Change Part Color Code 1 for Yellow Color to {4112990}
Note: i have just finished looking through 4112xxx. this thing happens to be at the very end of it. i will be adding 4107000 IDs next. there are many of them, so I will wait until the most recent ones have been accepted.
Change Part Color Code 1 for Light Gray Color to {249352}
Note: +50 IDs *seem* to be contextual to 1991-1993
i figure these and the standard IDs can go under either/both variants.
why does 2493a's page say that it last appeared in 1996? it did not appear in 1996, and there are many BL pages that do this. are these updated manually or am I missing something?
Change Part Color Code 1 for Light Gray Color to {4105187}
Note: keeping this here because you might be able to confirm what it is. I do not know if BO's classification of this part as "yellow" is correct. this ID is contextual to 1997, which is when gray ones start showing up again.
Note: see if Russell can make sense of this item. It is called “DELETED”.
and since BO’s item number display format is a bit of a mess, it would be helpful to get an ID for that Medium Reddish Violet inflatable boat. is it 4111918 or 4111919?
Change Item Name from {Tile 2 x 2 with Tickets Yellow Background Pattern (Sticker) - Set 10041} to {Tile 2 x 2 with Tickets Yellow Background Pattern (Sticker) - Set 6390/10041}
Note: Date change to 1980-2003. There is not an entry for this part with the initial 1980 Main Street although it was on the original sticker sheet.
Change Part Color Code 1 for Trans-Green Color to {81800}
Note: alternate design ID 81800. some of these old printed parts are weird. the unprinted part entry gets IDs in both the unprinted version and the decorated version, despite belonging to different parts.
81817 is the other odd one out. this should belong to the aquasharks windscreen.
Change Item Name from {Vehicle, Fairing 1 x 2 Stepped with Two Pins} to {Large Figure Armor Plate, KK Leg Lower Section} Change Category from {Vehicle} to {Large Figure Part}
Note: Part was introduced for the five Knights' Kingdom Large Figures of 2004. Reuse in the remaining 5 sets lack through-line and is simply creative repurposing.
Change Part Color Code 2 for Red Color to {4612532}
Note: This ID was found through Bricks & Pieces. Searching for it gives the results of 4622390, seemingly indicating that they are considered interchangeable. It appears to use the design ID of 54821 rather than 95753, however.
Change Item Name from {Ball, Bionicle Zamor Sphere with Marbled Trans-Bright Green Pattern} to {Ball, Bionicle Zamor Sphere with Marbled Green Pattern}
Note: This part is the result of marbling Trans-Yellow and Green (TLG 28 Dark Green), as visible in the extreme cases. Trans-Bright Green was not a color in 2006.
Change Part Color Code 1 for Yellow Color to {4193849}
Note: Here’s a cool one. The Orange ID also belongs to this part. I don’t know why their entry has both the cloth part and the decorated cockpit piece.
Change Item Name from {Slope, Curved 4 x 2 x 2 Double with 4 Studs with Animal (Dinosaur / Gorilla) Face Pattern} to {Slope, Curved 4 x 2 x 2 Double with 4 Studs with Medium Orange Animal (Dinosaur / Gorilla) Face Pattern}
Note: This part should be split in 3 different parts as it contains 3 variants for the pattern:
- Light Blue pattern for Blue part
- Light Green pattern for Green part
- Medium Orange pattern for Red and Yellow parts
Note: The Brown and Gray ID numbers are missing because this part number does not belong to this part. 42042 is called “BIONICLE GIMMIC” in the parts database.
The 42042 ID is a catch-all for the various masks used in the 2002-03 Bionicle run, much like the Kraata IDs are a catch-all for the different stages one can find. Each Krana mask should have all 19 ID numbers, including the unused Pearl Black ID. That part was originally supposed to appear in set 8573.
Note: Part ID was found in the official Unity Parts database (m34684) and corresponds with m34685, the part ID for the scarf used by the same minifigure which uses the shield.
Change Item Name from {Homemaker Figure / Maxifigure Headgear Hair Short} to {Hair WITH Side studs}
Note: Hi. there are 2 different versions of this part: one hasn't side studs, one version HAS side studs to attach headgear - see Set 215-1. Sam issue for x196. Both parts should have own dual parts listings for each version.
Change Packing Dimensions from {0.64 x 0.48 x 13.68} to {0.64 x 12.8 x 0.5}
Note: Part 39759 is significantly shorter than the older type 30104 (0.64 x 13.68 x 0.48). Part 30104 should be separated and the new types given as a separate item too. 39759 is matte, but 30104 is shiny. Production ended in 2006 with black color.
Change Item Name from {Brick, Modified Facet 3 x 3 x 2 Top} to {Wedge 3 x 3 x 2 Facet Top (Slope Corner)} Change Category from {Brick, Modified} to {Wedge}
Change Part Color Code 1 for Orange Color to {6014005}
Note: 93789 is not the design number for the flat end variant. 93789 is another one of those unique Chinese factory design numbers that only appears in special sets. the flat end variant should be 4497b. All 93789 PCCs belong under the 4497 entry. the modern spear variant doesn’t appear to have a design number of its own, so it’ll likely share a few element numbers with its predecessor.
Change Item Name from {Sticker Sheet for Set 2000421 - (15607/6051881)} to {Sticker Sheet for FIRST LEGO League Trophy - (15607/6051881)} Change Item No from {2000421stk01} to {FLLstk01}
Note: This sticker is the same for the 3 size trophies. After that it can be added to the other 2 inventories.
Change Item Name from {Support 31 x 13 Girder, Trapezoid with Orange and White Danger Stripes Pattern (Sticker) - Set 4210} to {Technic, Liftarm, Modified Girder Thick 31 x 13, Trapezoid with Orange and White Danger Stripes Pattern (Sticker) - Set 4210}
