| Change Description | By |
| Part 4923pb01 Minifigure Armor Shoulder Pads and Wrap with Molded Pearl Gold Rivets and Scabbard for 2 Katanas Pattern: | axaday (7302) |
|
| Part 5320 Minifigure, Headgear Slouch Hat, Dwarf / Gnome with Tip Facing Backwards, Creases at Front and Back: | axaday (7302) |
|
| Part 4923pb01 Minifigure Armor Shoulder Pads and Wrap with Molded Pearl Gold Rivets and Scabbard for 2 Katanas Pattern: | axaday (7302) |
|
| Part 970c00pb1601 Hips and Legs with Orange Sash and Toes, Sand Blue Hems and Red Knee Wrapping Pattern: | axaday (7302) |
|
| Part 970c00pb1604 Hips and Legs with Medium Azure Sash, Dark Bluish Gray Harness and Knee Straps and Silver Trim Pattern: | axaday (7302) |
|
| Part 970c00pb1605 Hips and Legs with Lime Sash, Dark Green Harness and Knee Straps and Silver Trim Pattern: | axaday (7302) |
|
| Part 970c00pb1602 Hips and Legs with Bright Light Yellow Sash, Dark Bluish Gray Harness and Knee Straps and Silver Trim Pattern: | axaday (7302) |
|
| Part 970c00pb1600 Hips and Legs with Bright Light Orange Sash, Dark Bluish Gray Harness, Dark Red Knee Straps and Silver Trim Pattern: | axaday (7302) |
|
| Part 970c00pb1606 Hips and Legs with Bright Light Orange Sash, Dark Bluish Gray Harness and Knee Straps and Silver Trim Pattern: | axaday (7302) |
|
| Part 4924pb01 Minifigure, Weapon Sword with Molded Trans-Red Pommel, Jewel in Hilt, and Trailing Edge Pattern: | axaday (7302) |
|
| Part 5496 Dragon Head (Ninjago) Jaw Lower with Teeth and 10 Studs: | axaday (7302) |
|
| Part 5404 Slope 18 2 x 1 x 2/3: | TakeAbricK (13471)  |
|
| Part 5091 Tile, Modified 1 x 2 Wedge Left: | TakeAbricK (13471) |
|
| Part 5092 Tile, Modified 1 x 2 Wedge Right: | TakeAbricK (13471) |
|
| Part 731c09 Technic, Shock Absorber 6.5L with Pearl Gold Piston Rod - Soft Spring, Tight Coils: | TakeAbricK (13471) |
|
| Part 5310 Large Figure Weapon Sickle with Axle and Axle Hole: | TakeAbricK (13471) |
|
| Part 45705 Windscreen 10 x 6 x 2 Curved: | TakeAbricK (13471) |
|
| Part 86148 Wedge 4 x 4 Angular Stepped Top: | TakeAbricK (13471) |
|
| Part 56908 Wheel 43.2mm D. x 26mm Technic Racing Small, 6 Pin Holes: | TakeAbricK (13471) |
|
| Part 56908 Wheel 43.2mm D. x 26mm Technic Racing Small, 6 Pin Holes: | TakeAbricK (13471) |
|
| Part 22385 Tile, Modified 2 x 3 Pentagonal: | TakeAbricK (13471) |
|
| Part 3167 Technic, Liftarm, Modified U-Shape Thick 2 x 3 Perpendicular: | TakeAbricK (13471) |
|
| Part 41812 Projectile Launcher, 4 x 2 x 1 with Bottom Axle (For 1 x 1 Round Tiles): | TakeAbricK (13471) |
|
| Part 93274 Bracket 1 x 2 - 2 x 4: | TakeAbricK (13471) |
|
| Part 5090 Bracket 1 x 6 - 2 x 6 Inverted with 1 x 4 Cutout: | TakeAbricK (13471) |
|
| Part 4865b Panel 1 x 2 x 1 with Rounded Corners: | TakeAbricK (13471) |
|
| Part 6231 Panel 1 x 1 x 1 Corner: | TakeAbricK (13471) |
|
| Part 20482 Tile, Round 1 x 1 with Bar and Pin Holder: | TakeAbricK (13471) |
|
| Part 28598 Cone 2 x 2 x 3 Jagged - Step Drill: | TakeAbricK (13471) |
|
| Part 98224 Duplo, Brick 2 x 4 Slope Curved Inverted Double: | TakeAbricK (13471) |
|
| Part 11197 Duplo, Brick 2 x 6 x 2 Slope Curved Double with 2 x 2 Cutout on Bottom: | TakeAbricK (13471) |
|
| Part 15515 Duplo, Brick Round 4 x 4 Flat Top Scalloped with 2 x 2 Studs: | TakeAbricK (13471) |
|
| Part 15515 Duplo, Brick Round 4 x 4 Flat Top Scalloped with 2 x 2 Studs: | TakeAbricK (13471) |
|
| Part 1748 Tile, Round 1 x 2 Half: | TakeAbricK (13471) |
|
| Part 66789 Plate, Modified 6 x 6 with Rounded Corners and 4 Feet: | TakeAbricK (13471) |
|
| Part 66790 Plate, Modified 8 x 8 with Rounded Corners and 4 Feet: | TakeAbricK (13471) |
|
| Part 1750 Slope, Curved 2 x 2 Inverted: | TakeAbricK (13471) |
|
| Part 86876 Brick, Modified 1 x 2 with Stud on Side: | TakeAbricK (13471) |
|
| Part 4412 Cylinder Hemisphere 5 x 5, Axle Hole in Center and 2 Pin Holes: | TakeAbricK (13471) |
|
| Part 15458 Technic, Panel Plate 3 x 11 x 1: | TakeAbricK (13471) |
|
| Part 40490 Technic, Liftarm Thick 1 x 9: | TakeAbricK (13471) |
|
| Part 67491 Technic, Liftarm, Modified Frame Thick 3 x 19 Open Center: | TakeAbricK (13471) |
|
| Part 71710 Technic, Liftarm, Modified Perpendicular Holes Thick 1 x 15: | TakeAbricK (13471) |
|
| Part 61480 Tire 68.7 x 34 R: | TakeAbricK (13471) |
|
| Part 3757 Minifigure, Weapon Crescent Blade: | TakeAbricK (13471) |
|
| Part 32202 Hose, Soft Axle 16L: | TakeAbricK (13471) |
|
| Part 5426 Technic, Panel Curved #53 3 x 13 Tapered Right: | TakeAbricK (13471) |
|
| Part 4527 Technic, Panel Curved #52 3 x 13 Tapered Left: | TakeAbricK (13471) |
|
