BrickLink Discussion Forum

In Inventories, Admin_Russell writes:

In Inventories, Ricardo_Penguin writes:

In Inventories, Admin_Russell writes:

In Inventories, Ricardo_Penguin writes:

Hi, here's the part list for set 4002018-1 if someone would like to add the
pieces.

Looks like the only new pieces are the Figure Torsos and Santa's printed
face piece.
The set also comes with 4 instruction booklets. I also have a photo of the figures
someone if someone could add them to the catalog.
(There are 7 photos total)

Thanks

Do you have an original copy of the set?

Yes

If you opened it when it was sealed and have been careful with the parts, you
could do the inventory yourself and use Sealed Set Contents as the source.

Most of the data is autofilled for you when you use the "Manual" form:

https://www.bricklink.com/catalogInvAdd.asp

After that it's just a question of adding some minifigs and extras, and checking
the inventory against the parts that actually came in your set.

I got the set used, so can't guarantee 100% accuracy (Looks like it complete,
even comes with extra parts).

Also the whole 'catalog add or change' features confuse me, so that's
why I posted the parts list from the instructions, so someone whos used to doing
that can submit the parts forum.

Author:

Admin_Russell

Posted:

Jan 12, 2019 14:25

Subject:

Re: Lego 2018 Employee parts

Viewed:

84 times

Topic:

In Inventories, Ricardo_Penguin writes:

In Inventories, Admin_Russell writes:

In Inventories, Ricardo_Penguin writes:

Do you have an original copy of the set?

Yes

Author:

Emperor_Penguin

Posted:

Jan 12, 2019 14:17

Subject:

Re: Lego 2018 Employee parts

Viewed:

76 times

Topic:

In Inventories, Admin_Russell writes:

In Inventories, Ricardo_Penguin writes:

Do you have an original copy of the set?

Yes

Author:

Admin_Russell

Posted:

Jan 12, 2019 14:05

Subject:

Re: Lego 2018 Employee parts

Viewed:

63 times

Topic:

In Inventories, Ricardo_Penguin writes:

Do you have an original copy of the set?

Author:

Emperor_Penguin

Posted:

Jan 12, 2019 14:00

Subject:

Lego 2018 Employee parts

Viewed:

239 times

Topic:

Status:

Open

Author:

FreeStorm

Posted:

Jan 10, 2019 18:00

Subject:

Re: Wrong Decorated panel for set 6361-1

Viewed:

67 times

Topic:

In Inventories, FreeStorm writes:

Hello,

Something is wrong with inventory of set

6361-1 (Inv) Mobile Crane
152 Parts, 1 Minifigure, 1986
Sets: Town: Classic Town: Construction

My stickers do not correspond to catalog sticker sheet

6361stk01 Sticker Sheet for Set 6361 - Double Arrow (190145)
Parts: Sticker Sheet

is it multiple version? I have the same number 190145 on my stickers

As you can see at the attached picture (this picture is not from my set) the
stickers is the same as this part.

4215pb015 Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6624
Parts: Panel, Decorated

The Arrow is "Left Pattern" on both parts.

If we say the stickers is only attached on "Panel 1 x 4 x 3"

Do need I add a new part:
"Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6361"

Or we modify

4215pb015 Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6624
Parts: Panel, Decorated

- To remove note (both parts are the same on set 6361-1)
- To change set on part name

PS: I hope you can understand what I have in my mind

-Fred

I answer to my question

The box on my panel stickers is not the same as

4215pb015 Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6624
Parts: Panel, Decorated

The box look more higher (less square)

Author:

FreeStorm

Posted:

Jan 10, 2019 17:45

Subject:

Wrong Decorated panel for set 6361-1

Viewed:

105 times

Topic:

Status:

Open

Hello,

Something is wrong with inventory of set

6361-1 (Inv) Mobile Crane
152 Parts, 1 Minifigure, 1986
Sets: Town: Classic Town: Construction

My stickers do not correspond to catalog sticker sheet

6361stk01 Sticker Sheet for Set 6361 - Double Arrow (190145)
Parts: Sticker Sheet

is it multiple version? I have the same number 190145 on my stickers

As you can see at the attached picture (this picture is not from my set) the
stickers is the same as this part.

4215pb015 Panel 1 x 4 x 3 with Box and Arrow Left Pattern (Sticker) - Set 6624
Parts: Panel, Decorated

- To remove note (both parts are the same on set 6361-1)
- To change set on part name

PS: I hope you can understand what I have in my mind

-Fred

Author:

randyf

Posted:

Jan 7, 2019 22:20

Subject:

Re: 5804 Belville witch's cottage

Viewed:

37 times

Topic:

In Inventories, PieterLikesLego writes:

Dear community,

The inventory list at bricklink for 5804 (Belville witch's cottage) states
the inclusion of 1 trans-red plate, round 1x1 straight side (4037). However when
reading the instructions, it seems that 2 could be included: 1 at the top of
the yellow bottle and 1 underneath the skeleton head inside the globe. However,
this is difficult to see. Can anyone help here?

Thanks,

Pieter

Good catch! Yes, it looks like their should definitely be two of this part in
the set, one underneath the skeleton head and one on the trans-yellow 1x1 cone.
I have attached an image of the last picture of the fully built set from the
instructions showing the two plates circled.

I will update the inventory accordingly. Thanks for bringing this to our attention!

Cheers,
Randy

Author:

bb1302345

Posted:

Jan 7, 2019 11:48

Subject:

5804 Belville witch's cottage

Viewed:

57 times

Topic:

Status:

Open

Author:

Hygrotus

Posted:

Jan 6, 2019 15:35

Subject:

Re: Missing piece in set 6246

Viewed:

39 times

Topic:

In Feedback, Tenne writes:

Hi BrickLink,

the partlist of set

6246-1 (Inv) Crocodile Cage
51 Parts, 2 Minifigures, 1994
Sets: Pirates: Pirates I: Islanders

(LegoCrocodile Cage) is missing a part.
Part thats missing:

4498 Minifigure Arrow Quiver with 2 Arrows
Parts: Minifigure, Body Wear

(LegoMinifigure, Arrow Quiver with Two Arrows).

I own two of the sets and controlled the instructions.

Best Regards
Thomas

Hi

It is a part of this minifig

Minifig No: pi079 Name: Islander, Male with Quiver

pi079 (Inv) Islander, Male with Quiver
Minifigures: Pirates: Pirates I: Islanders

from this set.
When you are on inventory page for this set choose option break minifigs. Then
will you have it also on the list.

Author:

Tenne

Posted:

Jan 6, 2019 15:30

Subject:

Missing piece in set 6246

Viewed:

94 times

Topic:

Status:

Open

Hi BrickLink,

the partlist of set 6246-1 (LegoCrocodile Cage) is missing a part.
Part thats missing: 4498 (LegoMinifigure, Arrow Quiver with Two Arrows).

I own two of the sets and controlled the instructions.

Best Regards
Thomas

Author:

randyf

Posted:

Jan 5, 2019 02:35

Subject:

Re: Pop-Up Party Bus (70828-1)

Viewed:

40 times

Topic:

In Inventories, silver writes:

Part 92593 (Plate, Modified 1 x 4 with 2 studs) in Coral should
be changed to the newer mold type 41740. The catalog page for 92593 shows
one known appearance.

It is in the early stages of being inventoried. We will make sure it is all correct
before it gets approved.

- Randy

Author:

silver

Posted:

Jan 5, 2019 02:24

Subject:

Pop-Up Party Bus (70828-1)

Viewed:

116 times

Topic:

Status:

Open

Part 92593 (Plate, Modified 1 x 4 with 2 studs) in Coral should
be changed to the newer mold type 41740. The catalog page for 92593 shows
one known appearance.

Author:

StoreToys4Boys

Posted:

Jan 1, 2019 19:18

Subject:

Just add 5000 parts and now they disapear ?

Viewed:

138 times

Topic:

Status:

Open

I just part out 5000 parts and now they disapear.

I just use part out function from a set and it did add all the parts and price
to my inventory.

I just reload my store page to see 308,386 parts but 2 minutes later its back
to 302,722 and all the new part are not there anymore.They are not in stockroom
they are just not there.

Anybody else ever got that problem?

Author:

normivey

Posted:

Dec 30, 2018 23:45

Subject:

Re: Parts not showing on set inventory pages?

Viewed:

30 times

Topic:

Ahhh. So they do. Thanks!

Author:

StormChaser

Posted:

Dec 30, 2018 23:39

Subject:

Re: Parts not showing on set inventory pages?

Viewed:

33 times

Topic:

In Help, normivey writes:

Parts that are identified as being part of a set from the parts page did not show up
in the set's inventory page.

Those parts appear in the inventories of figures. You can click the Break Minifigs
button at the top of an inventory page to have all the figure parts appear along
with the other items in the inventory if desired.

Author:

normivey

Posted:

Dec 30, 2018 23:27

Subject:

Parts not showing on set inventory pages?

Viewed:

60 times

Topic:

Status:

Open

I've come cross a couple of discrepancies with different sets today. Parts
that are identified as being part of a set from the parts page did not show up
in the set's inventory page. Two examples:

The parts page for 15444 Brick, Modified 1 x 1 x 2 with Square Hole indicates
that it is included in set 70808 Super Cycle Chase, but when I look at the inventory
for that set, it's not listed.

The parts page for 15429 Cat Tail indicates that it is included in set 41067,
but it is not listed on the inventory page for that set.

Is this only happening to me, or are others seeing the same discrepancies?

Author:

POPS_BLOCK_SHOP

Posted:

Dec 30, 2018 08:10

Subject:

Re: BrickLink Store Video Update

Viewed:

46 times

Topic:

In Inventories, POPS_BLOCK_SHOP writes:

We are finally growing at a more desired pace! Feel free to follow along for
the ride!

Bricklink Store Overview
https://youtu.be/arFXJncQ7RU

Here is a clip of our original Bricklink store tour about two months ago.

First Store Tour 11/08/2018
https://youtu.be/4fqh_d51ZPs

Author:

POPS_BLOCK_SHOP

Posted:

Dec 29, 2018 20:30

Subject:

BrickLink Store Video Update

Viewed:

103 times

Topic:

Status:

Open

We are finally growing at a more desired pace! Feel free to follow along for
the ride!

Bricklink Store Overview
https://youtu.be/arFXJncQ7RU

Author:

Hygrotus

Posted:

Dec 27, 2018 14:04

Subject:

Re: 3862 - "mixed" parts

Viewed:

23 times

Topic:

In Inventories, agulus writes:

Zycze szczesliwego Nowego Roku

Dziękuję

Happy New Year also!

Author:

agulus

Posted:

Dec 27, 2018 13:10

Subject:

Re: 3862 - "mixed" parts

Viewed:

24 times

Topic:

Got it

Thanks! For me it was first time when I saw
mixed variants in one set.

Zycze szczesliwego Nowego Roku

In Inventories, Hygrotus writes:

In Inventories, agulus writes:

It doesn't matter that I got 2 parts of one variant and 8 of other?

It doesn't matter. It is quite common situation. In our inventory system
alternate variant has always the same quantity, because frequently in set's
copies ratio of part variants can vary, some can have only one variant of part,
some as your copy can have mix of two variants and some copies will have 2, other
3, another 4 etc. of one variant and respectively 8, 7, 6 of other variant, so
we would be overwhelmed by many possible combinations.

Author:

Hygrotus

Posted:

Dec 27, 2018 12:59

Subject:

Re: 3862 - "mixed" parts

Viewed:

33 times

Topic:

In Inventories, agulus writes:

It doesn't matter that I got 2 parts of one variant and 8 of other?

Author:

agulus

Posted:

Dec 27, 2018 12:36

Subject:

Re: 3862 - "mixed" parts

Viewed:

32 times

Topic:

It doesn't matter that I got 2 parts of one variant and 8 of other?

In Inventories, Hygrotus writes:

In Inventories, agulus writes:

I just bought new sealed: [Gear=3862]

and I found out that there were "mixed" 2 types of one part:

2 parts (tan):

4865 Panel 1 x 2 x 1
Parts: Panel

8 parts (tan):

4865b Panel 1 x 2 x 1 with Rounded Corners
Parts: Panel

instead of 10 of one type only.

I think that putting a note for the sellers to be careful
about that "mix" in the Game would be helpful.

Agnes

In this inventory second variant is in the alternate section. This way in the
inventory is showed that in this set both variants can occur. No other notes
is needed.

Author:

Hygrotus

Posted:

Dec 27, 2018 12:20

Subject:

Re: 3862 - "mixed" parts

Viewed:

26 times

Topic:

In Inventories, agulus writes:

I just bought new sealed: [Gear=3862]

and I found out that there were "mixed" 2 types of one part:

2 parts (tan):

4865 Panel 1 x 2 x 1
Parts: Panel

8 parts (tan):

4865b Panel 1 x 2 x 1 with Rounded Corners
Parts: Panel

instead of 10 of one type only.

I think that putting a note for the sellers to be careful
about that "mix" in the Game would be helpful.

Agnes

In this inventory second variant is in the alternate section. This way in the
inventory is showed that in this set both variants can occur. No other notes
is needed.

Author:

agulus

Posted:

Dec 27, 2018 12:16

Subject:

3862 - "mixed" parts

Viewed:

59 times

Topic:

Status:

Open

I just bought new sealed: [Gear=3862]

and I found out that there were "mixed" 2 types of one part:

2 parts (tan):

4865 Panel 1 x 2 x 1
Parts: Panel

8 parts (tan):

4865b Panel 1 x 2 x 1 with Rounded Corners
Parts: Panel

instead of 10 of one type only.

I think that putting a note for the sellers to be careful
about that "mix" in the Game would be helpful.

Agnes

Author:

xxxzanka

Posted:

Dec 20, 2018 17:16

Subject:

Re: 42082 extra items

Viewed:

28 times

Topic:

In Inventories, xxxzanka writes:

In Inventories, Hygrotus writes:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Tile not plate, sorry

Yes you have right it is visible in this review
https://youtu.be/FTrlyFYOoes?t=21m13s

Please consider submiting invetory change request here
https://www.bricklink.com/catalogInvChange.asp?itemType=S

BTW Are you able to check rest of the inventory. Parts count on box is 4057.
Currently in this inventory we have 4056 parts. Is there missing something more?

Sure as soon as i will end all the steps (I have little time for legoing unfortunately)

Set completed: at the end my extra parts list has this differences: no 43093
(axle pin with friction blu); 1x3713 (gray tech bush) instead of 2; 4x3713 (red
tech bush) instead of 5.

Author:

randyf

Posted:

Dec 16, 2018 12:31

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

26 times

Topic:

In Inventories, StormChaser writes:

But, perhaps Marek and Randy can produce some guidelines for us on how extra
sticker sheets should be handled in set inventories considering the positions
we've outlined.

Marek and I can look into this, but it won't be very high priority.

Also, judging by your position, you wouldn't like my guidelines.

Cheers,
Randy

Author:

StormChaser

Posted:

Dec 16, 2018 04:44

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

23 times

Topic:

In Inventories, paulvdb writes:

But the sticker sheets were clearly not intended to be included as extra parts
and don't appear often enough to justify including them as extra parts.

There are two schools of thought on this and good arguments can definitely be
made for both positions. You have presented one side well and I will present
the other side:

1. Frequency of appearance is not currently the deciding factor in the
inclusion of an extra part in a set inventory. Should it be? I don't believe
so. How could you reasonably set a quantity of appearances before an extra is
allowed into an inventory?

2. I've never heard a convincing explanation of why any extra parts
are included in any sets, although I've certainly heard a number of theories.
Extra sticker sheets certainly don't appear to be consistent extras, but
should intentionality on the part of TLG be the deciding factor on including
extras in an inventory? I don't believe so, or at least not until we can
conclusively define (based on convincing evidence) the circumstances regarding
extra parts and their appearance in sets.

3. It is possible that extra sticker sheet extras are more common than
any of us realize, even if only packing errors. If we're not keeping any
records of their appearance in sets, then how would we truly know?

4. Extra sticker sheets fit the definition of extra parts as well as
any other extra part does. They appear in some sets and not in others. Should
we base decisions on extra parts on anything other than the fact that they came
in a set and were extra? I don't believe so.

But, perhaps Marek and Randy can produce some guidelines for us on how extra
sticker sheets should be handled in set inventories considering the positions
we've outlined.

Author:

paulvdb

Posted:

Dec 16, 2018 04:06

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

24 times

Topic:

In Inventories, StormChaser writes:

In Inventories, randyf writes:

It's not unheard of to get a duplicate sticker sheet in a set here or there.
It has happened to me two or three times.

We may have differing opinions on this - not sure because we've never discussed
it. My opinion is that a sticker is a part. We consider it a part and TLG considers
it a part and includes it in the part count.

If you have an extra one of these parts, then I believe it fits the definition
of an extra part and should be included in the set inventory as such:

41351-1 (Inv) Creative Tuning Shop
404 Parts, 2 Minifigures, 2018
Sets: Friends

Were sticker sheets systematically included as extras in some sets in the way
that other parts are? We really don't know, since we haven't been keeping
data on extra appearances. The current inventory guidelines don't address
how frequently an extra must appear in order to be added to the inventory, but
the unwritten rule has been one time.

What are your thoughts?

In my experience extra sticker sheets are caused by packing errors and they are
not systematically included as extras. This is supported by the fact that I've
bought multiples of the same set from the same supplier and found an extra sheet
in only one of the sets.

In my opinion extras should only be extra parts that Lego put in sets for at
least one production run of the set. For example there are some sets that were
first produced before 1x1 plates were included as extras but later production
runs did include them as extras. For those sets I support the inclusion of them
as extra parts.

But the sticker sheets were clearly not intended to be included as extra parts
and don't appear often enough to justify including them as extra parts.

Author:

runner.caller

Posted:

Dec 15, 2018 17:53

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

24 times

Topic:

In Inventories, PortCityTechnic writes:

In Inventories, StormChaser writes:

I too have received an extra sticker sheet a time or two, but never frequently
or consistently. For example, parting out 10 copies of a set, and ending up
with 11 sticker sheets. The extra sticker sheet seems more like a packing error
by TLG, and as such, I don't think I would add them as extras in the set
inventory.

I don't think sticker sheets were ever systematically included as extra parts,
in the way that 1x1 plates, technic pins, and other small parts commonly are.

I agree!

Author:

PortCityTechnic

Posted:

Dec 15, 2018 17:46

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

25 times

Topic:

In Inventories, StormChaser writes:

Author:

StormChaser

Posted:

Dec 15, 2018 15:15

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

32 times

Topic:

In Inventories, randyf writes:

It's not unheard of to get a duplicate sticker sheet in a set here or there.
It has happened to me two or three times.

41351-1 (Inv) Creative Tuning Shop
404 Parts, 2 Minifigures, 2018
Sets: Friends

Author:

runner.caller

Posted:

Dec 15, 2018 12:08

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

28 times

Topic:

In Inventories, randyf writes:

In Inventories, runner.caller writes:

I got 2 sticker sets (75930stk01) in set 75930-1.
Anyone else experience this?

It's not unheard of to get a duplicate sticker sheet in a set here or there.
It has happened to me two or three times. I just consider myself lucky when I
get one!

Cheers,
Randy

Thanks Randy! That's what I was thinking probably happened. Cool!

Author:

randyf

Posted:

Dec 15, 2018 11:45

Subject:

Re: Extra Sticker set in Indoraptor Rampage

Viewed:

32 times

Topic:

In Inventories, runner.caller writes:

I got 2 sticker sets (75930stk01) in set 75930-1.
Anyone else experience this?

It's not unheard of to get a duplicate sticker sheet in a set here or there.
It has happened to me two or three times. I just consider myself lucky when I
get one!

Cheers,
Randy

Author:

runner.caller

Posted:

Dec 15, 2018 11:35

Subject:

Extra Sticker set in Indoraptor Rampage

Viewed:

51 times

Topic:

Status:

Open

I got 2 sticker sets (75930stk01) in set 75930-1.
Anyone else experience this?

Author:

randyf

Posted:

Dec 8, 2018 12:05

Subject:

Re: set 10205 extra parts question

Viewed:

26 times

Topic:

In Catalog, mockingbird writes:

As far as I can see (maybe I overlooked something):

In the regular section of the inventory there are parts that are not used in
the main model (and the instructions or box do not show any secondary model):
1x black brick 1x2
2x black plate 1x1 clip horizontal
2x black slope inverted 75 2x1x3
1x black tile 1x4

But then in the extra parts section of set 10205 are 2x black panel 1x2x3 (2362b).
Shouldn't these two panels also be moved to the regular section?

Or should all these parts be moved to the 'extra' section as the secondary
model is not in the instructions?

You are definitely correct in noticing that there is a problem with this inventory,
so thank you for bringing this to our attention!

The current definition for what constitutes a Regular Item in an inventory on
BrickLink is shown here from https://www.bricklink.com/help.asp?helpID=1562

"Regular Items - All parts required to build the main model and any secondary
models, plus any other items on the official parts list. In the absence of a
parts list, the instructions, box images, and official part count may be used
to determine as closely as possible the constitution of the Regular section."

So let's go down the list...

Are these parts shown in the main model or any secondary models? No, so this
first criteria points to all of these parts as being extras.

Are these parts shown on the official parts list? There is no official parts
list, so this criteria is inconclusive and directly leads us to the last criteria.

Are the parts shown in the instructions? No.
Are the parts shown on the box images? No.
Are the parts included in the official part count? YES!

The box clearly states that there are 234 parts included in the set. Right now,
the BrickLink inventory lists 232 parts. Therefore, the panels in the Extra Items
section should be included in the Regular Items section. The LEGO Replacement
Parts website also confirms that all of the parts you listed as not being used
in the instructions *were* included in the set.

In conclusion, the inventory will be updated to move the panels to the Regular
Items section.

Thank you for contributing to the accuracy of the BrickLink catalog.

Cheers,
Randy

Author:

mockingbird

Posted:

Dec 8, 2018 05:42

Subject:

set 10205 extra parts question

Viewed:

43 times

Topic:

Status:

Open

Author:

xxxzanka

Posted:

Dec 6, 2018 07:03

Subject:

Re: 42082 extra items

Viewed:

29 times

Topic:

In Inventories, Hygrotus writes:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Tile not plate, sorry

Sure as soon as i will end all the steps (I have little time for legoing unfortunately)

Author:

Hygrotus

Posted:

Dec 5, 2018 15:32

Subject:

Re: 42082 extra items

Viewed:

26 times

Topic:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Thank you for finding this. Inventory of this set has been corrected.
https://www.bricklink.com/message.asp?ID=1118448

Author:

Hygrotus

Posted:

Dec 4, 2018 16:04

Subject:

Re: 42082 extra items

Viewed:

40 times

Topic:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Tile not plate, sorry

Author:

xxxzanka

Posted:

Dec 4, 2018 15:56

Subject:

Re: 42082 extra items

Viewed:

28 times

Topic:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Tile not plate, sorry

Author:

xxxzanka

Posted:

Dec 4, 2018 15:53

Subject:

42082 extra items

Viewed:

76 times

Topic:

Status:

Open

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Author:

Stuart9

Posted:

Dec 2, 2018 10:02

Subject:

Just a note for inventory admin

Viewed:

104 times

Topic:

Status:

Open

Total list of differences/confirmations found in my 7586-1

White 92950 x 2 not 3455 x 2
Trans light blue 60581 x 1 not 4215b x 1
Orange 4532 x 2 not 4532a x 2
Trans neon orange 6126b x 1 not 6126 x 1
White 60581 x 1 not 4215b x 1
Bright pink 4589b x 1 not 4589 x 1
Trans orange 4589b x 5 not 4589 x 5
White 3684c x 2 not 3684a x 2
3626c x 1 not 3626b x 1 ( already discussed )
3626c x 2, 3626b x 2 not 3626b x 4 ( already discussed )

Also found what is already listed as alternative :
Light blue grey 4599b x 1
White 60032 x 1

Found :
White 44728 x 1 is the 92411/21712 version

Undetermined item
2453 x 4, mine are 2453a x 4

Hope this is of use, even if it is just to be noted.

Beside the heads there is at least one listed above that doesn't fit existing
listed usage dates.

Happy to provide photo's if required.

Author:

randyf

Posted:

Nov 26, 2018 12:36

Subject:

Re: Inventory for 10764

Viewed:

23 times

Topic:

In Inventories, SurplusParts writes:

Hi there,

I was just wondering what happened with the inventory for 10764, Juniors City
Central Airport.

I bought a couple of them a few weeks ago and I was going to do the inventory
for it. Then I saw that the inventory was pending approval so I pulled the sets
apart and put some in my store and left some aside for another day.

Now it is back to N/A.

Obviously it needs to be inventoried??

Cheers
Douglas

The inventory for this set was in a state of waiting for additional stuff to
be added to it for a number of days/weeks. I believe it was removed to allow
someone else to complete it in a more timely fashion. So, yes, it needs to be
inventoried. Please feel free to reserve it for yourself and start the process
if you would still like to do that.

Cheers,
Randy

Author:

SurplusParts

Posted:

Nov 26, 2018 05:22

Subject:

Inventory for 10764

Viewed:

37 times

Topic:

Status:

Open

Author:

bb327324

Posted:

Nov 12, 2018 14:46

Subject:

Re: Differences between two Winter Toy Shop

Viewed:

34 times

Topic:

Well thanks! I was trying to sift through both inventories but that was going
nowhere fast...

Author:

bb327324

Posted:

Nov 12, 2018 14:13

Subject:

Differences between two Winter Toy Shop

Viewed:

75 times

Topic:

Status:

Open

Hi everyone,

There are two (retired) sets for the Winter Toy Shop set, 10199 and 10249. I
get that one was released in '09 and the other in 2015, and there seems to
be a few bricks more in the second one. But looking at pictures I really can't
seem to pinpoint the differences.

Does anyone know off the top? I just want to know if it's worth the price
difference on the market.
Thanks!

Author:

StarBrick

Posted:

Nov 12, 2018 07:29

Subject:

Re: Metalbeard Parts list

Viewed:

35 times

Topic: