BrickLink Discussion Forum

https://www.bricklink.com/message.asp?ID=1100450

In Catalog Inventories, youheardit writes:

I have come across a set that is missing 2 of the counterparts. I have located
them and I want to request for them to be added to the parts inventory for the
set. The two parts are
"45677pb001 Wedge 4 x 4 x 2/3 Triple Curved with Fire Logo Badge and 2 White
Chevrons Pattern (Sticker)"
and
"52031pb003 Wedge 4 x 6 x 2/3 Triple Curved with Fire Logo Badge and 2 White
Chevrons Pattern (Sticker)"

They are both currently showing as counterparts for set 7945 Fire Station. They
are identical to the two same pieces in the set 7208 Fire Station.

Can someone request for these to be added, or let me know how to do it?
Thanks

You mange to do it quite right

Author:

StormChaser

Posted:

Aug 3, 2018 13:24

Subject:

Re: Adding Counterparts for Set 7208

Viewed:

29 times

Topic:

In Catalog Inventories, youheardit writes:

I have come across a set that is missing 2 of the counterparts.

Can someone request for these to be added, or let me know how to do it?

You may add them using an inventory change request:

https://www.bricklink.com/catalogInvChange.asp

Author:

youheardit

Posted:

Aug 3, 2018 10:41

Subject:

Adding Counterparts for Set 7208

Viewed:

40 times

Topic:

Status:

Open

Author:

Sharkman224

Posted:

Aug 2, 2018 16:17

Subject:

Re: Mistake made on parts list for Black Seas Bar

Viewed:

36 times

Topic:

In Catalog Inventories, StormChaser writes:

In Catalog Inventories, Sharkman224 writes:

Hi,
I think the parts list for the Black Seas Baraccuda is wrong.
It says it has 16 of these:
Brown Wheel 8mm D. x 6mm
Can this be fixed?

Yes, it can be fixed. But first we'll need to know what's wrong.

I'm so sorry. I was wrong. I searched the instructions many times and couldnt
find them. Someone just pointed out that they are part of the canons.

Author:

StormChaser

Posted:

Aug 2, 2018 14:45

Subject:

Re: Mistake made on parts list for Black Seas Bar

Viewed:

31 times

Topic:

In Catalog Inventories, Sharkman224 writes:

Hi,
I think the parts list for the Black Seas Baraccuda is wrong.
It says it has 16 of these:
Brown Wheel 8mm D. x 6mm
Can this be fixed?

Yes, it can be fixed. But first we'll need to know what's wrong.

Author:

Brickitty

Posted:

Aug 2, 2018 10:57

Subject:

Re: Mistake made on parts list for Black Seas Bar

Viewed:

34 times

Topic:

In Suggestions, Sharkman224 writes:

Hi,
I think the parts list for the Black Seas Baraccuda is wrong.
It says it has 16 of these:
Brown Wheel 8mm D. x 6mm
Can this be fixed?

Why do you think that's wrong?

It has 4 cannons, and 16 wheels for those 4 cannons. I recently built it myself,
and that was correct for my instructions.

Author:

Sharkman224

Posted:

Aug 2, 2018 10:39

Subject:

Mistake made on parts list for Black Seas Bar

Viewed:

58 times

Topic:

Status:

Open

Hi,
I think the parts list for the Black Seas Baraccuda is wrong.
It says it has 16 of these:
Brown Wheel 8mm D. x 6mm
Can this be fixed?

Author:

leggodtshop

Posted:

Aug 1, 2018 16:31

Subject:

Re: How to add an Alternate to an Inventory?

Viewed:

25 times

Topic:

Today I have issued an add item request for this hinge without hole, as 3149ac01.
If it is accepted I will add an inventory too, with black pivot. The later version,
3149c01, has a hole in the plates to accommodate a string for crane sets. The
first being 337-2 from 1969.

In Catalog Inventories, SezaR writes:

I have three variations of these hinges. They all a hole, but the first two variations
have a smaller hole between the two studs on the first row. See my photo attached.

Do you have another variation coming with a black pivot but without that hole?

In Catalog Inventories, patpendlego writes:

In Catalog Inventories, Admin_Russell writes:

In Catalog Inventories, patpendlego writes:

Hi,

How to add an Alternate part to a Part Inventory?

The help text speaks about a Match ID which has to be filled in, but the form
does not have such a field at all.

I would like to add a Black Pivot to the inventory of 3149c01 as alternate for
the Red one.

https://www.bricklink.com/catalogInvChangeAdd.asp
https://www.bricklink.com/help.asp?helpID=215#submitReq

Looks as if it is not possible to add Alternates?

3149c01 (Inv) Hinge Plate 2 x 4
Parts: Hinge

Alternates are not possible for parts and minifigures.

To do this correctly we need a new part entry, one that has a black pin. I rejected
an entry for one last year because the change to black pin seemed to be very
late and didn't look significant so I just added a note. But if it is important
to you to have black shown as a known color, then submit an entry and I'll
get it approved.

It seems not that important, only because of the Pivot. There aren't much
of these hinges with Black Pivot and I have no knowledge in which sets they occured
so it wouldn't add significant information.

The first of these hinges however had no hole in the plates, and black pivot.
Two differences thus. This might be interesting enough for a new entry. I'll
issue a request for this hinge.

Also. Changing the Note on 3149c01 would be appreciated though. It is wrong.
See my other message earlier.

Author:

Admin_Russell

Posted:

Aug 1, 2018 12:11

Subject:

Re: 40320 pending

Viewed:

48 times

Topic:

In Catalog Inventories, Abels_Bricks writes:

Hi
looking to part out this set 40320 but the item is on hold.

regards
David

40320-1 (Inv) Plants from Plants
29 Parts, 2018
Sets: LEGO Brand: LEGO Brand Store: Supplemental

Author:

Abels_Bricks

Posted:

Aug 1, 2018 10:37

Subject:

40320 pending

Viewed:

85 times

Topic:

Status:

Open

Hi
looking to part out this set 40320 but the item is on hold.

regards
David

Author:

tEoS

Posted:

Jul 28, 2018 15:13

Subject:

Re: Request inventory for Ninjago 70655

Viewed:

33 times

Topic:

FYI: the set hasn't been released in North America yet, so that eliminates
a good portion of members that do inventories.

That is awesome, thanks!

Author:

dakingtm

Posted:

Jul 28, 2018 14:36

Subject:

Re: Request inventory for Ninjago 70655

Viewed:

24 times

Topic:

In Catalog Inventories, StormChaser writes:

In Catalog Inventories, dakingtm writes:

Just wanted to ask if anyone wants to create an inventory for the new Ninjago
70655 Dragon pit?

I thought about doing it myself, but I have never done an inventory, and this
looks to me like quite a daunting set with a lot of new parts and minifigs, plus
stickers and banners and whathaveyou.
So would be great if an experience user can jump on this one.

I will put this on my to-do list. You may expect a completed inventory for this
set within the next two weeks (on or before August 10th).

That is awesome, thanks!

Author:

maggiec

Posted:

Jul 27, 2018 18:00

Subject:

Re: BrickLink's First Ever Inventory

Viewed:

75 times

Topic:

In Catalog Inventories, StormChaser writes:

So what was the very first BrickLink inventory?

The attached photo shows the very first inventory change requests on BrickLink.

Wow. I made the very first.

Author:

MMillere

Posted:

Jul 27, 2018 17:19

Subject:

Re: BrickLink's First Ever Inventory

Viewed:

51 times

Topic:

In Catalog Inventories, randyipp writes:

In Catalog Inventories, StormChaser writes:

So what was the very first BrickLink inventory?

By the way, this unassuming little set had the honor of being the first set ever
inventoried here on BrickLink:

4615-1 (Inv) Red Recon Flyer
20 Parts, 1 Minifigure, 2002
Sets: 4 Juniors: Jack Stone: Airport

Boy that is a nice looking set, can't understand why Lego was struggling
then.

Mainly mismanagement and overproduction..... Most of our stock came from that
era due to Lego and retail store blowouts. Lego 'used' to regularly have
S@H specials at 50% off.....
Man, do I miss those days

Author:

WoutR

Posted:

Jul 27, 2018 15:25

Subject:

Re: BrickLink's First Ever Inventory

Viewed:

65 times

Topic:

In Catalog Inventories, randyipp writes:

In Catalog Inventories, StormChaser writes:

So what was the very first BrickLink inventory?

By the way, this unassuming little set had the honor of being the first set ever
inventoried here on BrickLink:

4615-1 (Inv) Red Recon Flyer
20 Parts, 1 Minifigure, 2002
Sets: 4 Juniors: Jack Stone: Airport

Boy that is a nice looking set, can't understand why Lego was struggling
then.

It is the only set I bought during my dark age

I had a use for that pilot figure. I still have it.

Author:

randyipp

Posted:

Jul 27, 2018 15:01

Subject:

Re: BrickLink's First Ever Inventory

Viewed:

66 times

Topic:

In Catalog Inventories, StormChaser writes:

So what was the very first BrickLink inventory?

By the way, this unassuming little set had the honor of being the first set ever
inventoried here on BrickLink:

4615-1 (Inv) Red Recon Flyer
20 Parts, 1 Minifigure, 2002
Sets: 4 Juniors: Jack Stone: Airport

Boy that is a nice looking set, can't understand why Lego was struggling
then.

Author:

StormChaser

Posted:

Jul 27, 2018 14:56

Subject:

Re: BrickLink's First Ever Inventory

Viewed:

71 times

Topic:

In Catalog Inventories, StormChaser writes:

So what was the very first BrickLink inventory?

The attached photo shows the very first inventory change requests on BrickLink.

Author:

StormChaser

Posted:

Jul 27, 2018 14:45

Subject:

Re: BrickLink's First Ever Inventory

Viewed:

83 times

Topic:

In Catalog Inventories, StormChaser writes:

So what was the very first BrickLink inventory?

By the way, this unassuming little set had the honor of being the first set ever
inventoried here on BrickLink:

4615-1 (Inv) Red Recon Flyer
20 Parts, 1 Minifigure, 2002
Sets: 4 Juniors: Jack Stone: Airport

Author:

StormChaser

Posted:

Jul 27, 2018 14:37

Subject:

BrickLink's First Ever Inventory

Viewed:

198 times

Topic:

Status:

Open

Inventory Item IDs are unique numbers assigned to each item changed or added
in an inventory. The most recent IIID was 854380 (as of this moment), meaning
854,380 inventory actions have occurred during BrickLink's history.

IIIDs can be seen on the left-hand side of any inventory. I have mine set to
show by default, but there's a link at the bottom of each inventory page
where they can be turned on for an individual inventory. These IDs can make
change requests for inventories quicker and easier if used properly.

So what was the very first BrickLink inventory? This somber fellow, on January
22nd, 2003:

Minifig No: gen001 Name: Skeleton - Standard Skull, Floppy Arms

gen001 (Inv) Skeleton - Standard Skull, Floppy Arms
Minifigures: Castle

The IIIDs for this figure are 1, 2, 3, and 4 (photo attached) and the first part
ever added to any inventory was the skeleton torso.

Author:

StormChaser

Posted:

Jul 27, 2018 03:58

Subject:

Re: Request inventory for Ninjago 70655

Viewed:

33 times

Topic:

In Catalog Inventories, dakingtm writes:

I will put this on my to-do list. You may expect a completed inventory for this
set within the next two weeks (on or before August 10th).

Author:

dakingtm

Posted:

Jul 27, 2018 03:53

Subject:

Request inventory for Ninjago 70655

Viewed:

40 times

Topic:

Status:

Open

Hi everyone,

Just wanted to ask if anyone wants to create an inventory for the new Ninjago
70655 Dragon pit?

I thought about doing it myself, but I have never done an inventory, and this
looks to me like quite a daunting set with a lot of new parts and minifigs, plus
stickers and banners and whathaveyou.
So would be great if an experience user can jump on this one.

Thanks in advance,
Matijs

Author:

SezaR

Posted:

Jul 23, 2018 19:43

Subject:

Re: How to add an Alternate to an Inventory?

Viewed:

22 times

Topic:

In Catalog Inventories, Admin_Russell writes:

In Catalog Inventories, patpendlego writes:

3149c01 (Inv) Hinge Plate 2 x 4
Parts: Hinge

Author:

leggodtshop

Posted:

Jul 23, 2018 14:24

Subject:

Re: How to add an Alternate to an Inventory?

Viewed:

27 times

Topic:

In Catalog Inventories, Admin_Russell writes:

In Catalog Inventories, patpendlego writes:

3149c01 (Inv) Hinge Plate 2 x 4
Parts: Hinge

Author:

Admin_Russell

Posted:

Jul 23, 2018 13:29

Subject:

Re: How to add an Alternate to an Inventory?

Viewed:

32 times

Topic:

In Catalog Inventories, patpendlego writes:

3149c01 (Inv) Hinge Plate 2 x 4
Parts: Hinge

Author:

Hygrotus

Posted:

Jul 23, 2018 13:06

Subject:

Re: How to add an Alternate to an Inventory?

Viewed:

17 times

Topic:

In Catalog Inventories, patpendlego writes:

Parts assemblies can't have alternate parts in their inventories, only sets
can. So if you want to add to this part assembly with black povot you must add
completly new parts assembly to the catalog - 3149c02

Marek

Author:

leggodtshop

Posted:

Jul 23, 2018 12:34

Subject:

How to add an Alternate to an Inventory?

Viewed:

36 times

Topic:

Status:

Open

Author:

leggodtshop

Posted:

Jul 23, 2018 11:48

Subject:

3149c01 and black pivot

Viewed:

52 times

Topic:

Status:

Open

Hi,

A note on the following part:

3149c01 (Inv) Hinge Plate 2 x 4
Parts: Hinge

The inventory has the following Note:
Later versions of this part had a black pivot.

However IMO this is incorrect, it's the earlier (!) versions of this part
that had a black pivot.

I have seen many of these hinges, and only the early versions of this hinge had
black pivots, all later versions have red pivot.

I don't know how to change the Note on this item, so maybe one of the Cat
Admins wants to change it? Thank you! Or tell me how to do it

Best regards,
Arnoud van den Bos
Leggodt.nl

Author:

StormChaser

Posted:

Jul 20, 2018 03:49

Subject:

Re: Inventory Addition Request for Set 41314

Viewed:

22 times

Topic:

In Catalog Requests, justwastingtime writes:

41314-1 (Inv) Stephanie's House
609 Parts, 3 Minifigures, 2017
Sets: Friends

I have acquired this set with stickers already applied on the parts for most
of them. There are no counterparts listed for them. Would you like photos or
can you provide the counterpart listings?

You may submit the counterparts to the catalog here:

https://www.bricklink.com/wantedCatalog.asp

Once you've submitted them, please upload photos here:

https://www.bricklink.com/v2/catalog/catalogImageAdd.page

Once the parts have been added to the catalog, please add them to the set inventory
using this form:

https://www.bricklink.com/catalogInvChange.asp

Author:

justwastingtime

Posted:

Jul 19, 2018 22:47

Subject:

Inventory Addition Request for Set 41314

Viewed:

32 times

Topic:

Status:

Open

Friends: 41314 Stephanie's House

I have acquired this set with stickers already applied on the parts for most
of them. There are no counterparts listed for them. Would you like photos or
can you provide the counterpart listings?

Thanks!

Author:

StormChaser

Posted:

Jul 5, 2018 15:25

Subject:

Re: Unikitty collectible minifig problem

Viewed:

40 times

Topic:

In Catalog Inventories, gabri_ves writes:

I'm tryin to add the inventory to the coluni09 minifig, but the page doesn't
show me the 'add item' button. Why?

I'm not sure. The inventory is pending approval, so you should have the
ability to add items to it. Try going here:

https://www.bricklink.com/catalogAdd.asp?utm_content=subnav

Click on your inventories pending approval and then on the "Edit Inv" button.
You should be able to edit from there. Let me know if it's still not working
for you.

Author:

gabri_ves

Posted:

Jul 5, 2018 10:48

Subject:

Unikitty collectible minifig problem

Viewed:

78 times

Topic:

Status:

Open

I'm tryin to add the inventory to the coluni09 minifig, but the page doesn't
show me the 'add item' button. Why?

Author:

Hygrotus

Posted:

Jul 1, 2018 02:30

Subject:

Re: adding decorated part 4346 from set 60135

Viewed:

14 times

Topic:

In Catalog Inventories, Janettoe writes:

Set 60135 has a decorated 4346, with the sticker from the set, which is sticker
set 60135stk01. It is very similar to 4346pb31 and 4346pb34, except this one
has a blue strip on the top of the keypad.

Plese submit it to the catalog.
https://www.bricklink.com/wantedCatalog.asp?catType=P

Author:

Janettoe

Posted:

Jul 1, 2018 00:16

Subject:

adding decorated part 4346 from set 60135

Viewed:

29 times

Topic:

Status:

Open

Set 60135 has a decorated 4346, with the sticker from the set, which is sticker
set 60135stk01. It is very similar to 4346pb31 and 4346pb34, except this one
has a blue strip on the top of the keypad.

Author:

WoutR

Posted:

Jun 27, 2018 14:46

Subject:

Re: Verifying Clickits 7518

Viewed:

29 times

Topic:

In Catalog Inventories, randyf writes:

In Catalog Inventories, WoutR writes:

In Catalog Inventories, axaday writes:

In Catalog Inventories, WoutR writes:
(I do not see why this

is disappointing, it is just the way the set was made)

It is disappointing because I am on a quest to find undetermined pieces. I buy
sets on purpose because the inventory says there are undetermined pieces in there.
But there are never any undetermined pieces in the box.

Isn't that the definition of "undetermined" in our catalog? It might be any
of two (or more) known versions of a part, but we do not know yet which are linked
to this specific inventory.

He is being facetious.

Randy

I guess I am feeling too sick to make sense of that today

Thanks.

Author:

randyf

Posted:

Jun 27, 2018 14:09

Subject:

Re: Verifying Clickits 7518

Viewed:

25 times

Topic:

In Catalog Inventories, WoutR writes:

In Catalog Inventories, axaday writes:

In Catalog Inventories, WoutR writes:
(I do not see why this

is disappointing, it is just the way the set was made)

Isn't that the definition of "undetermined" in our catalog? It might be any
of two (or more) known versions of a part, but we do not know yet which are linked
to this specific inventory.

He is being facetious.

Randy

Author:

WoutR

Posted:

Jun 27, 2018 14:00

Subject:

Re: Verifying Clickits 7518

Viewed:

19 times

Topic:

In Catalog Inventories, axaday writes:

In Catalog Inventories, WoutR writes:
(I do not see why this

is disappointing, it is just the way the set was made)

Isn't that the definition of "undetermined" in our catalog? It might be any
of two (or more) known versions of a part, but we do not know yet which are linked
to this specific inventory.

Author:

axaday

Posted:

Jun 27, 2018 13:37

Subject:

Re: Verifying Clickits 7518

Viewed:

23 times

Topic:

In Catalog Inventories, WoutR writes:
(I do not see why this

is disappointing, it is just the way the set was made)

Author:

WoutR

Posted:

Jun 27, 2018 13:28

Subject:

Re: Verifying Clickits 7518

Viewed:

21 times

Topic:

In Catalog Inventories, StormChaser writes:

I haven't done one of these, but my take on it is that I see little need
to distinguish these frosted/non-frosted variations. Clikits was never that
popular and I believe these parts only came in Clikits sets, so little would
be lost if the A and B part versions were all merged.

If I remember correctly, for at least one of the parts a different color was
used for the frosted- and non-frosted versions. Since BrickLink does not differentiate
between these two LEGO colors, the part version is the only way to distinguish
these in our inventories.

I agree that these parts are unpopular, but I do not feel comfortable saying
that there is not much lost if both versions were all merged.

Author:

WoutR

Posted:

Jun 27, 2018 13:22

Subject:

Re: Verifying Clickits 7518

Viewed:

25 times

Topic:

In Catalog Inventories, axaday writes:

I have

7518-1 (Inv) Cool Room Catchers
111 Parts, 2 Gear, 2003
Sets: Clikits

here and I'm trying to verify and repair the inventory
and I have a question for someone who has done one of these. The inventory said
I would find a lot of undetermined pieces and once again I have been disappointed.
But I have found that several of the lots are mixed between the frosted and
polished versions. Should I say the set has 5 polished versions and 2 frosted
versions like someone carefully made it this way or should I say there are 7
polished ones with 7 frosted ones as an alternate?

I have added the two different versions of those Clikits parts to the catalog.
When the set inventories were made our catalog did not distinguish between those.

I would propose to simply update the inventory to what you find, replacing the
undetermined version with the two versions where needed. (I do not see why this
is disappointing, it is just the way the set was made). If anyone later finds
different quantities then those could always be included as alternatives.

Author:

axaday

Posted:

Jun 27, 2018 10:08

Subject:

Re: Verifying Clickits 7518

Viewed:

27 times

Topic:

In Catalog Inventories, StormChaser writes:

You were only disappointed because you opened the set. If you had kept it sealed
all the parts would have remained undetermined.

I feel like you are victim blaming here.

Author:

StormChaser

Posted:

Jun 26, 2018 22:33

Subject:

Re: Verifying Clickits 7518

Viewed:

27 times

Topic:

In Catalog Inventories, axaday writes:

However, on several of the lots I got all polished or all frosted. Should I
correct those?

Tell you what: just submit requests to correct whatever is wrong with this one
set and we'll discuss Clikits inventories and how they should look once you
submit the requests.

For now, since you don't have more than one copy of the same set, please
submit A as regular and the same quantity of B as alternate for parts that are
mixed. The photo is an example only using one of the undetermined parts from
that set.

For parts which are all the same, then yes, just submit changes as normal.

Author:

axaday

Posted:

Jun 26, 2018 22:22

Subject:

Re: Verifying Clickits 7518

Viewed:

24 times

Topic:

In Catalog Inventories, StormChaser writes:

Most likely I'm not going to do that. I got a good deal on 1 and I will copy
down what I found and if they sell better than I expect them to, I might get
more, but this is likely my only step into Clikits, at least until my daughters
are older. So I will just leave the inventory alone if you wish.

However, on several of the lots I got all polished or all frosted. Should I
correct those?

Author:

maggiec

Posted:

Jun 26, 2018 22:15

Subject:

Re: Verifying Clickits 7518

Viewed:

27 times

Topic:

In Catalog Inventories, StormChaser writes:

However, we cannot know what Maggie's
set showed since the part listings weren't split until just 4 years ago.

Yes. And also yes, inventory was from a sealed set. I believe I parted it out,
but if I find the parts around intact I'll check.

Author:

StormChaser

Posted:

Jun 26, 2018 22:10

Subject:

Re: Verifying Clickits 7518

Viewed:

21 times

Topic:

In Catalog Inventories, StormChaser writes:

In Catalog Inventories, axaday writes:

But I have found that several of the lots are mixed between the frosted and
polished versions. Should I say the set has 5 polished versions and 2 frosted
versions like someone carefully made it this way or should I say there are 7
polished ones with 7 frosted ones as an alternate?

Strictly speaking, though, yes. If the frosted/non-frosted variants are mixed
in sets, then the complete total for each part should be listed in the regular
section (meaning 7 for either the A or B variant) and the alternate section (7
for whatever the other variant is).

Let me correct that a bit. To be completely accurate, you should open several
new sets (say 5 of them) and check to see if the assortment of frosted/polished
parts varies. If it does, then my answer above is correct.

If the inclusion of frosted/polished parts is consistent across all the sets,
however, then the inventory would not have alternates. Instead, it would show
(as in your example) 5 polished and 2 frosted of the same part.

If your sealed set and Maggie's showed different quantities of frosted/polished
parts, then alternates is the way to go. However, we cannot know what Maggie's
set showed since the part listings weren't split until just 4 years ago.

Author:

StormChaser

Posted:

Jun 26, 2018 21:53

Subject:

Re: Verifying Clickits 7518

Viewed:

39 times

Topic:

In Catalog Inventories, axaday writes:

I have

7518-1 (Inv) Cool Room Catchers
111 Parts, 2 Gear, 2003
Sets: Clikits

here and I'm trying to verify and repair the inventory
and I have a question for someone who has done one of these.

The inventory said I would find a lot of undetermined pieces and once again I have been disappointed.

You were only disappointed because you opened the set. If you had kept it sealed
all the parts would have remained undetermined.

Going back to my first point, I don't really want to fill up the Clikits
inventories with alternates. Maggie originally inventoried the set and, although
there is no source listed, I imagine it would have been sealed set contents.

Strictly speaking, though, yes. If the frosted/non-frosted variants are mixed
in sets, then the complete total for each part should be listed in the regular
section (meaning 7 for either the A or B variant) and the alternate section (7
for whatever the other variant is).

Author:

axaday

Posted:

Jun 26, 2018 21:40

Subject:

Verifying Clickits 7518

Viewed:

95 times

Topic:

Status:

Open

I have

7518-1 (Inv) Cool Room Catchers
111 Parts, 2 Gear, 2003
Sets: Clikits

Author:

Hygrotus

Posted:

Jun 25, 2018 11:00

Subject:

Re: Can't found a part

Viewed:

32 times

Topic:

In Catalog Inventories, Tilard writes:

Hello

I'm wondering how to add parts to the BrickLink catalog,
I put in pieces a set 9397 and I can not find the pieces with the sticker
in the catalog, I search with the number of parts and the no. of model that
I have but I can not find any parts with these stickers. If you have the solution
...

Thank you!
Alain

Maybe this description https://www.bricklink.com/message.asp?ID=1085264 how to
add srickered part to the catalog will be helpful for you.

Author:

M_R

Posted:

Jun 25, 2018 10:58

Subject:

Re: Can't found a part

Viewed:

21 times

Topic:

In Catalog Inventories, Tilard writes:

9397-1 (Inv) Logging Truck
1308 Parts, 2012
Sets: Technic: Model: Traffic

Author:

Tilard

Posted:

Jun 25, 2018 10:52

Subject:

Can't found a part

Viewed:

92 times

Topic:

Status:

Open

Author:

Abels_Bricks

Posted:

Jun 24, 2018 08:41

Subject:

Re: Unikitty series 1

Viewed:

29 times

Topic: