Change Item Name from {Homemaker Figure / Maxifigure Headgear Hair Short} to {Hair WITH Side studs}
Note: Hi. there are 2 different versions of this part: one hasn't side studs, one version HAS side studs to attach headgear - see Set 215-1. Sam issue for x196. Both parts should have own dual parts listings for each version.
Change Packing Dimensions from {0.64 x 0.48 x 13.68} to {0.64 x 12.8 x 0.5}
Note: Part 39759 is significantly shorter than the older type 30104 (0.64 x 13.68 x 0.48). Part 30104 should be separated and the new types given as a separate item too. 39759 is matte, but 30104 is shiny. Production ended in 2006 with black color.
Change Item Name from {Maine Space Grant Consortium Promotional Astronaut Polybag} to {Pin, Astronaut, Maine Space Grant Consortium} Change Category from {Town: Space Port} to {Patch & Pin: Space: Space Port}
Note: I posted about this in the forum some time ago and got denied (mostly due to my poor explanation lol), but I know for a fact this is a pin, fastened to a slit in the card. I have some of them, and the pin on the back of the minifigure is exactly like on [g=pin012].
https://www.bricklink.com/messageThread.asp?ID=285677
Change Item Name from {Brick, Modified Facet 3 x 3 x 2 Top} to {Wedge 3 x 3 x 2 Facet Top (Slope Corner)} Change Category from {Brick, Modified} to {Wedge}
Note: It was relased the same year as set 1029, both the set and the mug was available to order trough a cataloge called "Bli Tryggere i Traffiken" a collaboration between Lego, Tine and Trygg Trafikk. The cataloge was given out to kids at the school. But Lego also had advertisments on Tine's Milk cartongs the same year.
Change Part Color Code 1 for Orange Color to {6014005}
Note: 93789 is not the design number for the flat end variant. 93789 is another one of those unique Chinese factory design numbers that only appears in special sets. the flat end variant should be 4497b. All 93789 PCCs belong under the 4497 entry. the modern spear variant doesn’t appear to have a design number of its own, so it’ll likely share a few element numbers with its predecessor.
Change Item Name from {Sticker Sheet for Set 2000421 - (15607/6051881)} to {Sticker Sheet for FIRST LEGO League Trophy - (15607/6051881)} Change Item No from {2000421stk01} to {FLLstk01}
Note: This sticker is the same for the 3 size trophies. After that it can be added to the other 2 inventories.
Change Item Name from {Support 31 x 13 Girder, Trapezoid with Orange and White Danger Stripes Pattern (Sticker) - Set 4210} to {Technic, Liftarm, Modified Girder Thick 31 x 13, Trapezoid with Orange and White Danger Stripes Pattern (Sticker) - Set 4210} Change Category from {Support} to {Technic, Liftarm, Decorated}
Change Item Name from {Support 31 x 13 Girder, Trapezoid} to {Technic, Liftarm, Modified Girder Thick 31 x 13, Trapezoid} Change Category from {Support} to {Technic, Liftarm}
Change Item Name from {Support 11 x 11 Girder, Round} to {Technic, Liftarm, Modified Girder Thick 11 x 11, Round Open Center} Change Category from {Support} to {Technic, Liftarm}
Note: Sorry, the other first name change should be 15 x 15!!!
Change Item Name from {Support 15 x 15 Girder, Round} to {Technic, Liftarm, Modified Girder Thick 11 x 11, Round Open Center} Change Category from {Support} to {Technic, Liftarm}
Note: This and the other 3 have no studs like the other supports, they are more similar to other Liftarm, modified.
Note: this item uses ID 44798 and is under "Not Aproved New Elements" with the name "YELLOW LEGO STRORAGE BOX #9920"(the database is full of typos) - element number 4183146
are these IDs even necessary? alternates?
Note: Going back and removing any IDs associated with loose parts. This piece should be an assembly. I’m not sure where you guys are getting some of these other IDs, but this might also be worth looking for, if possible. These should all be deleted. Part number might also have to be changed. Same applies to 6789.
Change Part Color Code 1 for Dark Bluish Gray Color to {4235339}
Note: These track parts appear to be assemblies. Looks like some electrical conductors might be attached to the track itself. I found Design ID 74746 with Element ID 4235339 for color 199 Dark Stone Gray.
For Dark Gray, please add ID 74746 as an Element ID. Do not add 286527 or 4192045. Those two IDs appear to belong to the track minus the conductors. Have a look at the other track pieces, but please do not add any IDs until I've confirmed which ones should be added here.
Please do not add 4210930. I believe 4190054 belongs to this assembly, but I'll add that one myself once I can confirm that. Thanks!
Change Part Color Code 1 for Trans-Neon Orange Color to {81817}
Note: The 80000 ID here didn't make sense to me before, but upon discovering the other Trans-Brown ID, I thought back to this one. 81817 would have first been used in the mid-90s. Most of these printed element IDs were formatted this way. Please remove '81817' from the generic entry.
Note: Note: If I do not add an ID that BO has, then it is because their entry has the ID for the unprinted part, which doesn't belong here. 6845 might also be worth renaming 6845c01.
Note: A seller claims that the “Trans-Clear part is scratched”. I just realized that 6896 is categorized under “Loose Parts”, so this might also be an assembly. The other entries and all sticker entries should be changed. PCCs should be removed. 30086 sticker boat entries should also be changed.