BrickLink Discussion Forum

In Suggestions, C0lsanders_ writes:

Same, I see no difference. It's been this way as long I have been selling
(only a few years, but still).

Miles (C0lsanders_)

In Suggestions, Vegitt writes:

In Suggestions, MyTwoPence writes:

Not sure I am liking the new drop down boxes on the Orders page since this morning...

I use a MAC and I find the frames and text are a bit too thin... Can hardly see
them especially when viewing the screen at an angle. Its all a bit of a blur!!
(I always stand next to my partner when picking orders, so am looking from an
angle).

The colours do help a bit. That's a nice touch that has been there for a while
when viewed on the iPhone.

Maybe the text in Bold please!! (pending, paid, shipped, etc... )

... just MyTwoPence Bricks ...

Am I missing something? I don't see any change on the orders page, both placed
and received look the same to me.

Maybe it because it's on a MAC, rather than a PC?

I see no difference, other than the new catalogue display when looking at parts...

Paul

Author:

WhiteVanMan

Posted:

Mar 21, 2017 03:54

Subject:

Re: Counterfiet Set Reporting

Viewed:

88 times

Topic:

This would be a really good time for you to be aware that, in all of my years
of 'playing' with LEGO, I have NEVER found a counterfeit set, with the
LEGO logo present on the studs, or even down to the seals on the packaging.

Yes, there are cases of sets being re-produced by the other CLONE brands (LEPIN),
but even they don't have the LEGO logo on the studs...

Which is why I suspect that you have been mis-led about the YouTube videos of
the box seals etc, purely due to the fact that the LEGO group has so many factories
around the world, all contributing to the production of the LEGO that we all
love.

Yes, there are cases of the slight differences between bricks/parts, which are
either production changes (Modified plates come to mind here), or are actual
quality control issues.

LEGO produced these days are of a slightly lighter/softer feel than those produced
10-40 years ago, again, a change done by the LEGO group, because they changed
the way that the plastic is used within the production of the LEGO parts...

I do believe that the Star Wars set that you have IS a genuine set, but because
you are probably remembering how LEGO had their sets when you were a kid, your
experience is saying that the LEGO you are now handing is 'inferior',
and therefore 'fake', but is actually the genuine article.....

Regards,

Paul

Author:

WhiteVanMan

Posted:

Feb 17, 2017 07:13

Subject:

Re: Ban for shop with fake item for sale

Viewed:

104 times

Topic:

In Suggestions, neghibo writes:

Good day everyone,

I would ask you what do you think about seller that sell fake item on BL, so
if you would agree for prompt suspension for these shop.

Bye

neghibo

If you think you have found one, report it , and Admin will look into it.

Paul

Author:

WhiteVanMan

Posted:

Feb 2, 2017 15:10

Subject:

Re: Orders Placed page - add horizontal lines

Viewed:

17 times

Topic:

In Suggestions, bagelboybugle writes:

In Suggestions, WhiteVanMan writes:

In Suggestions, Teup writes:

In Suggestions, brisbane_qld writes:

It would be very helpful if you could include some horizontal lines (and possibly
an alternating light background shade) on the "Orders Placed" page between the
listed orders so the eye can easily track from the order number on the left to
the Status & Feedback fields to ensure buyers are changing the Status and adding
feedback to the correct order.

I can see each order without any issues.

Maybe you could change the contrast on your computer screen?

Paul

I cant see the difference in colours on mine either, id actually completely forgot
they were ever alternate colours, having a tiny store it isnt an issue for me
either.

But I will say this much, even though this one doesnt affect me, user changing
the computer screen contrast is inconvenient if the user has their monitor set
up to specific settings for a particular reason as it would have to be changed
back every time the other reason comes into play.

I personally dont see any harm in making lines available, even if its on an optional
toggle on/off basis from store settings, that way BL can very easily help users
out with no extra fuss

I'm beginning to think that this issue is actually limited to certain PC's.

I have a HP TouchSmart 300 PC, and the screen is actually a 20inch LCD one...

Colours are bright and are very noticeable...

Maybe having the ability to change the colour bars when on that particular page
will help?

Paul

Author:

WhiteVanMan

Posted:

Feb 2, 2017 08:43

Subject:

Re: Orders Placed page - add horizontal lines

Viewed:

31 times

Topic:

In Suggestions, Teup writes:

In Suggestions, brisbane_qld writes:

Agree. I still don't understand the new BL's love for contrasting white
with extremely light gray. This applies to set inventories, part-outs, etc. as
well. It's hard to enough to sell Lego just having to figure out Light Gray,
Light Bluish Gray, Pearl Light Gray, Flat Silver...!

This tracking from left to right that you describe has become a kind of bottleneck
in my otherwise smoothly automated selling routine. It's a potential cause
for mistakes, it's tedious and there's no reason for it to be that way.

I can see each order without any issues.

Maybe you could change the contrast on your computer screen?

Paul

Author:

WhiteVanMan

Posted:

Jan 31, 2017 13:17

Subject:

Re: Date of parts listed within a store

Viewed:

30 times

Topic:

In Suggestions, SylvainLS writes:

In Suggestions, Rob_and_Shelagh writes:

[…]
I don't agree that a seller should be able to modify a listing date.

Aren’t sellers already able to do that by removing the lot then creating a new
one?

We can, but it takes time, and if I have the sheer amount that I have listed,
then it's a heck of a time consuming thing to do, so it's not feasible.

I do agree that the listing date does not need to be shown on the buyer's
WL data though.

Yes, I don’t see what it could be good for as it adds no information for the
buyer. (The lot may be old but the parts just added, or vice versa.)

Exactly what I am trying to convey, because such a showing of that data does
tend to imply that a part has been 'unsold' within my store since that
date, and I'm not adding more stuff, where in fact I have been.

The data should be updated to show when the listing of the part was 'added
to' with more stock, rather than having new notifications being sent each
time a store's inventory gets 'churned', which doesn't give a
proper level playing field.

(I've not used BrickStock or anything else like it, so for anyone to suggest
that I should do that, doesn't help as it means that more of my time is wasted)

Author:

WhiteVanMan

Posted:

Jan 31, 2017 10:52

Subject:

Re: Date of parts listed within a store

Viewed:

32 times

Topic:

In Suggestions, jenwick writes:

Paul,

I believe that is for your information. I cannot see how long you have had an
item listed.

Jennifer

It's there, believe me.

Go to your wanted list.

select an item.

visit a store that has that item.

and you will see the date that item was 'added' to the store.

Regards,

Paul

Author:

WhiteVanMan

Posted:

Jan 31, 2017 10:40

Subject:

Date of parts listed within a store

Viewed:

110 times

Topic:

Status:

Discarded

Hi.

Is there any real reason WHY the date is shown when an item is listed within
a stores' inventory?

I've kept the option on when I've sold out of an item, it's retained
within my store's inventory, so that when I add more stuff, I know that of
the 2 listings that I have for that particular item (used and new), the USED
listing is always above the new, ensuring that I don't add used stock to
the NEW listing.

I can't understand why this option is there, but it does seem strange, because
when I'd first listed an item within my inventory 4 years ago, and have since
added more of that kind in the years between then and now, but to a Newbie buyer,
it will give the impression that my NEW stock is 4-6 years old, whereas it could
actually be 2 days old!

Can this feature be given the option of being updateable when new stock is actually
added to the retained listing?

Regards,

Paul

Author:

WhiteVanMan

Posted:

Jan 7, 2017 19:07

Subject:

Inventory Change Request for Set 9132-1

Viewed:

13 times

Topic:

Status:

Open

Please make changes to the following inventory:

9132-1 (Inv) Community Transport Set
40 Parts, 9 Minifigures, 2004
Sets: Educational & Dacta: DUPLO: DUPLO, Town: Traffic

* Delete 1 Minifig 47394pb065 Duplo Figure Lego Ville, Male Medic, Orange Legs, Light Bluish Gray Top with Zipper and Stripes, Light Bluish Gray Hair, Light Bluish Gray Hands
* Add 1 Minifig 47394pb125 Duplo Figure Lego Ville, Male Medic, Orange Legs, Light Bluish Gray Top with Zipper, Stripes and EMT Star of Life Pattern, Light Bluish Gray Hair

Comments from Submitter:
As mentioned in this thread
http://www.bricklink.com/messageThread.asp?ID=215081
Main image doesn't show the LBG handed minifig

Author:

WhiteVanMan

Posted:

Jan 7, 2017 19:04

Subject:

Inventory Change Request for Set 9226-1

Viewed:

14 times

Topic:

Status:

Open

Please make changes to the following inventory:

9226-1 (Inv) Hospital
97 Parts, 6 Minifigures, 2 Gear, 2007
Sets: Educational & Dacta: DUPLO: DUPLO, Town: Hospital

* Delete 2 Minifig 47394pb065 Duplo Figure Lego Ville, Male Medic, Orange Legs, Light Bluish Gray Top with Zipper and Stripes, Light Bluish Gray Hair, Light Bluish Gray Hands
* Add 2 Minifig 47394pb125 Duplo Figure Lego Ville, Male Medic, Orange Legs, Light Bluish Gray Top with Zipper, Stripes and EMT Star of Life Pattern, Light Bluish Gray Hair

Comments from Submitter:
As mentioned in this thread
http://www.bricklink.com/messageThread.asp?ID=215081
Main image doesn't show the LBG handed minifigs

Author:

WhiteVanMan

Posted:

Nov 29, 2016 07:00

Subject:

Re: Parting out used sets: stickered parts

Viewed:

35 times

Topic:

In Suggestions, baroness1 writes:

In Suggestions, koozz writes:

Hi,
I do not know if this has been posted before, but here is my question:

I am parting out some nice used sets, some of which have stickered parts. As
one can find, when looking up a particular set in the catalog, these stickered
parts are listed down below under counterparts (or something like that).

Wouldn't it be helpful if these stickered counterparts also appeared in the
(parting out) list when parting out USED sets with stickered parts?

It would make parting out so much easier/quicker and you can easily check if
the stickers are applied correctly.

Like to hear your thoughts!

Tanja

I have also posted about this in the past. It would be great to have the option
of adding the stickered parts when parting out. I agree it would be easier and
much quicker.

I too have said this, but I got brushed off, by the Site's admins claiming
that due to not ALL of the sets will have the stickered counterparts added, it
is easier not to allow this to happen.

But surely, once a set HAS been verified (twice) by the set verifiers, this can
be implemented ONLY for the sets that have ALL of the stickered counterparts?

I would love to have this feature implemented, as I am always parting out used
sets, as I can't always be bothered to try and complete a set that is approx
50% complete.

Regards,

Paul

Author:

WhiteVanMan

Posted:

Oct 19, 2016 03:57

Subject:

Re: Fixing Bricklink

Viewed:

46 times

Topic:

In Suggestions, spwilson13 writes:

Has work stopped on Bricklink updates? I noticed a lot of links don't work
on pages. If you are in messages, and click the community button, nothing happens.
You have to click the Bricklink button on the left to get to the home screen
for fully functionality.

Also a lot of other items don't work like stoplists.

Just tried the one you mentioned.

Messages, and Community...

Working...

Regards,

Paul

Author:

WhiteVanMan

Posted:

Jun 30, 2016 15:55

Subject:

Dates of parts 'added' to a store.

Viewed:

75 times

Topic:

Status:

Open

Vote:

[Yes|No]

Hi all.

When anyone looks in a store, and selects a certain part, there is in small grey
letters, showing the date that particular item was added to the store's inventory,
but as I have selected the option of having the particular item(s) 'retained'
within my inventory after it has been sold out, I would like to have this feature
removed as it makes it look as if a store is not adding any recent stock, which
is not entirely accurate.

Regards,

Paul

Author:

WhiteVanMan

Posted:

Jun 12, 2016 16:29

Subject:

Re: Remember Filter settings

Viewed:

25 times

Topic:

In Suggestions, cgehman writes:

In Suggestions, WoutR writes:

In Suggestions, WhiteVanMan writes:

In Suggestions, randyf writes:

In Suggestions, Brickwilbo writes:

Hi Admin,

Please also create the option to remember 'My Filter settings'.

Thank you.

Yes, again, please!

In fact, most pages with any kinds of dropdowns or settings don't remember
anything.

Randy

If you look at your 'personal' settings, you will see that this had been
disabled, and you will need to adjust it when you are in a seller's shop...

Just be patient!

Paul

http://www.bricklink.com/storeSettings.new.asp

So, now we have to set this in EVERY store? That's insane. There needs
to be some type of default and then maybe override it at the store level.

-Corey

Aw, please, Just be patient!

This was disabled upon the roll-out, and I'm not really bothered, but why
not use the CLASSIC wanted list instead?

Paul

Author:

WhiteVanMan

Posted:

Jun 12, 2016 14:55

Subject:

Re: Remember Filter settings

Viewed:

30 times

Topic:

In Suggestions, randyf writes:

In Suggestions, Brickwilbo writes:

Hi Admin,

Please also create the option to remember 'My Filter settings'.

Thank you.

Yes, again, please!

In fact, most pages with any kinds of dropdowns or settings don't remember
anything.

Randy

If you look at your 'personal' settings, you will see that this had been
disabled, and you will need to adjust it when you are in a seller's shop...

Just be patient!

Paul

Author:

WhiteVanMan

Posted:

Feb 29, 2016 21:01

Subject:

Re: Self-Insurance Disclosure

Viewed:

38 times

Topic:

In Suggestions, ToriHada writes:

I can see your point in this, but please understand that not ALL postal services
are geared the same way as the US's

Here in the UK, we can purchase "Track and Trace" on top of the normal shipping
cost, and this often enables packages/post get delivered the next day.

The size of the UK enables this to happen, and I am aware that the size of the
US doesn't allow for that service to happen.

Am I right in understanding that the US's postal service provides "Tracking"
on postage bought on-line?

Maybe your suggestion would be amended to be that instead of 'insurance',
the Tracking service should be provided instead?

Paul

Hi Paul. Tracking is different and not affected by this suggestion. Nowadays,
almost everything in the USA has tracking. And tracking is being offered on
more international parcels too.

So, to address your concern, this suggestion will not affect your ability to
offer tracking in the UK. That is something completely different.

Thor

Right, so if Tracking is now commonplace for most of the US's packages, is
this an extra cost added to the standard shipping cost?

According to the Royal Mail's website, all of the UK's post is automatically
covered to a maximum cost of £20, and the Tracking service that we can buy will
allow it to be increased to £50 (If I am reading this right)

So, why not do-away with the 'insurance' request, and offer the Tracking
option, as I am sure that European postal services don't offer free tracking,
and that is an extra that we have to pay for.

Besides, how the heck are we in the UK, able to find a 3rd party insurer to cover
a package that might not get lost?

(I've never even thought about finding one for myself as I've used the
Royal Mail's service)

Paul

Author:

WhiteVanMan

Posted:

Feb 29, 2016 20:13

Subject:

Re: Self-Insurance Disclosure

Viewed:

51 times

Topic:

In Suggestions, ToriHada writes:

When a buyer marks the BrickLink check box requesting insurance, please require
that sellers state in their terms and a drop-down box on checkout whether they
purchase that insurance from a reputable 3rd party insurer or provide their own
"self-insurance".

Self-insurance is fine, particularly on smaller orders. But when buyers place
large orders, request and pay extra for insurance, most buyers naturally expect
that insurance to be provided by an actual 3rd party insurance company rather
than the seller. If the seller chooses to self-insure, buyers should at least
know this because it may affect their decision on whether to place an order with
such seller, the size of the order they place and whether they wish to ask the
seller to purchase third party insurance instead (at the buyer's expense).

This has nothing to do with trusting one's seller. It has to do with providing
full disclosure and assurance to buyers that there is sufficient financial backing
and uniform published procedures in place to cover their order if something goes
wrong.

Some buyers won't mind the seller self-insuring. Some buyers prefer that
insurance be provided from an independent professional outside source. Give
this information to buyers and let buyers decide what is best for them.

Thor

Author:

WhiteVanMan

Posted:

Dec 14, 2015 11:56

Subject:

Re: Remove New classification for boxes

Viewed:

38 times

Topic:

In Suggestions, edk writes:

I think what you will need to do is to request that the cat admins have several
levels of box quality available when listing the 'original' box within
someone's inventory.

Maybe this will help to ensure that the correct levels of box quality are being
sold under?

Paul

It is Not a level of quality. It is simply new vs. used. applying your justification
of listing a box as new because of it's quality is the same as listing like
new Used bricks as new.

Let me make it quite clear, right here and now, I have never sold any LEGO that
has been used even once as new, because this is against my ethos.

You didn't even accept the fact my suggestion would do away with the NEW
v's USED debate, as every seller of LEGO understands, there are a few levels
of 'used' when it comes to LEGO, and we all know, chewed, bitten and
yellowed LEGO is not acceptable or even fit enough to be sold as used, except
for use as 'filler' material in building up large landscapes.

My suggestion was this, REMOVE the 'new' listing, and add several levels
of 'used' for the set boxes ONLY.

That way, you will be happy, a few 'original' box sellers will be happy
as they will be able to classify what level of quality their box is in, and the
buyers will be able to judge for them selves.

Regards,

Paul

Author:

WhiteVanMan

Posted:

Dec 14, 2015 11:24

Subject:

Re: Remove New classification for boxes

Viewed:

45 times

Topic:

In Suggestions, edk writes:

I would like to suggest that the NEW classification for empty boxes be removed.
They just do not exist (maybe on an extremely rare occasion) but people still
keep listing them as new. For the people who think they are correct in listing
as new I challenge you to answer this question. What was used to contain the
particular Lego set you parted out ? Hint..... it was the box. It was USED for
a purpose.. Looking at the price guide it seems like people buy the incorrectly
listed as new more often than the honestly listed boxes. I just feel it is an
unfair advantage for those who are misleading with their new designation.

Ed

I can understand your opinion on this matter, however, I have a few boxes that
have been 'used' as you call it, but the quality of them is far superior
than a generally accepted 'used' one would be.

For example, I buy a opened, built, and displayed Atlantis set at my local car
boot sale last year, and while the set is in a good quality condition, the box
has numerous creases from being in the bottom of the pile in the shed/under the
bed/cupboard, I'd call that box as used, because it is NOT in a pristine
condition.

However, I have, in my un-sorted/unlisted/back-up stock, the same set, still
sealed, and so, when I get round to parting it out, I'd open it in a manner
that would ensure that it could be displayed without the obvious signs of being
opened, and yet, the condition of the box is the same as it was when it left
the factory 5 years ago. (still new in my opinion)

I think what you will need to do is to request that the cat admins have several
levels of box quality available when listing the 'original' box within
someone's inventory.

Maybe this will help to ensure that the correct levels of box quality are being
sold under?

Paul

Author:

WhiteVanMan

Posted:

Oct 7, 2015 15:30

Subject:

Re: Inventory Change Request for Set 40190-1

Viewed:

20 times

Topic:

In Inventories Requests, BrickConductor2 writes:

In Inventories Requests, Hygrotus writes:

Please make changes to the following inventory:

40190-1 (Inv) Ferrari F138 polybag
43 Parts, 2014
Sets: Racers: Ferrari

* Add 2 Part 3794 Black Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 2 Part Black 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}

Comments from Submitter:
Found this alternate in Seald Set Contest.

__________________________________________________________________________________________
when has bricklink ever been wrong?

It's not BRICKLINK that has been 'wrong', but it is usually LEGO
swapping parts in production for elements that are slightly different, hence
these requests that people make...

I had to do one the other day for a set that was approx 10 years old.

It's no biggie

Paul

Author:

WhiteVanMan

Posted:

Oct 5, 2015 11:35

Subject:

Re: Inventory Change Request for Set 8640-1

Viewed:

18 times

Topic:

In Inventories Requests, viejos writes:

In Inventories Requests, WhiteVanMan writes:

Please make changes to the following inventory:

8640-1 (Inv) Polar Copter
238 Parts, 1 Minifigure, 1986
Sets: Technic: Arctic Technic

* Add 2 Part 4085b Light Gray Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate)

Comments from Submitter:
Upon Checking this set as I have one on hand, I noted that this particular part was in mine, and not the 'official' BL inventory one.
I checked with BrickSet, and they have confirmed that the clip should be the thin type, however, I checked the instructions and Peeron and they show the type 1's. hence this request as for the others to be included as 'alternate'

Brickset gets its vintage/alternate inventories from Rebrickable, and it is not
clear how Rebrickable populated their inventories. Some of them, anyway, have
been copied straight from BL:

190-1 (Inv) Farm Set
526 Parts, 1975
Sets: Building Set with People: Farm

Peeron on the other hand, is another situation. Many of their inventories are
from excellent sources (and they actually list the source). But there is no log
with a record of changed filed directly with submitters, so in the case of this
set, it's hard to see whether the person who verified the set consciously
changed the variant to the "a" type. Also, there is evidence that some varaint
data was "cleaned up" after the fact (we do that here on BL, too) but without
a change log, it's hard to be sure what is what.

Since this set is on the edge of the line for this part (1986), I would prefer
a straight change. Another consideration is that even in 2015 some members are
having a hard time distinguishing between the types, even with an excellent large
image showing all 4 variants side by side. So confusion of this part at an earlier
date is to be expected.

Speaking of earlier dates, look at the date the inventory was approved (2003),
but 67 lots were added in 2005 (i.e. the whole inventory). Something fishy is
going on here, and it really makes one wonder what the inventory was like for
the previous 2 years. And then the change in 2006 with the Technic pins is another
issue.

Russell

Hi Russell,

I'm surprised as to that you have actually changed the clip totally when
I can see from my instructions, they are supposed to be the Type 1, and yet when
I looked on Brickset they are the Type 2, along with the ones in my set.

This is why I requested the alternate, as like you said, it was on the edge of
the line for the part (type 1).

I think the issue in regard the pins is that the original submitter probably
didn't realise that there were 2 different types...

Wasn't it changed some time ago, the ability to reserve a set for inventorying
purposes to a limit of 3 days before it was re-set?.

I'm sure I can remember several sets being reserved for approx 4 months before
being submitted?

Paul

Author:

WhiteVanMan

Posted:

Oct 5, 2015 09:55

Subject:

Inventory Change Request for Set 8640-1

Viewed:

20 times

Topic:

Status:

Open

Please make changes to the following inventory:

8640-1 (Inv) Polar Copter
238 Parts, 1 Minifigure, 1986
Sets: Technic: Arctic Technic

Author:

WhiteVanMan

Posted:

Aug 29, 2015 17:37

Subject:

Re: My inventory accessability

Viewed:

40 times

Topic:

In Suggestions, WhiteVanMan writes:

I'm not sure if this would be implemented or it can be done already, but
as a seller, I like to add stock to my inventory via the catalogue tab.

When the colour guide comes up, it shows the available parts in the colours,
Wanted lists, Price guide and Known colours, and the ones in my inventory underneath
the first column.

I would like to have 'my inventory' above the 'lots for sale'
section as it will save me having to scroll down every time I want to list a
part that I have 'retained when sold out'

I'm sure alot of sellers would agree with me on this?

Paul

(If these can be swapped already, please show me how!)

Has anyone even seen what I am asking?

Paul

Author:

WhiteVanMan

Posted:

Jul 27, 2015 17:36

Subject:

Re: My inventory accessability

Viewed:

31 times

Topic:

In Suggestions, WhiteVanMan writes:

Bump!

Paul

Author:

WhiteVanMan

Posted:

Jul 26, 2015 13:22

Subject:

My inventory accessability

Viewed:

110 times

Topic:

Status:

Open

Vote:

[Yes|No]

Author:

WhiteVanMan

Posted:

Jul 22, 2015 16:46

Subject:

Re: Add stickered parts to "Part Out" feature

Viewed:

21 times

Topic:

In Suggestions, cptnruthless writes:

Please add the stickered parts to the "part out" feature - or at least an option
to include them. I often part out used sets that are not complete, it's much
easier to do so from the part out page. But I have to manually add each of the
stickered parts, even though they are listed in the inventory alternates in the
catalog.

Thanks,
Ruth

I asked for this at least a year ago, possibly 2 years ago, and I was told that
it would have been too much hard work to do this....

I even put forward the same argument that you have...

Good luck!

Paul

Author:

WhiteVanMan

Posted:

Jul 10, 2015 03:28

Subject:

Re: Stop the Auto Log Out Now!

Viewed:

67 times

Topic:

Off topic of the thread, but did you update the white van?

I did in two aspects....

I upgraded the LEGO Van to a better looking and more streamlined one, and 2 years
ago, I got made redundant from the White Van job, I retrained my self to drive
LGVs, and the firm I work for (K+N), has a contract with Whitbread, who has one
for Costa Coffee, while the 14 tonne Lorries base colour is white, the body colour
is now a Dark Red...

lol

Paul

Author:

WhiteVanMan

Posted:

Jul 9, 2015 15:32

Subject:

Re: Stop the Auto Log Out Now!

Viewed:

66 times

Topic:

In Suggestions, BrickItYourself writes:

In Suggestions, jennnifer writes:

In Suggestions, BrickItYourself writes:

I seem to get logged out every 15-20 minutes or so, sometimes it is completely
random

I do not believe this is normal behavior for the site. I only seem to get logged
out at the evening update or when I log in from another device.

You could always open another window and test that you are logged in before you
hit submit on any page.

Good luck,
Jen

I wonder if it has to do with me being on Satellite Internet and having pings
that might take too long for Bricklink's security features...but I'm
no expert in this.

I don't get logged out for at least an hour, it is likely that your internet
provider is the culprit...

Paul

Author:

WhiteVanMan

Posted:

Mar 27, 2015 19:23

Subject:

Re: Inventory Change Request for Gear 218066

Viewed:

20 times

Topic:

In Inventories Requests, viejos writes:

In Inventories Requests, WhiteVanMan writes:

Please make changes to the following inventory:

218066 (Inv) Knights' Kingdom Das Spiel (Ravensburger - German) with 5 Minifigures
Gear: Game: Castle: Knights Kingdom II

* Add 5 Part 3021 Light Gray Plate 2 x 3

Comments from Submitter:
I have just bought one of these games, and the instructions clearly show that the 2x3 plates are included, 1 for each minifig, for use as a 'stand', hence this request.
There are other elements that will need to be included, as they are the Board, Castle, 2 Dice and 3 rubber bands
Regards,
Paul

As this game was releaed in 2006, I'm thinking the plates should be Light
Bluish Gray instead of Gray.

Russell

Hi Russell.

I can confirm that the plates are actually Light Gray...

Regards,

Paul

Author:

WhiteVanMan

Posted:

Mar 25, 2015 17:58

Subject:

Re: Inventory Change Request for Gear 218066

Viewed:

19 times

Topic:

In Inventories Requests, WhiteVanMan writes:

Please make changes to the following inventory:

218066 (Inv) Knights' Kingdom Das Spiel (Ravensburger - German) with 5 Minifigures
Gear: Game: Castle: Knights Kingdom II

The French version of this game has the 2x3 plates, and the owner of the only
one on BL can confirm that the set has a cardboard Castle, Board, targets, dice
and rubberbands.

Paul

Author:

WhiteVanMan

Posted:

Mar 25, 2015 17:55

Subject:

Inventory Change Request for Gear 218066

Viewed:

31 times

Topic:

Status:

Open

Please make changes to the following inventory:

218066 (Inv) Knights' Kingdom Das Spiel (Ravensburger - German) with 5 Minifigures
Gear: Game: Castle: Knights Kingdom II

Author:

WhiteVanMan

Posted:

Feb 3, 2015 08:18

Subject:

Inventory Change Request for Set 7591-1

Viewed:

34 times

Topic:

Status:

Open

Please make changes to the following inventory:

7591-1 (Inv) Construct-a-Zurg
115 Parts, 1 Minifigure, 2010
Sets: Toy Story

* Delete 1 Part 44375 Dark Purple Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type
* Add 1 Part 44375b Dark Purple Dish 6 x 6 Inverted (Radar) - Solid Studs

Comments from Submitter:
Per the catalogue 'marked for deletion' message I just received in regard to the 6x6 dishes, I do remember my one coming from this set, and it's the one with solid studs.

Author:

WhiteVanMan

Posted:

Jan 30, 2015 17:47

Subject:

Inventory Change Request for Set 70404-1

Viewed:

24 times

Topic:

Status:

Open

Please make changes to the following inventory:

70404-1 (Inv) King's Castle
961 Parts, 7 Minifigures, 2013
Sets: Castle

* Add 2 Part 3794 Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)

Comments from Submitter:
Parted out 2 of these and the Jumper plates were different in one of them, hence this request

Author:

WhiteVanMan

Posted:

Jan 28, 2015 09:30

Subject:

Inventory Change Request for Set 2195-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

2195-1 (Inv) Small Bucket
228 Parts, 1997
Sets: Universal Building Set: Basic Set

* Delete 2 Part 3007 Yellow Brick 2 x 8
* Add 2 Part 3006 Yellow Brick 2 x 10

Comments from Submitter:
I made 1 small mistake when I submitted the inventory, as the 2x8's in yellow should have been 2x10's
regards,
Paul

Author:

WhiteVanMan

Posted:

Jan 8, 2015 19:01

Subject:

Re: Require sellers to pass a test before selling

Viewed:

78 times

Topic:

In Suggestions, Castleguy121 writes:

Keep in mind that the bigger the seller is, then the more mistakes they make.

maybe this is because they get so many large orders due to the high volumes of
'lots' that their stores have.

Sometimes I have a mistake or two within my inventory and I am able to rectify
this by having some of my 'personal' stock available, but if their stores
are run so tightly without any lee-way what so ever, mistakes are likely to happen.

However, it is possible that due to some set's inventories being incorrect
upon being parted-out, some parts are not the correct type or even not available,
that is where some mistakes are made.

The vast majority of us are 'hobby' sellers, who only do this to off-load
the parts that are not needed, and while it is nice to get large orders now and
again, these multi-lot ones are a real bug-bear as they DO take time to fulfil
and these are usually where mistakes can occur.

Regards,

Paul

Author:

WhiteVanMan

Posted:

Jan 8, 2015 17:53

Subject:

Inventory Change Request for Set 3056-1

Viewed:

40 times

Topic:

Status:

Open

Please make changes to the following inventory:

3056-1 (Inv) Go-Kart
18 Parts, 1 Minifigure, 1998
Sets: Town: Classic Town: Race

* Add 1 Part 2447 Trans-Light Blue Minifig, Visor Standard (Extra)

Comments from Submitter:
Just parted out a sealed bag that contained all of the elements from this set with the extra visor part, hence this request

Author:

WhiteVanMan

Posted:

Nov 10, 2014 09:25

Subject:

Re: If you don't mind another......

Viewed:

57 times

Topic:

In Suggestions, Lego_Feats writes:

I think your idea has merit, as there are several sellers who have stop listed
me, and there is one that I'd love to buy several items from, but obviously
I can't.

I have no idea as to why I'd been stop listed, except that I do remember
one stopping me due to the fact that I asked a question, and because of that,
I'd been listed.

Paul

Hmmm

If your in the habit of asking questions I may have to stoplist you too !!!
Outrageous behaviour :p

I know!

Mind you, the item(s) I'd like to buy are not cheap, and a nice order would
be forth coming if I were not stop listed...

Their loss really...

Paul

Author:

WhiteVanMan

Posted:

Nov 10, 2014 09:11

Subject:

Re: If you don't mind another......

Viewed:

62 times

Topic:

In Suggestions, popsicle writes:

I'd like to put forth another suggestion, on this fine Saturday morning,
before we head out for the day.

I feel just as strongly about this issue, as I do with my previous suggestion.

When a member takes the decision to place another member on their stoplist, that
an option is offered during the process of stoplisting. Perhaps a check-box to
tic-off if you would like to keep the lines of communication, open.

This would be at the discretion of the member doing the stoplisting.

Maybe two levels of stoplisting; one without contact (more severe), or a less
severe level, allowing contact.

I would further suggest that the option be left open as long as the member is
on the stoplist. Allowing the stoplisting member to open-up comms, or close if
desired.

-Cory

Author:

WhiteVanMan

Posted:

Nov 6, 2014 19:56

Subject:

Re: Add picture of set contents

Viewed:

36 times

Topic:

In Suggestions, Qzaks writes:

On the catalog entry, there are currently 3 pictures:
1. Image of Instructions
2. Set No: / Name:
3. Image of Original box (or polybag)

I would suggest adding a picture (or 2) of the contents of the set so you can
see all of the bags and loose large parts that would be included.

Should be really helpful for those who have open sets and they want to see if
all of the contents are there.

I have voted no, because this will make the catalogue more slow to load and having
to include the picture will NOT make things easier for sellers.

The set's inventory is used as a guide to determine if a used set is complete
or not, not a picture, as the picture will not be able to show ALL of the pieces
in full detail.

I'm guessing that you have several unsealed sets, and would like to determine
if the number of bags is correct?

I did try and implement a feature of where the number of bags could be included
within the listing in the catalogue, but it was turned down due to the "fact"
that the official number of bags does change when sets are packaged for each
market region.

Regards,

Paul

Author:

WhiteVanMan

Posted:

May 1, 2014 20:02

Subject:

Re: Inventory Change Request for Set Loc391404-1

Viewed:

14 times

Topic:

In Inventories Requests, hazelsden writes:

In Inventories Requests, WhiteVanMan writes:

Please make changes to the following inventory:

LOC391404-1 (Inv) Worriz foil pack #1
12 Parts, 1 Minifigure, 2014
Sets: LEGENDS OF CHIMA

* Delete 1 Part 11233 Light Bluish Gray Minifig, Headgear Mask Wolf, Plain (Extra)

Comments from Submitter:
I have checked 6 of these sets, (by weighing them, using a digital scale that reads to 1000x0.01g) and none have this extra part, which leads me to conclude that the original inventory submission is wrong.
However, my sets came from the UK's version of May issue Legends of Chima comic, which is possible that the inventory has changed.

Hi Paul,

The submitter of the inventory assured me that he did indeed have an extra mask,
and extras are just that - extras. They are not part of the regular inventory
and some sets may have them and other sets not. Extras are just that and they
may or may not be included in a set, and quantity of extras may vary from set
top set.

Hazel
Inv. Admin

Hi Hazel,

I did find it strange that this extra part was found in this set, as I have found
that of all of the Chima sets that have been on the comic, no extra parts have
been found, including the ones that I have inventoried. (which is why I included
the additional 'comment' in my original post.)

Regards,

Paul

Author:

WhiteVanMan

Posted:

Apr 29, 2014 08:17

Subject:

Inventory Change Request for Set Loc391404-1

Viewed:

26 times

Topic:

Status:

Open

Please make changes to the following inventory:

LOC391404-1 (Inv) Worriz foil pack #1
12 Parts, 1 Minifigure, 2014
Sets: LEGENDS OF CHIMA

Author:

WhiteVanMan

Posted:

Mar 29, 2014 18:15

Subject:

Re: Rejected Catalog Submissions

Viewed:

46 times

Topic:

In Suggestions, jennnifer writes:

I have seen some of the images that you have submitted of stickered parts, and
there has been no real improvement on the ones that are already in use.

Ouch! I guess I opened myself up to criticism by making this suggestion. I believe
the relative value of my image submissions is not really relevant here. Just
trying to make things better if possible.

Thanks,
Jen

I agree with what you are saying, but my response was not intended as a criticism,
but as a pointing-out of that some images have no real need to be improved upon.

I have noted that there some images that have been taken straight from the box
image/instructions and from LDD which are not quite up to the standard that a
'proper' camera image can be, and I'm all for it to have those replaced.

Like I did mention, maybe you could focus on those parts that have no image,
and these can be found within the catalogue section.

I've done several this way myself, but I just can't get the images reduced
to be used as a small one..

Regards,

Paul

Author:

WhiteVanMan

Posted:

Mar 29, 2014 10:08

Subject:

Re: Rejected Catalog Submissions

Viewed:

42 times

Topic:

In Suggestions, jennnifer writes:

I suggest that every time a Catalog submission, Inventory Change Request, Image
upload or similar action is rejected by the admins, that a message must be sent
to the submitter to explain why. It is disheartening to take the time to add
something you believe is valuable to the site, and then have it just disappear.
Everyone deserves the courtesy of a reason and response. How else can corrections
be made?

Thank you,
Jen

I have seen some of the images that you have submitted of stickered parts, and
there has been no real improvement on the ones that are already in use.

Maybe you could focus on the ones that have no image available, or are so blurry
that they are not exactly clear enough.

But, hey, I have submitted several images and they got refused, which has not
been an issue, however, I agree with your request, and I have voted yes.

Regards,

Paul

Author:

WhiteVanMan

Posted:

Feb 7, 2014 07:52

Subject:

Re: Refine inventory/reservation process in BL 2

Viewed:

41 times

Topic:

In Suggestions, enig writes:

Maybe one should also be only able to reserve the set if he/she had at least
10 inventory corrections submitted, meaning that they actually know what they're
doing.

I agree, as I have found that there are quite a few sets that need to be done
and yet they don't..
I found a set that it's inventory had been submitted but the submitter had
put in this style of Technic pin in instead of the other...

4459 Technic, Pin with Long Friction Ridges
Parts: Technic, Pin

2780 Technic, Pin with Short Friction Ridges
Parts: Technic, Pin

So, I had to drop a line to the submitter explaining what had happened and it's
been rectified. (Yay!)

Author:

WhiteVanMan

Posted:

Dec 16, 2013 02:56

Subject:

Re: Sort Your Inventory By Part # Or Color?

Viewed:

47 times

Topic:

In Suggestions, BinOfBlocks.Com writes:

Some of you that have stores, have you found it better to sort your inventory
by the part # or by color?

Just a friendly piece of advice, the suggestions section of the Forum is for
the CATALOGUE or for IDEAS that buyers and sellers feel that would improve the
whole experience that BrickLink offers.

Your question is best aimed at the 'HELP' section of the forum's
listing of topics.

However, I have my store's inventory sorted by BrickLink's catalogue
as when an order gets placed, I can pull the parts as I scroll down the list.

(You can change the settings of how an order looks when it gets placed within
you own store)

Hope this helps,

Paul

Author:

WhiteVanMan

Posted:

Dec 6, 2013 07:57

Subject:

Re: mega blocks, kre-o, best lock etc.

Viewed:

69 times

Topic:

In Suggestions, Prismiad writes:

I would like to see some other brands of bricks available on the site, obviously
they would have to have a seperate category because no one wants a mega block
when they thought they were getting lego. Lego is obviously the best but the
other brands have certain parts that are very useful, wheels and weapons being
the best examples.

I'm sorry, but this is a web site designed primarily for the sale of products
and items designed by the LEGO company.

Although there are other 'custom' designed items for sale here, they
are CUSTOM designed and not products designed/made/released by a main stream
seller/company, ie Kre-o and others

So your 'suggestion' is going to be voted NO, and NO again by approx
99% of the buyers and sellers on this site.

Why not join the Mega-blok web site?

Regards,

Paul

Author:

WhiteVanMan

Posted:

Aug 29, 2013 17:49

Subject:

Re: Site suggestion

Viewed:

41 times

Topic:

In Suggestions, frog4gators writes:

Is there anyway possible to save your "cart" so the items will remain in the
cart from computer to computer (login). Or if you have a glitch in your internet
and have to reboot it?

I've lost countless hours having to search through everything I wanted again.

Not all stores have Hold Order Open options.

Thanks

There is no possible method to keep items in your cart while you are 'shopping'
within a store other than keeping several 'tabs' open and each time you
get logged out, just log back in using a different tab.

(never the one that you have your cart open within a store)

I have set up my wanted list containing the elements that I want and when I browse
a store, I then look at others, using a different tab for each store.

Hope this helps.

Paul

Author:

WhiteVanMan

Posted:

Jan 28, 2013 10:37

Subject:

Re: REAL photos near the sets for sale:

Viewed:

62 times

Topic:

If a seller is unwilling to send me a quick picture, then I am unwilling to send
them money. Simple as that! There are many sellers who will take the time to
send you a picture.

-Ruth

Hang-on.....

Maybe this is the case for some sellers....

I once had a lengthy discussion/negotiation with a potential buyer over a set,
and even after supplying the pictures (my time) I didn't sell the set.

So, maybe it's that factor of time being involved with a potential sale and it
falling through puts people off from supplying their own pictures etc etc

No worries or issues with me as I rarely sell sets. (all of the used ones I have
are dismantled anyway)

Paul

Author:

WhiteVanMan

Posted:

Jan 24, 2013 13:50

Subject:

Re: condition codes?

Viewed:

51 times

Topic:

In Suggestions, gfones writes:

Suggestion to add codes to the condition column that indicate:

A. Unused mint (No damage and unused)
B. Unused not mint (Rubbing in bag, etc.) Seller is required to add description
of damage in item description and can only be combined with items described with
the same damage.
C. Used Near mint (Used but no damage)
D. Used Damaged, seller is required to add description of damage in item description
and can only be combined with items described with the same damage. Additional
idea the seller also has to provide a non-stock picture of time?

I'm sorry, but I'm guesing that you have had a few elements that were sold to
you as new, but, in your opinion were used.

However, please bear in mind that this possible scenario can happen, and I'm
not saying that it will with all of the major sellers.

Over time, parting out sets will build up one's stock, and there are cases of
where even I have seen the quality differences between a set's elements from
5 years ago and today.

My example is this:-

A seller has parted out 10 identical sets that contains 4 1x1 Blue Bricks upon
his start up of his store on BrickLink.
The seller parts out more different sets over the years and occasionally, 1x1
Bricks in blue are added to the stock, but don't get sold.
6 years go by and NONE of those 1x1's have sold because no-one wants them...
Seller reduces the price, and boom, they get sold.
Because of HOW these 1x1's were stored, the orignal ones have signs of 'use'
even though they are classed as new because they didn't get used.
Buyer complains that the 1x1's have small 'micro-scratches' even though they
got taken from MISB sets
Seller responds by say that they are NEW...
Buyer retorts saying that they are not becuase of the scratches...
Negatives get placed etc etc

Now, I use my storage system like how BrickLink's parts catalogue is set up...

I use multi drawer cabinets and each drawer is allocated a certain element(s)

I snap together all of my USED Lego as it is easier to count that way as I can't
part out 2x4 plates as well as 2x4 Bricks, and obviously small parts like Technic
pins are bagged.

All of my NEW is kept separate, again in drawers, lined with paper to stop surface
rubbing, again with certain elements in per drawer.

It is inevitable that some elements WILL get rub marks and this is ACCEPTED by
the mainstream BL community

Even BL states that elements taken from a MISB set may have rub marks and the
parts are still classed as new.

Hope you can understand what I have said.

Paul

Author:

WhiteVanMan

Posted:

Dec 20, 2012 06:32

Subject:

Re: Hidden fees - It's a loose-loose game

Viewed:

56 times

Topic: