Change Part Color Code 2 for Red Color to {4612532}
Note: This ID was found through Bricks & Pieces. Searching for it gives the results of 4622390, seemingly indicating that they are considered interchangeable. It appears to use the design ID of 54821 rather than 95753, however.
Change Item Name from {Ball, Bionicle Zamor Sphere with Marbled Trans-Bright Green Pattern} to {Ball, Bionicle Zamor Sphere with Marbled Green Pattern}
Note: This part is the result of marbling Trans-Yellow and Green (TLG 28 Dark Green), as visible in the extreme cases. Trans-Bright Green was not a color in 2006.
Change Part Color Code 1 for Yellow Color to {4193849}
Note: Here’s a cool one. The Orange ID also belongs to this part. I don’t know why their entry has both the cloth part and the decorated cockpit piece.
Change Item Name from {Slope, Curved 4 x 2 x 2 Double with 4 Studs with Animal (Dinosaur / Gorilla) Face Pattern} to {Slope, Curved 4 x 2 x 2 Double with 4 Studs with Medium Orange Animal (Dinosaur / Gorilla) Face Pattern}
Note: This part should be split in 3 different parts as it contains 3 variants for the pattern:
- Light Blue pattern for Blue part
- Light Green pattern for Green part
- Medium Orange pattern for Red and Yellow parts
Note: The Brown and Gray ID numbers are missing because this part number does not belong to this part. 42042 is called “BIONICLE GIMMIC” in the parts database.
The 42042 ID is a catch-all for the various masks used in the 2002-03 Bionicle run, much like the Kraata IDs are a catch-all for the different stages one can find. Each Krana mask should have all 19 ID numbers, including the unused Pearl Black ID. That part was originally supposed to appear in set 8573.
Note: Part ID was found in the official Unity Parts database (m34684) and corresponds with m34685, the part ID for the scarf used by the same minifigure which uses the shield.
Change Item Name from {Homemaker Figure / Maxifigure Headgear Hair Short} to {Hair WITH Side studs}
Note: Hi. there are 2 different versions of this part: one hasn't side studs, one version HAS side studs to attach headgear - see Set 215-1. Sam issue for x196. Both parts should have own dual parts listings for each version.
Change Packing Dimensions from {0.64 x 0.48 x 13.68} to {0.64 x 12.8 x 0.5}
Note: Part 39759 is significantly shorter than the older type 30104 (0.64 x 13.68 x 0.48). Part 30104 should be separated and the new types given as a separate item too. 39759 is matte, but 30104 is shiny. Production ended in 2006 with black color.
Change Item Name from {Brick, Modified Facet 3 x 3 x 2 Top} to {Wedge 3 x 3 x 2 Facet Top (Slope Corner)} Change Category from {Brick, Modified} to {Wedge}
Change Part Color Code 1 for Orange Color to {6014005}
Note: 93789 is not the design number for the flat end variant. 93789 is another one of those unique Chinese factory design numbers that only appears in special sets. the flat end variant should be 4497b. All 93789 PCCs belong under the 4497 entry. the modern spear variant doesn’t appear to have a design number of its own, so it’ll likely share a few element numbers with its predecessor.
Change Item Name from {Sticker Sheet for Set 2000421 - (15607/6051881)} to {Sticker Sheet for FIRST LEGO League Trophy - (15607/6051881)} Change Item No from {2000421stk01} to {FLLstk01}
Note: This sticker is the same for the 3 size trophies. After that it can be added to the other 2 inventories.
Change Item Name from {Support 31 x 13 Girder, Trapezoid with Orange and White Danger Stripes Pattern (Sticker) - Set 4210} to {Technic, Liftarm, Modified Girder Thick 31 x 13, Trapezoid with Orange and White Danger Stripes Pattern (Sticker) - Set 4210} Change Category from {Support} to {Technic, Liftarm, Decorated}
Change Item Name from {Support 31 x 13 Girder, Trapezoid} to {Technic, Liftarm, Modified Girder Thick 31 x 13, Trapezoid} Change Category from {Support} to {Technic, Liftarm}
Change Item Name from {Support 11 x 11 Girder, Round} to {Technic, Liftarm, Modified Girder Thick 11 x 11, Round Open Center} Change Category from {Support} to {Technic, Liftarm}
Note: Sorry, the other first name change should be 15 x 15!!!
Change Item Name from {Support 15 x 15 Girder, Round} to {Technic, Liftarm, Modified Girder Thick 11 x 11, Round Open Center} Change Category from {Support} to {Technic, Liftarm}
Note: This and the other 3 have no studs like the other supports, they are more similar to other Liftarm, modified.
Note: Going back and removing any IDs associated with loose parts. This piece should be an assembly. I’m not sure where you guys are getting some of these other IDs, but this might also be worth looking for, if possible. These should all be deleted. Part number might also have to be changed. Same applies to 6789.
Change Part Color Code 1 for Dark Bluish Gray Color to {4235339}
Note: These track parts appear to be assemblies. Looks like some electrical conductors might be attached to the track itself. I found Design ID 74746 with Element ID 4235339 for color 199 Dark Stone Gray.
For Dark Gray, please add ID 74746 as an Element ID. Do not add 286527 or 4192045. Those two IDs appear to belong to the track minus the conductors. Have a look at the other track pieces, but please do not add any IDs until I've confirmed which ones should be added here.
Please do not add 4210930. I believe 4190054 belongs to this assembly, but I'll add that one myself once I can confirm that. Thanks!
Change Part Color Code 1 for Trans-Neon Orange Color to {81817}
Note: The 80000 ID here didn't make sense to me before, but upon discovering the other Trans-Brown ID, I thought back to this one. 81817 would have first been used in the mid-90s. Most of these printed element IDs were formatted this way. Please remove '81817' from the generic entry.
Note: Note: If I do not add an ID that BO has, then it is because their entry has the ID for the unprinted part, which doesn't belong here. 6845 might also be worth renaming 6845c01.
