posted: | Apr 11, 2019 23:58 | Subject: | Inventory Change Request for Set 4201-1 | Viewed: | 42 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069b White Tile 1 x 2 with Groove (Counterpart)
Comments from Submitter:
Sticker with black letter "JL 4201" on white 1x2 tile. It shows that it is part of the sticker group but not listed as a counterpart.
|
|
Author: | axaday | Posted: | Apr 11, 2019 23:19 | Subject: | Re: Inventory Change Request for Set 7533-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
You don't know how many sleepless nights I have been through wondering when
these Clikits pieces would ever be determined.
|
I have some idea. That's why I got right on it.
This one is a win-win-win-win. Catalog gets a weight and 4 undetermined pieces,
I get a little profit, and I have a cornered market. My daughter and I will
build the jewelry and it'll come out of her toy budget!
|
|
Author: | Give.Me.A.Brick | Posted: | Apr 11, 2019 20:28 | Subject: | Re: Inventory Change Request for Set 3315-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Give.Me.A.Brick writes:
| Please make changes to the following inventory:
* Delete 1 Part 60474 Medium Blue Plate, Round 4 x 4 with Hole (Alternate) (match ID 9)
Comments from Submitter:
Different runs of this set come with different shades of Bright Light Blue, but no run that I've came across with came with Medium Blue color for this Plate.
|
I agree with you. I have seen different shades of Bright Light Blue, but I have
never seen this part in Medium Blue.
Cheers,
Randy
|
Thank you Randy.
|
|
Author: | randyf | Posted: | Apr 11, 2019 20:07 | Subject: | Re: Inventory Change Request for Set 7533-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
You don't know how many sleepless nights I have been through wondering when
these Clikits pieces would ever be determined.
|
|
Author: | axaday | Posted: | Apr 11, 2019 19:28 | Subject: | Re: Inventory Change Request for Set 7533-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
|
|
|
Author: | axaday | Posted: | Apr 11, 2019 19:26 | Subject: | Inventory Change Request for Set 7533-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|