Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | starbeanie  | | Posted: | Feb 8, 2019 16:36 | | Subject: | Re: Please approve, in hand | | Viewed: | 37 times | | Topic: | Catalog | |
| Sweet Mayhem and Benny will be limited also.
In Catalog, yorbrick writes:
| | In Catalog, Rakali writes:
| | In Catalog, tEoS writes:
| | I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
I'm hoping they do release worldwide, and not limited. It would be stupid
not to. If they don't release Emmet and Wyldstyle, then there is no point
in wider releases of Sweet Mayhem and Benny.
|
|
 |
| Author: | koost | | Posted: | Feb 8, 2019 13:09 | | Subject: | Inventory Change Request for Set 6451-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4592c03 Black Lever Small Base with Light Gray Lever (Extra)
* Add 1 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
|
|
| Author: | randyf | | Posted: | Feb 8, 2019 13:00 | | Subject: | Re: Inventory Change Request for Book B100 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, FreeStorm writes:
| | [joke mode=on]
WHATTT!!! You didn't buy a sealed set to complete the catalog???
I hopped you are going to buy a sealed set every time the catalog needed 
[joke mode=off]
|
You would think so, right?!? 
Actually, I do not mind buying sealed sets for verifying the catalog when I want
them in my collection and the price is reasonable. For this one, the price was
reasonable, but I just didn't want it! 
| | This time I made the compulsive buy, I hope it will arrive sealed
|
Very nice! Your commitment is commendable! 
Randy
|
|
| Author: | Brixalotl | | Posted: | Feb 8, 2019 12:46 | | Subject: | Inventory Change Request for Set 70500-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 17114 Dark Bluish Gray Technic, Brick Modified 2 x 2 with Balls with Holes and Axle Hole (Alternate) (match ID 2)
* Add 2 Part 21459 Pearl Gold Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Alternate) (match ID 3)
* Add 3 Part 14769 Pearl Gold Tile, Round 2 x 2 with Bottom Stud Holder (Alternate) (match ID 4)
* Change 1 Part Dark Bluish Gray 57908 Technic, Brick Modified 2 x 2 with Balls {match ID 0 to 2}
* Change 2 Part Pearl Gold 30173b Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Uncapped Pommel and Hole in Hilt {match ID 0 to 3}
* Change 3 Part Pearl Gold 4150 Tile, Round 2 x 2 {match ID 0 to 4}
Comments from Submitter:
confirmed during part out, thanks
|
|
| Author: | yoavheskia | | Posted: | Feb 8, 2019 11:20 | | Subject: | Re: Please help identify color | | Viewed: | 40 times | | Topic: | Colors | |
| In Colors, pikachu3 writes:
| | In Colors, yoavheskia writes:
| | In Colors, WoutR writes:
| | In Colors, yoavheskia writes:
| | Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
So maybe this is the 73rd color?!?
|
Are the two 1x2 bricks different colors? They look a little off in my screen.
If they aren't the same color, then it looks like the left one is Medium
Yellowish Orange and the right one (and the 2x4) is Warm Yellowish Orange.
|
Yes. the 1x2 bricks is not in the same color.
the right 1x2 is "light orange" (b.l name) the left 1x2 is the common now days
"bright light orange" (b.l name)
i'm sure that the brick i have is not bright light orange, not medium orange
and not very light orange. i'm almost sure the color is Medium Yellowish
Orange. it looks perfect when i add it to your picture (by the way- great job-
it realy helps me to get by with all the millions colors out there).
|
|
|
| Author: | Brixalotl | | Posted: | Feb 8, 2019 10:39 | | Subject: | Inventory Change Request for Set 70227-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44567 Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type)
* Add 1 Part 44567a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove
Comments from Submitter:
confirmed during part out, thanks
|
|
| Author: | pikachu3 | | Posted: | Feb 8, 2019 10:19 | | Subject: | Re: Please help identify color | | Viewed: | 37 times | | Topic: | Colors | |
| In Colors, yoavheskia writes:
| | In Colors, WoutR writes:
| | In Colors, yoavheskia writes:
| | Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
So maybe this is the 73rd color?!?
|
Are the two 1x2 bricks different colors? They look a little off in my screen.
If they aren't the same color, then it looks like the left one is Medium
Yellowish Orange and the right one (and the 2x4) is Warm Yellowish Orange.
|
|
| Author: | pikachu3 | | Posted: | Feb 8, 2019 10:16 | | Subject: | Re: Please help identify color | | Viewed: | 42 times | | Topic: | Colors | |
| In Colors, yoavheskia writes:
| | I think the 2x4 brick is really light orange , but it's not warm yellowish
orange (color no. 225). the corect color is Medium Yellowish Orange (color no.
121). it's defently not Flame Yellowish Orange (color no.191)
I'm looking for a 3001 master who can tell the exact color.
|
Those are my pictures Medium Yellowish Orange and Warm Yellowish Orange are
very close, so it's hard to compare photos taken in different lighting conditions.
Your best bet is to find a part you *know* is Medium Yellowish Orange and compare
in person. I can take a comparison pic of the oranges I have, if it will help.
Yes, I think my modern 3001 collection is the largest, but Medium Yellowish Orange
is one I'm missing. (There may also be a Pearl Gold, but I haven't seen
any in the wild yet.)
|
|
| Author: | yoavheskia | | Posted: | Feb 8, 2019 07:38 | | Subject: | Re: Please help identify color | | Viewed: | 46 times | | Topic: | Colors | |
| In Colors, WoutR writes:
| | In Colors, yoavheskia writes:
| | Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
So maybe this is the 73rd color?!?
|
|
|
| Author: | FreeStorm | | Posted: | Feb 8, 2019 07:19 | | Subject: | Re: Inventory Change Request for Book B100 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In Inventories Requests, JayEssBee writes:
| | Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5
Comments from Submitter:
This item is shown in a photo in the Klutz book of each of the included parts and is labeled "huge rubber band." (See Bricklink image of Item B100)
|
The part you are trying to add is much smaller than the huge rubber band in this
book. In fact, it is not a rubber band at all. It's a rubber belt.
There is a note at the bottom of the inventory page for this book which states:
"Incomplete. Missing huge rubber band shown on parts list."
Upon looking, this huge rubber band is not in the BrickLink catalog, so the inventory
for now will remain incomplete.
This request will be rejected.
Randy
|
Randyy
[joke mode=on]
WHATTT!!! You didn't buy a sealed set to complete the catalog???
I hopped you are going to buy a sealed set every time the catalog needed
[joke mode=off]
This time I made the compulsive buy, I hope it will arrive sealed
-Fred
|
|
| Author: | yorbrick | | Posted: | Feb 8, 2019 04:19 | | Subject: | Re: Please approve, in hand | | Viewed: | 63 times | | Topic: | Catalog | |
| In Catalog, Rakali writes:
| | In Catalog, tEoS writes:
| | I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
I'm hoping they do release worldwide, and not limited. It would be stupid
not to. If they don't release Emmet and Wyldstyle, then there is no point
in wider releases of Sweet Mayhem and Benny.
|
|
| Author: | SteinchendeaIer | | Posted: | Feb 8, 2019 02:25 | | Subject: | Problem with new Sticker Items | | Viewed: | 121 times | | Topic: | Catalog | | Status: | Open | |
| Hello everybody,
I have created a part with stickers that are not yet in my catalog and a new
minifigure that is currently available in Germany directly in the store to buy
Nothing has been released so far, so I wanted to ask if I did something wrong?
greeting
Florian
|
|
|
| Author: | Rakali | | Posted: | Feb 7, 2019 23:13 | | Subject: | Re: Please approve, in hand | | Viewed: | 94 times | | Topic: | Catalog | |
| In Catalog, tEoS writes:
| | I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
|
41999 was bad enough, but that was more quantity, a smaller audience, and worldwide.
Releasing these with no notice and just to Wal-Mart in the US is a dick move.
It's not like they are fringe characters either, a lot of people like these
two, it just doesn't make sense to not release these popular characters worldwide
to take advantage of the movie.
I'm all for scumbag reselling, you have to hate the game not the player.
LEGO shouldn't be enabling this in the first place, just like 41999, just
like the series 18 Policeman. I'm all for taking advantage as a seller, but
I don't agree the opportunity should exist in the first place.
|
|
| Author: | randyf | | Posted: | Feb 7, 2019 22:46 | | Subject: | Re: Inventory Change Request for Book B100 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, JayEssBee writes:
| | Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5
Comments from Submitter:
This item is shown in a photo in the Klutz book of each of the included parts and is labeled "huge rubber band." (See Bricklink image of Item B100)
|
The part you are trying to add is much smaller than the huge rubber band in this
book. In fact, it is not a rubber band at all. It's a rubber belt.
There is a note at the bottom of the inventory page for this book which states:
"Incomplete. Missing huge rubber band shown on parts list."
Upon looking, this huge rubber band is not in the BrickLink catalog, so the inventory
for now will remain incomplete.
This request will be rejected.
Randy
|
|
| Author: | tEoS | | Posted: | Feb 7, 2019 21:08 | | Subject: | Re: Please approve, in hand | | Viewed: | 83 times | | Topic: | Catalog | |
| I'm beginning to grow tired with Lego. I visit eurobricks, brickset, brothersbrick,
rebrickable, and s@h as often as possible and still cannot seem to stay in the
Lego loop. Last year(?) I missed out on the classic set exclusives, some s@h
specials, and now these special sets.
In Catalog, Dalika writes:
| | In Catalog Requests, speshy writes:
| | Are those the limited edition brickheadz? Got any pics?
K
|
I saw them and thought they were WM exclusives.
| |
In Catalog Requests, starbeanie writes:
| | Please approve. I received them today.
Thanks.
|
|
|
|
|
| Author: | starbeanie | | Posted: | Feb 7, 2019 19:37 | | Subject: | Re: Please approve, in hand | | Viewed: | 70 times | | Topic: | Catalog | |
| My phone wont take a pic small enough to upload!!!
In Catalog, speshy writes:
| | Are those the limited edition brickheadz? Got any pics?
K
In Catalog Requests, starbeanie writes:
| | Please approve. I received them today.
Thanks.
|
|
|
| Author: | Dalika | | Posted: | Feb 7, 2019 18:15 | | Subject: | Re: Please approve, in hand | | Viewed: | 75 times | | Topic: | Catalog | |
| In Catalog Requests, speshy writes:
| | Are those the limited edition brickheadz? Got any pics?
K
|
I saw them and thought they were WM exclusives.
| |
In Catalog Requests, starbeanie writes:
| | Please approve. I received them today.
Thanks.
|
|
|
|
| Author: | starbeanie | | Posted: | Feb 7, 2019 18:05 | | Subject: | Re: Please approve, in hand | | Viewed: | 64 times | | Topic: | Catalog | |
| Limited to 5000. So, not exactly rare. I can post pics in a bit. Out at dinner
now.
In Catalog Requests, speshy writes:
| | Are those the limited edition brickheadz? Got any pics?
K
In Catalog Requests, starbeanie writes:
| | Please approve. I received them today.
Thanks.
|
|
|
| Author: | speshy | | Posted: | Feb 7, 2019 17:57 | | Subject: | Re: Please approve, in hand | | Viewed: | 66 times | | Topic: | Catalog | |
| Are those the limited edition brickheadz? Got any pics?
K
In Catalog Requests, starbeanie writes:
| | Please approve. I received them today.
Thanks.
|
|
| Author: | starbeanie | | Posted: | Feb 7, 2019 17:34 | | Subject: | Please approve, in hand | | Viewed: | 206 times | | Topic: | Catalog | | Status: | Open | |
| Please approve. I received them today.
Thanks.
|
| Author: | WoutR | | Posted: | Feb 7, 2019 17:25 | | Subject: | Re: Please help identify color | | Viewed: | 36 times | | Topic: | Colors | |
| In Colors, yoavheskia writes:
| | Thank you!
You are the man behind the list? I didn't know that. great work!
|
Yes I am, that is my Flickr page.
I think that Pikachu3 has the only complete collection of 3001 in all the known
colors.
|
|
| Author: | Adjour | | Posted: | Feb 7, 2019 15:57 | | Subject: | Re: 5987 Instructions | | Viewed: | 23 times | | Topic: | Catalog | |
| In Catalog, baylit writes:
| | It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
I encounter this occasionally, I just make a note in the description. I do think
however that images and notes should be added to the catalog.
I've also seen pictures of "instructions" that are likely just images of
the box art (shape is wrong etc)
|
|
| Author: | JayEssBee | | Posted: | Feb 7, 2019 15:41 | | Subject: | Inventory Change Request for Book B100 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part x90 Yellow Rubber Belt Extra Large (Round Cross Section) - Approx. 5 x 5
Comments from Submitter:
This item is shown in a photo in the Klutz book of each of the included parts and is labeled "huge rubber band." (See Bricklink image of Item B100)
|
| Author: | yoavheskia | | Posted: | Feb 7, 2019 15:22 | | Subject: | Re: Please help identify color | | Viewed: | 54 times | | Topic: | Colors | |
| Thank you!
You are the man behind the list? I didn't know that. great work!
|
| Author: | Biglesdug | | Posted: | Feb 7, 2019 14:36 | | Subject: | Re: Inventory Change Request for Minifig tls095 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In Inventories Requests, Biglesdug writes:
| | Randy I upload a photo of the correct tan pants for that figure. I'm not
sure if I should of entered it as the same part number (print looks the same)
or as a new part number?
|
Same part number, just different color.
Cheers,
Randy
|
ok its there as well as a new picture to use for the torso of that figure.
|
|
| Author: | moreshelfspace | | Posted: | Feb 7, 2019 13:52 | | Subject: | Re: Standardize name for belt with ammunition | | Viewed: | 34 times | | Topic: | Catalog | |
| Awesome, thank you!
In Catalog, randyf writes:
| | In Catalog, kurotakajo writes:
| | Some torsos have "ammunition belt" in their description and others "bandolier".
My personal vote is "ammunition belt". It makes it difficult to find a torso
in the catalog when you don't know the character or theme.
For example: "Torso Pharaoh's Quest Tan Waistcoat, White Shirt, Bandolier
and Silver Buckle Pattern (Jake Raines) / Tan Arms / Yellow Hands" (973pb0781c01)
"Torso Monster Fighters with Ammunition Belt Pattern / Dark Tan Arms / Yellow
Hands" (973pb1113c01)
These two items are similar-looking.
|
You can submit any name change you would like using the following form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The catalog admins will then decide whether the change will be accepted or not.
Cheers,
Randy
|
|
|
| Author: | yoavheskia | | Posted: | Feb 7, 2019 08:01 | | Subject: | Re: Help to identify this color | | Viewed: | 58 times | | Topic: | Colors | |
| | Maybe it's Medium Yellowish Orange (color id 121)? |
|
| Author: | randyf | | Posted: | Feb 6, 2019 22:52 | | Subject: | Re: NJO399 and NJO410 | | Viewed: | 27 times | | Topic: | Catalog | |
| In Catalog, Crafteewon writes:
| | In Catalog, randyf writes:
| | In Catalog, Crafteewon writes:
| | In Catalog, Crafteewon writes:
| | NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
Type [m = njo399] and [m = njo410] without the spaces around the
equal signs.
Cheers,
Randy
|
Thank you.
|
I think you meant to put this one:
|
|
| Author: | baylit | | Posted: | Feb 6, 2019 22:27 | | Subject: | Re: 5987 Instructions | | Viewed: | 22 times | | Topic: | Catalog | |
| I didn't take a picture but the back side is similarly rotated differently
for each version
In Catalog, tEoS writes:
| | Interesting find. I have the "landscape" print version and can confirm that
the opposite side is not the "portrait" print side you've shown.
In Catalog, baylit writes:
| | It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
|
|
| Author: | baylit | | Posted: | Feb 6, 2019 22:26 | | Subject: | Re: 5987 Instructions | | Viewed: | 26 times | | Topic: | Catalog | |
| I didn't take a picture, but the reverse are similarly rotated differently
In Catalog, tEoS writes:
| | Interesting find. I have the "landscape" print version and can confirm that
the opposite side is not the "portrait" print side you've shown.
In Catalog, baylit writes:
| | It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
|
|
| Author: | Crafteewon | | Posted: | Feb 6, 2019 22:15 | | Subject: | Re: NJO399 and NJO410 | | Viewed: | 24 times | | Topic: | Catalog | |
| In Catalog, randyf writes:
| | In Catalog, Crafteewon writes:
| | In Catalog, Crafteewon writes:
| | NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
Type [m = njo399] and [m = njo410] without the spaces around the
equal signs.
Cheers,
Randy
|
Thank you.
|
|
| Author: | tEoS | | Posted: | Feb 6, 2019 22:13 | | Subject: | Re: 5987 Instructions | | Viewed: | 27 times | | Topic: | Catalog | |
| Interesting find. I have the "landscape" print version and can confirm that
the opposite side is not the "portrait" print side you've shown.
In Catalog, baylit writes:
| | It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
|
| Author: | randyf | | Posted: | Feb 6, 2019 22:03 | | Subject: | Re: NJO399 and NJO410 | | Viewed: | 27 times | | Topic: | Catalog | |
| In Catalog, Crafteewon writes:
| | In Catalog, Crafteewon writes:
| | NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
Type [m = njo399] and [m = njo410] without the spaces around the
equal signs.
Cheers,
Randy
|
|
| Author: | baylit | | Posted: | Feb 6, 2019 21:54 | | Subject: | 5987 Instructions | | Viewed: | 67 times | | Topic: | Catalog | | Status: | Open | |
| It appears that there were 2 versions of the instructions with different cover
page orientations - 1 landscape and 1 portrait.
Perhaps this has happened a lot. First time I've noticed it.
See image.
How is this addressed in the Bricklink inventory catalog - or should it be?
|
|
| Author: | Crafteewon | | Posted: | Feb 6, 2019 21:52 | | Subject: | Re: NJO399 and NJO410 | | Viewed: | 16 times | | Topic: | Catalog | |
| In Catalog, Crafteewon writes:
| | NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
Sorry should have clarified I am wanting to know how to have the link and photo
appear in the post.
|
|
| Author: | Crafteewon | | Posted: | Feb 6, 2019 21:43 | | Subject: | NJO399 and NJO410 | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
| NJO399 and NJO 410.
Just wondering if these should be moved to the ninjago minifigure category instead
of the junior category.
Just thinking someone looking for Ninjago wouldn’t look under Junior to find
them.
Also if someone can tell me how to list them so the link and photo appears it
would be greatly appreciated.
Thanks
Edward
|
| Author: | randyf | | Posted: | Feb 6, 2019 21:01 | | Subject: | Re: Inventory Change Request for Minifig tls095 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Biglesdug writes:
| | Randy I upload a photo of the correct tan pants for that figure. I'm not
sure if I should of entered it as the same part number (print looks the same)
or as a new part number?
|
Same part number, just different color.
Cheers,
Randy
|
|
| Author: | MidwestBrick | | Posted: | Feb 6, 2019 17:05 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 44 times | | Topic: | Suggestions | |
| In Suggestions, runner.caller writes:
| | In Suggestions, MidwestBrick writes:
| | In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
The other site that has various categories of Used was the #1 reason I will never
use it, unless BL goes away. I do not want to have to make my judgment call
and "hope" that the buyer has the same judgment call on what category of "used"
I selected.
Here is my advice when buying Used. Buy from various sources, when you find
a source that sells you crap compared to others... don't buy from the crap
store anymore and continue buying from the stores that treat you well. For example,
a large % of my Used pieces I am confident I could put down "like-new" and maybe
even sell them as "new" and no one would know the difference. I surely don't
do that but I'm trying to make a point. I don't make too many comments
on Used Items because it isn't necessary. Buyers that purchase from me multiple
times know what to expect, that a large percentage of Used items will be in good-great
condition unless I did make a notation about a specific dent, scratch, etc...
but didn't want to toss the piece as it has value to it, however, still have
the notation that it any piece is Used and could have been played with.
I don't think we need any Buyer Rating system either. This will only cause
uproar when our opinions are ever so slightly different.
Each Store can make their own process as they see fit. I have no issue with anyone
taking the time to do this. I certainly do not have the time to "judge" every
piece though. It would literally be sorting everything once which takes long
enough, and then sorting them all again and instead of having 2 main locations
for items stored (new and used) you would need 4 or 5 or who knows how many to
make sure you are pulling from the correct drawer, bag or akro-mill slot, etc...
There is Positive, Neutral and Negative Feedback available if, as a buyer, anyone
does not agree with what they received from what they purchased.
I understand your argument but I, and I assume many others here, do not have
another 4-8 hours per day to put into subjective scoring. Thanks
|
+1
|
Thank you, I appreciate that.
|
|
| Author: | runner.caller | | Posted: | Feb 6, 2019 16:39 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 27 times | | Topic: | Suggestions | |
| In Suggestions, MidwestBrick writes:
| | In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
The other site that has various categories of Used was the #1 reason I will never
use it, unless BL goes away. I do not want to have to make my judgment call
and "hope" that the buyer has the same judgment call on what category of "used"
I selected.
Here is my advice when buying Used. Buy from various sources, when you find
a source that sells you crap compared to others... don't buy from the crap
store anymore and continue buying from the stores that treat you well. For example,
a large % of my Used pieces I am confident I could put down "like-new" and maybe
even sell them as "new" and no one would know the difference. I surely don't
do that but I'm trying to make a point. I don't make too many comments
on Used Items because it isn't necessary. Buyers that purchase from me multiple
times know what to expect, that a large percentage of Used items will be in good-great
condition unless I did make a notation about a specific dent, scratch, etc...
but didn't want to toss the piece as it has value to it, however, still have
the notation that it any piece is Used and could have been played with.
I don't think we need any Buyer Rating system either. This will only cause
uproar when our opinions are ever so slightly different.
Each Store can make their own process as they see fit. I have no issue with anyone
taking the time to do this. I certainly do not have the time to "judge" every
piece though. It would literally be sorting everything once which takes long
enough, and then sorting them all again and instead of having 2 main locations
for items stored (new and used) you would need 4 or 5 or who knows how many to
make sure you are pulling from the correct drawer, bag or akro-mill slot, etc...
There is Positive, Neutral and Negative Feedback available if, as a buyer, anyone
does not agree with what they received from what they purchased.
I understand your argument but I, and I assume many others here, do not have
another 4-8 hours per day to put into subjective scoring. Thanks
|
+1
|
|
| Author: | WoutR | | Posted: | Feb 6, 2019 16:23 | | Subject: | Re: Please help identify color | | Viewed: | 67 times | | Topic: | Colors | |
| In Colors, yoavheskia writes:
| | I think the 2x4 brick is really light orange , but it's not warm yellowish
orange (color no. 225). the corect color is Medium Yellowish Orange (color no.
121). it's defently not Flame Yellowish Orange (color no.191)
I'm looking for a 3001 master who can tell the exact color.
|
I can make a photo of all your reference colours with added Medium Yellowish
Orange and Warm Yellowish Orange. It will probably be a few days before I can
make time for that.
Also, the list only contains known colors for 3001. It is possible that more
colors were made. The list is updated when new colors are confirmed.
|
|
| Author: | MidwestBrick | | Posted: | Feb 6, 2019 16:18 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 38 times | | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
The other site that has various categories of Used was the #1 reason I will never
use it, unless BL goes away. I do not want to have to make my judgment call
and "hope" that the buyer has the same judgment call on what category of "used"
I selected.
Here is my advice when buying Used. Buy from various sources, when you find
a source that sells you crap compared to others... don't buy from the crap
store anymore and continue buying from the stores that treat you well. For example,
a large % of my Used pieces I am confident I could put down "like-new" and maybe
even sell them as "new" and no one would know the difference. I surely don't
do that but I'm trying to make a point. I don't make too many comments
on Used Items because it isn't necessary. Buyers that purchase from me multiple
times know what to expect, that a large percentage of Used items will be in good-great
condition unless I did make a notation about a specific dent, scratch, etc...
but didn't want to toss the piece as it has value to it, however, still have
the notation that it any piece is Used and could have been played with.
I don't think we need any Buyer Rating system either. This will only cause
uproar when our opinions are ever so slightly different.
Each Store can make their own process as they see fit. I have no issue with anyone
taking the time to do this. I certainly do not have the time to "judge" every
piece though. It would literally be sorting everything once which takes long
enough, and then sorting them all again and instead of having 2 main locations
for items stored (new and used) you would need 4 or 5 or who knows how many to
make sure you are pulling from the correct drawer, bag or akro-mill slot, etc...
There is Positive, Neutral and Negative Feedback available if, as a buyer, anyone
does not agree with what they received from what they purchased.
I understand your argument but I, and I assume many others here, do not have
another 4-8 hours per day to put into subjective scoring. Thanks
|
|
| Author: | yoavheskia | | Posted: | Feb 6, 2019 15:51 | | Subject: | Re: Please help identify color | | Viewed: | 90 times | | Topic: | Colors | |
| I think the 2x4 brick is really light orange , but it's not warm yellowish
orange (color no. 225). the corect color is Medium Yellowish Orange (color no.
121). it's defently not Flame Yellowish Orange (color no.191)
I'm looking for a 3001 master who can tell the exact color.
|
|
|
| Author: | Biglesdug | | Posted: | Feb 6, 2019 15:51 | | Subject: | Re: Inventory Change Request for Minifig tls095 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In Inventories Requests, Biglesdug writes:
| | Please make changes to the following inventory:
* Delete 1 Part 970c00pb842 Dark Tan Hips and Legs with Yellow Apron Pattern
Comments from Submitter:
Kidfest employee figure uses tan leg and hips with Yellow Apron Pattern not Dark Tan.
|
Yep, they definitely look tan to me. We will either correct the inventory once
the correct part is in the catalog or mark this entry for deletion and create
a new entry.
Cheers,
Randy
|
Randy I upload a photo of the correct tan pants for that figure. I'm not
sure if I should of entered it as the same part number (print looks the same)
or as a new part number?
|
|
| Author: | iprice | | Posted: | Feb 6, 2019 14:53 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 48 times | | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
I had a shipment of Lego parts recently that were a batch of new and used allegedly
"clean" Lego parts that all stank to high heaven of tobacco smoke. Some sellers
really don't care about the product at all. The b@stard even gave me a negative
feedback for complaining that a product I had paid good money for smelled terrible.
|
|
| Author: | elias3 | | Posted: | Feb 6, 2019 13:32 | | Subject: | Inventory Change Request for Set 60204-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
2x part out and found the -a type (for the 4x in total)
|
|
| Author: | Adjour | | Posted: | Feb 6, 2019 12:20 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 38 times | | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
I dunno, I notice most sellers don't even bother to describe their used parts
at all. So I find any description, even an opinion that may be slightly off from
mine, useful to me.
I've skipped sellers in the past due to no description (esp on expensive
instructions). Every junk part I've received has been on the cheaper end
with no description.
Anyway, I don't see a way to police this, honestly. Its too subjective. You
could have a rating system like ebay where you can rate the item "as described"
with up to 5 stars. However this means tons of sellers would now have to actually
take the time to describe their parts.
|
|
| Author: | calebfishn | | Posted: | Feb 6, 2019 11:00 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 37 times | | Topic: | Suggestions | |
| I think that many sellers know how to properly describe their lego and to ensure
that "used" lego is not junk. Bite marks, discolouration, deep scratches, and
damage are not part of what "used" means. All of those can only pass as filler
and should be clearly described as such.
I believe the best assurance a buyer has that used parts will be of good quality
is to choose a seller with a significant amount of positive feedback.
Buyers can also help themselves by regularly informing sellers if used parts
do not meet the standards for listing.
|
|
| Author: | edk | | Posted: | Feb 6, 2019 10:21 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 38 times | | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
Depends on how much more $ buyers want to pay for used parts tp compensate for
the added time involved with listing,sorting,storing multiple conditions of the
same part.
|
|
| Author: | brikomania | | Posted: | Feb 6, 2019 08:45 | | Subject: | Re: New and Used: more shades of grey are needed | | Viewed: | 35 times | | Topic: | Suggestions | |
| In Suggestions, JusTiCe8 writes:
| | Hi,
as a buyer, I found having only two choices for parts condition is far too basic
and not useful, mostly for buyers, but also for sellers who seek accuracy and
honesty regarding their inventory.
I mean, for now a seller can only pick new or used, but pretty much everyone
has his/her own standard and I got some used parts which are like new, some others
which are closer to the one way ticket to trash, if you see what I mean .
It's not good nor practical to force seller to put actual picture(s) of all
the used parts, both hobbyist and professional has better use of their time I
guess.
Plus, asking for every single part before ordering is not good either, some sellers
didn't took time to reply to potential buyer's question already.
And when seller put description, it's quite subjective, one adjective is
far to describe actual shape of a part: "bite marks, yellowish", ok but how many
marks, how deep ?
how much "yellowished" is the brick ?
Some may claims "quite good", some other "I can't send them to trash".
A quality score could be added to a used part. It would be used as well to set
the sell price, as trash-ready used parts can lower the infamous "average 6 months"
and lower ALL prices, which is very unfair for like new parts.
Any thoughts ?
|
In another site, there are different used ratings, Used (like new), used (good),
used (acceptable). i think this is a good idea.
Of course any seller can lie, and list a chewed part as like new, but then they
also could list a used set as new sealed if they wish, feedback should reflect
that.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
