Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | StormChaser | Posted: | Nov 4, 2018 03:59 | Subject: | Re: Set 1636-1 - Small Bucket | Viewed: | 22 times | Topic: | Inventories | |
| In Inventories, Hygrotus writes:
| BTW
Shouldn't this inventory has according to image of parts list
complete assemblies in regular section inventory of these parts?
|
Yes, I would definitely think so.
| also this is connected with this but assembly is not in the catalog
* | | 4180c02 (Inv) Brick, Modified 2 x 4 with Red Wheels FreeStyle and Red Pins (4180 / 4259 / 2344) Parts: Wheel |
with
|
I think it's this one:
Tire currently in inventory of that set don't fit. Nice catch!
|
|
Author: | Hygrotus | Posted: | Nov 4, 2018 03:46 | Subject: | Re: Set 1636-1 - Small Bucket | Viewed: | 26 times | Topic: | Inventories | |
| In Inventories, Hygrotus writes:
BTW
Shouldn't this inventory has according to image of parts list
complete assemblies in regular section inventory of these parts?
also this is connected with this but assembly is not in the catalog
* | | 4180c02 (Inv) Brick, Modified 2 x 4 with Red Wheels FreeStyle and Red Pins (4180 / 4259 / 2344) Parts: Wheel |
with
|
|
|
Author: | StormChaser | Posted: | Nov 4, 2018 03:34 | Subject: | Re: Set 1636-1 - Small Bucket | Viewed: | 33 times | Topic: | Inventories | |
| In Inventories, paolocolombo writes:
| An item is missing in the inventory of set 1636-1:
Dark Gray
Part 6007] Human Tool, Brick Separator
Parts: Accessory, Human Tool: 6007
|
You may request the addition of that item here:
https://www.bricklink.com/catalogInvChange.asp
Marek and Randy, what I noticed with a few of these sets around 1990 is that
there were typically two editions - an early version without the separator and
a later version with the separator. I added an inventory note to at least one
such set:
|
|
Author: | paolocolombo | Posted: | Nov 4, 2018 03:30 | Subject: | Set 1636-1 - Small Bucket | Viewed: | 77 times | Topic: | Inventories | Status: | Open | |
| An item is missing in the inventory of set 1636-1:
Dark Gray
Part 6007] Human Tool, Brick Separator
Parts: Accessory, Human Tool: 6007
|
|
Author: | WoutR | Posted: | Nov 3, 2018 18:24 | Subject: | Re: We have a new Inventories Admin | Viewed: | 49 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| Hello again everybody,
We mentioned last week that we were looking for a new Inventories Admin, and
I'm announcing today that we have appointed Randy (user randyf) to this position.
Randy is a very well-known contributor to the catalog, a frequent participant
in Forum discussions, and pretty much a person we couldn't imagine BrickLink
being without. He has contributed a large number of color-adjusted Lego part
renders which have helped define the look of BrickLink for the next generation.
And his work with PCCs is unmatched.
We are pleased and excited to extend these admin privileges to Randy and to welcome
him to our admin team.
Russell
|
Congratulations to Randy and BrickLink, another great addition to the team of
volunteers!
|
|
Author: | Daudelin | Posted: | Nov 3, 2018 11:24 | Subject: | Re: We have a new Inventories Admin | Viewed: | 44 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| Hello again everybody,
We mentioned last week that we were looking for a new Inventories Admin, and
I'm announcing today that we have appointed Randy (user randyf) to this position.
Randy is a very well-known contributor to the catalog, a frequent participant
in Forum discussions, and pretty much a person we couldn't imagine BrickLink
being without. He has contributed a large number of color-adjusted Lego part
renders which have helped define the look of BrickLink for the next generation.
And his work with PCCs is unmatched.
We are pleased and excited to extend these admin privileges to Randy and to welcome
him to our admin team.
Russell
|
Congrats Randy!
|
Author: | jenwick | Posted: | Nov 3, 2018 08:19 | Subject: | Re: We have a new Inventories Admin | Viewed: | 32 times | Topic: | Inventories | |
| Congrats Randy! |
Author: | elias3 | Posted: | Nov 3, 2018 06:29 | Subject: | Re: We have a new Inventories Admin | Viewed: | 30 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| Hello again everybody,
We mentioned last week that we were looking for a new Inventories Admin, and
I'm announcing today that we have appointed Randy (user randyf) to this position.
Randy is a very well-known contributor to the catalog, a frequent participant
in Forum discussions, and pretty much a person we couldn't imagine BrickLink
being without. He has contributed a large number of color-adjusted Lego part
renders which have helped define the look of BrickLink for the next generation.
And his work with PCCs is unmatched.
We are pleased and excited to extend these admin privileges to Randy and to welcome
him to our admin team.
Russell
|
Congrats Randy!
Stefaan
|
|
Author: | StormChaser | Posted: | Nov 2, 2018 22:53 | Subject: | Re: We have a new Inventories Admin | Viewed: | 60 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| We are pleased and excited to extend these admin privileges to Randy and to welcome
him to our admin team.
|
Yes, welcome to the team, Randy.
Please treat Marek well. I used to frequently smile at him when we directly
worked together - he really likes that. He also like anything in the order Coleoptera,
in case you're wondering about a Christmas gift.
|
|
Author: | SezaR | Posted: | Nov 2, 2018 21:28 | Subject: | Re: We have a new Inventories Admin | Viewed: | 31 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| Hello again everybody,
We mentioned last week that we were looking for a new Inventories Admin, and
I'm announcing today that we have appointed Randy (user randyf) to this position.
Randy is a very well-known contributor to the catalog, a frequent participant
in Forum discussions, and pretty much a person we couldn't imagine BrickLink
being without. He has contributed a large number of color-adjusted Lego part
renders which have helped define the look of BrickLink for the next generation.
And his work with PCCs is unmatched.
We are pleased and excited to extend these admin privileges to Randy and to welcome
him to our admin team.
Russell
|
Congratulations Randy!
|
Author: | Lauren_Luke | Posted: | Nov 2, 2018 21:26 | Subject: | Re: We have a new Inventories Admin | Viewed: | 26 times | Topic: | Inventories | |
| Congratulations! |
Author: | Brickwilbo | Posted: | Nov 2, 2018 21:14 | Subject: | Re: We have a new Inventories Admin | Viewed: | 29 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| Hello again everybody,
We mentioned last week that we were looking for a new Inventories Admin, and
I'm announcing today that we have appointed Randy (user randyf) to this position.
Randy is a very well-known contributor to the catalog, a frequent participant
in Forum discussions, and pretty much a person we couldn't imagine BrickLink
being without. He has contributed a large number of color-adjusted Lego part
renders which have helped define the look of BrickLink for the next generation.
And his work with PCCs is unmatched.
We are pleased and excited to extend these admin privileges to Randy and to welcome
him to our admin team.
Russell
|
Congratulations Randy.
|
|
Author: | leopard37 | Posted: | Nov 2, 2018 21:14 | Subject: | Re: We have a new Inventories Admin | Viewed: | 24 times | Topic: | Inventories | |
| Well done! Good choices all around.
Very nice to see BL stepping up to fill the open role so quickly.
Tyson.
|
Author: | thecueshop | Posted: | Nov 2, 2018 20:40 | Subject: | Re: We have a new Inventories Admin | Viewed: | 36 times | Topic: | Inventories | |
| Congratulations!! |
Author: | jennnifer | Posted: | Nov 2, 2018 19:58 | Subject: | Re: We have a new Inventories Admin | Viewed: | 50 times | Topic: | Inventories | |
| Very, very well deserved! Congrats!
Jen
|
Author: | Admin_Russell | Posted: | Nov 2, 2018 19:51 | Subject: | We have a new Inventories Admin | Viewed: | 212 times | Topic: | Inventories | Status: | Open | |
| Hello again everybody,
We mentioned last week that we were looking for a new Inventories Admin, and
I'm announcing today that we have appointed Randy (user randyf) to this position.
Randy is a very well-known contributor to the catalog, a frequent participant
in Forum discussions, and pretty much a person we couldn't imagine BrickLink
being without. He has contributed a large number of color-adjusted Lego part
renders which have helped define the look of BrickLink for the next generation.
And his work with PCCs is unmatched.
We are pleased and excited to extend these admin privileges to Randy and to welcome
him to our admin team.
Russell
|
|
|
Author: | Golbsbricks | Posted: | Nov 1, 2018 15:08 | Subject: | Re: 32526pb001 Red not an option | Viewed: | 30 times | Topic: | Inventories | |
| In Inventories, qwertyboy writes:
| If there are no sales in the system (and no inventory in sellers' shops),
what would you suggest the price guide should show?
Niek.
|
I would like to see the absence of data simply as zeros, so like any other item,
I can discern how well that part sells. Seeing that this part basically never
sells is more certain information than seeing nothing at all.
The absence of the price guide makes it look like a catalog error.
|
|
Author: | qwertyboy | Posted: | Nov 1, 2018 14:34 | Subject: | Re: 32526pb001 Red not an option | Viewed: | 36 times | Topic: | Inventories | |
| In Inventories, Golbsco writes:
| In Inventories, therobo writes:
| Price guide and images correctly exist for red and green, however red has not
been sold in the last 6 months.
|
I'm not able to view price guide for Red. shouldn't this still exist
despite there being no sales?
|
If there are no sales in the system (and no inventory in sellers' shops),
what would you suggest the price guide should show?
Niek.
|
Author: | Golbsbricks | Posted: | Nov 1, 2018 13:51 | Subject: | Re: 32526pb001 Red not an option | Viewed: | 26 times | Topic: | Inventories | |
| In Inventories, therobo writes:
| Price guide and images correctly exist for red and green, however red has not
been sold in the last 6 months.
|
I'm not able to view price guide for Red. shouldn't this still exist
despite there being no sales?
|
|
Author: | therobo | Posted: | Nov 1, 2018 12:39 | Subject: | Re: 32526pb001 Red not an option | Viewed: | 30 times | Topic: | Inventories | |
| In Inventories, Golbsco writes:
| Firstly, I have no idea how to properly report this stuff. Any direction on how
to do so would be welcomed as I would like to help with reporting these things
when they come up. anywho...
Price guide only appears for green with option for red, however the red variant
shows as an option in the one set it appears in:
Red variant shown in set inventory that gives price guide AND green variant.
I'm not sure if this is a duplicate page issue or the price doesn't
show for pieces that have no sales, which it should imo, because otherwise at
first glance it looks like the piece does not exist in the catalog.
|
Price guide and images correctly exist for red and green, however red has not
been sold in the last 6 months.
|
|
Author: | Golbsbricks | Posted: | Nov 1, 2018 12:22 | Subject: | 32526pb001 Red not an option | Viewed: | 74 times | Topic: | Inventories | Status: | Open | |
| Firstly, I have no idea how to properly report this stuff. Any direction on how
to do so would be welcomed as I would like to help with reporting these things
when they come up. anywho...
Price guide only appears for green with option for red, however the red variant
shows as an option in the one set it appears in:
Red variant shown in set inventory that gives price guide AND green variant.
I'm not sure if this is a duplicate page issue or the price doesn't
show for pieces that have no sales, which it should imo, because otherwise at
first glance it looks like the piece does not exist in the catalog.
|
|
Author: | Admin_Russell | Posted: | Oct 31, 2018 19:07 | Subject: | Re: This item has already been reserved by member | Viewed: | 41 times | Topic: | Inventories | |
| In Inventories, _djm writes:
| In Inventories, Admin_Russell writes:
| In Inventories, StormChaser writes:
| In Inventories, _djm writes:
Yes, I tried to inventory this some time back and got the same message. If I
remember correctly, I reported it as a bug and was told it had been fixed.
|
The bug preventing it from being inventoried is fixed, but reserving the item
still has the bug. The reserve function I believe was part of another bug report
that isn't finished yet.
But yes, it can be inventoried now, when selecting "Gear" as item type.
|
Via the https://www.bricklink.com/catalogInvAddSel.asp page or elsewhere? When
I try that page and click "verify items" button, it shows me the error message
"This Gear has been reserved by and is being worked on by another member".
David
|
No this is yet another bug. I'll report it.
|
|
Author: | Hygrotus | Posted: | Oct 31, 2018 17:45 | Subject: | Re: Set 9395-1 | Viewed: | 18 times | Topic: | Inventories | |
| In Inventories, WhiteVanMan writes:
| So, do you think that the main image has an incorrect coloured part?
Paul
|
I think that this part on photo is LBG but due to lighting conditions could be
overexposured when taking photo. Model is black mainly so camera could had longer
exposure and you could had such effect.
|
|
Author: | WhiteVanMan | Posted: | Oct 31, 2018 17:32 | Subject: | Re: Set 9395-1 | Viewed: | 23 times | Topic: | Inventories | |
| In Inventories, Hygrotus writes:
| In Inventories, WhiteVanMan writes:
| Hi all.
I'm currently adding counterparts to the catalogue for this set
I didn't have the complete set when it arrived at my home, and upon dismantling
, I found that none of the stickered panels and other parts were not in the catalogue,
and so I've started to add them.
I'm stuck on 1 part.
It's the LBG 1x9 lift arms that have a stickered anti-slip tread pattern.
I can see one in the main image as above, and it seems to be on a WHITE 1x9 lift
arm, (underneath the driver's door) but there are no White 1x9 arms listed
within the set's inventory.
Can anyone verify whether this is indeed the case?
Also, if anyone has the whole set, can you let me know how many of the stickers
were applied to the appropriate lift arms and what colour they were, as the sticker
sheet is showing 6 of the anti-slip treads, and there are 5 of the LBG lift arms
within the inventory.
Regards,
Paul
|
Hi stickers must be always applied as instruction shows. If instruction is imprecise
then official photos of model should be check. In this case it easy.
Two stickers with anti-slip tread pattern are applied to LBG 1x9 liftarms.
Instruction book2 pages 20 and 22
https://www.lego.com/biassets/bi/6004021.pdf
Four are applied to four black 1x8 tiles
Instruction book3 pages 13 and 14
https://www.lego.com/biassets/bi/6013913.pdf
|
Thank you so much for that.
The tile is obviously what has stumped me as I have those as well..
I'll be adding that as well too...
So, do you think that the main image has an incorrect coloured part?
Paul
|
|
Author: | Hygrotus | Posted: | Oct 31, 2018 16:37 | Subject: | Re: Set 9395-1 | Viewed: | 20 times | Topic: | Inventories | |
| In Inventories, WhiteVanMan writes:
| Hi all.
I'm currently adding counterparts to the catalogue for this set
I didn't have the complete set when it arrived at my home, and upon dismantling
, I found that none of the stickered panels and other parts were not in the catalogue,
and so I've started to add them.
I'm stuck on 1 part.
It's the LBG 1x9 lift arms that have a stickered anti-slip tread pattern.
I can see one in the main image as above, and it seems to be on a WHITE 1x9 lift
arm, (underneath the driver's door) but there are no White 1x9 arms listed
within the set's inventory.
Can anyone verify whether this is indeed the case?
Also, if anyone has the whole set, can you let me know how many of the stickers
were applied to the appropriate lift arms and what colour they were, as the sticker
sheet is showing 6 of the anti-slip treads, and there are 5 of the LBG lift arms
within the inventory.
Regards,
Paul
|
Hi stickers must be always applied as instruction shows. If instruction is imprecise
then official photos of model should be check. In this case it easy.
Two stickers with anti-slip tread pattern are applied to LBG 1x9 liftarms.
Instruction book2 pages 20 and 22
https://www.lego.com/biassets/bi/6004021.pdf
Four are applied to four black 1x8 tiles
Instruction book3 pages 13 and 14
https://www.lego.com/biassets/bi/6013913.pdf
|
|
Author: | WhiteVanMan | Posted: | Oct 31, 2018 15:56 | Subject: | Set 9395-1 | Viewed: | 40 times | Topic: | Inventories | Status: | Open | |
| Hi all.
I'm currently adding counterparts to the catalogue for this set
I didn't have the complete set when it arrived at my home, and upon dismantling
, I found that none of the stickered panels and other parts were not in the catalogue,
and so I've started to add them.
I'm stuck on 1 part.
It's the LBG 1x9 lift arms that have a stickered anti-slip tread pattern.
I can see one in the main image as above, and it seems to be on a WHITE 1x9 lift
arm, (underneath the driver's door) but there are no White 1x9 arms listed
within the set's inventory.
Can anyone verify whether this is indeed the case?
Also, if anyone has the whole set, can you let me know how many of the stickers
were applied to the appropriate lift arms and what colour they were, as the sticker
sheet is showing 6 of the anti-slip treads, and there are 5 of the LBG lift arms
within the inventory.
Regards,
Paul
|
|
Author: | _djm | Posted: | Oct 29, 2018 03:33 | Subject: | Re: This item has already been reserved by member | Viewed: | 47 times | Topic: | Inventories | |
| In Inventories, Admin_Russell writes:
| In Inventories, StormChaser writes:
| In Inventories, _djm writes:
Yes, I tried to inventory this some time back and got the same message. If I
remember correctly, I reported it as a bug and was told it had been fixed.
|
The bug preventing it from being inventoried is fixed, but reserving the item
still has the bug. The reserve function I believe was part of another bug report
that isn't finished yet.
But yes, it can be inventoried now, when selecting "Gear" as item type.
|
Via the https://www.bricklink.com/catalogInvAddSel.asp page or elsewhere? When
I try that page and click "verify items" button, it shows me the error message
"This Gear has been reserved by and is being worked on by another member".
David
|
|
Author: | Admin_Russell | Posted: | Oct 29, 2018 03:13 | Subject: | Re: This item has already been reserved by member | Viewed: | 48 times | Topic: | Inventories | |
| In Inventories, StormChaser writes:
| In Inventories, _djm writes:
Yes, I tried to inventory this some time back and got the same message. If I
remember correctly, I reported it as a bug and was told it had been fixed.
|
The bug preventing it from being inventoried is fixed, but reserving the item
still has the bug. The reserve function I believe was part of another bug report
that isn't finished yet.
But yes, it can be inventoried now, when selecting "Gear" as item type.
|
|
Author: | StormChaser | Posted: | Oct 29, 2018 02:52 | Subject: | Re: This item has already been reserved by member | Viewed: | 39 times | Topic: | Inventories | |
| In Inventories, _djm writes:
Yes, I tried to inventory this some time back and got the same message. If I
remember correctly, I reported it as a bug and was told it had been fixed.
|
Author: | tEoS | Posted: | Oct 28, 2018 20:50 | Subject: | Re: This item has already been reserved by member | Viewed: | 38 times | Topic: | Inventories | |
| Maybe Gear items need special approval to receive an inventory? Contact the
help desk.
In Inventories, _djm writes:
|
|
Author: | _djm | Posted: | Oct 28, 2018 18:19 | Subject: | This item has already been reserved by member | Viewed: | 146 times | Topic: | Inventories | Status: | Open | |
| I'm trying to add the inventory for I'm trying to do this via
the page https://www.bricklink.com/catalogInvAdd.asp?viewType=G.
When I attempt to reserve it, I get an error message "This item has already been
reserved by member".
However, when I look at the "Items Reserved to be Inventoried" page (https://www.bricklink.com/catalogList.asp?invRes=Y),
it is not list as being reserved.
Given it does not appear to be reserved, can anyone suggest what might be the
issue?
Regards,
David
|
|
Author: | tonnic | Posted: | Oct 20, 2018 13:41 | Subject: | Re: Alternate parts are what they are. | Viewed: | 40 times | Topic: | Inventories | |
| In Inventories, StormChaser writes:
| In Inventories, tonnic writes:
| Thanks already for your quick response!
Ton
|
You're welcome! I work for you, you know.
|
Well, you deserve a raise if I could afford it.
I never had a better employee, to be honest, I never ever had an employee but
otherwise you would be my employee of the month!
|
Minifigure inventories, by the way, can't include alternate parts. Okay,
so here is what I did:
1. Every affected minifigure in both sets now include inventory notes.
2. Both sets now include inventory notes.
3. Both sets now include the other heads as alternates. This is a new approach
which Marek and I are trying out.
This should correct all the issues you raised.
Three of the four possible variants have been confirmed to have appeared, so
the fourth variant (black eyebrows, blocked stud: 3626bpb0628) is the only one
I added without having confirmation that it appeared in the sets. I think the
likelihood that this variant would have appeared in these very popular sets at
some point in their production run was high enough to include it.
|
Thanks for taking care in such a short while!
I will go on putting them in my inventory tomorrow with an extra note and link
to the description.
Have a nice weekend!
|
|
Author: | StormChaser | Posted: | Oct 20, 2018 13:17 | Subject: | Re: Alternate parts are what they are. | Viewed: | 41 times | Topic: | Inventories | |
| In Inventories, tonnic writes:
| Thanks already for your quick response!
Ton
|
You're welcome! I work for you, you know.
Minifigure inventories, by the way, can't include alternate parts. Okay,
so here is what I did:
1. Every affected minifigure in both sets now include inventory notes.
2. Both sets now include inventory notes.
3. Both sets now include the other heads as alternates. This is a new approach
which Marek and I are trying out.
This should correct all the issues you raised.
Three of the four possible variants have been confirmed to have appeared, so
the fourth variant (black eyebrows, blocked stud: 3626bpb0628) is the only one
I added without having confirmation that it appeared in the sets. I think the
likelihood that this variant would have appeared in these very popular sets at
some point in their production run was high enough to include it.
|
|
Author: | tonnic | Posted: | Oct 20, 2018 12:48 | Subject: | Re: Alternate parts are what they are. | Viewed: | 27 times | Topic: | Inventories | |
| In Inventories, StormChaser writes:
| The big problem with E&D sets is that many of them have lengthy production runs,
resulting in all sorts of changes over time. It's not really practical to
create a new catalog entry for every change, so some compromises must be made
between an overstuffed catalog and an overstuffed inventory.
Give me a few minutes while I see what can be done with the inventories of these
two sets to make things better.
|
Thanks already for your quick response!
Ton
|
|
Author: | StormChaser | Posted: | Oct 20, 2018 12:38 | Subject: | Re: Alternate parts are what they are. | Viewed: | 44 times | Topic: | Inventories | |
| The big problem with E&D sets is that many of them have lengthy production runs,
resulting in all sorts of changes over time. It's not really practical to
create a new catalog entry for every change, so some compromises must be made
between an overstuffed catalog and an overstuffed inventory.
Give me a few minutes while I see what can be done with the inventories of these
two sets to make things better.
|
|
Author: | tonnic | Posted: | Oct 20, 2018 12:29 | Subject: | Alternate parts are awful. | Viewed: | 164 times | Topic: | Inventories | Status: | Open | |
| I have 2 Lego education sets, 9348 and 9349.
In both sets the males have head 3626bpb0628 (head with black eyebrows) instead
of 3626bpb0121 (head with brown eyebrows).
In both sets the heads are not even with different eyebrows but also with stud
recessed instead of blocked open stud with triangle.
There is a note below the 22 minifigs of set 9348 regarding the two possible
different heads, not with the set 9349.
Also only a note below the list of 22 minifigs, NOT with the individual minifigs.
Eventhough the minifigs of set 9348 have a note regarding the black instead of
brown eyebrows I think this would not be enough, it does not show on a picture
or with the minifig inventory.
So it is very rudimentary in my opinion.
Although I have the minifigs in hands I do not have the possibility anymore to
upload the right minifigs due to the use of an iPad. Bricklink needs a code below
the minifig and parts, this cannot be done with an iPad.
Bricklink cadmin can make a note below set 9349 like with set 9348 but I think
this is not the real Bricklinkway.
If customers do not read the line below the 22 minifigs they might believe they
received the wrong minifig because inventory does not show the alternate head
and because the note regarding the different heads/eyebrows do not show at the
minifigure itself.
What can be done with this isue due to the lack of a laptop/computer?
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3626bpb0121&idColor=3#T=C&C=3
And
https://www.bricklink.com/v2/search.page?q=3626bpb0121#T=A
https://www.bricklink.com/catalogItemInv.asp?S=9348-1&viewItemType=M
and
https://www.bricklink.com/catalogItemInv.asp?S=9349-1&viewItemType=M
|
|
Author: | Biglesdug | Posted: | Oct 17, 2018 14:23 | Subject: | Re: Clone Turbo Tank Instructions version 7261-1 | Viewed: | 19 times | Topic: | Inventories | |
| In Help, mandr writes:
| It sounds like you now have the instructions you need. I'll just point out
that the 7261-2 uses 8 more of the pins with stop bush than the 7261-1. 4 of
them are accounted for in my previous pictures.
For the remaining ones, from my previous pictures, you could see 2 additional
black pins - these also end up being pins with the stop bush (Page 45 Step 8
to Page 49 Step 17).
Then lastly, Page 55-56, Step 7 to 11 is where the remaining pins with stop bush
are used differently.
I also think that there was a difference in the colour of the 4x4265c Tan versus
Yellow.
|
Thank you mandr for the pictures and helping me out.
I do now have the link to the instructions I am looking for.
|
|
Author: | mandr | Posted: | Oct 17, 2018 14:11 | Subject: | Re: Clone Turbo Tank Instructions version 7261-1 | Viewed: | 14 times | Topic: | Inventories | |
| It sounds like you now have the instructions you need. I'll just point out
that the 7261-2 uses 8 more of the pins with stop bush than the 7261-1. 4 of
them are accounted for in my previous pictures.
For the remaining ones, from my previous pictures, you could see 2 additional
black pins - these also end up being pins with the stop bush (Page 45 Step 8
to Page 49 Step 17).
Then lastly, Page 55-56, Step 7 to 11 is where the remaining pins with stop bush
are used differently.
I also think that there was a difference in the colour of the 4x4265c Tan versus
Yellow.
|
|
Author: | mandr | Posted: | Oct 17, 2018 13:54 | Subject: | Re: Clone Turbo Tank Instructions version 7261-1 | Viewed: | 22 times | Topic: | Inventories | |
| There are a number of places where Black pins are used instead of LBG:
a) Step 5 Page 22: 4 black plus 4 LBG INSTEAD of 8 LBG
b) Step 23 Page 30: 2 black plus 2 LBG INSTEAD of 4 LBG
c) Step 25 Page 32: 2 black plus 2 LBG INSTEAD of 4 LBG
Back to the original question, on Page 46 step 12: The way the two tan connectors
#1 connect to the assembly are different as per the pictures. One uses two black
pins, and the other uses two pins with stop bush. There is another difference
in the pictures, but
I'll look a bit further into it.
|
|
|
Author: | Admin_Russell | Posted: | Oct 17, 2018 13:51 | Subject: | Re: Clone Turbo Tank Instructions version 7261-1 | Viewed: | 34 times | Topic: | Inventories | |
| In Help, Biglesdug writes:
| In Help, mandr writes:
| If you can't find the online instructions, I might be able to help.
Here is the first place where the different pieces are used:
About page 17, Step 16, one set of instructions uses 10 black plus 4 LBG pins
whereas the other set of instructions uses instead 12 LBG pins and 2 black pins
with stop bush. See pictures, and I'll post pictures of the next difference
in a few minutes.
|
THANK YOU! if you don't mind post pictures that would be great!
|
Both versions of instructions are available from Brickset. Here is a list of
redesigned sets with info on where to find instructions:
https://brickset.com/sets/list-18333/page-3
|
|
Author: | Biglesdug | Posted: | Oct 17, 2018 13:44 | Subject: | Re: Clone Turbo Tank Instructions version 7261-1 | Viewed: | 18 times | Topic: | Inventories | |
| In Help, mandr writes:
| If you can't find the online instructions, I might be able to help.
Here is the first place where the different pieces are used:
About page 17, Step 16, one set of instructions uses 10 black plus 4 LBG pins
whereas the other set of instructions uses instead 12 LBG pins and 2 black pins
with stop bush. See pictures, and I'll post pictures of the next difference
in a few minutes.
|
THANK YOU! if you don't mind post pictures that would be great!
|
|
Author: | mandr | Posted: | Oct 17, 2018 13:25 | Subject: | Re: Clone Turbo Tank Instructions version 7261-1 | Viewed: | 21 times | Topic: | Inventories | |
| If you can't find the online instructions, I might be able to help.
Here is the first place where the different pieces are used:
About page 17, Step 16, one set of instructions uses 10 black plus 4 LBG pins
whereas the other set of instructions uses instead 12 LBG pins and 2 black pins
with stop bush. See pictures, and I'll post pictures of the next difference
in a few minutes.
|
|
|
Author: | Biglesdug | Posted: | Oct 17, 2018 12:48 | Subject: | Clone Turbo Tank Instructions version 7261-1 | Viewed: | 68 times | Topic: | Inventories | Status: | Open | |
| I pieced together a clone turbo tank from a lot I bought. I gathered the parts
for the version 7261-1 with the Light up Mace Windu. Now I am trying to build
the set from instructions online and they all have the parts for the non-light
up version (at least from the parts list on here). The instructions even show
the light-up fig but have the parts for the non-light up one.
I am not home so I don't have access to the other parts to switch it over
and I also have the light up fig not the non-light up figure so I would like
to build it for 7261-1.
Can anyone direct me to the instructions or how to use
in place of these?
I'm confused and any help would be appreciated .
|
|
Author: | StormChaser | Posted: | Oct 14, 2018 16:05 | Subject: | Re: set 41068 | Viewed: | 26 times | Topic: | Inventories | |
| In LEGO, Skylar2010 writes:
| Has anyone already submitted those remaining stickered parts for approval ?
i can't seem to do anything with it.
|
I don't believe so, but you can check the list of items pending approval
here:
https://www.bricklink.com/catalogPend.asp
There are hundreds (if not thousands) of stickered counterparts which have not
been added to the catalog.
|
Author: | Skylar2010 | Posted: | Oct 14, 2018 15:58 | Subject: | Re: set 41068 | Viewed: | 22 times | Topic: | Inventories | |
| In LEGO, StormChaser writes:
Has anyone already submitted those remaining stickered parts for approval ?
i can't seem to do anything with it.
|
Author: | StormChaser | Posted: | Oct 13, 2018 21:41 | Subject: | Re: set 41068 | Viewed: | 22 times | Topic: | Inventories | |
| In LEGO, Skylar2010 writes:
| how do you add them to the bricklink catalog I am not sure how to do that?
|
Please see this Help section:
https://www.bricklink.com/help.asp?helpID=71
|
|
Author: | Skylar2010 | Posted: | Oct 13, 2018 21:37 | Subject: | Re: set 41068 | Viewed: | 19 times | Topic: | Inventories | |
| In LEGO, StormChaser writes:
| In LEGO, Skylar2010 writes:
| Hi I've been trying to inventory set 41068 a frozen disney princess lego
set. However, there are several parts that seem to belong to the set that have
stickers I could only find as custom parts not regular parts. But is that correct?
If so how do you select those items to put in your inventory?
|
Those parts are called stickered counterparts. You can find some of them for
this set in the inventory. The others have not yet been added to the catalog.
To add them to your store inventory as official parts you would need to first
add them to the BrickLink catalog. Otherwise, you may sell them as custom items.
|
how do you add them to the bricklink catalog I am not sure how to do that?
|
|
Author: | StormChaser | Posted: | Oct 13, 2018 21:35 | Subject: | Re: set 41068 | Viewed: | 19 times | Topic: | Inventories | |
| In LEGO, Skylar2010 writes:
| Hi I've been trying to inventory set 41068 a frozen disney princess lego
set. However, there are several parts that seem to belong to the set that have
stickers I could only find as custom parts not regular parts. But is that correct?
If so how do you select those items to put in your inventory?
|
Those parts are called stickered counterparts. You can find some of them for
this set in the inventory. The others have not yet been added to the catalog.
To add them to your store inventory as official parts you would need to first
add them to the BrickLink catalog. Otherwise, you may sell them as custom items.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|