Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | axaday | Posted: | Apr 18, 2019 11:40 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
This is very likely something so massive that we don't even want to think
about it...but a possible solution to the minifig definition problem on the road
map is to create plain and deluxe minifigs. For any minifig wearing something
on its neck, hands, or feet there could be two entries: Plain with only strictly
minifig pars and one with everything that the instructions or box shows. If
we did that then this set could have the Deluxe Ursula and an extra amulet and
then a plain Ursula and a spued amulet as an alternate. It would give those
silly dressed up Belville dolls some actual legitimacy and would make room in
the catalog for the absolutely stunning Firefly seen on the box for 76117. If
you haven't seen that guy blasting off with his jetpack and firing a killshot
from his hand cannon go see it right now.
|
A lot of people like to sell Thor with a hammer or axe, Batman with a Batarang
and such. And all those minifigs with neck brackets attached to nothing but
their necks make sense only as a technicality to our rules. Practically any
customer would rather buy it either without the neck bracket or with whatever
was supposed to connect to it.
|
|
Author: | randyf | Posted: | Apr 18, 2019 11:37 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
Does it meet the definition of anything else? It is all alone out in a cold,
cruel world.
|
Yes, it does. It meets the definition of a Regular Item. However, it follows
a stipulation from that same help page above:
"Parts on Sprues - Complete sprues are included in this section unless
some parts from the sprue are used in minifigures. In that case, the parts from
the sprue that are not used in minifigures are included in this section."
This is how these parts are handled in the inventories. Until a later time when
minifigs are just considered another possible assembly from a set and all of
their parts are included separately in the Regular Items section, these parts
follow the above guideline.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Apr 18, 2019 11:37 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
This is very likely something so massive that we don't even want to think
about it...but a possible solution to the minifig definition problem on the road
map is to create plain and deluxe minifigs. For any minifig wearing something
on its neck, hands, or feet there could be two entries: Plain with only strictly
minifig pars and one with everything that the instructions or box shows. If
we did that then this set could have the Deluxe Ursula and an extra amulet and
then a plain Ursula and a spued amulet as an alternate. It would give those
silly dressed up Belville dolls some actual legitimacy and would make room in
the catalog for the absolutely stunning Firefly seen on the box for 76117. If
you haven't seen that guy blasting off with his jetpack and firing a killshot
from his hand cannon go see it right now.
|
|
Author: | axaday | Posted: | Apr 18, 2019 11:32 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
Does it meet the definition of anything else? It is all alone out in a cold,
cruel world.
|
|
Author: | randyf | Posted: | Apr 18, 2019 11:25 | Subject: | Re: Inventory Change Request for Set 41145-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
No, this does not meet the definition of a Counterpart:
https://www.bricklink.com/help.asp?helpID=1562
This request will not be accepted.
Randy
|
|
Author: | axaday | Posted: | Apr 18, 2019 10:14 | Subject: | Inventory Change Request for Set 41145-1 | Viewed: | 61 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 28628c01pb03 Pearl Dark Gray Mini Doll, Necklace Amulet with Yellow Stone Pattern, 2 on Sprue (Counterpart)
Comments from Submitter:
I just realized that this part was still orphaned. Awkward since it is in a minifig, but it can be a counterpart, right?
|
|
Author: | Turez | Posted: | Apr 18, 2019 04:48 | Subject: | Inventory Change Request for Set 10258-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30292pb036L Dark Blue Flag 7 x 3 with Rod with 'EXPLORE LONDON' / Brick-Built Biscuits Pattern Model Left Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb036R Dark Blue Flag 7 x 3 with Rod with 'EXPLORE LONDON' / Brick-Built Biscuits Pattern Model Right Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb035L Dark Blue Flag 7 x 3 with Rod with 'High Tea Requires' / Partial United Kingdom Flag (Union Jack) Pattern Model Left Front Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb035R Dark Blue Flag 7 x 3 with Rod with 'High Tea Requires' / Partial United Kingdom Flag (Union Jack) Pattern Model Right Back Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb037L Dark Blue Flag 7 x 3 with Rod with 'Quality Biscuits' / Partial United Kingdom Flag (Union Jack) Pattern Model Left Back Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 30292pb037R Dark Blue Flag 7 x 3 with Rod with 'Quality Biscuits' / Partial United Kingdom Flag (Union Jack) Pattern Model Right Front Side (Stickers) - Set 10258 (Counterpart)
* Add 1 Part 4346pb38 Black Container, Box 2 x 2 x 2 Door with Slot and 'USED TICKETS' Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 60601pb019 Trans-Black Glass for Window 1 x 2 x 2 with White '9' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 60602pb10 Trans-Black Glass for Window 1 x 2 x 3 with '9', 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 60602pb11 Trans-Black Glass for Window 1 x 2 x 3 with 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 85984pb211 Red Slope 30 1 x 2 x 2/3 with 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' on White Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 85984pb212 Red Slope 30 1 x 2 x 2/3 with White '9' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 2 Part 15068pb168 Tan Slope, Curved 2 x 2 No Studs with Two Black Hash Marks Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 2431pb571 Black Tile 1 x 4 with White 'MGW 10258' License Plate on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 2 Part 6636pb191 Black Tile 1 x 6 with 'BRICKSTON' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 26603pb039 Black Tile 2 x 3 with 'Yellow Brick Road', 'Brickadilly Circus' and 'Twobytwo Square' on Black Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 26603pb038 Yellow Tile 2 x 3 with Black 'MGW 10258' License Plate on Yellow Background Pattern (Sticker) - Set 10258 (Counterpart)
* Add 1 Part 24607pb02 Trans-Clear Windscreen 2 x 10 x 3 with Red Vertical Stripe Pattern (Sticker) - Set 10258 (Counterpart)
|
|
Author: | Turez | Posted: | Apr 18, 2019 04:33 | Subject: | Inventory Change Request for Set 60159-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 14719pb001L Bright Light Orange Tile 2 x 2 Corner with Silver Tread Plate Pattern Model Left Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 14719pb001R Bright Light Orange Tile 2 x 2 Corner with Silver Tread Plate Pattern Model Right Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3622pb108L Bright Light Orange Brick 1 x 3 with Door Handle and Black Stripe Pattern Model Left Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3622pb108R Bright Light Orange Brick 1 x 3 with Door Handle and Black Stripe Pattern Model Right Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3009pb216L Bright Light Orange Brick 1 x 6 with Black '60159', Panther Head and Black Stripe Pattern Model Left Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3009pb216R Bright Light Orange Brick 1 x 6 with Black '60159', Panther Head and Black Stripe Pattern Model Right Side (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 13269pb005 Bright Light Orange Slope 45 6 x 4 Double / 33 (Train Roof) with Leopard Head, Leaves and Grille Pattern (Sticker) - Set 60159 (Counterpart)
* Add 2 Part 2431pb570 Bright Light Orange Tile 1 x 4 with Silver Tread Plate Pattern (Sticker) - Set 60159 (Counterpart)
* Add 1 Part 3069bpb710 Black Tile 1 x 2 with Bright Light Orange '60159' on Black Background Pattern (Sticker) - Set 60159 (Counterpart)
|
|
Author: | dmaster.hu | Posted: | Apr 18, 2019 04:00 | Subject: | Inventory Change Request for Set 70650-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 64567 Black Minifigure, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 21459 Black Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 20482 Black Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Add 1 Part 15392 Dark Bluish Gray Minifigure, Weapon Trigger for Gun, Mini Blaster / Shooter (Extra)
* Add 1 Part 54200 Dark Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
|
|
Author: | randyf | Posted: | Apr 17, 2019 14:36 | Subject: | Re: Inventory Change Request for Book 9781591747697 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, guardiangames writes:
| Please make changes to the following inventory:
* Add 2 Part x89 Black Rubber Belt Large (Round Cross Section) - Approx. 4 x 4 (Alternate) (match ID 6)
Comments from Submitter:
These thick round rubberbands are in my sealed set as an alternative to the black technic wedge belt tire.
|
I am sorry that it has taken me a bit to get back to you concerning this request,
but thank you for bringing this to my attention.
I have been doing a lot of research about this book, and I have found that there
are a couple of large errors in the inventory which should never have been accepted.
I have reviewed at least 40-50 of these books as a sealed set over the last few
days, and I will be taking a little time to first correct the original inventory
before making any other changes.
Judging from many of these books that I have reviewed, the black belts do not
seem to be either part x89 in your request or part 2815 that was added to the
inventory in August 2017:
https://www.bricklink.com/messageThread.asp?ID=224516
What gives me confidence in this conclusion is also a prior thread attached to
a prior change request for this book:
https://www.bricklink.com/messageThread.asp?ID=176325
Thanks for your patience as I try to figure all of this out. I may have to purchase
a couple of the copies I was looking at to get the complete picture.
Cheers,
Randy
|
Okay, I purchased two of these books, one with the black large wheels and one
with the light bluish gray large wheels. The books have different back covers
and some different pages inside. Therefore, I believe these two books are from
different print runs of the book over a period of years. In both of them, the
black rubber belts are the same. It is quite obvious at first glance that these
belts are neither part x89 or any other belt currently in the catalog. I have
never seen one like it. I will get this new belt added to the catalog and then
correct the inventory. After that, this request will be rejected since it is
not correct.
Cheers,
Randy
|
The new rubber belt has been added to the catalog as
[p=bb890]
and has been added to the inventory of
This request is now complete and will be closed.
Cheers,
Randy
|
|
Author: | Turez | Posted: | Apr 17, 2019 07:01 | Subject: | Inventory Change Request for Set 75953-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87421pb045 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 1 Outside and Portrait of Wizard Type 1 Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb046 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 2 Outside and Gryffindor Banner Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb047 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 1 Outside and Portrait of Men with Dog Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb048 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 2 Outside and Portrait of Woman and Dog Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb049 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 1 Outside and Portrait of Wizard Type 2 Inside Pattern (Stickers) - Set 75953 (Counterpart)
* Add 1 Part 87421pb050 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Type 2 Outside and Portrait of Puppet Player Inside Pattern (Stickers) - Set 75953 (Counterpart)
|
|
Author: | elias3 | Posted: | Apr 17, 2019 05:43 | Subject: | Inventory Change Request for Set 60128-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
Author: | Maximilien | Posted: | Apr 17, 2019 04:55 | Subject: | Re: Inventory Change Request for Set 7146-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| Thanks again.
I'm definitively blind.
|
Author: | Hygrotus | Posted: | Apr 17, 2019 02:48 | Subject: | Inventory Change Request for Set 75953-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 6259pb037 Reddish Brown Cylinder Half 2 x 4 x 4 with Tree Bark Lines Pattern 1 (Sticker) - Set 75953 (Counterpart)
* Add 1 Part 6259pb038 Reddish Brown Cylinder Half 2 x 4 x 4 with Tree Bark Lines Pattern 2 (Sticker) - Set 75953 (Counterpart)
|
|
Author: | randyipp | Posted: | Apr 16, 2019 18:04 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
Before approving this I would like confirmation that the print really is dark
brown. In the other discussion topic I only saw people saying that the print
on their parts is not reddish brown. But printed colors can sometimes look a
bit different because of the background color on which it is printed. So please
compare the print on your parts with both reddish brown and dark brown parts
to make sure that this request is correct.
|
Thanks for taking the lead on this, Paul. I have been reviewing some YouTube
set reviews. It is hard to tell colors from many of them, but I think I have
seen both versions. If the OP is correct (and there is no reason to doubt otherwise),
I would like to have confirmation from someone who has a Reddish Brown version
in the set before we add an alternate instead of do an outright change.
Cheers,
Randy
|
I have a Batcave set but it is sealed still so I don't want to open it yet
to add that to the comparison, but I have the town hall. Town hall globe is
the reddish brown on right and the one from the ship in a bottle on left, with
a dark brown tile.
|
|
|
Author: | randyf | Posted: | Apr 16, 2019 17:33 | Subject: | Re: Inventory Change Request for Set 7146-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, Maximilien writes:
| Please make changes to the following inventory:
* Delete 43 Part 2412b Blue Tile, Modified 1 x 2 Grille with Bottom Groove / Lip
Comments from Submitter:
I only have 42 blue parts 2412b in my set and I only see 42 of them on the instructions. 18 on each wings, 3 around the Dark Gray Support, 2 under the Dark Gray Dish 4 x 4 Inverted and 1 in the back. Where is the 43th ?
|
The 43rd is on Step 3 of Page 2 (the floor of the cockpit).
Since the inventory is correct concerning this part, this request will not be
accepted.
Cheers,
Randy
|
|
Author: | Maximilien | Posted: | Apr 16, 2019 16:45 | Subject: | Inventory Change Request for Set 7146-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 43 Part 2412b Blue Tile, Modified 1 x 2 Grille with Bottom Groove / Lip
Comments from Submitter:
I only have 42 blue parts 2412b in my set and I only see 42 of them on the instructions. 18 on each wings, 3 around the Dark Gray Support, 2 under the Dark Gray Dish 4 x 4 Inverted and 1 in the back. Where is the 43th ?
|
|
Author: | normann1974 | Posted: | Apr 16, 2019 14:27 | Subject: | Inventory Change Request for Set 42078-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3070b Trans-Clear Tile 1 x 1 with Groove (3070) (Extra)
* Add 2 Part 3070b Trans-Clear Tile 1 x 1 with Groove (3070) (Extra)
Comments from Submitter:
I just parted out this set and found 5 tiles. Delete/add instead of change because form is still broken. One wonders if this will ever be fixed.
|
|
Author: | randyf | Posted: | Apr 16, 2019 12:33 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
Before approving this I would like confirmation that the print really is dark
brown. In the other discussion topic I only saw people saying that the print
on their parts is not reddish brown. But printed colors can sometimes look a
bit different because of the background color on which it is printed. So please
compare the print on your parts with both reddish brown and dark brown parts
to make sure that this request is correct.
|
Thanks for taking the lead on this, Paul. I have been reviewing some YouTube
set reviews. It is hard to tell colors from many of them, but I think I have
seen both versions. If the OP is correct (and there is no reason to doubt otherwise),
I would like to have confirmation from someone who has a Reddish Brown version
in the set before we add an alternate instead of do an outright change.
Cheers,
Randy
|
|
Author: | elias3 | Posted: | Apr 16, 2019 10:38 | Subject: | Inventory Change Request for Set 60054-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate) {match ID 1 to 2}
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | paulvdb | Posted: | Apr 16, 2019 06:55 | Subject: | Re: Inventory Change Request for Set 21313-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyipp writes:
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
Before approving this I would like confirmation that the print really is dark
brown. In the other discussion topic I only saw people saying that the print
on their parts is not reddish brown. But printed colors can sometimes look a
bit different because of the background color on which it is printed. So please
compare the print on your parts with both reddish brown and dark brown parts
to make sure that this request is correct.
|
|
Author: | elias3 | Posted: | Apr 16, 2019 05:14 | Subject: | Inventory Change Request for Set 4434-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | randyipp | Posted: | Apr 15, 2019 16:53 | Subject: | Inventory Change Request for Set 21313-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 61287pb006 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with Europe, Africa, Asia, Australia Dark Brown Globe Pattern (Alternate) (match ID 819737)
* Add 2 Part 61287pb005 Dark Tan Cylinder Hemisphere 2 x 2 with Cutout with the Americas and South Pacific Dark Brown Globe Pattern (Alternate) (match ID 819736 )
Comments from Submitter:
From 7x sealed sets.
|
|
Author: | Brixalotl | Posted: | Apr 15, 2019 13:48 | Subject: | Inventory Change Request for Set 70403-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 10 Part 15571 Red Slope 45 2 x 1 Triple with Bottom Stud Holder (Alternate) (match ID 3)
Comments from Submitter:
found both variants during part out, thanks
|
|
Author: | Gargan | Posted: | Apr 14, 2019 13:21 | Subject: | Inventory Change Request for Set 75185-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 30377 Black Arm Mechanical, Battle Droid (Extra)
* Add 1 Part 64567 Black Minifigure, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 30170 Dark Bluish Gray Minifigure, Visor Goggles (Extra)
* Add 1 Part 61482 Light Bluish Gray Minifigure, Utensil Handcuffs (Extra)
* Add 1 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 64567 Metallic Silver Minifigure, Weapon Lightsaber Hilt Straight (Extra)
* Add 2 Part 98138 Trans-Red Tile, Round 1 x 1 (Extra)
* Add 1 Part 60849 Black Minifigure, Utensil Hose Nozzle Elaborate (Extra)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
Source: Sealed Set
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:57 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| Checked again, one additional missile there, 8 regular used for building.
In Inventories Requests, 1977_mauro writes:
| OK, I will recheck, if I have forgotten to add the missile somewhere in the set...
In Inventories Requests, SylvainLS writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:45 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| OK, I will recheck, if I have forgotten to add the missile somewhere in the set...
In Inventories Requests, SylvainLS writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
|
Author: | SylvainLS | Posted: | Apr 14, 2019 12:35 | Subject: | Re: Inventory Change Request for Set 70620-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
It’s not a mistake, I also got 9 (5+4) 87994 and 8 (8+0) 61184.
Extras are just that, extras, you are not assured to get them, and they can change
with production runs.
So, to be clear, your extra 61184 can be added but the 87994 you didn’t get should
stay.
|
|
Author: | 1977_mauro | Posted: | Apr 14, 2019 12:19 | Subject: | Inventory Change Request for Set 70620-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61184 Light Bluish Gray Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) (Extra)
Comments from Submitter:
I assume, someone has inventorized 4 x 87994 additional light bluish bars (1 to much by mistake) instead of adding one additional light bluish flick missile. Both are looking similar to each other.
(I think that the 4 bars should be reduced to 3 as well)
|
|
Author: | randyf | Posted: | Apr 12, 2019 19:10 | Subject: | Re: Inventory Change Request for Set 163-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, aefferen writes:
| Please make changes to the following inventory:
* Add 1 Part 3020 Blue Plate 2 x 4
Comments from Submitter:
Inventory says 2 pieces of blue plate 2x4. In the instruction 3 are used.
|
Great catch!
There are indeed three used to build the crane-car model (model C). One is used
in Step 1, one is used in Step 5, and one is used in Step 7. They are highlighted
in the finished build below.
Thanks for contributing to the accuracy of the BrickLink inventories.
Cheers,
Randy
|
|
|
Author: | FreeStorm | Posted: | Apr 12, 2019 16:01 | Subject: | Re: Inventory Change Request for Set 163-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, aefferen writes:
| Please make changes to the following inventory:
* Add 1 Part 3020 Blue Plate 2 x 4
Comments from Submitter:
Inventory says 2 pieces of blue plate 2x4. In the instruction 3 are used.
|
I would say 2 parts is right.
You can build 3 different models with this set.
For model A
2 on step 1
For model B
0
For model c
1 on step 1
1 on step 7
-Fred
|
Author: | aefferen | Posted: | Apr 12, 2019 15:08 | Subject: | Inventory Change Request for Set 163-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3020 Blue Plate 2 x 4
Comments from Submitter:
Inventory says 2 pieces of blue plate 2x4. In the instruction 3 are used.
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:41 | Subject: | Inventory Change Request for Set 8041-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87086pb043 Black Technic, Panel Fairing # 2 Small Smooth Short, Side B with LEGO Logo, 'SMOOTH OIL' and 'V8' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:41 | Subject: | Inventory Change Request for Set 8041-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87080pb043 Black Technic, Panel Fairing # 1 Small Smooth Short, Side A with 'light@night' and '52' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:40 | Subject: | Inventory Change Request for Set 42041-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87086pb043 Black Technic, Panel Fairing # 2 Small Smooth Short, Side B with LEGO Logo, 'SMOOTH OIL' and 'V8' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
Author: | A.Lukinov | Posted: | Apr 12, 2019 11:39 | Subject: | Inventory Change Request for Set 42041-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87080pb043 Black Technic, Panel Fairing # 1 Small Smooth Short, Side A with 'light@night' and '52' Pattern (Sticker) - Sets 8041, 42041 (Counterpart)
|
|
Author: | paulvdb | Posted: | Apr 12, 2019 03:50 | Subject: | Re: Inventory Change Request for Set 183-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right (Counterpart)
* Delete 1 Part bb72 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
* Add 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right
|
You forgot to also delete the string from the inventory. I did that for you.
That leaves only one set with part bb72c01 as counterpart. It is a bit before
my time, so I don't know if it would also have come assembled in that set.
Maybe I'll like into that when I have some free time, but not sure when that
will be.
|
|
Author: | paulvdb | Posted: | Apr 12, 2019 03:33 | Subject: | Re: Inventory Change Request for Set 4201-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, laulainendebra writes:
| Please make changes to the following inventory:
* Add 1 Part 3069b White Tile 1 x 2 with Groove (Counterpart)
Comments from Submitter:
Sticker with black letter "JL 4201" on white 1x2 tile. It shows that it is part of the sticker group but not listed as a counterpart.
|
As Stefaan mentioned, this sticker does not go on a 1x2 tile. The sticker goes
on a 2x10 brick and is already in the inventory as a counterpart.
|
|
Author: | SezaR | Posted: | Apr 12, 2019 03:23 | Subject: | Re: Inventory Change Request for Set 183-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right (Counterpart)
* Delete 1 Part bb72 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
* Add 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right
|
The hook came assembled in my photos of three sealed copies of this set(photos
1,2,6). In one photo, we cannot clearly see the hook but it is certainly there.
In all my photos, sealed copy or used copy, the hook is the right version.
|
|
|
Author: | elias3 | Posted: | Apr 12, 2019 03:12 | Subject: | Re: Inventory Change Request for Set 4201-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
Hi
And also... both stickers are already in the catalog as counterpart.
the OP has a sticker on a wrong part
Stefaan
|
|
Author: | joesecc | Posted: | Apr 12, 2019 03:04 | Subject: | Inventory Change Request for Set 7713-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 47759pb13 Black Wedge 2 x 4 Triple with Yellow and Black Stripes Pattern (Sticker) - Set 7713 (Counterpart)
Comments from Submitter:
part 47759 with sticker applied.
|
|
Author: | SezaR | Posted: | Apr 12, 2019 03:01 | Subject: | Inventory Change Request for Set 183-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right (Counterpart)
* Delete 1 Part bb72 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
* Add 1 Part bb72c01 Red String Reel Winch 4 x 4 x 2 with Sloped Top, Metal Handle, Black Drum and Crane Arm Complete with String and Crane Hook Right
|
|
Author: | randyf | Posted: | Apr 12, 2019 02:59 | Subject: | Re: Inventory Change Request for Set 3669-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Add 1 Part 4000 Yellow Ladder 16 x 4 with Semi-Circular Pivot
* Add 1 Part 5 Red Fabuland Fire Ladder Holder 2 x 4 x 2 1/2
* Add 1 Part fabal6 Yellow Fabuland Fire Ladder (Counterpart)
* Delete 1 Part fabal6 Yellow Fabuland Fire Ladder
Comments from Submitter:
The ladder and ladder holder came as separate parts in a sealed set. Image to follow.
|
|
|
|
Author: | randyf | Posted: | Apr 12, 2019 02:58 | Subject: | Inventory Change Request for Set 3669-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4000 Yellow Ladder 16 x 4 with Semi-Circular Pivot
* Add 1 Part 5 Red Fabuland Fire Ladder Holder 2 x 4 x 2 1/2
* Add 1 Part fabal6 Yellow Fabuland Fire Ladder (Counterpart)
* Delete 1 Part fabal6 Yellow Fabuland Fire Ladder
Comments from Submitter:
The ladder and ladder holder came as separate parts in a sealed set. Image to follow.
|
|
Author: | laulainendebra | Posted: | Apr 11, 2019 23:58 | Subject: | Inventory Change Request for Set 4201-1 | Viewed: | 42 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069b White Tile 1 x 2 with Groove (Counterpart)
Comments from Submitter:
Sticker with black letter "JL 4201" on white 1x2 tile. It shows that it is part of the sticker group but not listed as a counterpart.
|
|
Author: | axaday | Posted: | Apr 11, 2019 23:19 | Subject: | Re: Inventory Change Request for Set 7533-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
You don't know how many sleepless nights I have been through wondering when
these Clikits pieces would ever be determined.
|
I have some idea. That's why I got right on it.
This one is a win-win-win-win. Catalog gets a weight and 4 undetermined pieces,
I get a little profit, and I have a cornered market. My daughter and I will
build the jewelry and it'll come out of her toy budget!
|
|
Author: | Give.Me.A.Brick | Posted: | Apr 11, 2019 20:28 | Subject: | Re: Inventory Change Request for Set 3315-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Give.Me.A.Brick writes:
| Please make changes to the following inventory:
* Delete 1 Part 60474 Medium Blue Plate, Round 4 x 4 with Hole (Alternate) (match ID 9)
Comments from Submitter:
Different runs of this set come with different shades of Bright Light Blue, but no run that I've came across with came with Medium Blue color for this Plate.
|
I agree with you. I have seen different shades of Bright Light Blue, but I have
never seen this part in Medium Blue.
Cheers,
Randy
|
Thank you Randy.
|
|
Author: | randyf | Posted: | Apr 11, 2019 20:07 | Subject: | Re: Inventory Change Request for Set 7533-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
You don't know how many sleepless nights I have been through wondering when
these Clikits pieces would ever be determined.
|
|
Author: | axaday | Posted: | Apr 11, 2019 19:28 | Subject: | Re: Inventory Change Request for Set 7533-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
|
|
|
Author: | axaday | Posted: | Apr 11, 2019 19:26 | Subject: | Inventory Change Request for Set 7533-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 8 Part Trans-Very Lt Blue {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 1 Part Trans-Pink {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
* Change 2 Part Trans-Pink {clikits027u Clikits Icon, Heart 2 x 2 Small with Pin - (Undetermined Version) to clikits027b Clikits Icon, Heart 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
* Change 8 Part Trans-Green {clikits038u Clikits Icon, Round 2 x 2 Small with Hole - (Undetermined Version) to clikits038b Clikits Icon, Round 2 x 2 Small with Hole, Polished (Transparent Colors Only)}
Comments from Submitter:
The long night is over! Everybody has been wondering about this Clikits set, but now we know. Pic following.
|
|
Author: | randyf | Posted: | Apr 11, 2019 18:26 | Subject: | Re: Inventory Change Request for Set 3315-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, Give.Me.A.Brick writes:
| Please make changes to the following inventory:
* Delete 1 Part 60474 Medium Blue Plate, Round 4 x 4 with Hole (Alternate) (match ID 9)
Comments from Submitter:
Different runs of this set come with different shades of Bright Light Blue, but no run that I've came across with came with Medium Blue color for this Plate.
|
I agree with you. I have seen different shades of Bright Light Blue, but I have
never seen this part in Medium Blue.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 11, 2019 18:13 | Subject: | Re: Inventory Change Request for Set 710-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, toontexas writes:
| In Inventories Requests, randyf writes:
| Did the three parts that make up
[p=bb72c01]
come separately in the sealed set, or were they all preassembled? The instructions
are inconclusive about this.
|
I found bb72c01 exactly as it is in the picture. The string is tied to the winch,
and the hook is tied to the other end of the string. The string is also neatly
rolled up on the winch.
Unrolling the winch will extend the string. I can create about 32.5cm between
the hook and the winch roll. Add a little bit for knots and spanning the winch
roll and my conclusion is that the string is 35cm long.
|
Thank you for the information. Your requests have been accepted.
For now, I am not going to change the inventory of the preassembled part to include
a certain length of string, since we do not know if the length was always ~35cm
for this part. This thread will be saved indefinitely, though, so we can come
back to this information if we need it later.
One further question. Does your bb72c01 have a "right" crane hook on it like
the inventory shows, or does it have a "left" crane hook?
Cheers,
Randy
|
|
Author: | Give.Me.A.Brick | Posted: | Apr 11, 2019 15:12 | Subject: | Inventory Change Request for Set 3315-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 60474 Medium Blue Plate, Round 4 x 4 with Hole (Alternate) (match ID 9)
Comments from Submitter:
Different runs of this set come with different shades of Bright Light Blue, but no run that I've came across with came with Medium Blue color for this Plate.
|
|
Author: | toontexas | Posted: | Apr 11, 2019 07:39 | Subject: | Re: Inventory Change Request for Set 710-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Did the three parts that make up
[p=bb72c01]
come separately in the sealed set, or were they all preassembled? The instructions
are inconclusive about this.
|
I found bb72c01 exactly as it is in the picture. The string is tied to the winch,
and the hook is tied to the other end of the string. The string is also neatly
rolled up on the winch.
Unrolling the winch will extend the string. I can create about 32.5cm between
the hook and the winch roll. Add a little bit for knots and spanning the winch
roll and my conclusion is that the string is 35cm long.
|
Author: | Maximilien | Posted: | Apr 11, 2019 02:40 | Subject: | Re: Inventory Change Request for Set 4712-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
OK, thanks again !
|
|
Author: | normann1974 | Posted: | Apr 10, 2019 19:31 | Subject: | Inventory Change Request for Set 75156-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 4085d Red Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) (Alternate) (match ID 2)
* Change 1 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 4 Part Red {4085d Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) to 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip)} {match ID 0 to 2}
Comments from Submitter:
Found these variants during part-out.
|
|
Author: | normann1974 | Posted: | Apr 10, 2019 19:26 | Subject: | Inventory Change Request for Set 2824-21 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Just parted out this set and found ungrooved variant.
|
|
Author: | normann1974 | Posted: | Apr 10, 2019 19:25 | Subject: | Inventory Change Request for Set 2824-18 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Just parted out this set and found non-grooved version.
|
Author: | cuddlyogre | Posted: | Apr 10, 2019 16:37 | Subject: | Inventory Change Request for Set 9499-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 2456pb021 Blue Brick 2 x 6 with SW Gungan Sub Controls Pattern (Sticker) - Set 9499
|
|
Author: | randyf | Posted: | Apr 10, 2019 16:33 | Subject: | Re: Inventory Change Request for Set 75147-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
Comments from Submitter:
I just parted out this set and found non-grooved variant. Important: Please change the amount of trans-light blue round 1x1 tiles to 3. I found 20 in total, but form is broken, so I can't change number of extras.
|
Hey Jan!
The extras were updated. Thanks for letting me know.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 10, 2019 16:14 | Subject: | Re: Inventory Change Request for Set 710-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, toontexas writes:
| In Inventories Requests, toontexas writes:
| Please make changes to the following inventory:
* Delete 1 Part x77 Black String, Cord (Undetermined Type)
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
Comments from Submitter:
I just unboxed a sealed set. There is only one string and only one hook in this set, and they are both in part number bb72c01.
|
[part=bb72c01]
Part number bb72c01 consists of three parts: the winch with arm, the hook and
the string. The string is a x77a string (thin) with a length of 35cm, which would
make it part x77ac35, however this part doesn't exist (yet). I think it would
be a fair assumption that all parts bb72c01 came with a 35cm string (but I could
be wrong).
|
Before I can proceed with these requests, I need some more information if you
do not mind.
Did the three parts that make up
[p=bb72c01]
come separately in the sealed set, or were they all preassembled? The instructions
are inconclusive about this.
It's hard to come by data for sealed sets from this period of time, so we
have a good learning opportunity here.
Thanks,
Randy
|
|
Author: | normann1974 | Posted: | Apr 10, 2019 16:13 | Subject: | Inventory Change Request for Set 75147-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
Comments from Submitter:
I just parted out this set and found non-grooved variant. Important: Please change the amount of trans-light blue round 1x1 tiles to 3. I found 20 in total, but form is broken, so I can't change number of extras.
|
|
|
Author: | Maximilien | Posted: | Apr 10, 2019 15:30 | Subject: | Re: Inventory Change Request for Set 4712-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| You must be right.
I'll ask my sons about this mystery. Maybe they exchanged this part with
a friend...
Perhaps you can help me again : I also have this part (3626bpb0011) in yellow,
not orange.
I don't find it on Bricklink. From which set this one is coming ? Thanks.
|
|
Author: | randyf | Posted: | Apr 10, 2019 14:04 | Subject: | Re: Inventory Change Request for Set 4712-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, Maximilien writes:
| | There is absolutely no way that a part from 2009 could travel back in time to
2002 to be in a set that it could never have been in.
|
Thanks, Randy, for your funny answer.
But we still have a problem as time traveling is not an option.
My son received this set in march 2003 and we never had any other set with any
sort of pumpkin head.
So, how can you explain the presence of this alternate part in our set ?
Beside, having other people with the same part switch is strange, isn't it
?
Maybe Lego changed the pattern of this part in later production and then re-used
it in a different set in 2009...
|
No offense meant, but I really don't think so. The part was added to BrickLink
in 2009. I find it very difficult to believe that no one in that seven year span
after the Harry Potter set was released found one in one of those sets and added
it to BrickLink before the LEGO game in 2009. Also, dual-sided, printed heads
were a *very* new thing around the 2002 time period, so it is far less likely
that they would have used a dual-sided head for the pumpkin at that time.
Having said all of that, I still tried to hunt down some more evidence. I have
literally searched hundreds of old listings from auction sites, and I did not
see one example where the pumpkin head was the one you are trying to add to the
set. I also found quite a few auctions showing sealed bags from the set, and
all of them have the pumpkin head that is included in the instructions and artwork
for the set.
What I do find much more probable is that used sets these days that are being
sold are using the newer head to finish them since the older head is not as easily
available.
I am sorry, but for a change of this magnitude, I would need to see one right
from a sealed set to believe it with my own eyes. The evidence against it being
probable are too high.
Cheers,
Randy
|
|
Author: | normann1974 | Posted: | Apr 10, 2019 13:34 | Subject: | Inventory Change Request for Set 60167-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Dark Bluish Gray {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
Comments from Submitter:
Found non-grooved variants during part-out.
|
|
Author: | paulvdb | Posted: | Apr 10, 2019 11:56 | Subject: | Re: Inventory Change Request for Set 70327-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, good_old_bricks writes:
| Please make changes to the following inventory:
* Add 1 Part 3069bpb686 Light Bluish Gray Tile 1 x 2 with Black Lines and 3 Yellow and Orange Dots Pattern (Sticker) - Set 70327
|
There should be two of these in the set and they should be added as counterparts,
not regular items. I have accepted this request and made those changes.
|
|
Author: | Maximilien | Posted: | Apr 10, 2019 10:25 | Subject: | Re: Inventory Change Request for Set 4712-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| | There is absolutely no way that a part from 2009 could travel back in time to
2002 to be in a set that it could never have been in.
|
Thanks, Randy, for your funny answer.
But we still have a problem as time traveling is not an option.
My son received this set in march 2003 and we never had any other set with any
sort of pumpkin head.
So, how can you explain the presence of this alternate part in our set ?
Beside, having other people with the same part switch is strange, isn't it
?
Maybe Lego changed the pattern of this part in later production and then re-used
it in a different set in 2009...
|
|
Author: | toontexas | Posted: | Apr 10, 2019 08:50 | Subject: | Re: Inventory Change Request for Set 710-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, toontexas writes:
| Please make changes to the following inventory:
* Delete 1 Part x77 Black String, Cord (Undetermined Type)
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
Comments from Submitter:
I just unboxed a sealed set. There is only one string and only one hook in this set, and they are both in part number bb72c01.
|
[part=bb72c01]
Part number bb72c01 consists of three parts: the winch with arm, the hook and
the string. The string is a x77a string (thin) with a length of 35cm, which would
make it part x77ac35, however this part doesn't exist (yet). I think it would
be a fair assumption that all parts bb72c01 came with a 35cm string (but I could
be wrong).
|
|
Author: | toontexas | Posted: | Apr 10, 2019 08:41 | Subject: | Inventory Change Request for Set 710-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part x77 Black String, Cord (Undetermined Type)
* Delete 1 Part 3127 Red Hook, Plate, Modified 1 x 2 with Crane Hook Left
Comments from Submitter:
I just unboxed a sealed set. There is only one string and only one hook in this set, and they are both in part number bb72c01.
|
|
Author: | createat8 | Posted: | Apr 10, 2019 07:59 | Subject: | Re: Inventory Change Request for Set 8733-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, wozke writes:
| Please make changes to the following inventory:
* Add 1 Part 43558 Flat Silver Bionicle Chest Armor, Toa Nuva (Alternate) (match ID 6)
* Add 4 Part 50919 Flat Silver Bionicle Foot Toa Hordika (Alternate) (match ID 7)
* Add 2 Part x345 Flat Silver Bionicle Shoulder Armor (Alternate) (match ID 8)
* Add 4 Part 47299 Flat Silver Bionicle Toa Metru Knee Cover (Alternate) (match ID 9)
* Add 2 Part 44816 Flat Silver Bionicle Weapon Rahkshi Staff of Shattering (Panrahk) (Alternate) (match ID 10)
Comments from Submitter:
Based on a sealed set inventory, see my photo's on: https://www.flickr.com/photos/163079900@N02/albums/72157707712666825.
|
Nice photos. Thanks a lot for those!
Yep. That was the prior research I had done.
| I've manage to find a sealed 8733 set, with a hole in the box. I was able to get all bags out of the box, still sealed. The parts mentioned in this change request all have the flat silver color in my set, apart from the 50919 foot piece, which has 2 flat silver and 2 pearl light gray.
However, looking at the post in the previous change, I think it's likely that there are different versions of color variations, sometimes completely pearl light gray or flat silver, sometimes a mix (as in my set).
I tried to get pictures with both the pearl light gray and flat silver color in it, but in real life the color difference is more clear.
I chose to keep the current inventory as is, and to list my parts as alternates. It might be an idea to have the set listed with on color only, and the other color as alternate parts, but I leave that to the admins to decide.
|
I made all of your colors the primary ones in the Regular Items section since
you have first-hand visual evidence and the photos you provided verify this.
| NB. I could not get the existing parts to change the match ID in one go, I keep getting the "Oops! There was a problem processing your request:
Entry #6: New Item Type & Item No is same as Existing Item Type & Item No." error. Leaving the item no empty is not an option, so not sure how to do this.
|
There is an error in the form that is currently preventing this. I am sorry about
that, but us admins are waiting for the fix, too. I have manually updated everything
though to get the inventory straightened out. Take a look at it and see if everything
looks OK now.
Cheers,
Randy
|
Thanks Randy, much appreciated!
|
|
Author: | good_old_bricks | Posted: | Apr 10, 2019 07:35 | Subject: | Inventory Change Request for Set 70327-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb686 Light Bluish Gray Tile 1 x 2 with Black Lines and 3 Yellow and Orange Dots Pattern (Sticker) - Set 70327
|
|
Author: | good_old_bricks | Posted: | Apr 10, 2019 06:56 | Subject: | Inventory Change Request for Set 60159-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069b Black Tile 1 x 2 with Groove (Counterpart)
Comments from Submitter:
Tile 1 x 2 with yellow writing 60159 ( Sticker )
It's my first adding, pls excuse me.
|
|
Author: | bb53904 | Posted: | Apr 10, 2019 04:17 | Subject: | Re: Inventory Change Request for Set 7904-25 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Maximilien writes:
| Please make changes to the following inventory:
* Add 2 Part 3004 Red Brick 1 x 2
* Delete 5 Part 3004 Red Brick 1 x 2
Comments from Submitter:
7 red 1x2 bricks are actually used in that set, not extra. 6 for the chimney (1 at rear for level 1 - 2 on each sides for level 2 - 2 on each sides and 1 at rear for level 3 - with an arch at front) and 1 as a gift pack in the brown box.
|
Nice catch!
Yep, I tried building it in LDD without the other two red bricks and it leaves
two holes in the back of the chimney unfilled. I have a feeling they were supposed
to be filled.
Cheers,
Randy
|
Thanks for verifying the model Randy. I've changed our inventory at Rebrickable
as well.
Thea
|
|
Author: | randyf | Posted: | Apr 10, 2019 01:26 | Subject: | Re: Inventory Change Request for Set 4712-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Maximilien writes:
| Please make changes to the following inventory:
* Add 1 Part 3626bpb0388 Orange Minifigure, Head Pumpkin Jack O' Lantern with Vertical Lines on Back Pattern - Blocked Open Stud (Alternate)
Comments from Submitter:
The "pumpkin" head I have in my set is different from the one seen on the instruction booklet. I see other owners selling the set on eBay with the same alternative head...
|
The pumpkin head you are trying to add as an alternate was first released in
a LEGO game in 2009:
[g=3837]
The Harry Potter set was released in 2002.
There is absolutely no way that a part from 2009 could travel back in time to
2002 to be in a set that it could never have been in.
I am sorry, but the part in your set and the others on eBay are the wrong part
if they are not
This request will not be accepted.
- Randy
|
|
Author: | SezaR | Posted: | Apr 9, 2019 23:17 | Subject: | Inventory Change Request for Set 7720-1 | Viewed: | 36 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 4022c01 Black Train Buffer Beam with Black Train Coupling Old and Black Magnet Cylindrical (4022 / 4023 / 73092) (Counterpart)
|
Author: | SezaR | Posted: | Apr 9, 2019 23:16 | Subject: | Inventory Change Request for Set 7715-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 4022c01 Red Train Buffer Beam with Black Train Coupling Old and Black Magnet Cylindrical (4022 / 4023 / 73092) (Counterpart)
|
Author: | Maximilien | Posted: | Apr 9, 2019 15:40 | Subject: | Inventory Change Request for Set 4712-1 | Viewed: | 47 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3626bpb0388 Orange Minifigure, Head Pumpkin Jack O' Lantern with Vertical Lines on Back Pattern - Blocked Open Stud (Alternate)
Comments from Submitter:
The "pumpkin" head I have in my set is different from the one seen on the instruction booklet. I see other owners selling the set on eBay with the same alternative head...
|
|
Author: | normann1974 | Posted: | Apr 9, 2019 15:38 | Subject: | Inventory Change Request for Set 75155-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4085d Black Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) (Alternate) (match ID 3)
Comments from Submitter:
I forgot this in my previous update: Found two black o-clip style parts in the parted out set. Please set match ID 3 on inventory line 719279 (IR form is broken and will not allow me to do it).
|
|
Author: | normann1974 | Posted: | Apr 9, 2019 15:16 | Subject: | Inventory Change Request for Set 75172-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4085d Dark Bluish Gray Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) (Alternate) (match ID 4)
* Change 2 Part Dark Bluish Gray {4085d Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) to 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip)} {match ID 0 to 4}
Comments from Submitter:
Just parted out this set and found two DBG with thin u-clips.
|
|
Author: | normann1974 | Posted: | Apr 9, 2019 14:03 | Subject: | Inventory Change Request for Set 75155-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 44567b Yellow Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove (Alternate) (match ID 2)
* Change 2 Part Yellow {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove} {match ID 0 to 2}
Comments from Submitter:
Just parted out this set and found one of each.
|
|
Author: | ziddi | Posted: | Apr 9, 2019 09:01 | Subject: | Inventory Change Request for Set 5848-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30216pb01 Dark Pink Boat Bow Brick 16 x 16 x 1 with 4 x 6 Cutout with 'Belville' Pattern (Sticker) - Set 5848 (Counterpart)
|
|
Author: | BricksShop | Posted: | Apr 8, 2019 23:37 | Subject: | Inventory Change Request for Set 75087-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 14769pb014 White Tile, Round 2 x 2 with Bottom Stud Holder with SW Republic Pattern on White Background (Sticker) (Counterpart)
* Add 1 Part 4150pb002b White Tile, Round 2 x 2 with SW Republic Pattern on White Background (Sticker) (Counterpart)
Comments from Submitter:
The sticker from the set is exactly the existing number I've added. Part is physically available at us.
|
|
Author: | randyf | Posted: | Apr 8, 2019 17:15 | Subject: | Re: Inventory Change Request for Set 7904-25 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, Maximilien writes:
| Please make changes to the following inventory:
* Add 2 Part 3004 Red Brick 1 x 2
* Delete 5 Part 3004 Red Brick 1 x 2
Comments from Submitter:
7 red 1x2 bricks are actually used in that set, not extra. 6 for the chimney (1 at rear for level 1 - 2 on each sides for level 2 - 2 on each sides and 1 at rear for level 3 - with an arch at front) and 1 as a gift pack in the brown box.
|
Nice catch!
Yep, I tried building it in LDD without the other two red bricks and it leaves
two holes in the back of the chimney unfilled. I have a feeling they were supposed
to be filled.
Cheers,
Randy
|
|
Author: | Maximilien | Posted: | Apr 8, 2019 13:40 | Subject: | Re: Inventory Change Request for Set 7904-25 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, Maximilien writes:
| Please make changes to the following inventory:
* Add 2 Part 3004 Red Brick 1 x 2
* Delete 5 Part 3004 Red Brick 1 x 2
Comments from Submitter:
7 red 1x2 bricks are actually used in that set, not extra. 6 for the chimney (1 at rear for level 1 - 2 on each sides for level 2 - 2 on each sides and 1 at rear for level 3 - with an arch at front) and 1 as a gift pack in the brown box.
|
Oops ! I misused the form, apparently...
I don't want to delete 5 parts, I just want to move the 2 red bricks from
extra to regular, sorry...
|
|
Author: | Maximilien | Posted: | Apr 8, 2019 13:38 | Subject: | Inventory Change Request for Set 7904-25 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3004 Red Brick 1 x 2
* Delete 5 Part 3004 Red Brick 1 x 2
Comments from Submitter:
7 red 1x2 bricks are actually used in that set, not extra. 6 for the chimney (1 at rear for level 1 - 2 on each sides for level 2 - 2 on each sides and 1 at rear for level 3 - with an arch at front) and 1 as a gift pack in the brown box.
|
Author: | lego.12vtrains | Posted: | Apr 8, 2019 10:47 | Subject: | Re: Inventory Change Request for Set 5005-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| Here below I attach the pictures of a MISB Service pack 5005, you can clearly
recognize the paper 113582-D/F/I.
|
|
Author: | lego.12vtrains | Posted: | Apr 8, 2019 10:44 | Subject: | Inventory Change Request for Set 5005-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 113582 (Not Applicable) Paper, Information Note, Use of Battery Box - 113582-D/F/I
|
Author: | FreeStorm | Posted: | Apr 8, 2019 09:21 | Subject: | Inventory Change Request for Set 8168-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 50373pb06 Red Wedge, Brick 3 x 4 with Stud Notches with Ferrari Logo and White 'ETIHAD' on Red Background Pattern on Both Sides (Stickers) - Set 8185, 8168 (Counterpart)
|
|
Author: | FreeStorm | Posted: | Apr 8, 2019 09:20 | Subject: | Inventory Change Request for Set 8185-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 6091pb015L Red Brick, Modified 1 x 2 x 1 1/3 with Curved Top with Silver Grille and Orange Headlight on Red Background Pattern Model Left Side (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6091pb015R Red Brick, Modified 1 x 2 x 1 1/3 with Curved Top with Silver Grille and Orange Headlight on Red Background Pattern Model Right Side (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6091pb014L Red Brick, Modified 1 x 2 x 1 1/3 with Curved Top with Silver Headlight on Red Background Pattern Model Left Side (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6081pb025L Red Brick, Modified 2 x 4 x 1 1/3 with Curved Top with Silver and Gray Vents Pattern Model Left Side (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6081pb025R Red Brick, Modified 2 x 4 x 1 1/3 with Curved Top with Silver and Gray Vents Pattern Model Right Side (Sticker) - Set 8185 (Alternate)
* Add 1 Part 6636pb187 Red Tile 1 x 6 with 'AW 547 JN' License Plate and Black lines on Red Background Pattern (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6636pb188 Red Tile 1 x 6 with Black and Silver Grille on Red Background Pattern (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6636pb189 Red Tile 1 x 6 with Black Grille and Black Lines on Red Background Pattern (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6636pb190 Red Tile 1 x 6 with Ferrari Logo and 'SF SCUDERIA FERRARI' on Red Background Pattern (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 6636pb186 Red Tile 1 x 6 with Silver 'EUROCARGO' and Black lines on Red Background Pattern (Sticker) - Set 8185 (Counterpart)
* Add 1 Part 50373pb06 Red Wedge, Brick 3 x 4 with Stud Notches with Ferrari Logo and White 'ETIHAD' on Red Background Pattern on Both Sides (Stickers) - Set 8185, 8168 (Counterpart)
|
|
Author: | bje | Posted: | Apr 8, 2019 07:46 | Subject: | Re: Inventory Change Request for Set 6736-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| Image |
|
Author: | bje | Posted: | Apr 8, 2019 07:45 | Subject: | Inventory Change Request for Set 6736-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 2453a Light Yellow Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud (Alternate) (match ID 1)
Comments from Submitter:
From new set, image to follow
|
Author: | bje | Posted: | Apr 8, 2019 06:20 | Subject: | Re: Inventory Change Request for Set 6734-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| Image |
|
Author: | bje | Posted: | Apr 8, 2019 06:17 | Subject: | Inventory Change Request for Set 6734-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 32064c Black Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports (Alternate)
Comments from Submitter:
From sealed set, image to follow
|
Author: | ZwarteMagica | Posted: | Apr 8, 2019 02:26 | Subject: | Inventory Change Request for Set 4589-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 6215pb06 Dark Gray Brick, Modified 2 x 3 with Curved Top White '52' on Black Background Pattern (Sticker) - Set 4589 (Counterpart)
|
Author: | ZwarteMagica | Posted: | Apr 8, 2019 01:48 | Subject: | Inventory Change Request for Set 8154-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 50947pb031L Dark Bluish Gray Vehicle, Mudguard 1 x 4 1/2 with Headlight and Orange Stripe Pattern Model Left Side (Sticker) - Set 8154 (Counterpart)
* Add 1 Part 50947pb031R Dark Bluish Gray Vehicle, Mudguard 1 x 4 1/2 with Headlight and Orange Stripe Pattern Model Right Side (Sticker) - Set 8154 (Counterpart)
|
|
Author: | axaday | Posted: | Apr 7, 2019 22:56 | Subject: | Re: Inventory Change Request for Set 7573-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 5 Part Pearl Gold {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 6 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
Pics following. And I have another surprise, but I'm getting these out of the way because they are easy.
|
|
|
|
Author: | axaday | Posted: | Apr 7, 2019 22:55 | Subject: | Inventory Change Request for Set 7573-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 5 Part Pearl Gold {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 6 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
Pics following. And I have another surprise, but I'm getting these out of the way because they are easy.
|
|
Author: | normann1974 | Posted: | Apr 7, 2019 16:16 | Subject: | Inventory Change Request for Set 42079-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 32580 Black Hose, Soft Axle 7L (Extra)
Comments from Submitter:
I just parted out three of this set and got 7 hoses. I checked the numbers on the boxes and the first 5-digit number seems to indicate that the sets there were from two different production runs or factories (I don't know what the numbers mean, but the number was identical on two of the boxes).
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|